Jobs in Canada

Group jobs by employerEmail me new jobs Save this search

Added 15 days ago
Manufacturing Engineering
BWXT
Peterborough, ON
Reporting directly to the Manufacturing Engineering Manager, the Manufacturing Engineering Specialist is responsible for the estimating and execution of a broad range of manufacturing…
Added 15 days ago
RA
Prototype Assembler 2P- 2nd shift
Rockwell Automation
Cambridge, ON · Canada Cambridge (Dundas)
- Full-time
As a Prototype Assembler Level 2P, you will perform a variety of electronic and electro-mechanical assembly operations including wiring, component installation, hand soldering, cable…
Added 15 days ago
RA
Prototype Assembler 1P - Afternoon Shift
Rockwell Automation
Cambridge, ON · Canada Cambridge (Dundas)
- Full-time
Entry-level manufacturing, assembly, or production experience, or willingness to learn in a manufacturing environment.
Added 15 days ago
RA
Prototype Assembler 2P- 2nd shift
Rockwell Automation
Cambridge, ON · Canada Cambridge (Dundas)
- Full-time
As a Prototype Assembler Level 2P, you will perform a variety of electronic and electro-mechanical assembly operations including wiring, component installation, hand soldering, cable…
Added 15 days ago
SS
Designer, Mechanical
Samuel, Son & Co.
Concord, ON
- Full-time
Formulate heavy-duty machine design in CAD using simple, efficient and cost-effective processes – Design for Manufacturing & Assembly (DFMA)
Added 15 days ago
SS
Designer, Mechanical
Samuel, Son & Co.
Vaughan, ON
- Full-time
- Formulate heavy-duty machine design in CAD using simple, efficient and cost-effective processes – Design for Manufacturing & Assembly (DFMA)
Added 15 days ago
Talent Acquisition Specialist (1 Year Contract)
ATS Automation
Cambridge, ON
At ATS, a publicly traded global company with a proud 40-year history, we help drive the future with our factory-wide automation solutions. At ATS Industrial Automation, what we do matters…
Added 15 days ago
AI
Talent Acquisition Specialist (1 Year Contract)
ATS Industrial Automation
Cambridge, ON
- Contract
At ATS, a publicly traded global company with a proud 40-year history, we help drive the future with our factory-wide automation solutions. At ATS Industrial Automation, what we do matters…
Added 15 days ago
AC
Campus Recruiter
ATS Corporation
Cambridge, ON
- Full-time
At ATS, a publicly traded global company with a proud 40-year history, we help drive the future with our factory-wide automation solutions. At ATS Industrial Automation, what we do matters…
Added 19 days ago
RA
Production Test Technician 3P - 2nd Shift
Rockwell Automation
Cambridge, ON · Canada Cambridge (Dundas)
- Full-time
Rockwell Automation is a global technology leader focused on helping the world’s manufacturers be more productive, sustainable, and agile. With more than 28,000 employees who make the world…
Added 19 days ago
Intermediate Systems Designer
ATS Automation
Cambridge, ON
…learning technical aspects of a project and overseeing systems engineering activities specific to the project. You will work with the customer, ATS project manager, and the ATS design,…
Added 19 days ago
Junior Systems Designer
ATS Automation
Cambridge, ON
…learning technical aspects of a project and overseeing systems engineering activities specific to the project. You will work with the customer, ATS project manager, and the ATS design,…
Added 19 days ago
PG
Manufacturing Engineering Manager / Supervisor
Pangeo Group
Windsor, ON
- $110,000 to $135,000 CAD / year
- Full-time
The Manufacturing Engineering Manager is responsible for manufacturing and process engineering at the plant, and for the continuous improvement work that meets production, quality and…
Added 19 days ago
PG
Manufacturing Engineer
Pangeo Group
Windsor, ON
- $80,000 to $110,000 CAD / year
- Full-time
Under the general direction of the Manufacturing Engineering Manager / Supervisor, the Manufacturing Engineer works independently and confers regularly with division and corporate…
Added 20 days ago
FS
PCB Layout Designer
Fidus Systems
Canada
- Full-time
You must have a proven track record for delivering high-quality designs
Added 20 days ago
E
Valve Assembler
Emerson
Brantford, ON
- Full-time
Read, interpret and understand engineering drawings.
Added 20 days ago
FS
PCB Layout Designer
Fidus Systems
Remote, Canada
- Full-time
- Remote
You must have a proven track record for delivering high-quality designs
Added 20 days ago
AI
Systems Designer
ATS Industrial Automation
Cambridge, ON
- Full-time
…learning technical aspects of a project and overseeing systems engineering activities specific to the project. You will work with the customer, ATS project manager, and the ATS design,…
Added 20 days ago
Systems Designer
ATS Automation
Cambridge, ON
…learning technical aspects of a project and overseeing systems engineering activities specific to the project. You will work with the customer, ATS project manager, and the ATS design,…
Added 21 days ago
AI
Mechanical Design Manager
ATS Industrial Automation
Cambridge, ON
- Full-time
At ATS, a publicly traded global company with a proud 40-year history, we help drive the future with our factory-wide automation solutions. At ATS Industrial Automation, what we do matters…
Added 21 days ago
SS
Intermediate Mechanical Designer
Samuel, Son & Co.
Waterloo, ON
- Full-time
Apply sound mechanical design fundamentals, including loads, forces, speeds, materials, tolerances, manufacturing methods, assembly, serviceability, and component selection
Added 21 days ago
Mechanical Design Manager
ATS Automation
Cambridge, ON
At ATS, a publicly traded global company with a proud 40-year history, we help drive the future with our factory-wide automation solutions. At ATS Industrial Automation, what we do matters…
Added 21 days ago
AI
Project Coordinator
ATS Industrial Automation
Cambridge, ON
- Full-time
At ATS, a publicly traded global company with a proud 40-year history, we help drive the future with our factory-wide automation solutions. At ATS Industrial Automation, what we do matters…
Added 21 days ago
SS
Intermediate Mechanical Designer
Samuel, Son & Co.
Waterloo, ON
- Full-time
- Apply sound mechanical design fundamentals, including loads, forces, speeds, materials, tolerances, manufacturing methods, assembly, serviceability, and component selection
Added 21 days ago
WH
Senior Automation Engineer
Waterstone Human capital
Toronto, ON
- Full-time
…manufacturer of large-scale, custom industrial equipment for the heavy manufacturing sector, handling everything from mechanical and electrical engineering to PLC programming and assembly…

ATS Automation

Intermediate Systems Designer

Cambridge, ON, N3H 4R7, Canada

Pay Rate: $40.38-$55.53

Apply on jobs.atsautomation.com About employer

Applications open in a new tab.

Job details

Pay: Pay Rate: $40.38-$55.53
Experience: 5 years of prior experience in mechanical, electrical, controls or systems engineering support, preferably in an automation environment and with customer interaction is an asset.
Posting language: English
Posted: Oct 21, 2026

Original job description

Join our globally growing team at ATS Industrial Automation where we create complex automation solutions at the highest level that sustainably impact lives around the world.

At ATS, a publicly traded global company with a proud 40-year history, we help drive the future with our factory-wide automation solutions. At ATS Industrial Automation, what we do matters - both to our customers and to their customers. With 1000 skilled employees around the world, we design, build and service mission-critical automated assembly and test solutions for mobility, nuclear and specialty automation. Our customers are leaders in their industries and rely on us to deliver what we promise - on time and on budget. Combined with our broad product portfolio, financial strength and global presence, we provide our customers with the best automation solutions wherever and whenever they need them.

Job Description

Total Compensation & Benefits

Pay Rate: $40.38-$55.53
Eligible for Annual Incentive Bonus
Stock Purchase Plan
3 Weeks Vacation
Health Care Benefits + $600 Health Care Spending Account
Employee Engagement Events (Employee BBQ’s and lunches, weekly treat day, etc.)
Employee Development Programs

MAJOR DUTIES:

As a Systems Designer/Engineer - Nuclear you are responsible for learning technical aspects of a project and overseeing systems engineering activities specific to the project. You will work with the customer, ATS project manager, and the ATS design, assembly, and software teams to design the solutions that meet the customer's requirements.

You will get the opportunity to develop into a technical leader by taking on the following 3 roles:

understanding the customer's technology and process and becoming the subject matter expert in the equipment/system

providing project technical clarity by defining system requirements and validating system capability

being the technical leader on the system from cradle to launch, guiding the design team in ensuring project technical requirements are met. You will support technical execution of the project, contribute to risk mitigation, and drive improvements in quality, cost, and delivery.

SPECIFIC RESPONSIBILITIES:

Subject Matter Expertise
- Learn the customer process and become the local expert in it, to support the design, integration, and verification of the machines/tools/systems.
- Prepare component and system level analysis, calculations, or studies including but not limited to:
  - Structural integrity
  - Functional capability, drive sizing - speeds, strokes, loads, etc.
  - Accuracy, Gauge R&R
  - Pressure/flow/heat transfer
  - Compliance with applicable codes and standards.
  - Prepare (or assist in preparation of) technical project documents such as Failure Modes and Effects Analyses and Safety Risk Assessments, ALARA reports, installation/commissioning plans, operating sequence/flowcharts, execution storyboards, operating and maintenance manuals, etc.

Requirements Definition and Verification
- Assist in compiling and documenting design requirements, technical/functional specifications, etc.
- Learn, understand and flow down customer and industry requirements, including applicable codes and standards, to ensure overall machine compliance.
- Prepare vendor technical specifications and interface with vendors of process critical third party equipment, including acceptance testing and buy-off of equipment at vendor site.
- Using tools such as a Verification Matrix, plan for verification of all design/system requirements.
- Lead (or support) requirements verification by evaluating engineering drawings and specifications for conformance to design inputs/requirements, performing analysis (calculations, simulations, etc.) and testing (POP testing, design validation testing, factory acceptance testing, site acceptance testing).
- Lead (or support) planning of Acceptance Testing, including preparation of test plans, ensuring availability of mock-ups, fixtures, test support equipment, etc., and performing test execution with the customer.

Additional Information

Project Technical Leadership
- Be the project technical lead in Design Plan preparation, understand responsibilities for implementation, and perform design related activities in accordance with the Design Plan.
- Perform problem solving and coordination of project engineering work.
- Provide project support during system startup, integration and buy-off.
- Lead design reviews with customers, vendors, and internal design groups
- Lead project technical risk mitigation activities during design stage, preparing CTRAs (concept technical risk assessments), and performing POP (proof of principle) testing.
- Manage project technical risk throughout the project: highlight high risk areas and create mitigation plans to reduce risk.
- Work with ‘process critical’ third party equipment vendors to ensure compliance with requirements and adherence to budget and schedule.

ADDITIONAL RESPONSIBILITIES:

Assist in activities for product improvements or first-of-a-kind innovations.
Recognize the onset of technical problems in various disciplines and support development of solutions.
Coordinate the collection and dissemination of technical information within the company and with the customer.
Participate in customer meetings and resolve engineering and customer/project management issues.
Learn and comply with applicable codes and standards, accepted engineering practices, and ATS standards.
Follow engineering processes and provide feedback to assist in continuous improvement initiatives, including development of standards and procedures.
Support development of design concepts and labour hours estimates for quote preparation.
Strictly follow CSA N299/B51/N285/NQA Quality requirements as defined within the ATS QA manuals and procedures.
Willing to work as a Nuclear Energy Worker (NEW), and work in radioactive environments including nuclear site work.
Ensure that all business activities are performed with the highest ethical standards and in compliance with the ATS Code of Business Conduct.
Perform other specific duties or projects, as assigned.

HEALTH AND SAFETY REQUIREMENTS:

All employees have the responsibility to work in a healthy and safe manner, report any health, safety or environmental concern to their manager or supervisor in a timely manner, and participate in the safety culture of the organization.

Employee responsibilities for Health, Safety and Environment include:

Work in conformance with divisional health, safety and environmental procedures and compliance with legislative requirements.
Refrain from removing or altering safety devices or guarding unless hazardous energies are controlled through lockout-tagout methods.
Report any unsafe conditions or unsafe acts, defects in any equipment or protective device, and any accidents/incidents to the supervisor.
Ensure that the required protective equipment is used for assigned tasks.
Attend all required health, safety and environmental training.
Assist in investigating accidents/incidents where applicable.
Refrain from engaging in any prank, contest, feat of strength, unnecessary running or rough and boisterous conduct.

Qualifications

Education:

A post-secondary degree in Mechanical, Mechatronics, Systems Design, Electrical, or Computer Engineering, Engineering Physics, Engineering Science, or equivalent.

Experience:

A thorough understanding of machine design and build, and structured problem solving.
Competent in mechanical CAD software (SolidWorks preferred), capable of designing tooling from sketches or verbal concepts, with a working knowledge of common machine shop techniques.
5 years of prior experience in mechanical, electrical, controls or systems engineering support, preferably in an automation environment and with customer interaction is an asset.
Experience in nuclear tooling/equipment development is an asset.
Excellent communication skills and ability to lead or work as part of a multi-disciplinary project team.

Why should you join ATS Industrial Automation?

Be a part of an engaged, empowered and innovative global workforce
We offer a robust total rewards package- Competitive starting salaries, comprehensive health and dental benefits, overtime pay, employee bonus, RSP matching, Employee Share Purchase Program
We provide awesome work perks such as treat days, gourmet coffee and beverages, subsidized breakfast and lunches in our cafeteria, employee referral bonuses and lots more.
We are intentional about your professional growth and development through internal career opportunities and our educational reimbursement program.

The Compensation offered will be based on the local job market and may vary depending on factors such as the job-related knowledge, skills, experience of the selected candidate, as well as other objective business considerations. Subject to these considerations, the total compensation package for this position may also include other elements, such as an annual cash incentive in addition to a full range of medical, retirement, and/or other benefits. Details of these benefit plans will be provided when the selected job candidate receives an offer of employment.

This role represents an existing vacancy within the organization.

ATS is in compliance with the Accessibility for Ontarians with Disability Act (AODA), 2005 and will, upon request, assist those who may require specific accommodations due to personal disability. We would ask those who require assistance to notify our offices as soon as possible if accommodation is necessary.

The ATS applicant tracking system may utilize AI software with pre‑defined, rule‑based filters to organize and manage application materials. Rule‑based filters operate solely on fixed criteria and do not perform autonomous evaluation or generate independent recommendations. All hiring decisions continue to involve human review and judgment.

If you're excited about this role, but do not meet all the qualifications listed above, you are still encouraged to apply.

Apply on jobs.atsautomation.com About employer

More about this job

Responsibilities

The Systems Designer will oversee systems engineering activities, including defining requirements, validating system capabilities, and leading technical execution from design to launch. They will act as a subject matter expert, coordinating with cross-functional teams and customers to ensure project compliance with technical and safety standards.

Requirements

Candidates must hold a post-secondary degree in Engineering and possess a thorough understanding of machine design and structured problem-solving. Experience in automation environments and proficiency with mechanical CAD software, specifically SolidWorks, is required.

Skills

Machine design
Systems engineering
SolidWorks
Structural integrity analysis
Drive sizing
Gauge R&R
Failure modes and effects analysis
Safety risk assessment
Requirements verification
Technical leadership
Project management
Automation solutions
Problem solving
Vendor management
Nuclear safety standards

Benefits

Annual incentive bonus
Stock purchase plan
3 weeks vacation
Health care benefits
Health care spending account
Employee engagement events
Employee development programs
Educational reimbursement program

Visa sponsorship

Not detected in the job text

Keywords

Automation
Systems Design
Mechanical Engineering
Mechatronics
Electrical Engineering
Computer Engineering
SolidWorks
CAD
Nuclear
Machine Shop
FMEA
ALARA
Verification Matrix
Factory Acceptance Testing
Site Acceptance Testing
Risk Mitigation
CSA N299
B51
N285
NQA
Technical Leadership
Process Engineering
Tooling
Equipment Development
Quality Assurance

Report this job

Work requirements

Jobs in Canada