Find work in Canada.

331,018 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 11 mins ago
S
Product Development Engineer
Septodont
Bromont, QC
- Full-time
The company has an opening at its Design & Development Center located in Bromont, Quebec for a Product Development Engineer.
Added 11 mins ago
S
Maintenance Manager
Septodont
Cambridge, ON
- Full-time
Leads the electrical and mechanical maintenance staff to ensure all, preventative, corrective, and reactive maintenance activities are performed to support manufacturing operations.
Added 11 mins ago
S
Process Specialist II /Engineer II
Septodont
Cambridge, ON
- Full-time
The Process Engineer/ Process Specialist II is accountable for project execution and process system support across the organization. This role supports manufacturing operations, capital…
Added 11 mins ago
OC
Lead Engineer, Programs/Projects (Wastewater)
Ontario Clean Water Agency
Mississauga, ON · OCWA - Corporate Office
- Full-time
Coordinate with engineers, technical staff and/or partners to ensure project needs are met in a timely and effective manner.
Added 11 mins ago
FM
Controls Engineer
Federal Mfg
Oakville, ON · CA ON Oakville
- Full-time
Collaborate with project managers, mechanical engineers, electrical engineers, manufacturing teams, and customers throughout project execution.
Added 11 mins ago
ZF
Manufacturing Engineering
ZF Foxconn Chassis Modules
Windsor, ON
- Full-time
…programming & troubleshooting, manufacturing process improvements, mechanical improvements to tooling and equipment. Conformance to customer requirements. Must have programming experience…
Added 31 mins ago
W
Principal Instrumentation Engineer
Worley
Calgary, AB · Edmonton, AB · Vancouver, BC
- Full-time
The Lead Instrumentation & Controls Engineer provides technical leadership and project delivery oversight for instrumentation and control (I&C) engineering services in support of Worley and…
Added 31 mins ago
W
Instrumentation Engineer Level II
Worley
Calgary, AB · Edmonton, AB · Vancouver, BC
- Full-time
The Instrumentation & Controls Engineer provides instrumentation and control (I&C) engineering services to Worley and its customers. The role supports the delivery of I&C engineering work…
Added 31 mins ago
W
Senior Instrumentation Engineer
Worley
Calgary, AB · Edmonton, AB · Vancouver, BC
- Full-time
The Senior or Principal Instrumentation & Controls Engineer provides technical leadership and instrumentation and control (I&C) engineering expertise across projects for Worley and its…
Added 1 hour ago
TU
Research Engineer - Instrumentation
The University of British Columbia
Vancouver, BC
- $6,631.67 to $9,533.25 CAD / month
- Full-time
Research Group | Thermochemical Energy Conversion Systems Lab | Department Mechanical Engineering | Faculty of Applied Science
Added 1 hour ago
A
Senior Instrumentation & Control Engineer
Ausenco
Vancouver, BC
- Full-time
Ability to work within a multi-disciplinary project team including process, mechanical, civil-structural, electrical, instrumentation and CAD support
Added 1 hour ago
A
production engineer
ADM
Windsor, ON
- $66,000 to $96,000 CAD / year
- Full-time
- On-site
Added 1 hour ago
V/
mechanical design engineer
Ventex / Alumavent
Alliston, ON
- $50,000 to $65,000 CAD / year
- Full-time
- On-site
As a growing manufacturer, we are seeking a motivated *Mechanical Designer* to support our team. The designer will work in an office setting, reviewing specifications and other data to…
Added 1 hour ago
MM
Continous Imrovement Engineer
Modine Manufacturing Company
Calgary, AB
- Full-time
The Continuous Improvement Engineer will play a critical role in driving operational excellence across manufacturing and service operations. This position focuses on identifying…
Added 1 hour ago
CB
Coordinator, Capilano Energy
CapWest Build
Vancouver, BC
- Full-time
Registration as an Engineer-In-Training with EGBC would be considered an asset.
Added 1 hour ago
S
Clean Utilities Lead
Sanofi
Toronto, ON
- Full-time
Drive capital investment in systems by submitting project requests as needed for improving performance or reducing cost for other groups in management of systems.
Added 1 hour ago
E
Machinist
Emerson
Brantford, ON
- Full-time
Work with cylinder shop lead hand, manufacturing engineer and supervisor to safely solve machining tasks as they are presented.
Added 2 hours ago
Intermediate Project Manager
Babcock & Wilcox
Saint John, NB
B&W Canada is currently seeking a motivated individual to fill the role in its construction business as an intermediate Project Manager/Project Engineer.
Added 2 hours ago
TI
2027 Energy Engineering Intern
Trane Italia
Markham, ON
- Full-time
…you collaborate with peers across North America. As an Energy Engineer Intern, you may experience and assist…
Added 3 hours ago
OS
Reliability Engineer Co-op Student
Orion Steel Group
Regina, SK
- Full-time
The role of the Reliability Engineer - Co-op Student is to support the identification and assessment of risks that may adversely affect plant or business operations. Working under the…
Added 3 hours ago
OS
Reliability Engineer
Orion Steel Group
Regina, SK
- Full-time
Join Interpro Pipe & Steel as a Reliability Engineer, where you'll play a crucial role in enhancing the longevity and efficiency of our operations. This position offers the unique…
Added 3 hours ago
OS
Senior Mechanical Project Engineer
Orion Steel Group
Calgary, AB
- Full-time
We are seeking an experienced Senior Mechanical Project Engineer to join our team in Calgary, Alberta. As the Senior Mechanical Engineer, this individual will use their knowledge of…
Added 3 hours ago
OS
Senior Mechanical Project Engineer
Orion Steel Group
Red Deer, AB
- Full-time
We are seeking an experienced Senior Mechanical Project Engineer to join our team in Red Deer, Alberta. As the Senior Mechanical Project Engineer , this individual will use their knowledge…
Added 3 hours ago
S-
Senior Mechanical Engineer - $00 - $00 Yearly Salary
Sacr -Davey Engineering
North Vancouver, BC
- $139,800 to $171,700 CAD / year
- Full-time
- On-site
<div><div><div><div><div><div><div><div><span>Senior Mechanical Engineer</span><p></p><ul><li><b>Location</b>: Remote ? VANCOUVER BASED </li><li><b>Employment Type</b> Full Time…
Added 3 hours ago
S-
Senior Mechanical Engineer
Sacr -Davey Engineering
North Vancouver, BC
- $139,800 to $171,700 CAD / year
- Full-time
- On-site
<div><div><div><div><div><div><div><div><span>Senior Mechanical Engineer</span><p></p><ul><li><b>Location</b>: Remote ? VANCOUVER BASED </li><li><b>Employment Type</b> Full Time…

AtkinsRéalis

Senior Piping Stress Analyst Engineer

Mississauga, ON, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Nov 6, 2026
Posting language: English
Posted: Oct 7, 2026

Original job description

Overview

This position requires an experienced individual who is self-motivated and capable of working independently with minimal supervision, plans and executes the engineering activities assigned by the Technical Lead and/or Technical Manager, resolves routine and complex technical issues, and seeks guidance primarily for "first-of-a-kind", high-risk, interdisciplinary or very complex matters. The candidate shall be able to independently deliver most of the assigned work, while knowing when to seek specialized help from subject matter expert.

Your role

The qualified individual will be responsible for, but not limited to, the following:

Perform pipe stress evaluation of piping systems (nuclear class or non-nuclear class) in accordance with ASME Section III, Div.1, and/or ASME B31.1/B31.3 code requirements, including thermal, fatigue, seismic, linear and non-linear analyses.
Prepare engineering computations and analyses using applicable software (e.g., PipeStress, AutoPipe, Cesar II, MathCAD, ANSYS and LS-DYNA, etc.).
Model complex piping and support arrangements using finite element techniques.
Review of technical documents and drawings (e.g. equipment General Arrangement drawings, nozzle loads, equipment layout drawings, isometrics, pipe supports, flow diagrams and P&ID), calculations, design/analysis reports, design requirements, bill of materials, design specifications, technical specifications, data sheets, etc.
Review 3D piping model and equipment layout.
Prepare technical documents, such as calculations, design/analysis reports, design requirements, piping stress design basis reports, piping design specifications, technical specifications, data sheets, etc.
Support preparing TSSA CRN registration packages for pressure boundary systems.
Function as technical interface with client, suppliers, inter-discipline engineering teams, construction partners and project management groups.
Perform site visits to client and supplier shops as required. Support field construction and execution activities, as needed (site visits are required).
Perform engineering work following AtkinsRéalis/Candu Energy QA programs, and applicable codes, standards, and regulation requirements.
Provide technical mentorship and guidance to junior/intermediate engineers.
Handle complex or "first-of-a-kind" problems with limited direction, and recognize technical risks, limitations, and when escalation is necessary.
Estimate the manhour efforts and provide input to the design plan.

About You

Engineering Degree in Mechanical from an accredited university or equivalent degree as recognized by Professional Engineers Ontario (PEO) is required.
Registered or eligible to be registered as a Professional Engineer in the Province of Ontario (mandatory requirement).
Minimum 10 years of related work experience in mechanical engineering within a heavy industrial environment such as power, mining, oil & gas, nuclear etc. (knowledge of nuclear power systems would be an asset).
Design experience with piping supports for power, mining, oil & gas, etc., plants. (knowledge of nuclear power piping supports design per ASME III, Subsection NF is an asset).
Experience in piping supports design using PipeStress, AutoPipe, Cesar II, MathCAD, GT STRUDL or other similar software program is an asset.
Working knowledge of CSA B51, ASME B31.1, ASME B31.3, ASME Section VIII, ASCE, NBCC, AISC, and other applicable codes, standards or regulatory guides related to process equipment for power, mining, oil & gas, etc. (knowledge of nuclear power plant systems codes and regulations such as CSA N285.0, CSA N289, ASME Sec III would be an asset).
Must be able to work independently, define result oriented approach, perform or oversee the analysis, and drive conclusion based on technically sound defensible solutions.
Demonstrate good interpersonal skills and the ability to work in a multidisciplinary team environment.

Other Aspects

Working knowledge of CSA N285.0, CSA N289, and ASME Section III, and other applicable standards or regulatory guides related to nuclear plant components, pressure boundary equipment, and/or reactor systems is preferable.
Design engineering experience in nuclear class 1, 2, 3 and 6 piping systems, and its associated supports for Nuclear Power Plants is preferable.
Eligible to obtain Security Clearances through Public Works and Government Services Canada (PWGSC) is mandatory (for Candu internal and Client organization).
May be required to obtain Nuclear Energy Worker (NEW) status, as required by task assignments. Travels to client job sites are required.
Experience with time-history analysis (water hammer, pressure surge, etc. transient loads implementation) for piping systems is an asset.
Experience with buried pipe systems and seismic assessment for buried piping systems in accordance with Appendix VII of ASME B31.1, or other applicable codes (i.e., ASCE, AWWA M11, etc.) is an asset.
Qualification in the last five (5) years as a Specialized Professional Engineer to ASME Section III Division 1, Appendix XXIII is preferable.
Experience in supervising and coordinating a small team of engineers/designers for stress analysis activities is an asset.
Experience with stress analysis/supports design for steam piping systems in nuclear power plants is an asset.

Rewards & benefits

Explore the rewards and benefits that help you thrive – at every stage of your life and your career at AtkinsRéalis in Canada.

Enjoy competitive compensation, employee recognition, and a brilliant range of flexible benefits you can tailor to your health, wellbeing, financial and lifestyle needs.

Make the most of diverse opportunities for training and professional development to grow your skills and expertise.

And take advantage of our hybrid working culture and generous time-off policies to balance a fulfilling career with your personal life.

Be rewarded. Find out more.

About AtkinsRéalis

We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's'infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people.

Find out more.

Additional information

AtkinsRéalis cares about your privacy. AtkinsRéalis and other subsidiary or affiliated companies of AtkinsRéalis (referred to throughout as "AtkinsRéalis") are committed to protecting your privacy. Please consult our Privacy Notice on our Careers site to know more about how we collect, use, and transfer your Personal Data.

By submitting your personal information to AtkinsRéalis, you confirm that you have read and accept our Privacy Notice.

Appropriate accommodation will be provided upon request throughout the recruitment and hiring process as required by Company policy and the Accessibility for Ontarians with Disabilities Act (AODA).

Successful applicants will be notified about AtkinsRéalis' accommodation policies at the time the employment offer is extended, and the information will be shared with new personnel during the onboarding process.

Apply About employer

More about this job

Responsibilities

Perform piping stress evaluations and complex analyses, develop and review engineering calculations, reports, drawings, and 3D models, and support pressure-boundary registration and field construction activities. Coordinate with clients and multidisciplinary teams, provide technical guidance to junior staff, and identify technical risks while delivering work in accordance with applicable codes and quality programs.

Requirements

Requires a mechanical engineering degree and registration, or eligibility for registration, as a Professional Engineer in Ontario, along with at least 10 years of relevant heavy-industry mechanical engineering experience. Candidates should have piping stress and support design experience, knowledge of applicable engineering codes and analysis software, the ability to work independently and collaboratively, and eligibility to obtain Canadian security clearance.

Skills

Piping Stress Analysis
Finite Element Analysis
Piping Support Design
ASME Section III
ASME B31.1
ASME B31.3
PipeStress
AutoPIPE
CAESAR II
MathCAD
ANSYS
Seismic Analysis
Thermal Analysis
Fatigue Analysis
Technical Documentation
Engineering Mentorship

Benefits

Competitive Compensation
Employee Recognition
Flexible Benefits
Training and Professional Development
Hybrid Working
Paid Time Off

Visa sponsorship

Not detected in the job text

Keywords

Piping Stress Analysis
Piping Systems
Piping Supports
Finite Element Analysis
ASME Section III
ASME B31.1
ASME B31.3
CSA B51
CSA N285.0
CSA N289
ASME Section VIII
PipeStress
AutoPIPE
CAESAR II
MathCAD
ANSYS
LS-DYNA
GT STRUDL
Seismic Analysis
Thermal Analysis
Fatigue Analysis
Time-History Analysis
Water Hammer
Buried Pipe Systems
TSSA CRN Registration
Nuclear Power Plants
Professional Engineer Ontario
Nuclear Energy Worker
Engineering Quality Assurance
Technical Mentorship

Report this job