Find work in Canada.

553,618 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 1 day ago
Stress Analysis Engineer
BWXT
Peterborough, ON
…Fuel Handling business is involved in the design, manufacture, development, testing, parts supply, and service of on-power refueling, reactor maintenance, and nuclear medicine delivery…
Added 2 days ago
Manufacturing Engineering Intern
Velatron Technologies
Kitchener, ON
- Assist in development of new CAD models of tooling / arbors as well as Transformers and Inductors for new design development.
Added 2 days ago
ST
Manufacturing Engineer
Sinclair Technologies
Aurora, ON
- $50,000 to $80,000 CAD / year
- Full-time
…including design for manufacturability (DFM) reviews, process development, tooling and fixture design, work instructions, pilot builds, and production…
Added 3 days ago
Industrial Engineering - Manufacturing Designer
Tigercat | MacDonald Steel
Brant, ON
As an Industrial Engineering - Manufacturing Designer, you will work with the production team to develop jigs, fixtures, tools, material handling devices and processes to aid in the…
Added 3 days ago
E
Data Engineer
eBay
Toronto, ON
- Full-time
Raise the engineering bar: Advocate for continuous improvement of our data architecture, development practices, tooling, and technology stack.
Added 4 days ago
Procurement Lead/Senior Buyer
BWXT
Peterborough, ON
…Fuel Handling business is involved in the design, manufacture, development, testing, parts supply, and service of on-power refueling, reactor maintenance, and nuclear medicine delivery…
Added 5 days ago
EH
Mechanical Designer
Ellos HR Solutions
Cambridge, ON · Greater Kitchener-Cambridge-Waterloo Metropolitan Area
- Full-time
🚨 NOW HIRING | Mechanical Designer – Automated Equipment & Robotics
Added 5 days ago
M
Tooling Designer
Multimatic
Markham, ON · Multimatic Advanced Manufacturing Technologies
- Full-time
…dedication of the employees. MAMT is an industry leading engineering development center that relies on its highly talented staff, following the company’s established systems and best…
Added 5 days ago
NF
Tool Designer (Term 6 Months)
New Flyer
Winnipeg, MB
- Temporary
We are seeking a skilled Tool Designer to support the development and production of bus structures. In this role, you will design and develop tooling solutions that ensure the fit, form,…
Added 5 days ago
Manufacturing Engineering
BWXT
Peterborough, ON
…Fuel Handling group is involved in the design, manufacture, development, testing, parts supply, and service of on-power refueling, reactor maintenance, and nuclear medicine delivery tooling…
Added 6 days ago
AP
Mechanical Designer (English version)
Averna Powered by Spherea
Montreal, QC
- Full-time
The Mechanical Designer challenge in a few words
Added 6 days ago
Gainsight Administrator
Braze
Toronto, ON
Manage data and integrations: Use Data Designer and Rules to ingest, transform, and merge data for reporting and automations; partner with Salesforce admins and Data teams on Gainsight…
Added 6 days ago
B
Gainsight Administrator
Braze
Toronto, ON
- Full-time
Manage data and integrations: Use Data Designer and Rules to ingest, transform, and merge data for reporting and automations; partner with Salesforce admins and Data teams on Gainsight…
Added 6 days ago
AP
Mechanical Designer (English version)
Averna Powered by Spherea
Montreal, QC
- Full-time
The Mechanical Designer challenge in a few words:
Added 6 days ago
NF
Tool Designer (Term 6 Months)
New Flyer
Winnipeg, MB
- Temporary
We are seeking a skilled Tool Designer to support the development and production of bus structures. In this role, you will design and develop tooling solutions that ensure the fit, form,…
Added 8 days ago
CR
Ingénieur(e) méthode - Methods Engineer
CAD Railway Industries
Montreal, QC
- Full-time
Dans leurs projets, nos équipes voient donc à designer des équipements qui répondront aux besoins de ces mêmes clients qui œuvrent autant du coté marchandise que passagers.
Added 8 days ago
KC
Senior Embedded Software Designer (6+ month Contract)
Kepler Communications Inc.
Canada
- Contract
$1,500 annual professional development fund to support your growth.
Added 8 days ago
Senior Product Designer, Mapping
Lyft
Toronto, ON
We’re looking for a Senior Product Designer to advocate and maintain a user-obsessed culture within Lyft, and be happy and comfortable in a fast-paced, ever-changing environment. You'll…
Added 8 days ago
Concepteur audio technique / Technical Audio Designer
Highdive
Montreal, QC
As a Technical Audio Designer, you sit between sound design and engineering, turning audio assets into polished, performant in-game systems. Working with audio designers, engineers, and…
Added 8 days ago
Manufacturing Project Coordinator
BWXT
Peterborough, ON
BWXT NEC's Fuel Handling and Engineered Solutions group is involved in the design, manufacture, development, testing, parts supply, and service of on-power refueling, reactor maintenance,…
Added 9 days ago
Intermediate Systems Designer
ATS Automation
Cambridge, ON
As a Systems Designer/Engineer - Nuclear you are responsible for learning technical aspects of a project and overseeing systems engineering activities specific to the project. You will work…
Added 9 days ago
Junior Systems Designer
ATS Automation
Cambridge, ON
As a Systems Designer/Engineer - Nuclear you are responsible for learning technical aspects of a project and overseeing systems engineering activities specific to the project. You will work…
Added 10 days ago
SP
Senior Readiness Designer
Salesforce Partner Canada
Toronto, ON
- Full-time
Explore new creative and AI-enabled approaches - including Agentforce, Slack AI, and other internal tooling - to improve quality, consistency, and speed of content development.
Added 10 days ago
IG
Tooling Designer
Insight Global
Longueuil, QC
- $20 to $38 CAD / hour
- Contract
Insight Global is seeking a Tooling Designer to join a top aerospace company in Longueuil, QC. This team is responsible for designing custom tooling solutions that enable the assembly,…
Added 10 days ago
AI
Systems Designer
ATS Industrial Automation
Cambridge, ON
- Full-time
As a Systems Designer/Engineer - Nuclear you are responsible for learning technical aspects of a project and overseeing systems engineering activities specific to the project. You will work…

ATS Automation

Junior Systems Designer

Cambridge, ON, N3H 4R7, Canada

Pay Rate: $32.69-$44.95 per hour

Apply About employer

Applications open in a new tab.

Job details

Pay: Pay Rate: $32.69-$44.95 per hour
Posting language: English
Posted: Oct 21, 2026

Original job description

Join our globally growing team at ATS Industrial Automation where we create complex automation solutions at the highest level that sustainably impact lives around the world.

At ATS, a publicly traded global company with a proud 40-year history, we help drive the future with our factory-wide automation solutions. At ATS Industrial Automation, what we do matters - both to our customers and to their customers. With 1000 skilled employees around the world, we design, build and service mission-critical automated assembly and test solutions for mobility, nuclear and specialty automation. Our customers are leaders in their industries and rely on us to deliver what we promise - on time and on budget. Combined with our broad product portfolio, financial strength and global presence, we provide our customers with the best automation solutions wherever and whenever they need them.

Total Compensation & Benefits

Pay Rate: $32.69-$44.95 per hour
Eligible for Annual Incentive Bonus
Stock Purchase Plan
3 Weeks Vacation
Health Care Benefits + $600 Health Care Spending Account
Employee Engagement Events (Employee BBQ’s and lunches, weekly snack day, etc.) 
Employee Development Programs

Major Duties

As a Systems Designer/Engineer - Nuclear you are responsible for learning technical aspects of a project and overseeing systems engineering activities specific to the project. You will work with the customer, ATS project manager, and the ATS design, assembly, and software teams to design the solutions that meet the customer's requirements.

You will get the opportunity to develop into a technical leader by taking on the following 3 roles:

Understanding the customer's technology and process and becoming the subject matter expert in the equipment/system.
Providing project technical clarity by defining system requirements and validating system capability.
Being the technical leader on the system from cradle to launch, guiding the design team in ensuring project technical requirements are met. You will support technical execution of the project, contribute to risk mitigation, and drive improvements in quality, cost, and delivery.

Specific Responsibilities

Subject Matter Expertise

Learn the customer process and become the local expert in it, to support the design, integration, and verification of the machines/tools/systems.
Prepare component and system level analysis, calculations, or studies including but not limited to:
 Structural integrity
 Functional capability, drive sizing - speeds, strokes, loads, etc.
 Accuracy, Gauge R&R
 Pressure/flow/heat transfer
 Compliance with applicable codes and standards.
Prepare (or assist in preparation of) technical project documents such as Failure Modes and Effects Analyses and Safety Risk Assessments, ALARA reports, installation/commissioning plans, operating sequence/flowcharts, execution storyboards, operating and maintenance manuals, etc.

Requirements Definition and Verification

Assist in compiling and documenting design requirements, technical/functional specifications, etc.
Learn, understand and flow down customer and industry requirements, including applicable codes and standards, to ensure overall machine compliance.
Prepare vendor technical specifications and interface with vendors of process critical third party equipment, including acceptance testing and buy-off of equipment at vendor site.
Using tools such as a Verification Matrix, plan for verification of all design/system requirements.
Lead (or support) requirements verification by evaluating engineering drawings and specifications for conformance to design inputs/requirements, performing analysis (calculations, simulations, etc.) and testing (POP testing, design validation testing, factory acceptance testing, site acceptance testing).
Lead (or support) planning of Acceptance Testing, including preparation of test plans, ensuring availability of mock-ups, fixtures, test support equipment, etc., and performing test execution with the customer.

Project Technical Leadership

Be (or support) the project technical lead in Design Plan preparation, understand responsibilities for implementation, and perform design related activities in accordance with the Design Plan.
Perform (or assist in) problem solving and coordination of project engineering work.
Provide project support during system startup, integration and buy-off.
Lead (or participate in) design reviews with customers, vendors, and internal design groups.
Lead (or participate in) project technical risk mitigation activities during design stage, preparing CTRAs (concept technical risk assessments), and performing POP (proof of principle) testing.
Manage (or support the technical lead in managing) project technical risk throughout the project: highlight high risk areas and create mitigation plans to reduce risk.
Work with ‘process critical’ third party equipment vendors to ensure compliance with requirements and adherence to budget and schedule.

Additional Responsibilities

Assist in activities for product improvements or first-of-a-kind innovations.
Recognize the onset of technical problems in various disciplines and support development of solutions.
Coordinate the collection and dissemination of technical information within the company and with the customer.
Participate in customer meetings and resolve engineering and customer/project management issues.
Learn and comply with applicable codes and standards, accepted engineering practices, and ATS standards.
Follow engineering processes and provide feedback to assist in continuous improvement initiatives, including development of standards and procedures.
Support development of design concepts and labour hours estimates for quote preparation.
Strictly follow CSA N299/B51/N285/NQA Quality requirements as defined within the ATS QA manuals and procedures.
Willing to work as a Nuclear Energy Worker (NEW), and work in radioactive environments including nuclear site work.

Qualifications

Education:

A post-secondary degree in Mechanical, Mechatronics, Systems Design, Electrical, or Computer Engineering, Engineering Physics, Engineering Science, or equivalent.

Experience:

A thorough understanding of machine design and build, and structured problem solving.
Competent in mechanical CAD software (SolidWorks preferred) with a working knowledge of common machine shop techniques.
Prior experience in mechanical, electrical, controls or systems engineering support, preferably in an automation environment and with customer interaction is an asset.
Experience in nuclear tooling/equipment development is an asset.
Excellent communication skills and ability to lead or work as part of a multi-disciplinary project team.

Why should you join ATS Industrial Automation?

Be a part of an engaged, empowered and innovative global workforce
We offer a robust total rewards package- Competitive starting salaries, comprehensive health and dental benefits, overtime pay, employee bonus, RSP matching, Employee Share Purchase Program
We provide awesome work perks such as treat days, gourmet coffee and beverages, subsidized breakfast and lunches in our cafeteria, employee referral bonuses and lots more.
We are intentional about your professional growth and development through internal career opportunities and our educational reimbursement program.

The Compensation offered will be based on the local job market and may vary depending on factors such as the job-related knowledge, skills, experience of the selected candidate, as well as other objective business considerations. Subject to these considerations, the total compensation package for this position may also include other elements, such as an annual cash incentive in addition to a full range of medical, retirement, and/or other benefits. Details of these benefit plans will be provided when the selected job candidate receives an offer of employment.

This role represents an existing vacancy within the organization.

ATS is in compliance with the Accessibility for Ontarians with Disability Act (AODA), 2005 and will, upon request, assist those who may require specific accommodations due to personal disability. We would ask those who require assistance to notify our offices as soon as possible if accommodation is necessary.

The ATS applicant tracking system may utilize AI software with pre‑defined, rule‑based filters to organize and manage application materials. Rule‑based filters operate solely on fixed criteria and do not perform autonomous evaluation or generate independent recommendations. All hiring decisions continue to involve human review and judgment.

If you're excited about this role, but do not meet all the qualifications listed above, you are still encouraged to apply.

Apply About employer

More about this job

Responsibilities

The Systems Designer is responsible for overseeing systems engineering activities and acting as the technical lead for projects from design to launch. They will collaborate with customers and internal teams to define requirements, mitigate technical risks, and ensure project compliance with industry standards.

Requirements

Candidates must hold a post-secondary degree in Engineering such as Mechanical, Mechatronics, or Systems Design. A thorough understanding of machine design, structured problem solving, and proficiency in mechanical CAD software like SolidWorks is required.

Skills

Systems engineering
Machine design
SolidWorks
Mechanical CAD
Technical documentation
Risk mitigation
Project leadership
Problem solving
Requirements verification
Nuclear safety standards
Automation solutions
Vendor management
Structural integrity analysis
Failure modes and effects analysis
Safety risk assessments
Acceptance testing

Benefits

Annual incentive bonus
Stock purchase plan
3 weeks vacation
Health care benefits
Health care spending account
Employee engagement events
Employee development programs
Educational reimbursement program
Overtime pay
RSP matching
Employee share purchase program

Visa sponsorship

Not detected in the job text

Keywords

Automation
Systems Design
Nuclear
SolidWorks
CAD
Mechanical Engineering
Mechatronics
Electrical Engineering
Computer Engineering
Engineering Physics
FMEA
Risk Assessment
ALARA
CSA N299
B51
N285
NQA
Factory Acceptance Testing
Site Acceptance Testing
Project Management
Technical Leadership
Machine Shop Techniques
Verification Matrix
Process Engineering
System Integration
Quality Assurance
Design Reviews
Proof of Principle
Nuclear Energy Worker
Industrial Automation

Report this job