Find work in Canada.

617,047 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 23 mins ago
F
Principal Electrical Engineer - High Voltage Power Systems
Fluor
Calgary, AB
- Full-time
…interface management, and project execution from concept through commissioning and…
Added 23 mins ago
F
Principal Mechanical Engineer - Power
Fluor
Calgary, AB
- Full-time
…supplier engagement, and project execution from concept through commissioning and performance…
Added 1 hour ago
MPD Technology - Automation Manager
Beyond Energy Services & Technology
Calgary, AB
Oversee loop checks, I/O checks, simulation testing and commissioning at the workshop and on the rig.
Added 1 hour ago
K
Field Service Engineer- Calgary, AB
Kinectrics
Calgary, AB
- Full-time
Position: Field Service Testing Engineer HVST
Added 1 hour ago
CC
Process Engineer
Coca-Cola Canada Bottling Limited
Toronto, ON · North York, ON
- Full-time
The Reliability & Process Engineer is the plant technical owner for asset health, chronic-loss elimination and sustained line performance. Working closely with Operations and Maintenance,…
Added 2 hours ago
F
Advanced Process Support Engineer, Pumps/Cyclones/Valves
FLSmidth
Timmins, ON
- Full-time
The Advanced Process Support Engineer extends the reach of the Pumps, Cyclones, Valves & Knelson (PCV) Sales and Site Support teams into deeper mineral processing questions at customer…
Added 2 hours ago
AC
Senior Commissioning / Test Engineer
Amaris Consulting | Part of Mantu
Mississauga, ON
- Full-time
Commissioning / Test Engineer, Overhead Contact System (OCS)
Added 2 hours ago
F
Advanced Process Support Engineer, Pumps/Cyclones/Valves
FLSmidth
Calgary, AB · Greater Calgary Metropolitan Area
- Full-time
The Advanced Process Support Engineer extends the reach of the Pumps, Cyclones, Valves & Knelson (PCV) Sales and Site Support teams into deeper mineral processing questions at customer…
Added 2 hours ago
F
Advanced Process Support Engineer, Pumps/Cyclones/Valves
FLSmidth
Orillia, ON
- Full-time
The Advanced Process Support Engineer extends the reach of the Pumps, Cyclones, Valves & Knelson (PCV) Sales and Site Support teams into deeper mineral processing questions at customer…
Added 2 hours ago
F
Advanced Process Support Engineer, Pumps/Cyclones/Valves
FLSmidth
Vancouver, BC
- Full-time
The Advanced Process Support Engineer extends the reach of the Pumps, Cyclones, Valves & Knelson (PCV) Sales and Site Support teams into deeper mineral processing questions at customer…
Added 2 hours ago
AC
Engineer, Project
AVI-SPL Canada
Markham, ON
- Contract
As a Project Engineer, you will oversee the technical delivery of AV Integration projects. You will review new projects, finalizing documentation such as the bill of materials, drawings,…
Added 2 hours ago
F
Advanced Process Support Engineer, Pumps/Cyclones/Valves
FLSmidth
Montreal, QC
- Full-time
The Advanced Process Support Engineer extends the reach of the Pumps, Cyclones, Valves & Knelson (PCV) Sales and Site Support teams into deeper mineral processing questions at customer…
Added 2 hours ago
M
Senior Structural Project Engineer
McMillen
Vancouver, BC
- $129,000 to $187,000 CAD / year
- Full-time
McMillen, Inc. is seeking a highly skilled Senior Structural Project Engineer with 8-12 years of experience focused on water resource-related work. The candidate will work in a variety of…
Added 2 hours ago
F
Field Coordinator - Mechanical
FlatironDragados
Toronto, ON · Scarborough, ON
- Full-time
Commissioning of the equipment’s and hand over
Added 2 hours ago
T
Manufacturing System Engineer
Trioworld
Ajax, ON
- $95,000 to $130,000 CAD / year
- Full-time
We are seeking a highly motivated Manufacturing Systems & Automation Engineer with experience in industrial automation, SCADA systems, and software development to join our team. The…
Added 2 hours ago
A
Director, Stations
AECOM
Mississauga, ON
- Full-time
…design into construction, construction oversight, testing, commissioning, and handover. The role supports safe, efficient, and compliant project delivery and a strong customer…
Added 3 hours ago
FC
Principal Mechanical Engineer - Power
Fluor Corporation
Calgary, AB
- Full-time
…supplier engagement, and project execution from concept through commissioning and performance…
Added 3 hours ago
S
Engineer-In-Training, Interconnections
SaskPower
Regina, SK
- Contract
The Engineer-In-Training, Interconnections, is accountable to research, develop and implement tasks, methodologies, and practices for the corporation. As a member of SaskPower’s management…
Added 3 hours ago
S
Structural Engineer- Water
Stantec
Edmonton, AB
- Full-time
Join our Water group as an Intermediate Structural Engineer and help design the water and wastewater infrastructure that communities depend on. Based in one of our Alberta offices, you will…
Added 3 hours ago
FC
Principal Electrical Engineer - High Voltage Power Systems
Fluor Corporation
Calgary, AB
- Full-time
…interface management, and project execution from concept through commissioning and…
Added 4 hours ago
A3
Automation Engineer
Aluminum 3104
Belleville, ON
- Full-time
The Automation & Controls Engineer will serve as the plant’s technical owner for automation and control systems, supporting the startup, commissioning, reliability, and continuous…
Added 4 hours ago
MA
Senior Electrical Engineer
Manpower Alberta
AB · Edmonton, AB
- Contract
We are seeking a highly skilled and experienced Senior Oversight Electrical Engineer to oversee engineering and design aspects of utility-scale solar and wind projects in the USA and…
Added 4 hours ago
TI
Senior OCS Engineer - Testing & Commissioning
Techaxis, Inc
Mississauga, ON
- Full-time
One of our direct client is seeking an enthusiastic self-motivated Senior OCS Engineer to work in on one of their light rail project. As the successful candidate your ideas for continuous…
Added 4 hours ago
A
Transmission Engineer
ATCO
Edmonton, AB
- Full-time
…lifecycle from engineering design through construction and commissioning, helping deliver a safe, reliable, and resilient transmission system for the communities we…
Added 4 hours ago
GA
Building Systems Engineer
GDI Ainsworth
Mississauga, ON
- $90,000 to $110,000 CAD / year
- Full-time
The Building Systems Engineer optimizes HVAC and mechanical building systems through data analytics to improve performance, sustainability, and energy efficiency.

Aluminum 3104

Automation Engineer

Belleville, ON, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: May 5, 2027
Posting language: English
Posted: Nov 6, 2026

Original job description

ABOUT ALUMINUM 3104

Our VISION is to be Canada’s most trusted beverage packaging partner. To get there, we’re building the first modern aluminum beverage can plant in Canada, and the first aluminum beverage can plant in more than 40 years. Our 200,000 sq. ft., highly automated facility in Belleville, Ontario opens in late 2027. We built it for Canadian beverage brands, and we’re partnering with the Canadian aluminum supply chain, and bringing technical and operational expertise back home to strengthen Canada’s food and beverage security.

We’ll make precision aluminum cans to the exact specifications brewers and drink makers need. We’ll earn our reputation one good can, one kept promise and one honest conversation at a time. Because our lines are highly automated, the work here is about running, maintaining and improving modern production equipment. That means skilled careers, strong Total Rewards and the chance to build deep expertise.

We’re a startup with big plans, guided by four VALUES: Safety First. Quality Obsessed. Excellence Driven. Stronger Together. Phase one will create more than 100 jobs, most of them filled by people from the communities around our plant. We’ll pair them with experienced industry experts from around the world to build a team that sets the standard and brings a fresh perspective. As a greenfield business, we get to do things differently. We have no legacy systems and no inherited bureaucracy. What we become will come from the people we hire.

Who we’re looking for. We want people who are hungry to grow, willing to spend the time in extensive training and development programs, up for a challenge and comfortable with the unknown. We hire for character, values and attitude, and we will train for skills. If you’re tired of hearing “that’s the way it’s always been done,” and you’d rather build systems than inherit someone else’s, you’ll find a rewarding career here.

POSITION OBJECTIVE & SUMMARY

The Automation & Controls Engineer will serve as the plant’s technical owner for automation and control systems, supporting the startup, commissioning, reliability, and continuous improvement of A3104’s new high-speed aluminum beverage can manufacturing facility in Canada. The role is responsible for the safe integration, validation, and optimization of plant-wide controls (including PLCs, HMIs, drives, industrial networks, instrumentation, machine controls, and vision systems) while maintaining disciplined software management, technical documentation, and workforce training.

Working cross-functionally with internal teams, OEMs, and system integrators, this position will support equipment installation, FAT/SAT, ramp-up, and acceptance before transitioning its focus to troubleshooting, controls reliability, optimization, and continuous improvement.

SAFETY

Work in compliance with the Occupational Health and Safety Act, applicable regulations, and the employer’s procedures; use or wear required protective equipment. Report hazards, defects, incidents, injuries and occupational illness concerns promptly; do not remove or make ineffective required protective devices. Complete required inspections, lockout, pre-use checks, permits, training verification or corrective actions.

HOW THIS SUBJECT MATTER EXPERT WORKS

• Safety above all. Everyone goes home daily, this is nonnegotiable. As subject matter expert in the company, always ensure all work in the business is completed in compliance with the Occupational Health and Safety Act, applicable regulations, and the company’s procedures.

• Hands-on. Works on the floor, not from an office. Goes online with the PLC, pulls the trend and puts a meter on the circuit before deciding what's wrong. Can explain why a machine kept faulting on night shift and then tell the line lead in plain terms what was fixed and what to watch.

• Owns the code. Every program in the plant has one approved master, a current backup and a revision history. No undocumented online edits, no forced I/O left in place, and no OEM closeout until everything is in hand.

• Fixes it once. Knows the difference between a reset and a root cause. Recurring faults get a permanent fix that is documented and verified. Measures success in uptime.

• Teacher. Builds controls capability in Maintenance and Electrical so the plant doesn't depend on one person or an OEM support line. Writes troubleshooting guides a technician can follow at 3 a.m., and coaches at the panel instead of taking over the laptop.

• Partner. Works shoulder to shoulder with Operations, Maintenance, Quality, IT/OT and OEMs. Holds integrators to the spec and the schedule, and raises problems early with data and a proposed fix.

• Builds standards, not complexity. Uses the greenfield window to set tag naming, alarm philosophy, HMI layouts and network architecture before bad habits form. Knows what a single site needs on day one and what can wait for the growth phase, and doesn't over-engineer.

CORE RESPONSIBILITIES

Controls & Automation

· Program, troubleshoot, modify, and maintain PLC, HMI, SCADA, VFD, servo, safety, instrumentation, vision, and industrial-network systems.

· Diagnose electrical, control, communication, sensor, drive, and equipment-integration failures.

· Optimize machine sequences, pacing, conveyors, accumulation, alarms, interlocks, and equipment handshakes.

· Validate all changes before returning equipment to production.

Production Equipment Support

Provide controls and automation support for:

· Coil handling, cuppers, bodymakers, trimmers, washers, decorators, printers, ovens, inside spray machines, neckers, and flangers.

· Vision, inspection, conveying, vacuum, palletizing, packaging, scrap-handling, utility, and plant-support systems.

· Troubleshooting & Reliability

· Serve as the escalation point for complex electrical, controls, network, and automation failures.

· Use PLC diagnostics, alarm histories, drive faults, network tools, trends, and electrical measurements to determine root cause.

· Implement permanent corrective actions for recurring or high-impact failures.

· Identify preventive maintenance opportunities and critical automation spare-parts requirements.

Electrical, Network and Change Control

· Read and interpret electrical schematics, panel drawings, I/O drawings, and technical manuals.

· Troubleshoot sensors, encoders, instrumentation, control valves, starters, drives, motors, and industrial networks.

· Support EtherNet/IP, PROFINET, Modbus TCP, OPC UA, and other installed networks.

· Maintain network records, asset inventories, software backups, revision histories, and approved master programs.

· Follow change-management, cybersecurity, remote-access, backup, and rollback requirements.

POINT-IN-TIME / SECONDARY RESPONSIBILITIES

Commissioning & Startup

· Support the installation, integration, commissioning, and startup of plant automation and production equipment.

· Review OEM electrical drawings, control narratives, I/O lists, network architecture, and safety circuits.

· Participate in FAT, SAT, power-up, I/O checkout, dry-cycle testing, production trials, qualification, and acceptance.

· Tune line controls, conveyors, accumulation, vacuum, and blow-off systems to achieve stable production flow.

· Ensure OEMs provide complete source code, passwords, licenses, backups, and documentation before closeout.

Projects and Continuous Improvement

· Deliver automation improvements supporting safety, quality, OEE, throughput, reliability, spoilage reduction, and energy efficiency.

· Develop project scopes, specifications, budgets, schedules, and performance measures.

· Review vendor designs and manage integrators and contractors through commissioning and performance testing.

· Document and verify results following implementation.

Training and Technical Development

· Train Maintenance and Electrical personnel in controls diagnostics and structured troubleshooting.

· Develop troubleshooting guides, standard work, technical documentation, and competency matrices.

· Coordinate knowledge transfer from OEMs and suppliers during commissioning and startup.

PREFERRED QUALIFICATIONS

· Bachelor’s degree in Engineering (Electrical, Automation, Controls, Mechatronics, Computer).

· 3–5 years of industrial automation or controls experience.

· Strong hands-on PLC programming and troubleshooting experience.

· Experience with HMIs, VFDs, servo systems, sensors, instrumentation, and industrial networks.

· Ability to read and interpret electrical schematics and controls documentation.

· Experience working with highly automated manufacturing equipment.

· Strong troubleshooting, analytical, and root-cause-analysis skills.

· Ability to work effectively across Engineering, Operations, Maintenance, Quality, IT/OT, and external suppliers.

· Ability to support off-shift activities during commissioning, startup, and critical production events.

ASSET QUALIFICATIONS (valued though not required)

· P.Eng. licence in good standing with PEO, or licensed in another Canadian province, or equivalent.

· Experience in high-speed continuous manufacturing.

· Aluminum beverage can manufacturing experience.

· Experience with Rockwell Automation ControlLogix / CompactLogix and/or Siemens S7 / TIA Portal.

· Greenfield manufacturing, equipment startup, or plant commissioning experience.

· Experience conducting FAT, SAT, commissioning, and equipment performance testing.

· Experience with industrial Ethernet networks, machine vision, motion control, and functional safety systems.

Apply About employer

More about this job

Responsibilities

Own and support plant-wide automation and control systems, including PLCs, HMIs, drives, instrumentation, machine controls, vision systems, and industrial networks, from commissioning through ongoing production. Troubleshoot failures, implement verified permanent improvements, maintain software and technical records, and train plant personnel in controls diagnostics.

Requirements

The posting prefers a bachelor’s degree in an engineering discipline and 3–5 years of industrial automation or controls experience. Candidates should have hands-on PLC programming and troubleshooting experience, familiarity with manufacturing controls and electrical documentation, and the ability to collaborate across teams and support commissioning or critical production events.

Skills

PLC Programming And Troubleshooting
HMI And SCADA Systems
VFD And Servo Systems
Industrial Networks
Instrumentation And Sensors
Electrical Schematics
Root Cause Analysis
Controls Reliability
Commissioning And Startup
FAT And SAT
Machine Vision
Motion Control
Functional Safety
Change Management
Technical Documentation
Cross-Functional Collaboration

Visa sponsorship

Not detected in the job text

Keywords

PLC
HMI
SCADA
Rockwell ControlLogix
CompactLogix
Siemens S7
TIA Portal
VFD
Servo Systems
EtherNet/IP
PROFINET
Modbus TCP
OPC UA
Industrial Ethernet
Machine Vision
Motion Control
Functional Safety
Instrumentation
Electrical Schematics
FAT
SAT
Commissioning
Startup
Root Cause Analysis
Change Management
Cybersecurity
OEE
High-Speed Manufacturing
Aluminum Beverage Cans
Continuous Improvement

Report this job