Find work in Canada.

614,623 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 4 mins ago
S
Technical Services Director
SYSTRA
Toronto, ON
- Full-time
· Lead systems safety assurance initiatives to ensure that all rail infrastructure and operations meet regulatory, safety, and compliance requirements.
Added 4 mins ago
T
Carrier Planner
TEKsystems
Mississauga, ON
- $26.5 CAD / hour
- Contract
Utilize transportation management systems to tender work assignments and update shipment activities across Canada.
Added 4 mins ago
VE
Spécialiste mise en route / Commissioning Specialist
Veolia Environnement SA
Montreal, QC
- Full-time
…troubleshooting of drinking water, wastewater and process water treatment systems in municipal, industrial and mining…
Added 4 mins ago
P
EHS Specialist
PPG
Cambridge, ON
- Full-time
Develop programs to reduce EHS risks and to comply with regulatory and PPG corporate requirements and management systems.
Added 4 mins ago
W
Senior Software Engineer II - Platform & Enablement
Wrapbook
Remote, Canada
- $183,000 to $251,500 CAD / year
- Full-time
- Remote
Lead and participate in technical interviews for IC and lead engineering positions
Added 19 mins ago
P
Plant Director
Prysmian
Saint-Jérôme, QC · St Jerome
- Full-time
Prysmian Group is the global leader in energy and telecom cable systems. Every year, we manufacture thousands of miles of underground and submarine cables for power transmission and…
Added 19 mins ago
PR
Senior Analyst, Replenishment Planning (Import)
Pernod Ricard
Windsor, ON
- Full-time
Independently develop short- and mid-term replenishment plans using demand, inventory, open orders, lead times, production availability, and inventory policies.
Added 19 mins ago
PR
Analyst, Replenishment Planning
Pernod Ricard
Windsor, ON
- Full-time
Prepare and validate demand, inventory, open-order, lead-time, production, and planning data used in monthly Net Requirements.
Added 19 mins ago
PR
Senior Manager, Replenishment Planning
Pernod Ricard
Windsor, ON
- Full-time
Own domestic Net Requirements and ensure alignment among demand, inventory, production plans, capacity, lead times, sourcing rules, and financial priorities.
Added 19 mins ago
Technology Project Manager
Vacances Air Canada Vacations / Air Canada Rouge
Mississauga, ON · Montreal, QC
…sophisticated risk management capabilities, and the ability to lead diverse teams through ambiguity and rapid…
Added 19 mins ago
MS
Senior QA Automation Engineer
Motorola Solutions
Vancouver, BC
- Full-time
Defect Management: Lead the bug life cycle by providing deep-dive technical analysis, logs, and reproducible steps for engineering teams.
Added 19 mins ago
MS
System Development Engineer II
Motorola Solutions
Vancouver, BC
- Full-time
As a System Development Engineer II, you sit at the high-velocity intersection of Software Engineering and Systems Architecture, building the sophisticated tooling that allows our systems…
Added 19 mins ago
SL
Director, AI Engineering
Sun Life
Toronto, ON · Waterloo, ON · Sun Life Toronto One York
- Full-time
The Director of AI Engineering, Corporate IT leads the engineering of artificial intelligence for internal enterprise delivery, from strategy and architecture through production delivery.…
Added 19 mins ago
Product Specialist - CRM
PBS Systems
Calgary, AB
Reports To: Team Lead - Products and Solutions
Added 19 mins ago
B
Senior Manufacturing Engineer - Consumables Manufacturing
Bio-Techne
Toronto, ON · CA - Ontario - Toronto
- Full-time
Work both independently and lead cross-functional teams to continually improve manufacturing processes and execute New Product Introductions (NPI) that achieve growth and scale-up targets…
Added 19 mins ago
CE
Mechanical Technician
Cenovus Energy
NL · SeaRose FPSO - Offshore
- Full-time
Perform fault finding, diagnostics, and corrective maintenance on plant equipment and systems to prevent downtime and support reliable oil and gas production.
Added 19 mins ago
Project Coordinator
Shawnigan Lake School
Shawnigan Lake, BC
…long-term operational support. The successful candidate will lead the consolidation and standardization of key operational documentation, establishing robust, accessible management systems…
Added 20 mins ago
A3
Automation Engineer
Aluminum 3104
Belleville, ON
- Full-time
…business, we get to do things differently. We have no legacy systems and no inherited bureaucracy. What we become will come from the people we…
Added 20 mins ago
AW
Energy Manager, Utilities & Sustainability
Agilus Work Solutions
Windsor, ON
- Contract
Lead ISO 50001 implementation, Net Zero initiatives, and utility optimization for one of North America's most advanced manufacturing facilities
Added 20 mins ago
MA
Senior Electrical Engineer
Manpower Alberta
AB · Edmonton, AB
- Contract
Lead the review of EPC contractor's engineering and design packages (IFR and IFC) for accuracy, completeness, and compliance with applicable codes (NEC, NESC, IEEE, NFPA, etc.) Provide…
Added 20 mins ago
AG
Project Manager (Data Centers)
Aecon Group Inc.
AB · Greater Edmonton Metropolitan Area
- Full-time
Lead constructability reviews, sequencing planning, shutdown coordination, and turnover readiness activities. Ensure successful completion of integrated systems testing, commissioning,…
Added 20 mins ago
IC
Mechanical, Lead Hand- EN
IAMGOLD Corporation
Gogama, ON
- Full-time
We are seeking a skilled and motivated Lead Hand, Mechanical to provide frontline leadership and technical expertise within the Mill Maintenance team. Reporting to the Mechanical…
Added 20 mins ago
SC
Utilities Engineer (Senior) - ALTO Project / Cadence
SYSTRA Canada
Montreal, QC
- Full-time
Lead the design and technical review of municipal water distribution, sanitary sewer, and stormwater systems, including extensions, connections, relocations, and upgrades.
Added 20 mins ago
TP
Microbiology Specialist (Environmental Monitoring & Sampling) - 24 month contract
Teva Pharmaceuticals
Toronto, ON
- Full-time
…collaborate cross-functionally with Quality, Manufacturing, Engineering, Validation, and EHS teams while contributing to the production of high-quality pharmaceutical…
Added 20 mins ago
MM
Continuous Improvement Associate
Modine Manufacturing Company
Calgary, AB
- Full-time
At Modine, we are engineering a cleaner, healthier world. Building on more than 100 years of excellence in thermal management, we provide trusted systems and solutions that improve air…

Aluminum 3104

Automation Engineer

Belleville, ON, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: May 5, 2027
Posting language: English
Posted: Nov 6, 2026

Original job description

ABOUT ALUMINUM 3104

Our VISION is to be Canada’s most trusted beverage packaging partner. To get there, we’re building the first modern aluminum beverage can plant in Canada, and the first aluminum beverage can plant in more than 40 years. Our 200,000 sq. ft., highly automated facility in Belleville, Ontario opens in late 2027. We built it for Canadian beverage brands, and we’re partnering with the Canadian aluminum supply chain, and bringing technical and operational expertise back home to strengthen Canada’s food and beverage security.

We’ll make precision aluminum cans to the exact specifications brewers and drink makers need. We’ll earn our reputation one good can, one kept promise and one honest conversation at a time. Because our lines are highly automated, the work here is about running, maintaining and improving modern production equipment. That means skilled careers, strong Total Rewards and the chance to build deep expertise.

We’re a startup with big plans, guided by four VALUES: Safety First. Quality Obsessed. Excellence Driven. Stronger Together. Phase one will create more than 100 jobs, most of them filled by people from the communities around our plant. We’ll pair them with experienced industry experts from around the world to build a team that sets the standard and brings a fresh perspective. As a greenfield business, we get to do things differently. We have no legacy systems and no inherited bureaucracy. What we become will come from the people we hire.

Who we’re looking for. We want people who are hungry to grow, willing to spend the time in extensive training and development programs, up for a challenge and comfortable with the unknown. We hire for character, values and attitude, and we will train for skills. If you’re tired of hearing “that’s the way it’s always been done,” and you’d rather build systems than inherit someone else’s, you’ll find a rewarding career here.

POSITION OBJECTIVE & SUMMARY

The Automation & Controls Engineer will serve as the plant’s technical owner for automation and control systems, supporting the startup, commissioning, reliability, and continuous improvement of A3104’s new high-speed aluminum beverage can manufacturing facility in Canada. The role is responsible for the safe integration, validation, and optimization of plant-wide controls (including PLCs, HMIs, drives, industrial networks, instrumentation, machine controls, and vision systems) while maintaining disciplined software management, technical documentation, and workforce training.

Working cross-functionally with internal teams, OEMs, and system integrators, this position will support equipment installation, FAT/SAT, ramp-up, and acceptance before transitioning its focus to troubleshooting, controls reliability, optimization, and continuous improvement.

SAFETY

Work in compliance with the Occupational Health and Safety Act, applicable regulations, and the employer’s procedures; use or wear required protective equipment. Report hazards, defects, incidents, injuries and occupational illness concerns promptly; do not remove or make ineffective required protective devices. Complete required inspections, lockout, pre-use checks, permits, training verification or corrective actions.

HOW THIS SUBJECT MATTER EXPERT WORKS

• Safety above all. Everyone goes home daily, this is nonnegotiable. As subject matter expert in the company, always ensure all work in the business is completed in compliance with the Occupational Health and Safety Act, applicable regulations, and the company’s procedures.

• Hands-on. Works on the floor, not from an office. Goes online with the PLC, pulls the trend and puts a meter on the circuit before deciding what's wrong. Can explain why a machine kept faulting on night shift and then tell the line lead in plain terms what was fixed and what to watch.

• Owns the code. Every program in the plant has one approved master, a current backup and a revision history. No undocumented online edits, no forced I/O left in place, and no OEM closeout until everything is in hand.

• Fixes it once. Knows the difference between a reset and a root cause. Recurring faults get a permanent fix that is documented and verified. Measures success in uptime.

• Teacher. Builds controls capability in Maintenance and Electrical so the plant doesn't depend on one person or an OEM support line. Writes troubleshooting guides a technician can follow at 3 a.m., and coaches at the panel instead of taking over the laptop.

• Partner. Works shoulder to shoulder with Operations, Maintenance, Quality, IT/OT and OEMs. Holds integrators to the spec and the schedule, and raises problems early with data and a proposed fix.

• Builds standards, not complexity. Uses the greenfield window to set tag naming, alarm philosophy, HMI layouts and network architecture before bad habits form. Knows what a single site needs on day one and what can wait for the growth phase, and doesn't over-engineer.

CORE RESPONSIBILITIES

Controls & Automation

· Program, troubleshoot, modify, and maintain PLC, HMI, SCADA, VFD, servo, safety, instrumentation, vision, and industrial-network systems.

· Diagnose electrical, control, communication, sensor, drive, and equipment-integration failures.

· Optimize machine sequences, pacing, conveyors, accumulation, alarms, interlocks, and equipment handshakes.

· Validate all changes before returning equipment to production.

Production Equipment Support

Provide controls and automation support for:

· Coil handling, cuppers, bodymakers, trimmers, washers, decorators, printers, ovens, inside spray machines, neckers, and flangers.

· Vision, inspection, conveying, vacuum, palletizing, packaging, scrap-handling, utility, and plant-support systems.

· Troubleshooting & Reliability

· Serve as the escalation point for complex electrical, controls, network, and automation failures.

· Use PLC diagnostics, alarm histories, drive faults, network tools, trends, and electrical measurements to determine root cause.

· Implement permanent corrective actions for recurring or high-impact failures.

· Identify preventive maintenance opportunities and critical automation spare-parts requirements.

Electrical, Network and Change Control

· Read and interpret electrical schematics, panel drawings, I/O drawings, and technical manuals.

· Troubleshoot sensors, encoders, instrumentation, control valves, starters, drives, motors, and industrial networks.

· Support EtherNet/IP, PROFINET, Modbus TCP, OPC UA, and other installed networks.

· Maintain network records, asset inventories, software backups, revision histories, and approved master programs.

· Follow change-management, cybersecurity, remote-access, backup, and rollback requirements.

POINT-IN-TIME / SECONDARY RESPONSIBILITIES

Commissioning & Startup

· Support the installation, integration, commissioning, and startup of plant automation and production equipment.

· Review OEM electrical drawings, control narratives, I/O lists, network architecture, and safety circuits.

· Participate in FAT, SAT, power-up, I/O checkout, dry-cycle testing, production trials, qualification, and acceptance.

· Tune line controls, conveyors, accumulation, vacuum, and blow-off systems to achieve stable production flow.

· Ensure OEMs provide complete source code, passwords, licenses, backups, and documentation before closeout.

Projects and Continuous Improvement

· Deliver automation improvements supporting safety, quality, OEE, throughput, reliability, spoilage reduction, and energy efficiency.

· Develop project scopes, specifications, budgets, schedules, and performance measures.

· Review vendor designs and manage integrators and contractors through commissioning and performance testing.

· Document and verify results following implementation.

Training and Technical Development

· Train Maintenance and Electrical personnel in controls diagnostics and structured troubleshooting.

· Develop troubleshooting guides, standard work, technical documentation, and competency matrices.

· Coordinate knowledge transfer from OEMs and suppliers during commissioning and startup.

PREFERRED QUALIFICATIONS

· Bachelor’s degree in Engineering (Electrical, Automation, Controls, Mechatronics, Computer).

· 3–5 years of industrial automation or controls experience.

· Strong hands-on PLC programming and troubleshooting experience.

· Experience with HMIs, VFDs, servo systems, sensors, instrumentation, and industrial networks.

· Ability to read and interpret electrical schematics and controls documentation.

· Experience working with highly automated manufacturing equipment.

· Strong troubleshooting, analytical, and root-cause-analysis skills.

· Ability to work effectively across Engineering, Operations, Maintenance, Quality, IT/OT, and external suppliers.

· Ability to support off-shift activities during commissioning, startup, and critical production events.

ASSET QUALIFICATIONS (valued though not required)

· P.Eng. licence in good standing with PEO, or licensed in another Canadian province, or equivalent.

· Experience in high-speed continuous manufacturing.

· Aluminum beverage can manufacturing experience.

· Experience with Rockwell Automation ControlLogix / CompactLogix and/or Siemens S7 / TIA Portal.

· Greenfield manufacturing, equipment startup, or plant commissioning experience.

· Experience conducting FAT, SAT, commissioning, and equipment performance testing.

· Experience with industrial Ethernet networks, machine vision, motion control, and functional safety systems.

Apply About employer

More about this job

Responsibilities

Own and support plant-wide automation and control systems, including PLCs, HMIs, drives, instrumentation, machine controls, vision systems, and industrial networks, from commissioning through ongoing production. Troubleshoot failures, implement verified permanent improvements, maintain software and technical records, and train plant personnel in controls diagnostics.

Requirements

The posting prefers a bachelor’s degree in an engineering discipline and 3–5 years of industrial automation or controls experience. Candidates should have hands-on PLC programming and troubleshooting experience, familiarity with manufacturing controls and electrical documentation, and the ability to collaborate across teams and support commissioning or critical production events.

Skills

PLC Programming And Troubleshooting
HMI And SCADA Systems
VFD And Servo Systems
Industrial Networks
Instrumentation And Sensors
Electrical Schematics
Root Cause Analysis
Controls Reliability
Commissioning And Startup
FAT And SAT
Machine Vision
Motion Control
Functional Safety
Change Management
Technical Documentation
Cross-Functional Collaboration

Visa sponsorship

Not detected in the job text

Keywords

PLC
HMI
SCADA
Rockwell ControlLogix
CompactLogix
Siemens S7
TIA Portal
VFD
Servo Systems
EtherNet/IP
PROFINET
Modbus TCP
OPC UA
Industrial Ethernet
Machine Vision
Motion Control
Functional Safety
Instrumentation
Electrical Schematics
FAT
SAT
Commissioning
Startup
Root Cause Analysis
Change Management
Cybersecurity
OEE
High-Speed Manufacturing
Aluminum Beverage Cans
Continuous Improvement

Report this job