Find work in Canada.

319,804 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 4 mins ago
BC
mechanic, truck
Buckingham Chevrolet Buick GMC
Gatineau, QC
- Full-time
Confirm findings with supervisor to determine whether to repair or replace unit
Added 5 mins ago
VA
Aircraft Certification Authority (ACA) - (Non-Deployed)
Voyageur Aviation
Trenton, ON
- Full-time
…(ACA) - (Non-Deployed) (Trenton, Ontario), will report to the Supervisor, Line Maintenance, and will be part of the crew responsible for performing and monitoring maintenance on company…
Added 5 mins ago
VA
Aircraft Certification Authority (ACA) - (Non-Deployed)
Voyageur Aviation
Kingston, ON
- Full-time
…(ACA) - (Non-Deployed) (Trenton, Ontario), will report to the Supervisor, Line Maintenance, and will be part of the crew responsible for performing and monitoring maintenance on company…
Added 20 mins ago
GH
Water Operator level I
Groupe Helios
Fort St. John, BC
- Full-time
Working under the guidance of the supervisor, you're responsible for conducting the daily operation and maintenance of the Water & Wastewater facilities. This position will report to the…
Added 1 hour ago
LPN 1.0 Perm Nights 2nd-005
Winnipeg Regional Health Authority
Winnipeg, MB
SUPERVISOR’S TITLE: Director of Care or Designate
Added 2 hours ago
B
Mechanical & Rotating Supervisor
Brunel
Fort Saskatchewan, AB
- Contract
Brunel is seeking a Mechanical and Rotating Supervisor who has hands-on field supervisory experience who has previously installed large compressor and turbine packages, understands vendor…
Added 2 hours ago
AL
machine operator - food and beverage processing
Aliments LUDA Foods
Pointe-Claire, QC
- Full-time
Inform supervisor of mechanical malfunctions or product irregularities
Added 2 hours ago
AL
machine operator - food and beverage processing
Aliments LUDA Foods
Pointe-Claire, QC
- Full-time
Inform supervisor of mechanical malfunctions or product irregularities
Added 2 hours ago
TT
truck and coach technician
Truck Trailer Coach Repair
Brampton, ON
- Full-time
Confirm findings with supervisor to determine whether to repair or replace unit
Added 2 hours ago
A
Excavator Operator
ARCP
Dartmouth, NS
- Full-time
Strong mechanical aptitude with ability to perform routine equipment maintenance.
Added 3 hours ago
PH
Health Care Worker - Maximum and Multi-Level Security Units
Provincial Health Services Authority
Port Coquitlam, BC
- Part-time
Added 3 hours ago
PH
Supervisor, Facilities Maintenance & Operations
Provincial Health Services Authority
Vancouver, BC
- Full-time
Job Title:SUPERVISOR, FACILITIES MAINTENANCE & OPERATIONSRequisition #:205083Job Location:Canada-British Columbia-VancouverDepartment:Plant Maintenance-UNDiffJob Type:Regular, Full…
Added 4 hours ago
GE
Hotel 1st Cook Little Chief 1pm to 9:30 Pm
Grey Eagle Resort & Casino
Calgary, AB
- Full-time
Under the direction of the Executive Chef, Executive Sous Chef, Sous Chef or Supervisor, the Food Truck Handler / Cook is responsible for the safe operation, transportation, setup, food…
Added 4 hours ago
SI
Electrician
Saputo Inc.
Port Coquitlam, BC
- Full-time
Excellent mechanical skills and ability to carry out general plant/ equipment maintenance
Added 6 hours ago
II
truck mechanic
Insta-Mix Inc
Montreal, QC
- Full-time
Confirm findings with supervisor to determine whether to repair or replace unit
Added 8 hours ago
TS
Driver
The Salvation Army in Canada
Ajax, ON
- Part-time
Report any vehicle mechanical failures or concerns to the Corps Officer in a timely manner.
Added 8 hours ago
EG
Millwright
Equinox Gold Corp.
Geraldton, ON
- Full-time
We are seeking a Millwright to join our team. Reporting to the Mill Mechanical Supervisor, the Millwright is responsible for providing repairs, overhauls, and new builds to mining related…
Added 8 hours ago
PB
Shift Engineer Pitampura
Pacific Business Park Sahibabad
AB · Wood Buffalo, AB
- Full-time
To work with the operators and technicians to ensure that all personnel are familiar with all aspects of the mechanical and electrical plant.
Added 10 hours ago
COORDINATOR VENDOR MANAGEMENT
City of Toronto
Toronto, ON
Reporting to the Supervisor of Contracted Services, the Coordinator Vendor Management (Contracted Services) plays a critical role in ensuring the effective delivery of contracted facilities…
Added 10 hours ago
Equipment Operator II - Snow Clearing
RESORT MUNICIPALITY OF WHISTLER
Whistler, BC
…Operator II – Snow Clearing. Reporting to the Landscape Services Supervisor, this position offers 76.5 hours bi-weekly, starting on November 18, 2026, until March 31,…
Added 10 hours ago
Production Shift Supervisor
Amrize
Saint-Constant, QC · St-Constant, Queb
Join Amrize as a Production Shift Supervisor and help construct what's next. If you're ready to put your skills to work on projects that matter - and build a career with a company that’s…
Added 11 hours ago
GC
Senior Engineer, MaintenanceNew
Glencore Canada
Elkford, BC
- $123,000 to $145,000 CAD / year
- Full-time
Reporting to the Senior Supervisor, Engineer the Senior Engineer, Maintenance is responsible
Added 11 hours ago
SI
Electrician
Saputo Inc.
Port Coquitlam, BC
- Full-time
Excellent mechanical skills and ability to carry out general plant/ equipment maintenance
Added 11 hours ago
AI
Human Resources Business Partner
ATS Industrial Automation
Woodbridge, ON
- Full-time
Added 11 hours ago
C
Building Operator
CBRE
Vancouver, BC
- Full-time
Inspects/operates/maintains and repairs mechanical/electrical systems and equipment (including boilers, chillers, HVAC equipment, pumps, generators, life safety system, etc.)

Active Dynamics

Process Development Engineer

Toronto, ON, Canada

$62,000 to $72,000 CAD / year · Full-time

Apply About employer

Applications open in a new tab.

Job details

Pay: $62,000 to $72,000 CAD / year
Job type: Full-time
Apply by: Jan 3, 2027
Experience: 0-3 years of hands-on experience in a metal fabrication environment, preferably automotive.
Posting language: English
Posted: Oct 5, 2026

Original job description

Active Dynamics is a progressive OEM supplier that designs, tests, and manufactures unique solutions for multiple systems and multiple industries. This full-service, end-to-end capabilities are paired with a collaborative, creative approach, global reach, and agile structure to offer real-world benefits in terms of turnaround time, cost, service, and customization. We're always growing, always evolving, and always finding new ways to bring meaningful value to our customers and partners.

As a world leader in the design and manufacturing industry, Active Dynamics is seeking an eager and enthusiastic experienced Process Development Engineer (NPI & Production Support) to join our successful Toronto team! We are looking for a talent with solid professional skills in the manufacturing industry who can provide superb work experience. This posting is for an existing, immediate vacancy.

This position is responsible for developing fabrication process, provide technical expertise and guidance on fabrication processes, execute improvement initiatives, and ensure that systems and processes are in place to meet and exceed ADG's quality and production objectives safely and efficiently.

Duties and Responsibilities:

Work with senior team members and develop and implement complete fabrication process for new programs and ECNs to achieve production and quality signoff and flawless launch as per internal and customer timing/deadlines/milestones standards and requirements.
Review/analyze component/assembly drawings, participate in internal PFD review meetings and provide subject matter expertise/input to produce the part repeatably as per internal and customer standards and requirements. Provide input during quoting phase as required.
Provide input in tooling design, machine selection & establishment of process parameters
Participate in cross functional APQP meetings to provide input in DFM and GDT analysis, PFMEA, control plans, process capability studies, DOE's, poka-yoke, error proof plans, root cause analysis, and lessons learned.
Coordinate pilot build with prototype development department, document & communicate lessons learned to Product/Project Engineer/Process Development Manager & ensure the lessons learned are effectively carried over to the production process.
Collaborate with Manufacturing Engineer responsible for BOM/routing set up after tooling validation & ensure any changes to the process flow are communicated & updated in the system.
Coordinate all tooling validation sample runs at supplier(s) and at ADG to ensure a successful run at rate milestone completion based on TAKT time, internal AQPQ and customer PPAP requirements and standards.
Capable of reading and evaluating CMM reports, quality inspection data, capability reports to provide feedback on process (tooling, equipment) changes required to achieve product capability as per internal and customer standards.
Provide input in evaluating equipment trial runs and buy offs for new equipment and retrofits and ensure run and rate, PPH and essential safety regulations are met per ADG, OHSA, ESA and CSA standards.
Conduct training for associates on new equipment and processes, monitor progress and ensure timely and effective handover to production and maintenance using ADG standard Machine Handover Checklist.
Establish machine process parameters for all new programs and continuously monitor to improve and optimize.
Prepare, release, maintain and update standardized work instructions, operator instructions, job element sheets, troubleshooting guide(s) for process & equipment.
Provide technical support to production to resolve fabrication process capability and quality issues.
Communicate with Maintenance and/or Operation Manager on tooling problems related to production.
Review daily shift and quality reports for top process issues. Discuss with Operations manager, Production Supervisor, Lead Hand and/or Process Development Manager to resolve the issues.
Co-ordinates the implementation of ECN’s (Engineering Change Notices), internally or customer driven.
Involve in process and equipment root cause analysis initiatives and implement solutions to improve and sustain OEE to ADG standards.
Maintain an open issues matrix for assigned projects and tasks and ensure timely completion as agreed with the direct manager.
Participate in 8D, 5 Why’s, RCA, CI meetings for customer complaints, failures and provide appropriate input to resolve issues.
Assist in reviewing program profitability and provide ideas to reduce waste in the value chain by effectively utilizing lean manufacturing principles.
Work closely with Maintenance/Tooling Manager and skill trades team to increase machine uptime, conduct RCA on equipment issues and follow up on closure.
Support the implementation of best practices for the department and the development, monitoring, and application of KPI’s (productivity, cost, quality, safety).
Performs other duties as assigned.

Educational Requirement:

Mechanical Engineering degree/diploma.
Lean Six Sigma Black Belt or Green Belt desirable.

Qualifications and Experience:

0-3 years of hands-on experience in a metal fabrication environment, preferably automotive.
Experience with tube bending process a definite asset.
Good in blueprint reading and interpretation, and operation of tool room and production equipment (grinding, milling, lathe etc.).
Strong communication skills.
Team player who thrives in a fast-paced work environment.
Excellent mathematical and mechanical aptitude.
Excellent trouble-shooting skills for fixtures, cutting tools and Tool Room machinery.
Strategic thinker with the ability to advocate new ideas, cost savings.
Basic understanding of SQC, SPC, GDT methods and techniques.
Intermediate level knowledge of 3D CAD modeling including Creo and AutoCAD.
Intermediate level expertise in MS Office packages (Word, Excel, PowerPoint, OneNote).
Self-motivated and able to work with minimum supervision.
Able to work under extreme demands and tight schedules.
Able to accept directions and change directions as required.
Excellent English language, communication, and presentation skills (both verbal and written).
Basic understanding of WHMIS, IMDS, Ergonomics, Healthy and Safety regulations.
Some travel may be required.

Salary: $62,000 - $72,000 CAD

Our team includes members with a wide diversity of cultural and technical backgrounds, ages, and experiences. We understand that your work at Active should support you no matter your current situation, and we offer several benefits to ensure that your work is fulfilling while respecting your work-life balance:

Competitive compensation and vacation packages based on current industry norms.
Group health benefits.
RRSP matching.
Advancement opportunities and lateral movement based on personal interest and qualification.

We thank all applicants for their interest; however, only those selected for an interview will be contacted. To be considered, candidates must be eligible to work in Canada.

If you are interested in applying, please send us your resume demonstrating your qualifications, skills, and experience.

We are committed to diversity and inclusion. Active is an equal opportunity employer and qualified candidates will be considered regardless of race, colour, religion, sex, sexual orientation, gender identity, cultural or national background, marital status, disability status, and any other basis protected by Ontario law.

Under the Accessibility for Ontarians with Disabilities Act (AODA), Active Dynamics provides accommodation support throughout the recruitment process upon request. If you require accommodation at any point throughout the recruitment process, please let us know.

Apply About employer

More about this job

Responsibilities

The Process Development Engineer is responsible for developing and implementing fabrication processes for new programs while providing technical expertise to ensure quality and production objectives are met. They will coordinate pilot builds, manage tooling validation, and conduct root cause analysis to optimize manufacturing efficiency.

Requirements

Candidates must hold a degree or diploma in Mechanical Engineering and possess 0-3 years of hands-on experience in a metal fabrication environment. Proficiency in blueprint reading, 3D CAD modeling, and knowledge of manufacturing quality standards like GDT and SPC are required.

Skills

Process development
Manufacturing engineering
Metal fabrication
Blueprint reading
Tooling design
APQP
PPAP
Root cause analysis
Lean manufacturing
CMM report evaluation
Creo
AutoCAD
MS Office
GDT
SPC
Tube bending

Benefits

Competitive compensation
Vacation packages
Group health benefits
RRSP matching
Advancement opportunities

Visa sponsorship

Not detected in the job text

Keywords

Process Development
Manufacturing
Metal Fabrication
Automotive
Tube Bending
Blueprint Reading
Tooling
APQP
PPAP
DFM
GDT
PFMEA
DOE
CMM
Lean Six Sigma
Creo
AutoCAD
Root Cause Analysis
OEE
8D
5 Why
WHMIS
IMDS
Ergonomics
Safety Regulations
Production Support
NPI
ECN
TAKT Time
Quality Inspection

Report this job