Find work in Canada.

614,623 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 5 mins ago
TC
Health and Safety Coordinator
Toromont Cat
Concord, ON
- Full-time
Coordinate workplace testing appointments and confidentially distribute results to the appropriate Human Resources Business Partner.
Added 5 mins ago
RB
Full Stack Engineer
Royal Bank of Canada
Vancouver, BC
- Full-time
Work with IT leadership, business stakeholders, contractors, and partner teams to deliver solutions
Added 5 mins ago
RB
Director, Strategy
Royal Bank of Canada
Toronto, ON
- Full-time
Partner with Technology, Procurement, and third-party vendors to execute strategic initiatives
Added 5 mins ago
AC
Senior Financial Analyst
Aston Carter
AB · Edmonton, Alberta
- $40 to $45 CAD / hour
- Contract
…economics, cost recovery, and margin performance. You will partner closely with service and operations leaders to analyze how technician labour, overtime, and related costs are built into…
Added 5 mins ago
T
Channel Analytics Specialist
TEKsystems
Mississauga, ON
- $45 to $50 CAD / hour
- Contract
Partner with cross-functional teams including brand, loyalty, and marketing to support ongoing initiatives
Added 5 mins ago
T
Carrier Planner
TEKsystems
Mississauga, ON
- $26.5 CAD / hour
- Contract
Added 5 mins ago
T
Everyday Banking Representative
TEKsystems
Vancouver, BC
- $24 to $25 CAD / hour
- Contract
…the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. Were strategic thinkers, hands-on collaborators, helping…
Added 5 mins ago
W
(CAN) Digital Fulfillment Team Lead
Walmart
Williams Lake, BC
- Full-time
10. Partner with Coach/People Lead to facilitate performance management and growth conversations for Associates. Supports recruiting and hiring new associates.
Added 5 mins ago
P
EHS Specialist
PPG
Cambridge, ON
- Full-time
Partner with environmental Center of Excellence for environmental aspects.
Added 5 mins ago
W
Senior Software Engineer II - Platform & Enablement
Wrapbook
Remote, Canada
- $183,000 to $251,500 CAD / year
- Full-time
- Remote
…inside and outside the team and function; serve as a trusted partner with business stakeholders and cross-functional…
Added 5 mins ago
SH
Document Management & QA Support Coordinator
Sotera Health
Ottawa, ON
- Full-time
…employees who are dedicated to safety and quality. We are a trusted partner to more than 5,800 customers in over 50 countries, including more than 40 of the top 50 medical device companies…
Added 5 mins ago
Data Developer
Aylo Careers
Montreal, QC
Partner with engineering, infrastructure, and security teams to define metrics, standardize definitions, and improve data accessibility
Added 5 mins ago
W
Human Resources Coordinator - Manufacturing (Open to New Graduates) - Onsite
Wonderbrands
Toronto, ON · Greater Toronto Area, ON
- Other
Partner with leadership to drive strategic growth within the Talent and Development team
Added 5 mins ago
TH
Human Resources Staffing Coordinator Full Time (BARRIE)
The Home Depot
Barrie, ON
- Full-time
Ensuring associate availabilities meet minimum requirements as per business needs and partner with Department Supervisor/Assistant Store Manager (DS/ASM) should they not
Added 5 mins ago
AT
Mechanic
Arrow Transportation Systems Inc.
Kamloops, BC
- Full-time
Arrow has been recognized as a Top Fleet Employer of Distinction, a SmartWay Transport Partner, a BCTA Clean Carrier, a BC Hydro Clean Energy Champion and as a Carrier of Excellence in…
Added 5 mins ago
IF
Distribution Support Specialist
iA Financial Group
Calgary, AB
- Full-time
Partner with Account Executives and distribution leaders to enhance the advisor experience, support advisor retention efforts, and contribute to a responsive and consistent distribution…
Added 5 mins ago
AB
Senior Expert ARM Kernel Developer – RICOCHET - Central Technology
Activision Blizzard
Vancouver, BC
- Other
Collaborate Across Studios and Platforms: Partner with security engineers, platform teams, and external partners to validate hardware compatibility, improve development and testing…
Added 5 mins ago
Sales Account Manager, CPG - Amazon Ads
Amazon
Toronto, ON
…advertising, offering a rich array of advertising solutions. We partner with advertisers to reach Amazon customers on Amazon.ca, across our other owned and operated sites, on other high…
Added 5 mins ago
UO
Industry Engagement Coordinator
University of Waterloo
Waterloo, ON · William M. Tatham Centre
- Full-time
· Partner with other Waterloo departments (e.g., Office of Advancement, Office of Research, Alumni Relations, Faculties, Centers and Institutes, School of Planning, etc.) to collaborate and…
Added 5 mins ago
SB
Packaging Supervisor
Sleeman Breweries Ltd.
Vernon, BC
- Full-time
Identify training needs and partner with HR and leadership to deliver effective development plans.
Added 20 mins ago
R
Financial Advisor
RBC
Burnaby, BC
- Full-time
Use your own advice capabilities, an those of the right partner in the RBC ecosystem to meet our clients entire suite of financial needs, both personal and business
Added 20 mins ago
R
Director, Strategy
RBC
Toronto, ON
- Full-time
Partner with Technology, Procurement, and third-party vendors to execute strategic initiatives
Added 20 mins ago
P
Plant Director
Prysmian
Saint-Jérôme, QC · St Jerome
- Full-time
Partner with commercial and product teams to align manufacturing capabilities with evolving customer and market demands.
Added 20 mins ago
PR
Senior Manager, Replenishment Planning
Pernod Ricard
Windsor, ON
- Full-time
Partner with Manufacturing, Co-packing, Procurement, Demand Planning, Logistics, Customer Service, Finance, Sales, Marketing, and Quality.
Added 20 mins ago
PV
Keyholder
Pet Valu
Ottawa, ON
- Part-time
All of our stores are dedicated to helping local pets in need, and we partner with local shelters, rescues and charities for adoption events, in-store adoption (select stores only) and pet…

Aluminum 3104

Automation Engineer

Belleville, ON, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: May 5, 2027
Posting language: English
Posted: Nov 6, 2026

Original job description

ABOUT ALUMINUM 3104

Our VISION is to be Canada’s most trusted beverage packaging partner. To get there, we’re building the first modern aluminum beverage can plant in Canada, and the first aluminum beverage can plant in more than 40 years. Our 200,000 sq. ft., highly automated facility in Belleville, Ontario opens in late 2027. We built it for Canadian beverage brands, and we’re partnering with the Canadian aluminum supply chain, and bringing technical and operational expertise back home to strengthen Canada’s food and beverage security.

We’ll make precision aluminum cans to the exact specifications brewers and drink makers need. We’ll earn our reputation one good can, one kept promise and one honest conversation at a time. Because our lines are highly automated, the work here is about running, maintaining and improving modern production equipment. That means skilled careers, strong Total Rewards and the chance to build deep expertise.

We’re a startup with big plans, guided by four VALUES: Safety First. Quality Obsessed. Excellence Driven. Stronger Together. Phase one will create more than 100 jobs, most of them filled by people from the communities around our plant. We’ll pair them with experienced industry experts from around the world to build a team that sets the standard and brings a fresh perspective. As a greenfield business, we get to do things differently. We have no legacy systems and no inherited bureaucracy. What we become will come from the people we hire.

Who we’re looking for. We want people who are hungry to grow, willing to spend the time in extensive training and development programs, up for a challenge and comfortable with the unknown. We hire for character, values and attitude, and we will train for skills. If you’re tired of hearing “that’s the way it’s always been done,” and you’d rather build systems than inherit someone else’s, you’ll find a rewarding career here.

POSITION OBJECTIVE & SUMMARY

The Automation & Controls Engineer will serve as the plant’s technical owner for automation and control systems, supporting the startup, commissioning, reliability, and continuous improvement of A3104’s new high-speed aluminum beverage can manufacturing facility in Canada. The role is responsible for the safe integration, validation, and optimization of plant-wide controls (including PLCs, HMIs, drives, industrial networks, instrumentation, machine controls, and vision systems) while maintaining disciplined software management, technical documentation, and workforce training.

Working cross-functionally with internal teams, OEMs, and system integrators, this position will support equipment installation, FAT/SAT, ramp-up, and acceptance before transitioning its focus to troubleshooting, controls reliability, optimization, and continuous improvement.

SAFETY

Work in compliance with the Occupational Health and Safety Act, applicable regulations, and the employer’s procedures; use or wear required protective equipment. Report hazards, defects, incidents, injuries and occupational illness concerns promptly; do not remove or make ineffective required protective devices. Complete required inspections, lockout, pre-use checks, permits, training verification or corrective actions.

HOW THIS SUBJECT MATTER EXPERT WORKS

• Safety above all. Everyone goes home daily, this is nonnegotiable. As subject matter expert in the company, always ensure all work in the business is completed in compliance with the Occupational Health and Safety Act, applicable regulations, and the company’s procedures.

• Hands-on. Works on the floor, not from an office. Goes online with the PLC, pulls the trend and puts a meter on the circuit before deciding what's wrong. Can explain why a machine kept faulting on night shift and then tell the line lead in plain terms what was fixed and what to watch.

• Owns the code. Every program in the plant has one approved master, a current backup and a revision history. No undocumented online edits, no forced I/O left in place, and no OEM closeout until everything is in hand.

• Fixes it once. Knows the difference between a reset and a root cause. Recurring faults get a permanent fix that is documented and verified. Measures success in uptime.

• Teacher. Builds controls capability in Maintenance and Electrical so the plant doesn't depend on one person or an OEM support line. Writes troubleshooting guides a technician can follow at 3 a.m., and coaches at the panel instead of taking over the laptop.

• Partner. Works shoulder to shoulder with Operations, Maintenance, Quality, IT/OT and OEMs. Holds integrators to the spec and the schedule, and raises problems early with data and a proposed fix.

• Builds standards, not complexity. Uses the greenfield window to set tag naming, alarm philosophy, HMI layouts and network architecture before bad habits form. Knows what a single site needs on day one and what can wait for the growth phase, and doesn't over-engineer.

CORE RESPONSIBILITIES

Controls & Automation

· Program, troubleshoot, modify, and maintain PLC, HMI, SCADA, VFD, servo, safety, instrumentation, vision, and industrial-network systems.

· Diagnose electrical, control, communication, sensor, drive, and equipment-integration failures.

· Optimize machine sequences, pacing, conveyors, accumulation, alarms, interlocks, and equipment handshakes.

· Validate all changes before returning equipment to production.

Production Equipment Support

Provide controls and automation support for:

· Coil handling, cuppers, bodymakers, trimmers, washers, decorators, printers, ovens, inside spray machines, neckers, and flangers.

· Vision, inspection, conveying, vacuum, palletizing, packaging, scrap-handling, utility, and plant-support systems.

· Troubleshooting & Reliability

· Serve as the escalation point for complex electrical, controls, network, and automation failures.

· Use PLC diagnostics, alarm histories, drive faults, network tools, trends, and electrical measurements to determine root cause.

· Implement permanent corrective actions for recurring or high-impact failures.

· Identify preventive maintenance opportunities and critical automation spare-parts requirements.

Electrical, Network and Change Control

· Read and interpret electrical schematics, panel drawings, I/O drawings, and technical manuals.

· Troubleshoot sensors, encoders, instrumentation, control valves, starters, drives, motors, and industrial networks.

· Support EtherNet/IP, PROFINET, Modbus TCP, OPC UA, and other installed networks.

· Maintain network records, asset inventories, software backups, revision histories, and approved master programs.

· Follow change-management, cybersecurity, remote-access, backup, and rollback requirements.

POINT-IN-TIME / SECONDARY RESPONSIBILITIES

Commissioning & Startup

· Support the installation, integration, commissioning, and startup of plant automation and production equipment.

· Review OEM electrical drawings, control narratives, I/O lists, network architecture, and safety circuits.

· Participate in FAT, SAT, power-up, I/O checkout, dry-cycle testing, production trials, qualification, and acceptance.

· Tune line controls, conveyors, accumulation, vacuum, and blow-off systems to achieve stable production flow.

· Ensure OEMs provide complete source code, passwords, licenses, backups, and documentation before closeout.

Projects and Continuous Improvement

· Deliver automation improvements supporting safety, quality, OEE, throughput, reliability, spoilage reduction, and energy efficiency.

· Develop project scopes, specifications, budgets, schedules, and performance measures.

· Review vendor designs and manage integrators and contractors through commissioning and performance testing.

· Document and verify results following implementation.

Training and Technical Development

· Train Maintenance and Electrical personnel in controls diagnostics and structured troubleshooting.

· Develop troubleshooting guides, standard work, technical documentation, and competency matrices.

· Coordinate knowledge transfer from OEMs and suppliers during commissioning and startup.

PREFERRED QUALIFICATIONS

· Bachelor’s degree in Engineering (Electrical, Automation, Controls, Mechatronics, Computer).

· 3–5 years of industrial automation or controls experience.

· Strong hands-on PLC programming and troubleshooting experience.

· Experience with HMIs, VFDs, servo systems, sensors, instrumentation, and industrial networks.

· Ability to read and interpret electrical schematics and controls documentation.

· Experience working with highly automated manufacturing equipment.

· Strong troubleshooting, analytical, and root-cause-analysis skills.

· Ability to work effectively across Engineering, Operations, Maintenance, Quality, IT/OT, and external suppliers.

· Ability to support off-shift activities during commissioning, startup, and critical production events.

ASSET QUALIFICATIONS (valued though not required)

· P.Eng. licence in good standing with PEO, or licensed in another Canadian province, or equivalent.

· Experience in high-speed continuous manufacturing.

· Aluminum beverage can manufacturing experience.

· Experience with Rockwell Automation ControlLogix / CompactLogix and/or Siemens S7 / TIA Portal.

· Greenfield manufacturing, equipment startup, or plant commissioning experience.

· Experience conducting FAT, SAT, commissioning, and equipment performance testing.

· Experience with industrial Ethernet networks, machine vision, motion control, and functional safety systems.

Apply About employer

More about this job

Responsibilities

Own and support plant-wide automation and control systems, including PLCs, HMIs, drives, instrumentation, machine controls, vision systems, and industrial networks, from commissioning through ongoing production. Troubleshoot failures, implement verified permanent improvements, maintain software and technical records, and train plant personnel in controls diagnostics.

Requirements

The posting prefers a bachelor’s degree in an engineering discipline and 3–5 years of industrial automation or controls experience. Candidates should have hands-on PLC programming and troubleshooting experience, familiarity with manufacturing controls and electrical documentation, and the ability to collaborate across teams and support commissioning or critical production events.

Skills

PLC Programming And Troubleshooting
HMI And SCADA Systems
VFD And Servo Systems
Industrial Networks
Instrumentation And Sensors
Electrical Schematics
Root Cause Analysis
Controls Reliability
Commissioning And Startup
FAT And SAT
Machine Vision
Motion Control
Functional Safety
Change Management
Technical Documentation
Cross-Functional Collaboration

Visa sponsorship

Not detected in the job text

Keywords

PLC
HMI
SCADA
Rockwell ControlLogix
CompactLogix
Siemens S7
TIA Portal
VFD
Servo Systems
EtherNet/IP
PROFINET
Modbus TCP
OPC UA
Industrial Ethernet
Machine Vision
Motion Control
Functional Safety
Instrumentation
Electrical Schematics
FAT
SAT
Commissioning
Startup
Root Cause Analysis
Change Management
Cybersecurity
OEE
High-Speed Manufacturing
Aluminum Beverage Cans
Continuous Improvement

Report this job