Find work in Canada.

320,889 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 1 hour ago
PA
GENERAL MANAGER
Professional Association of Canadian Theatres (PACT)
Orangeville, ON
- Part-time
OverviewThe General Manager will be responsible for overseeing the administrative, human resource and operational management of the theatre; will work with the Artistic Director to…
Added 1 hour ago
SH
Front Desk Manager
Sheraton Hotels & Resorts
Toronto, ON
- Full-time
Assists the Front Office Manager in administering front office functions and supervising staff on a daily basis. Front office areas include Bell/Door Staff, Switchboard and Guest…
Added 2 hours ago
DH
Assistant Rooms Operations Manager
Delta Hotels and Resorts®
AB · Edmonton, AB
- Full-time
Participates in department meetings and continually communicating a clear and consistent message regarding the Room Operations goals to produce desired results.
Added 4 hours ago
Production Shift Supervisor
Amrize
Saint-Constant, QC · St-Constant, Queb
Produce the forecasted quantities and quality of raw mix, clinker and cement while minimizing non-compliance.
Added 5 hours ago
A
Senior Incident and Problem Manager
Aviso
Toronto, ON
- $115,000 to $125,000 CAD / year
- Full-time
We're looking to fill an opening for a Senior Incident and Problem Manager to join our Technology Ops & Support Partners team.
Added 5 hours ago
FC
Green - Programmer/Analyst
FuntoNetwork Consulting
Ottawa, ON
- $65 to $139 USD / hour
- Contract
Client / Source: Department of Canadian Heritage
Added 5 hours ago
FC
Green - Business Analyst
FuntoNetwork Consulting
Ottawa, ON
- $65 to $139 USD / hour
- Contract
Client / Source: Department of Canadian Heritage
Added 5 hours ago
FC
Green - Project Executive
FuntoNetwork Consulting
Ottawa, ON
- $65 to $139 USD / hour
- Contract
Client / Source: Department of Canadian Heritage
Added 5 hours ago
FC
Green - Business Consultant
FuntoNetwork Consulting
Ottawa, ON
- $65 to $139 USD / hour
- Contract
Client / Source: Department of Canadian Heritage
Added 5 hours ago
FC
Green - Technology Architect
FuntoNetwork Consulting
Ottawa, ON
- $65 to $139 USD / hour
- Contract
Client / Source: Department of Canadian Heritage
Added 5 hours ago
FC
Green - Project Manager
FuntoNetwork Consulting
Ottawa, ON
- $65 to $139 USD / hour
- Contract
Client / Source: Department of Canadian Heritage
Added 5 hours ago
FC
Green - Application/Software Architect
FuntoNetwork Consulting
Ottawa, ON
- $65 to $139 USD / hour
- Contract
Client / Source: Department of Canadian Heritage
Added 5 hours ago
FC
Green - Quality Assurance Specialist
FuntoNetwork Consulting
Ottawa, ON
- $65 to $139 USD / hour
- Contract
Client / Source: Department of Canadian Heritage
Added 5 hours ago
FC
Green - Information Management Architect
FuntoNetwork Consulting
Ottawa, ON
- $65 to $139 USD / hour
- Contract
Client / Source: Department of Canadian Heritage
Added 6 hours ago
A
Senior Incident and Problem Manager
Aviso
Vancouver, BC
- $115,000 to $125,000 CAD / year
- Full-time
We're looking to fill an opening for a Senior Incident and Problem Manager to join our Technology Ops & Support Partners team.
Added 6 hours ago
TM
Digital Media Specialist
Toronto Metropolitan University
Toronto, ON
- Temporary
…Digital Content Assistant, The Digital Media Specialist will produce content for Bridging Divides at the Global Migration Institute web and social media. You will provide design, technical…
Added 6 hours ago
HR
Technical Safety Specialist
Hitachi Rail
Toronto, ON
- Full-time
The Safety Engineering department is responsible for the safety of the products and project solutions developed and deployed by the Urban Rail Signaling business line and compliance to…
Added 6 hours ago
HR
Technical Safety Specialist
Hitachi Rail
Burnaby, BC
- Full-time
The Safety Engineering department is responsible for the safety of the products and project solutions developed and deployed by the Urban Rail Signaling business line and compliance to…
Added 7 hours ago
S
Senior Manager, Content & Brand (CAN/USA)
Solink
Remote, Canada
- Full-time
- Remote
This is an M3 level role - Solink's Senior Manager archetype. At Solink, individuals at this level are key leaders within their department: they effectively manage their team, provide…
Added 9 hours ago
AD
Process Development Engineer
Active Dynamics Group
Toronto, ON
- Full-time
Coordinate pilot build with prototype development department, document & communicate lessons learned to Product/Project Engineer/Process Development Manager & ensure the lessons learned are…
Added 9 hours ago
AD
Process Development Engineer
Active Dynamics
Toronto, ON
- $62,000 to $72,000 CAD / year
- Full-time
Coordinate pilot build with prototype development department, document & communicate lessons learned to Product/Project Engineer/Process Development Manager & ensure the lessons learned are…
Added 9 hours ago
AW
Senior Incident and Problem Manager
Aviso Wealth
Remote, Canada
- $115,000 to $125,000 CAD / year
- Full-time
- Remote
We’re looking to fill an opening for a Senior Incident and Problem Manager to join our Technology Ops & Support Partners team.
Added 9 hours ago
AW
Senior Incident and Problem Manager
Aviso Wealth
Remote, Canada
- $115,000 to $125,000 CAD / year
- Full-time
- Remote
We’re looking to fill an opening for a Senior Incident and Problem Manager to join our Technology Ops & Support Partners team.
Added 10 hours ago
CO
Aquafit Instructor - Certified
City of Brampton
Brampton, ON
- Temporary
…collected is confidential and will not be shared with the hiring manager. The surveys will be anonymized and will be kept separate from applicant or employee files, such that the…
Added 10 hours ago
FS
Account Manager
Fresh Start Foods Canada Ltd.
Richmond, BC
- Full-time
For more than 30 years, Fresh Start Foods has proudly delivered a full range of fresh produce solutions to customers across Canada. As a valued member of the Gordon Food Service (GFS)…

Active Dynamics

Process Development Engineer

Toronto, ON, Canada

$62,000 to $72,000 CAD / year · Full-time

Apply About employer

Applications open in a new tab.

Job details

Pay: $62,000 to $72,000 CAD / year
Job type: Full-time
Apply by: Jan 3, 2027
Experience: 0-3 years of hands-on experience in a metal fabrication environment, preferably automotive.
Posting language: English
Posted: Oct 5, 2026

Original job description

Active Dynamics is a progressive OEM supplier that designs, tests, and manufactures unique solutions for multiple systems and multiple industries. This full-service, end-to-end capabilities are paired with a collaborative, creative approach, global reach, and agile structure to offer real-world benefits in terms of turnaround time, cost, service, and customization. We're always growing, always evolving, and always finding new ways to bring meaningful value to our customers and partners.

As a world leader in the design and manufacturing industry, Active Dynamics is seeking an eager and enthusiastic experienced Process Development Engineer (NPI & Production Support) to join our successful Toronto team! We are looking for a talent with solid professional skills in the manufacturing industry who can provide superb work experience. This posting is for an existing, immediate vacancy.

This position is responsible for developing fabrication process, provide technical expertise and guidance on fabrication processes, execute improvement initiatives, and ensure that systems and processes are in place to meet and exceed ADG's quality and production objectives safely and efficiently.

Duties and Responsibilities:

Work with senior team members and develop and implement complete fabrication process for new programs and ECNs to achieve production and quality signoff and flawless launch as per internal and customer timing/deadlines/milestones standards and requirements.
Review/analyze component/assembly drawings, participate in internal PFD review meetings and provide subject matter expertise/input to produce the part repeatably as per internal and customer standards and requirements. Provide input during quoting phase as required.
Provide input in tooling design, machine selection & establishment of process parameters
Participate in cross functional APQP meetings to provide input in DFM and GDT analysis, PFMEA, control plans, process capability studies, DOE's, poka-yoke, error proof plans, root cause analysis, and lessons learned.
Coordinate pilot build with prototype development department, document & communicate lessons learned to Product/Project Engineer/Process Development Manager & ensure the lessons learned are effectively carried over to the production process.
Collaborate with Manufacturing Engineer responsible for BOM/routing set up after tooling validation & ensure any changes to the process flow are communicated & updated in the system.
Coordinate all tooling validation sample runs at supplier(s) and at ADG to ensure a successful run at rate milestone completion based on TAKT time, internal AQPQ and customer PPAP requirements and standards.
Capable of reading and evaluating CMM reports, quality inspection data, capability reports to provide feedback on process (tooling, equipment) changes required to achieve product capability as per internal and customer standards.
Provide input in evaluating equipment trial runs and buy offs for new equipment and retrofits and ensure run and rate, PPH and essential safety regulations are met per ADG, OHSA, ESA and CSA standards.
Conduct training for associates on new equipment and processes, monitor progress and ensure timely and effective handover to production and maintenance using ADG standard Machine Handover Checklist.
Establish machine process parameters for all new programs and continuously monitor to improve and optimize.
Prepare, release, maintain and update standardized work instructions, operator instructions, job element sheets, troubleshooting guide(s) for process & equipment.
Provide technical support to production to resolve fabrication process capability and quality issues.
Communicate with Maintenance and/or Operation Manager on tooling problems related to production.
Review daily shift and quality reports for top process issues. Discuss with Operations manager, Production Supervisor, Lead Hand and/or Process Development Manager to resolve the issues.
Co-ordinates the implementation of ECN’s (Engineering Change Notices), internally or customer driven.
Involve in process and equipment root cause analysis initiatives and implement solutions to improve and sustain OEE to ADG standards.
Maintain an open issues matrix for assigned projects and tasks and ensure timely completion as agreed with the direct manager.
Participate in 8D, 5 Why’s, RCA, CI meetings for customer complaints, failures and provide appropriate input to resolve issues.
Assist in reviewing program profitability and provide ideas to reduce waste in the value chain by effectively utilizing lean manufacturing principles.
Work closely with Maintenance/Tooling Manager and skill trades team to increase machine uptime, conduct RCA on equipment issues and follow up on closure.
Support the implementation of best practices for the department and the development, monitoring, and application of KPI’s (productivity, cost, quality, safety).
Performs other duties as assigned.

Educational Requirement:

Mechanical Engineering degree/diploma.
Lean Six Sigma Black Belt or Green Belt desirable.

Qualifications and Experience:

0-3 years of hands-on experience in a metal fabrication environment, preferably automotive.
Experience with tube bending process a definite asset.
Good in blueprint reading and interpretation, and operation of tool room and production equipment (grinding, milling, lathe etc.).
Strong communication skills.
Team player who thrives in a fast-paced work environment.
Excellent mathematical and mechanical aptitude.
Excellent trouble-shooting skills for fixtures, cutting tools and Tool Room machinery.
Strategic thinker with the ability to advocate new ideas, cost savings.
Basic understanding of SQC, SPC, GDT methods and techniques.
Intermediate level knowledge of 3D CAD modeling including Creo and AutoCAD.
Intermediate level expertise in MS Office packages (Word, Excel, PowerPoint, OneNote).
Self-motivated and able to work with minimum supervision.
Able to work under extreme demands and tight schedules.
Able to accept directions and change directions as required.
Excellent English language, communication, and presentation skills (both verbal and written).
Basic understanding of WHMIS, IMDS, Ergonomics, Healthy and Safety regulations.
Some travel may be required.

Salary: $62,000 - $72,000 CAD

Our team includes members with a wide diversity of cultural and technical backgrounds, ages, and experiences. We understand that your work at Active should support you no matter your current situation, and we offer several benefits to ensure that your work is fulfilling while respecting your work-life balance:

Competitive compensation and vacation packages based on current industry norms.
Group health benefits.
RRSP matching.
Advancement opportunities and lateral movement based on personal interest and qualification.

We thank all applicants for their interest; however, only those selected for an interview will be contacted. To be considered, candidates must be eligible to work in Canada.

If you are interested in applying, please send us your resume demonstrating your qualifications, skills, and experience.

We are committed to diversity and inclusion. Active is an equal opportunity employer and qualified candidates will be considered regardless of race, colour, religion, sex, sexual orientation, gender identity, cultural or national background, marital status, disability status, and any other basis protected by Ontario law.

Under the Accessibility for Ontarians with Disabilities Act (AODA), Active Dynamics provides accommodation support throughout the recruitment process upon request. If you require accommodation at any point throughout the recruitment process, please let us know.

Apply About employer

More about this job

Responsibilities

The Process Development Engineer is responsible for developing and implementing fabrication processes for new programs while providing technical expertise to ensure quality and production objectives are met. They will coordinate pilot builds, manage tooling validation, and conduct root cause analysis to optimize manufacturing efficiency.

Requirements

Candidates must hold a degree or diploma in Mechanical Engineering and possess 0-3 years of hands-on experience in a metal fabrication environment. Proficiency in blueprint reading, 3D CAD modeling, and knowledge of manufacturing quality standards like GDT and SPC are required.

Skills

Process development
Manufacturing engineering
Metal fabrication
Blueprint reading
Tooling design
APQP
PPAP
Root cause analysis
Lean manufacturing
CMM report evaluation
Creo
AutoCAD
MS Office
GDT
SPC
Tube bending

Benefits

Competitive compensation
Vacation packages
Group health benefits
RRSP matching
Advancement opportunities

Visa sponsorship

Not detected in the job text

Keywords

Process Development
Manufacturing
Metal Fabrication
Automotive
Tube Bending
Blueprint Reading
Tooling
APQP
PPAP
DFM
GDT
PFMEA
DOE
CMM
Lean Six Sigma
Creo
AutoCAD
Root Cause Analysis
OEE
8D
5 Why
WHMIS
IMDS
Ergonomics
Safety Regulations
Production Support
NPI
ECN
TAKT Time
Quality Inspection

Report this job