Find work in Canada.

322,205 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 8 mins ago
CE
Small Engine Mechanic
Cooper Equipment Rentals Limited
Red Deer, AB
- Full-time
Test and inspect equipment to ensure proper functioning.
Added 8 mins ago
SA
Registered Practical Nurse – Emergency – Temporary Part Time
Sault Area Hospital
Sault Ste. Marie, ON
- Part-time
…be adjusted from time to time. Only those selected for the test/ interview will be…
Added 10 mins ago
Instrumentation Technician Journeyperson - P2Z
Kiewit
Fort Saskatchewan, AB
Candidates offered a position must successfully complete SureHire Drug, Alcohol, an Audiometric test, and 50lb Fitness to Work test
Added 10 mins ago
UO
CUPE - Winter2027 - CORRECTOR 80HR - BCH2733
University of Ottawa
Ottawa, ON · D'Iorio Hall
- Part-time
Candidates who are not graduate students in Chemistry or Biochemistry must pass a qualification test (unless previously completed).
Added 10 mins ago
UO
CUPE - Winter2026 - CORRECTOR 80H - BCH3125
University of Ottawa
Ottawa, ON · D'Iorio Hall
- Part-time
Those who are not graduate students in Chemistry/Biochemistry will be required to write a test to qualify (unless already done).
Added 10 mins ago
UO
CUPE - Winter2027 - TA - CORRECTOR 80H - BCH3120
University of Ottawa
Ottawa, ON · D'Iorio Hall
- Part-time
…students in Chemistry or Biochemistry will be required to write a test to qualify (unless already done); Successful completion of WHIMIS and Occupational Health and Safety…
Added 10 mins ago
B&
Maintenance Electrician (Wind Farms)
Black & McDonald Limited
AB · Edmonton, AB
- Full-time
Identify and test equipment, electronic devices, and electrical equipment
Added 10 mins ago
DA
Service Greeter/Porter - Destination Toyota Burnaby
Destination Auto Group
Burnaby, BC
- $20.88 CAD / hour
- Full-time
Perform other functions such as battery test, trouble code inspection, tire tread depth, etc.
Added 10 mins ago
C
Senior Analyst, Retail Lending Account Management
CIBC
Toronto, ON
- Full-time
We may ask you to complete an attribute-based assessment and other skills test (such as simulation, coding, French proficiency).
Added 38 mins ago
VC
Quality Manager H/F
VINCI Construction Grands Projets Hellas S.A.
Toronto, ON · Greater Toronto Area, Canada
- Full-time
Develop and implement Inspection and Test Plans, from initial trials to full works implementation;
Added 38 mins ago
V
Senior QC Coordinator F/H
VINCI
Toronto, ON
- Full-time
Constantly monitor the Quality inspection and test activities on site and communicates with various team on the project (Construction, Design etc.).
Added 38 mins ago
WC
Quality Control Lead
WestRock Company
Mississauga, ON
- Full-time
…write technical reports and help develop work instruction, test methods and procedures as…
Added 38 mins ago
J
QA Engineer (Early Career) (Canada)
Jobright.ai
Canada
- Full-time
…outcomes. They are seeking a QA Engineer to design and execute test plans, identify bugs, and collaborate with teams to ensure product…
Added 38 mins ago
IL
LIS Application Specialist
In-Common Laboratories (ICL)
Toronto, ON · North York, ON
- Full-time
…the timely, accurate, and uninterrupted exchange of specimen test order information between ICL, its clients, and supplier…
Added 38 mins ago
C
Senior Analyst, Retail Lending Account Management
CIBC
Toronto, ON
- Full-time
We may ask you to complete an attribute-based assessment and other skills test (such as simulation, coding, French proficiency).
Added 38 mins ago
T
Professional Sr Engineering - Avionics Systems
ThoughtStorm
Dorval, QC
- Full-time
You have extensive working experience with system design, test and certification requirements of aircraft auto flight, communication, navigation including FMS, indicating/recording systems,…
Added 38 mins ago
PE
B Pressure Welder By Hand - Air Products
PCL Energy
AB · Edmonton, AB
- Full-time
Must successfully pass a pre-access drug and alcohol test
Added 38 mins ago
B&
Maintenance Electrician (Wind Farms)
Black & McDonald Limited
AB · Edmonton, AB
- Full-time
Identify and test equipment, electronic devices, and electrical equipment
Added 38 mins ago
SS
Electrical Engineer IV
Select Source International
Markham, ON
- $70 to $80 USD / hour
- Contract
Test customized Protection and Control solutions both in house and at customer installations
Added 38 mins ago
PC
Senior Associate -Cyber Security Forward Deployed(Bilingual FR/EN)
PwC Canada
Ottawa, ON
- Full-time
Design, develop, test, and deploy security solutions across cloud (AWS/Azure/GCP) and applications (SDLC integrations, AppSec pipelines)
Added 38 mins ago
E
Customer Issue and Investigation Coop
Ericsson
Ottawa, ON
- Full-time
Execute Test Object List (TOL) test cases for new radios developed within Radio Product Canada (RPCA).
Added 38 mins ago
I
Medical Laboratory Technician (Nights)
IDEXX
Montreal, QC
- Full-time
Added 38 mins ago
T
Flight Control Laws Design
ThoughtStorm
Dorval, QC
- Full-time
…envelope protection requirements, performance requirements, test pilot assessments and aircraft level…
Added 38 mins ago
MB
SPÉCIALISTE PRINCIPAL(E), EDI ET INTÉGRATIONS (Senior EDI & Integrations Specialist)
MADE BY GATHER
Montreal, QC
- Full-time
Added 38 mins ago
H
Senior Test & Validation Engineer
Humanoid
Burnaby, BC
- Full-time
As a Senior Test and Validation Engineer at Humanoid, you will be responsible for bringing new hardware subsystems into a functional, controllable, measurable, and integration-ready state,…

Alchemy

Senior Mechanical Engineer (Onsite)

Waterloo, ON, Canada

$100,000 to $130,000 CAD / year · Full-time

Apply About employer

Applications open in a new tab.

Job details

Pay: $100,000 to $130,000 CAD / year
Job type: Full-time
Apply by: Apr 3, 2027
Experience: 5+ years of hands-on mechanical design and process engineering experience in a manufacturing or product development environment
Posting language: English
Posted: Oct 5, 2026

Original job description

About the Company

Alchemy is a nanotechnology company building breakthrough solutions for the automotive and defence industries. We're transforming legacy sectors by vertically integrating our proprietary nanocoatings into category-defining, ready-to-use products. Our flagship technologies:

ExoShield: the world's leading windshield protection film for the automotive aftermarket
Crypsis Class: a multispectral camouflage coating platform for defence applications

We are at the growth-stage of our journey and are focused on sustainable top-line growth across both our automotive and defence business units. Alchemy is backed by leading investors and incubators in Canada, USA, and France such as Y-Combinator, Stanford-StartX, Pathfinder, Pembroke, NameSilo, and more. Our team is a diverse, tight knit group of engineers, scientists, and business professionals that likes to spend time together in and out of the office, whether that is weekly badminton nights or team lunches. We are a team passionate about cars, cool technology, and working together to dominate the market segments we operate in.

You can learn more about Alchemy at: www.alchemynano.com

About the Role

We're hiring a Senior Mechanical Engineer to take our automotive products from design intent to repeatable production. Our products are precision-fit: each one is engineered to a specific vehicle, which means complex freeform geometry, custom tooling, and tightly controlled manufacturing processes that have to hit both dimensional and optical quality targets. This role owns that engineering chain end to end - digitizing and modelling geometry, designing and sourcing the tooling required to make it, developing and qualifying the process, validating the result, and handing a documented, repeatable process to Manufacturing.

This is a deliberately broad, hands-on senior individual-contributor role. You will be the technical authority on design and process decisions and the person who sets the standards the rest of the team works to. You'll mentor one to two mechanical engineers and co-op students and help raise the technical bar of the team, but your value comes from your own judgment, CAD, and time on the floor rather than from managing headcount. You'll report to the Head of Automotive Technology and work daily with Product, Operations, and Manufacturing.

Salary up to $125,000.00 + equity (experience dependent)

Onsite - Waterloo - 5 days a week

Responsibilities

Design and CAD

Model complex freeform geometry and reverse-engineer parts from 3D measurement data
Own the design standards that drive fit, manufacturability and quality - tolerances, surface treatment, design rules, and part categorization
Lead design reviews and act as the technical approver before designs are committed to tooling
Improve the design pipeline itself: better methods, templates, and automation to remove repetitive work

Tooling

Specify, design and source custom tooling and fixtures, including materials, construction, service conditions, tolerances and inspection criteria
Own tooling through its lifecycle - commissioning, durability, rework and replacement
Balance tooling cost against performance and life, and make the tradeoff explicit rather than implicit

Process development and production handoff

Develop and qualify manufacturing processes for polymer and film-based products, including thermal and pressure-driven forming and finishing operations
Establish robust process windows and understand how the key variables interact, rather than tuning by feel
Diagnose defects to root cause, using structured experimentation and retained evidence
Release processes only when quality, repeatability and durability requirements are all met
Hand processes to Manufacturing with complete work instructions, setup requirements and QC criteria so production can run them without engineering intervention
Support production troubleshooting, equipment tooling, consumable specification and maintenance requirements

Suppliers and cost

Manage tooling, machining and fabrication suppliers: specifications, quoting, purchase orders, quality expectations and technical escalations
Drive cost and cycle-time reduction by evaluating alternative materials, manufacturing routes and sourcing options - with a clear view of the risk each option carries
Build the business case for capital and tooling investment alongside Product and Operations

Testing, validation and engineering data

Define and run test plans: dimensional and optical inspection, functional fit, and accelerated durability and environmental testing
Use DOE and root-cause analysis to answer real product questions rather than settling for one-off trials
Own the engineering record - specifications, SOPs, part and process libraries, and the reporting leadership uses to see program status
Leave the team better documented than you found it: knowledge that lives only in one person's head is a defect in this role's eyes

Team and cross-functional

Mentor one to two mechanical engineers and co-op students - design reviews, CAD coaching and process discipline - without formal people-management responsibility
Partner with Product on requirements and prioritization; with Operations and Manufacturing on scalability, yield and QC; and with our formulation and testing teams on material behaviour

Qualifications

Required:

Must have at a least a Bachelor's or Master's degree in Mechanical Engineering, Manufacturing Engineering, or a related field
5+ years of hands-on mechanical design and process engineering experience in a manufacturing or product development environment
Expert-level 3D CAD, with real strength in surfacing - modelling and reverse engineering complex freeform geometry, not just prismatic parts (SolidWorks preferred)
Experience working with 3D measurement or scan data: point clouds, mesh processing, alignment and deviation analysis, and building manufacturable surfaces from imperfect data
Demonstrated ownership of tooling, mold, die or fixture design through to a working production process
Practical process development experience - you have taken a process from "it worked once" to "production runs it every day without you"
Strong grasp of how materials behave under heat, load and time: thermal expansion, springback and relaxation, and why a part that looks right at the machine can fail later.

We may use AI to help with the screening and interviewing process.

Apply About employer

More about this job

Responsibilities

Own the end-to-end engineering of precision-fit automotive products, from modeling scanned geometry and designing tooling through process development, validation, and documented production handoff. Set technical standards, manage suppliers and cost improvements, support manufacturing, and mentor junior engineers and co-op students.

Requirements

Requires a bachelor’s or master’s degree in Mechanical Engineering, Manufacturing Engineering, or a related field, plus at least five years of hands-on mechanical design and process engineering experience. Candidates need expert 3D CAD and freeform surfacing skills, experience processing scan data and owning tooling through production, and practical knowledge of manufacturing processes and material behavior under heat, load, and time.

Skills

Mechanical Design
3D CAD
Surface Modeling
Reverse Engineering
Tooling Design
Fixture Design
Manufacturing Process Development
Process Qualification
Polymer and Film Forming
Design of Experiments
Root-Cause Analysis
Dimensional and Optical Inspection
Durability Testing
Supplier Management
Technical Mentoring

Benefits

Equity

Visa sponsorship

Not detected in the job text

Keywords

Mechanical Engineering
Manufacturing Engineering
SolidWorks
3D CAD
Freeform Geometry
Surface Modeling
Reverse Engineering
Point Clouds
Mesh Processing
Alignment and Deviation Analysis
Custom Tooling
Molds
Dies
Fixtures
Polymer Products
Film-Based Products
Thermal Forming
Pressure-Driven Forming
Process Windows
Design of Experiments
Root-Cause Analysis
Dimensional Inspection
Optical Inspection
Accelerated Durability Testing
Environmental Testing
Thermal Expansion
Springback
Material Relaxation
Standard Operating Procedures
Manufacturing Process Qualification

Report this job