Find work in Canada.

619,303 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 10 mins ago
EM
Automotive Detailer
Enterprise Mobility
Timmins, ON
- $19.2 CAD / hour
- Full-time
Enterprise Mobility is seeking a responsible, dedicated person to join our team as a Full Time Automotive Detailer. This position pays $19.20 / hour and is located at 470 ALGONQUIN BLVD E…
Added 10 mins ago
EM
Automotive Detailer - Car Washer - Lindsay
Enterprise Mobility
Peterborough, ON
- $18.25 CAD / hour
- Full-time
Enterprise Mobility is seeking a responsible, dedicated person to join our team as a full time Automotive Detailer. This position pays $18.25 / hour and is located at 351 KENT STREET WEST…
Added 25 mins ago
RD
Superintendent of Utilities, Parks, and Facilities (Exempt; Permanent, Full-time)
Regional District of Fraser-Fort George
Prince George, BC
- Full-time
…Leader, Environmental Field Supervisor, Environmental Services Lead Hand, Environmental Service Worker 1s, and other operational staff assigned to utilities, parks, and facility…
Added 25 mins ago
CC
Financial Associate - MFDA
Coast Capital
Victoria, BC
- Full-time
…retention objectives and assume responsibility for portfolio maintenance and member experience in the Financial Planners absence. Uncovering and referring complex investment needs, personal…
Added 40 mins ago
NA
Security & Technology Services Manager
New Age Group
Concord, ON
- Full-time
This role leads the Security & Integration Support Team and serves as the highest escalation point for all customer-facing technology platforms. The Security & Technology Services Manager…
Added 40 mins ago
NA
Level 1 Security Systems Technician
New Age Group
Concord, ON
- Full-time
The Level I Technician is responsible for the installation, maintenance, testing, and servicing of security, surveillance, structured cabling, and access control systems under established…
Added 40 mins ago
NA
Apprentice Security Systems Technician
New Age Group
Concord, ON
- $22 CAD / hour
- Full-time
This position provides a clearly defined training path leading to Labourer, Technician I, Technician II, Senior Technician, and Lead Technician positions.
Added 40 mins ago
NA
Labourer
New Age Group
Concord, ON
- $28 CAD / hour
- Full-time
The Labourer is a key member of our Field Operations team and serves as the foundation of our technician development program. Working alongside experienced technicians, Labourers support…
Added 40 mins ago
NA
Experienced Security Systems Integration Technician
New Age Group
Concord, ON
- $85,000 to $100,000 CAD / year
- Full-time
We are seeking a Experienced Security Systems Integration Technician to join our growing technical team. This role requires expert-level knowledge of intrusion alarm systems, access…
Added 53 mins ago
SD
Pharmacy Manager, Hourly Full Time Flexible Shifts
Shoppers Drug Mart
Mission, BC
- Full-time
…great place to work. We’re committed to building our talented team who champion collaboration, kindness and inclusivity. Join our team, and help recognize a healthy future for your career…
Added 1 hour ago
EM
Automotive Detailer - Car Washer - Toronto
Enterprise Mobility
Toronto, ON
- $18.25 CAD / hour
- Full-time
Enterprise Mobility is seeking a responsible, dedicated person to join our team as a full time Automotive Detailer. This position pays $18.25 / hour and is located at 865 YORK MILLS RD UNIT…
Added 1 hour ago
EM
Automotive Detailer - Car Washer - Toronto
Enterprise Mobility
Toronto, ON
- $18.25 CAD / hour
- Full-time
Enterprise Mobility is seeking a responsible, dedicated person to join our team as a full time Automotive Detailer. This position pays $18.25 / hour and is located at 121 LAIRD DR EAST…
Added 1 hour ago
C
Operations Management Associate - Food Manufacturing
Cargill
London, ON
- Full-time
…feed. This position is a training role that will prepare you to lead diverse teams as a plant Operations Supervisor following this 6-12 month training program. During this time, you will…
Added 1 hour ago
C-
Commercial HVAC Service Technician
Captiveaire - Region 114 Western PA
Rivière-Saint-Jean, QC
- Full-time
Customer Care: Communicate clearly and professionally with facility managers, property owners, and team members regarding system status, required repairs, and maintenance recommendations.
Added 1 hour ago
C-
Commercial HVAC Service Technician
Captiveaire - Region 114 Western PA
PE · Prince, PE
- Full-time
Customer Care: Communicate clearly and professionally with facility managers, property owners, and team members regarding system status, required repairs, and maintenance recommendations.
Added 1 hour ago
XT
Operations Support
XTL Transport, Logistics, Distribution
Vaudreuil-Dorion, QC
- Full-time
This role is ideal for someone eager to grow, learn, and lead. We believe in fostering a workplace where people from all walks of life feel seen, supported, and inspired to bring their best…
Added 1 hour ago
P
Mechanical Assembler - Day Shift
Powell
Acheson, AB
- Full-time
Ability to follow direction from Senior Assemblers and Lead Assemblers.
Added 2 hours ago
E
Dietary Aide -Part Time
Extendicare
Brantford, ON · LTC - Brierwood Gardens
- Part-time
Lead with H.E.A.R.T. (hear, empathize, acknowledge, respond, thank)
Added 2 hours ago
Parts Manager (Heavy Duty)
Velocity Vehicle Group
Surrey, BC
Lead, mentor, and support a high-performing parts team
Added 2 hours ago
Account Manager_Operations_Cleaning_Industry_London
United Services Group
London, ON · St. Thomas, ON · Woodstock, ON
We are an established Canadian facility, maintenance company. We provide a variety of services to large retail and commercial businesses nationally.
Added 2 hours ago
BE
Mechanic - Shop Foreman
Battlefield Equipment Rentals
Timmins, ON
- Full-time
At Battlefield Equipment Rentals, we don’t just rent out top-tier construction equipment, we empower our team to grow, thrive, and make a real impact in local communities every day. As part…
Added 2 hours ago
BE
Mechanic - Shop Lead
Battlefield Equipment Rentals
Sudbury, ON
- Full-time
If you’re a skilled Heavy Equipment Mechanic who thrives in a fast-paced, team-oriented environment and takes pride in quality workmanship and mentoring junior mechanics, we want to hear…
Added 2 hours ago
Advisor, Procurement Planning
Regional Municipality of Wood Buffalo
Fort McMurray, AB
Assist with the development of the annual procurement plan and lead the quarterly forecasting process with internal departments.
Added 2 hours ago
CC
Transportation Specialist
Canadian Cancer Society
Toronto, ON
- Part-time
…external stakeholders. This position will work as part of a team supporting staff and volunteers based in multiple locations across the country and will have the primary responsibility of…
Added 2 hours ago
VA
Veterinary Reception, Animal Care Attendant, Secord Animal Hospital
VCA Animal Hospitals
Toronto, ON
- Full-time
At Secord Animal Hospital, we welcome a Veterinary Reception/Animal Care Attendant to join our team full-time in Toronto, Ontario. This is an exciting opportunity for an organized,…

Aluminum 3104

Automation Engineer

Belleville, ON, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: May 5, 2027
Posting language: English
Posted: Nov 6, 2026

Original job description

ABOUT ALUMINUM 3104

Our VISION is to be Canada’s most trusted beverage packaging partner. To get there, we’re building the first modern aluminum beverage can plant in Canada, and the first aluminum beverage can plant in more than 40 years. Our 200,000 sq. ft., highly automated facility in Belleville, Ontario opens in late 2027. We built it for Canadian beverage brands, and we’re partnering with the Canadian aluminum supply chain, and bringing technical and operational expertise back home to strengthen Canada’s food and beverage security.

We’ll make precision aluminum cans to the exact specifications brewers and drink makers need. We’ll earn our reputation one good can, one kept promise and one honest conversation at a time. Because our lines are highly automated, the work here is about running, maintaining and improving modern production equipment. That means skilled careers, strong Total Rewards and the chance to build deep expertise.

We’re a startup with big plans, guided by four VALUES: Safety First. Quality Obsessed. Excellence Driven. Stronger Together. Phase one will create more than 100 jobs, most of them filled by people from the communities around our plant. We’ll pair them with experienced industry experts from around the world to build a team that sets the standard and brings a fresh perspective. As a greenfield business, we get to do things differently. We have no legacy systems and no inherited bureaucracy. What we become will come from the people we hire.

Who we’re looking for. We want people who are hungry to grow, willing to spend the time in extensive training and development programs, up for a challenge and comfortable with the unknown. We hire for character, values and attitude, and we will train for skills. If you’re tired of hearing “that’s the way it’s always been done,” and you’d rather build systems than inherit someone else’s, you’ll find a rewarding career here.

POSITION OBJECTIVE & SUMMARY

The Automation & Controls Engineer will serve as the plant’s technical owner for automation and control systems, supporting the startup, commissioning, reliability, and continuous improvement of A3104’s new high-speed aluminum beverage can manufacturing facility in Canada. The role is responsible for the safe integration, validation, and optimization of plant-wide controls (including PLCs, HMIs, drives, industrial networks, instrumentation, machine controls, and vision systems) while maintaining disciplined software management, technical documentation, and workforce training.

Working cross-functionally with internal teams, OEMs, and system integrators, this position will support equipment installation, FAT/SAT, ramp-up, and acceptance before transitioning its focus to troubleshooting, controls reliability, optimization, and continuous improvement.

SAFETY

Work in compliance with the Occupational Health and Safety Act, applicable regulations, and the employer’s procedures; use or wear required protective equipment. Report hazards, defects, incidents, injuries and occupational illness concerns promptly; do not remove or make ineffective required protective devices. Complete required inspections, lockout, pre-use checks, permits, training verification or corrective actions.

HOW THIS SUBJECT MATTER EXPERT WORKS

• Safety above all. Everyone goes home daily, this is nonnegotiable. As subject matter expert in the company, always ensure all work in the business is completed in compliance with the Occupational Health and Safety Act, applicable regulations, and the company’s procedures.

• Hands-on. Works on the floor, not from an office. Goes online with the PLC, pulls the trend and puts a meter on the circuit before deciding what's wrong. Can explain why a machine kept faulting on night shift and then tell the line lead in plain terms what was fixed and what to watch.

• Owns the code. Every program in the plant has one approved master, a current backup and a revision history. No undocumented online edits, no forced I/O left in place, and no OEM closeout until everything is in hand.

• Fixes it once. Knows the difference between a reset and a root cause. Recurring faults get a permanent fix that is documented and verified. Measures success in uptime.

• Teacher. Builds controls capability in Maintenance and Electrical so the plant doesn't depend on one person or an OEM support line. Writes troubleshooting guides a technician can follow at 3 a.m., and coaches at the panel instead of taking over the laptop.

• Partner. Works shoulder to shoulder with Operations, Maintenance, Quality, IT/OT and OEMs. Holds integrators to the spec and the schedule, and raises problems early with data and a proposed fix.

• Builds standards, not complexity. Uses the greenfield window to set tag naming, alarm philosophy, HMI layouts and network architecture before bad habits form. Knows what a single site needs on day one and what can wait for the growth phase, and doesn't over-engineer.

CORE RESPONSIBILITIES

Controls & Automation

· Program, troubleshoot, modify, and maintain PLC, HMI, SCADA, VFD, servo, safety, instrumentation, vision, and industrial-network systems.

· Diagnose electrical, control, communication, sensor, drive, and equipment-integration failures.

· Optimize machine sequences, pacing, conveyors, accumulation, alarms, interlocks, and equipment handshakes.

· Validate all changes before returning equipment to production.

Production Equipment Support

Provide controls and automation support for:

· Coil handling, cuppers, bodymakers, trimmers, washers, decorators, printers, ovens, inside spray machines, neckers, and flangers.

· Vision, inspection, conveying, vacuum, palletizing, packaging, scrap-handling, utility, and plant-support systems.

· Troubleshooting & Reliability

· Serve as the escalation point for complex electrical, controls, network, and automation failures.

· Use PLC diagnostics, alarm histories, drive faults, network tools, trends, and electrical measurements to determine root cause.

· Implement permanent corrective actions for recurring or high-impact failures.

· Identify preventive maintenance opportunities and critical automation spare-parts requirements.

Electrical, Network and Change Control

· Read and interpret electrical schematics, panel drawings, I/O drawings, and technical manuals.

· Troubleshoot sensors, encoders, instrumentation, control valves, starters, drives, motors, and industrial networks.

· Support EtherNet/IP, PROFINET, Modbus TCP, OPC UA, and other installed networks.

· Maintain network records, asset inventories, software backups, revision histories, and approved master programs.

· Follow change-management, cybersecurity, remote-access, backup, and rollback requirements.

POINT-IN-TIME / SECONDARY RESPONSIBILITIES

Commissioning & Startup

· Support the installation, integration, commissioning, and startup of plant automation and production equipment.

· Review OEM electrical drawings, control narratives, I/O lists, network architecture, and safety circuits.

· Participate in FAT, SAT, power-up, I/O checkout, dry-cycle testing, production trials, qualification, and acceptance.

· Tune line controls, conveyors, accumulation, vacuum, and blow-off systems to achieve stable production flow.

· Ensure OEMs provide complete source code, passwords, licenses, backups, and documentation before closeout.

Projects and Continuous Improvement

· Deliver automation improvements supporting safety, quality, OEE, throughput, reliability, spoilage reduction, and energy efficiency.

· Develop project scopes, specifications, budgets, schedules, and performance measures.

· Review vendor designs and manage integrators and contractors through commissioning and performance testing.

· Document and verify results following implementation.

Training and Technical Development

· Train Maintenance and Electrical personnel in controls diagnostics and structured troubleshooting.

· Develop troubleshooting guides, standard work, technical documentation, and competency matrices.

· Coordinate knowledge transfer from OEMs and suppliers during commissioning and startup.

PREFERRED QUALIFICATIONS

· Bachelor’s degree in Engineering (Electrical, Automation, Controls, Mechatronics, Computer).

· 3–5 years of industrial automation or controls experience.

· Strong hands-on PLC programming and troubleshooting experience.

· Experience with HMIs, VFDs, servo systems, sensors, instrumentation, and industrial networks.

· Ability to read and interpret electrical schematics and controls documentation.

· Experience working with highly automated manufacturing equipment.

· Strong troubleshooting, analytical, and root-cause-analysis skills.

· Ability to work effectively across Engineering, Operations, Maintenance, Quality, IT/OT, and external suppliers.

· Ability to support off-shift activities during commissioning, startup, and critical production events.

ASSET QUALIFICATIONS (valued though not required)

· P.Eng. licence in good standing with PEO, or licensed in another Canadian province, or equivalent.

· Experience in high-speed continuous manufacturing.

· Aluminum beverage can manufacturing experience.

· Experience with Rockwell Automation ControlLogix / CompactLogix and/or Siemens S7 / TIA Portal.

· Greenfield manufacturing, equipment startup, or plant commissioning experience.

· Experience conducting FAT, SAT, commissioning, and equipment performance testing.

· Experience with industrial Ethernet networks, machine vision, motion control, and functional safety systems.

Apply About employer

More about this job

Responsibilities

Own and support plant-wide automation and control systems, including PLCs, HMIs, drives, instrumentation, machine controls, vision systems, and industrial networks, from commissioning through ongoing production. Troubleshoot failures, implement verified permanent improvements, maintain software and technical records, and train plant personnel in controls diagnostics.

Requirements

The posting prefers a bachelor’s degree in an engineering discipline and 3–5 years of industrial automation or controls experience. Candidates should have hands-on PLC programming and troubleshooting experience, familiarity with manufacturing controls and electrical documentation, and the ability to collaborate across teams and support commissioning or critical production events.

Skills

PLC Programming And Troubleshooting
HMI And SCADA Systems
VFD And Servo Systems
Industrial Networks
Instrumentation And Sensors
Electrical Schematics
Root Cause Analysis
Controls Reliability
Commissioning And Startup
FAT And SAT
Machine Vision
Motion Control
Functional Safety
Change Management
Technical Documentation
Cross-Functional Collaboration

Visa sponsorship

Not detected in the job text

Keywords

PLC
HMI
SCADA
Rockwell ControlLogix
CompactLogix
Siemens S7
TIA Portal
VFD
Servo Systems
EtherNet/IP
PROFINET
Modbus TCP
OPC UA
Industrial Ethernet
Machine Vision
Motion Control
Functional Safety
Instrumentation
Electrical Schematics
FAT
SAT
Commissioning
Startup
Root Cause Analysis
Change Management
Cybersecurity
OEE
High-Speed Manufacturing
Aluminum Beverage Cans
Continuous Improvement

Report this job