Find work in Canada.

483,722 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 22 hours ago
HT
Assembly Technician (Contract)
Husky Technologies
Bolton, ON
- Full-time
Suggest modifications or improvements to parts, tools, assembly methods, or procedures as part of continuous improvement initiatives.
Added 1 day ago
A
Mechanical Designer
Actalent
Ottawa, ON
- $40 to $60 CAD / hour
- Full-time
Apply Design-to-Cost and Design for Manufacturing and Assembly (DFMA) principles to optimize designs for production.
Added 1 day ago
HT
Assembly Technician (Contract)
Husky Technologies
Bolton, ON
- Full-time
Suggest modifications or improvements to parts, tools, assembly methods, or procedures as part of continuous improvement initiatives.
Added 1 day ago
S
Method Technician - Finishing
Safran
Mirabel, QC
- Full-time
The person we are looking for enjoys contact with the field and knows how to work effectively in a multidisciplinary team to solve technical problems. They will be recognized for their…
Added 1 day ago
HT
Assembly Technician (Contract)
Husky Technologies
Bolton, ON
- Full-time
Suggest modifications or improvements to parts, tools, assembly methods, or procedures as part of continuous improvement initiatives.
Added 1 day ago
Supervisor, Design
National Research Council Canada
Ottawa, ON
…efficiently utilizing available human and physical resources and methods. The position serves as the source of highest-level technical expertise within the design unit and provides input,…
Added 1 day ago
HT
Assembly Technician (Contract)
Husky Technologies
Bolton, ON
- Full-time
Suggest modifications or improvements to parts, tools, assembly methods, or procedures as part of continuous improvement initiatives.
Added 1 day ago
S
Method Technician - Finishing
Safran
Mirabel, QC
- Full-time
The person we are looking for enjoys contact with the field and knows how to work effectively in a multidisciplinary team to solve technical problems. They will be recognized for their…
Added 1 day ago
HT
Assembly Technician (Contract)
Husky Technologies
Bolton, ON
- Full-time
Suggest modifications or improvements to parts, tools, assembly methods, or procedures as part of continuous improvement initiatives.
Added 2 days ago
EL
Director, Packaging Development, Skincare
Estée Lauder Companies
Markham, ON
- Full-time
The Director, Global Packaging Development is a senior organizational leader responsible for leading Packaging Development across an assigned category and supporting one or more global…
Added 2 days ago
HT
Assembly Technician (Contract)
Husky Technologies
Bolton, ON
- Full-time
Suggest modifications or improvements to parts, tools, assembly methods, or procedures as part of continuous improvement initiatives.
Added 2 days ago
AI
Assembly Lab Lead-Hand
Apex Industries
Moncton, NB
- Full-time
The Assembly Lab Lead-Hand is a hands-on working leader responsible for coordinating the day-to-day activities of the Assembly Lab, where Optical Lens Coating and Cleaning Machines are…
Added 2 days ago
FI
Mechanical Design Engineer
FulcrumAir Inc
AB · Calgary, Alberta
- Full-time
Company Overview: FulcrumAir is a world leader in UAV and Aerial Robotics Technology for the power line industry. Our unique and innovative technology is creating safer, more efficient, and…
Added 2 days ago
AP
Product Quality Customer Support Specialist (English version)
Averna Powered by Spherea
Montreal, QC
- Full-time
As of January 2026, Averna and Spherea joined forces to form the Spherea Group. A global Test & Quality Solution leader, Averna Powered by Spherea partners with product designers,…
Added 2 days ago
Intermediate Systems Designer
ATS Automation
Cambridge, ON
3) being the technical leader on the system from cradle to launch, guiding the design team in ensuring project technical requirements are met. You will support technical execution of the…
Added 2 days ago
BA
Building Envelope QA/QC Technician
Bothwell Accurate Co
Surrey, BC
- Full-time
Monitor manufacturing processes, equipment calibration records, and assembly methods to identify potential quality concerns and prevent defects
Added 2 days ago
R
Stage - Hiver 2027 - Genie de la fabrication / Internship - Winter 2027 - Manufacturing engineering,
RTX
Longueuil, QC
- Full-time
Pratt & Whitney Canada (P&WC) est un leader mondial de l’innovation aérospatiale, dont le siège social est situé à Longueuil, au Québec, depuis 1928. Nous concevons et fabriquons des…
Added 2 days ago
HT
Assembly Technician (Contract)
Husky Technologies
Bolton, ON
- Full-time
Suggest modifications or improvements to parts, tools, assembly methods, or procedures as part of continuous improvement initiatives.
Added 2 days ago
TN
Quality Supervisor
The NARMCO Group
Windsor, ON
- Full-time
Central Stampings Limited is an industry leader in the automotive industry for metal stamping and assembly. As a result of continuously growing our professional team, we have a challenging…
Added 2 days ago
A
Product Quality Customer Support Specialist (English version)
Averna
Montreal, QC
- Full-time
As of January 2026, Averna and Spherea joined forces to form the Spherea Group. A global Test & Quality Solution leader, Averna Powered by Spherea partners with product designers,…
Added 2 days ago
HT
Assembly Technician (Contract)
Husky Technologies
Bolton, ON
- Full-time
Suggest modifications or improvements to parts, tools, assembly methods, or procedures as part of continuous improvement initiatives.
Added 2 days ago
D
Mechanical Engineer
DarkVision
North Vancouver, BC
- Full-time
…science with real-world applications. We invite you to join our team for the exciting journey ahead as we become the global leader in industrial…
Added 2 days ago
HT
Assembly Technician (Contract)
Husky Technologies
Bolton, ON
- Full-time
Suggest modifications or improvements to parts, tools, assembly methods, or procedures as part of continuous improvement initiatives.
Added 2 days ago
Director, Packaging Development, Skincare
ELC Beauty LLC
Markham, ON
The Director, Global Packaging Development is a senior organizational leader responsible for leading Packaging Development across an assigned category and supporting one or more global…
Added 3 days ago
HT
Assembly Technician (Contract)
Husky Technologies
Bolton, ON
- Full-time
Suggest modifications or improvements to parts, tools, assembly methods, or procedures as part of continuous improvement initiatives.

ATS Automation

Intermediate Systems Designer

Cambridge, ON, N3H 4R7, Canada

Pay Rate: $40.38-$55.53

Apply About employer

Applications open in a new tab.

Job details

Pay: Pay Rate: $40.38-$55.53
Experience: 5 years of prior experience in mechanical, electrical, controls or systems engineering support, preferably in an automation environment and with customer interaction is an asset.
Posting language: English
Posted: Oct 21, 2026

Original job description

Join our globally growing team at ATS Industrial Automation where we create complex automation solutions at the highest level that sustainably impact lives around the world.

At ATS, a publicly traded global company with a proud 40-year history, we help drive the future with our factory-wide automation solutions. At ATS Industrial Automation, what we do matters - both to our customers and to their customers. With 1000 skilled employees around the world, we design, build and service mission-critical automated assembly and test solutions for mobility, nuclear and specialty automation. Our customers are leaders in their industries and rely on us to deliver what we promise - on time and on budget. Combined with our broad product portfolio, financial strength and global presence, we provide our customers with the best automation solutions wherever and whenever they need them.

Job Description

Total Compensation & Benefits

Pay Rate: $40.38-$55.53
Eligible for Annual Incentive Bonus
Stock Purchase Plan
3 Weeks Vacation
Health Care Benefits + $600 Health Care Spending Account
Employee Engagement Events (Employee BBQ’s and lunches, weekly treat day, etc.)
Employee Development Programs

MAJOR DUTIES:

As a Systems Designer/Engineer - Nuclear you are responsible for learning technical aspects of a project and overseeing systems engineering activities specific to the project. You will work with the customer, ATS project manager, and the ATS design, assembly, and software teams to design the solutions that meet the customer's requirements.

You will get the opportunity to develop into a technical leader by taking on the following 3 roles:

understanding the customer's technology and process and becoming the subject matter expert in the equipment/system

providing project technical clarity by defining system requirements and validating system capability

being the technical leader on the system from cradle to launch, guiding the design team in ensuring project technical requirements are met. You will support technical execution of the project, contribute to risk mitigation, and drive improvements in quality, cost, and delivery.

SPECIFIC RESPONSIBILITIES:

Subject Matter Expertise
- Learn the customer process and become the local expert in it, to support the design, integration, and verification of the machines/tools/systems.
- Prepare component and system level analysis, calculations, or studies including but not limited to:
  - Structural integrity
  - Functional capability, drive sizing - speeds, strokes, loads, etc.
  - Accuracy, Gauge R&R
  - Pressure/flow/heat transfer
  - Compliance with applicable codes and standards.
  - Prepare (or assist in preparation of) technical project documents such as Failure Modes and Effects Analyses and Safety Risk Assessments, ALARA reports, installation/commissioning plans, operating sequence/flowcharts, execution storyboards, operating and maintenance manuals, etc.

Requirements Definition and Verification
- Assist in compiling and documenting design requirements, technical/functional specifications, etc.
- Learn, understand and flow down customer and industry requirements, including applicable codes and standards, to ensure overall machine compliance.
- Prepare vendor technical specifications and interface with vendors of process critical third party equipment, including acceptance testing and buy-off of equipment at vendor site.
- Using tools such as a Verification Matrix, plan for verification of all design/system requirements.
- Lead (or support) requirements verification by evaluating engineering drawings and specifications for conformance to design inputs/requirements, performing analysis (calculations, simulations, etc.) and testing (POP testing, design validation testing, factory acceptance testing, site acceptance testing).
- Lead (or support) planning of Acceptance Testing, including preparation of test plans, ensuring availability of mock-ups, fixtures, test support equipment, etc., and performing test execution with the customer.

Additional Information

Project Technical Leadership
- Be the project technical lead in Design Plan preparation, understand responsibilities for implementation, and perform design related activities in accordance with the Design Plan.
- Perform problem solving and coordination of project engineering work.
- Provide project support during system startup, integration and buy-off.
- Lead design reviews with customers, vendors, and internal design groups
- Lead project technical risk mitigation activities during design stage, preparing CTRAs (concept technical risk assessments), and performing POP (proof of principle) testing.
- Manage project technical risk throughout the project: highlight high risk areas and create mitigation plans to reduce risk.
- Work with ‘process critical’ third party equipment vendors to ensure compliance with requirements and adherence to budget and schedule.

ADDITIONAL RESPONSIBILITIES:

Assist in activities for product improvements or first-of-a-kind innovations.
Recognize the onset of technical problems in various disciplines and support development of solutions.
Coordinate the collection and dissemination of technical information within the company and with the customer.
Participate in customer meetings and resolve engineering and customer/project management issues.
Learn and comply with applicable codes and standards, accepted engineering practices, and ATS standards.
Follow engineering processes and provide feedback to assist in continuous improvement initiatives, including development of standards and procedures.
Support development of design concepts and labour hours estimates for quote preparation.
Strictly follow CSA N299/B51/N285/NQA Quality requirements as defined within the ATS QA manuals and procedures.
Willing to work as a Nuclear Energy Worker (NEW), and work in radioactive environments including nuclear site work.
Ensure that all business activities are performed with the highest ethical standards and in compliance with the ATS Code of Business Conduct.
Perform other specific duties or projects, as assigned.

HEALTH AND SAFETY REQUIREMENTS:

All employees have the responsibility to work in a healthy and safe manner, report any health, safety or environmental concern to their manager or supervisor in a timely manner, and participate in the safety culture of the organization.

Employee responsibilities for Health, Safety and Environment include:

Work in conformance with divisional health, safety and environmental procedures and compliance with legislative requirements.
Refrain from removing or altering safety devices or guarding unless hazardous energies are controlled through lockout-tagout methods.
Report any unsafe conditions or unsafe acts, defects in any equipment or protective device, and any accidents/incidents to the supervisor.
Ensure that the required protective equipment is used for assigned tasks.
Attend all required health, safety and environmental training.
Assist in investigating accidents/incidents where applicable.
Refrain from engaging in any prank, contest, feat of strength, unnecessary running or rough and boisterous conduct.

Qualifications

Education:

A post-secondary degree in Mechanical, Mechatronics, Systems Design, Electrical, or Computer Engineering, Engineering Physics, Engineering Science, or equivalent.

Experience:

A thorough understanding of machine design and build, and structured problem solving.
Competent in mechanical CAD software (SolidWorks preferred), capable of designing tooling from sketches or verbal concepts, with a working knowledge of common machine shop techniques.
5 years of prior experience in mechanical, electrical, controls or systems engineering support, preferably in an automation environment and with customer interaction is an asset.
Experience in nuclear tooling/equipment development is an asset.
Excellent communication skills and ability to lead or work as part of a multi-disciplinary project team.

Why should you join ATS Industrial Automation?

Be a part of an engaged, empowered and innovative global workforce
We offer a robust total rewards package- Competitive starting salaries, comprehensive health and dental benefits, overtime pay, employee bonus, RSP matching, Employee Share Purchase Program
We provide awesome work perks such as treat days, gourmet coffee and beverages, subsidized breakfast and lunches in our cafeteria, employee referral bonuses and lots more.
We are intentional about your professional growth and development through internal career opportunities and our educational reimbursement program.

The Compensation offered will be based on the local job market and may vary depending on factors such as the job-related knowledge, skills, experience of the selected candidate, as well as other objective business considerations. Subject to these considerations, the total compensation package for this position may also include other elements, such as an annual cash incentive in addition to a full range of medical, retirement, and/or other benefits. Details of these benefit plans will be provided when the selected job candidate receives an offer of employment.

This role represents an existing vacancy within the organization.

ATS is in compliance with the Accessibility for Ontarians with Disability Act (AODA), 2005 and will, upon request, assist those who may require specific accommodations due to personal disability. We would ask those who require assistance to notify our offices as soon as possible if accommodation is necessary.

The ATS applicant tracking system may utilize AI software with pre‑defined, rule‑based filters to organize and manage application materials. Rule‑based filters operate solely on fixed criteria and do not perform autonomous evaluation or generate independent recommendations. All hiring decisions continue to involve human review and judgment.

If you're excited about this role, but do not meet all the qualifications listed above, you are still encouraged to apply.

Apply About employer

More about this job

Responsibilities

The Systems Designer will oversee systems engineering activities, including defining requirements, validating system capabilities, and leading technical execution from design to launch. They will act as a subject matter expert, coordinating with cross-functional teams and customers to ensure project compliance with technical and safety standards.

Requirements

Candidates must hold a post-secondary degree in Engineering and possess a thorough understanding of machine design and structured problem-solving. Experience in automation environments and proficiency with mechanical CAD software, specifically SolidWorks, is required.

Skills

Machine design
Systems engineering
SolidWorks
Structural integrity analysis
Drive sizing
Gauge R&R
Failure modes and effects analysis
Safety risk assessment
Requirements verification
Technical leadership
Project management
Automation solutions
Problem solving
Vendor management
Nuclear safety standards

Benefits

Annual incentive bonus
Stock purchase plan
3 weeks vacation
Health care benefits
Health care spending account
Employee engagement events
Employee development programs
Educational reimbursement program

Visa sponsorship

Not detected in the job text

Keywords

Automation
Systems Design
Mechanical Engineering
Mechatronics
Electrical Engineering
Computer Engineering
SolidWorks
CAD
Nuclear
Machine Shop
FMEA
ALARA
Verification Matrix
Factory Acceptance Testing
Site Acceptance Testing
Risk Mitigation
CSA N299
B51
N285
NQA
Technical Leadership
Process Engineering
Tooling
Equipment Development
Quality Assurance

Report this job