Find work in Canada.

329,916 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Save this search

Added 4 hours ago
Merchandising Associate: Part Time - DUNCAN
The Home Depot Canada
Duncan, BC
Part-time
Reports to Merchandising Execution Supervisor (MEAS)
Added 4 hours ago
Pipe Layer
Municipal Group of Companies
St. John's, NL · Greater St. John's Metropolitan Area
Full-time
Under the direction of the Pipe Foreman, the Pipe Layer is responsible for the skilled installation and maintenance of sewer and water mains, and related appurtenances. The position will…
Added 4 hours ago
Senior Systems Engineer
ATS Industrial Automation
Cambridge, ON
Full-time
…Effects Analyses and Safety Risk Assessments, ALARA reports, installation/commissioning plans, operating sequence/flowcharts, execution storyboards, operating and maintenance manuals,…
Added 5 hours ago
Plumber
Manufacturing Job Site
Guelph, ON
Internship
Under the direction of the Facilities Supervisor, the Plumber inspects, installs, repairs and replaces pipes, fitting and plumbing fixtures to maintain the heating, water and drainage…
Added 7 hours ago
Senior Systems Engineer
ATS Automation
Cambridge, ON
…Effects Analyses and Safety Risk Assessments, ALARA reports, installation/commissioning plans, operating sequence/flowcharts, execution storyboards, operating and maintenance manuals,…
Added 7 hours ago
Supervisor, Corporate Security
Town of Whitby
Whitby, ON
Full-time
Reporting to the Senior Manager, Security & Enforcement Services, the Supervisor of Corporate Security is responsible for the management and administration of the security operations for…
Added 7 hours ago
Future Opportunities - Journeyperson Industrial or Heavy Duty Mechanic
Nutrien
Lanigan, SK
Full-time
Added 7 hours ago
Future Opportunities - Journeyperson Industrial Mechanic
Nutrien
Lanigan, SK
Full-time
Added 7 hours ago
Supervisor, Maintenance (CAN)
Serta Simmons Bedding, LLC
AB · Calgary, AB
 Oversee installation, maintenance, repair, troubleshooting and inspection of equipment and tools to ensure optimal performance
Added 8 hours ago
Mechanic, Industrial
SSR Mining Inc.
Saskatoon, SK
Full-time
Reporting to either the Supervisor, Maintenance Operations, the Mechanic, Industrial, will install, maintain, dismantle, and overhaul machinery, such as heavy mechanical equipment, conveyor…
Added 9 hours ago
Commissioning Technician - HVAC
Kent
Fort MacKay, AB
Full-time
Verify installation completeness and readiness against HVAC drawings, control schematics, equipment schedules, data sheets, vendor manuals, and approved acceptance criteria.
Added 9 hours ago
Commissioning Technician - Electrical
Kent
Fort MacKay, AB
Full-time
Verify installation completeness and system readiness against drawings, specifications, inspection records, punch lists, and approved acceptance criteria.
Added 9 hours ago
Commissioning Technician - Instrumentation
Kent
Fort MacKay, AB
Full-time
Verify installation completeness and readiness against piping and instrumentation diagrams, loop drawings, hook-up drawings, instrument indexes, data sheets, cause-and-effect matrices, and…
Added 9 hours ago
Assembly Technician – Afternoon Shift
Collins Aerospace
Oakville, ON
Full-time
Collins Aerospace is looking to hire Assembly Technician who will be reporting to the Assembly Supervisor on the afternoon shift. As Assembly Technician, you will be responsible for…
Added 10 hours ago
mechanical maintenance supervisor
Lubecore International Inc.
Acheson, AB
Full-time
Added 10 hours ago
Ceiling Containment Systems (CCS) Supervisor
Nusens
Toronto, ON
Full-time
The Ceiling Containment Systems (CCS) Supervisor is a specialized and highly technical supervisory role responsible for overseeing the installation, coordination, and performance of…
Added 10 hours ago
Supervisor, Elevating Devices (13639)
Toronto Transit Commission (TTC)
Toronto, ON · Greater Toronto Area, Canada
$115,570 to $144,526 CAD / year
Full-time
Looking for a new and exciting job opportunity? We are looking for a Supervisor, Elevating Devices to join our team!
Added 10 hours ago
Technical Services Coordinator
Denison Mines Corp.
Saskatoon, SK
Full-time
…oversee contractors involved in testing, construction, and installation activities and support the Technical Services team with the interpretation, understanding, and modelling of…
Added 10 hours ago
Technical Services Coordinator
Denison Mines
Saskatoon, SK
…oversee contractors involved in testing, construction, and installation activities and support the Technical Services team with the interpretation, understanding, and modelling of…
Added 12 hours ago
Assembly Technician – Afternoon Shift
RTX
Oakville, ON
Full-time
Collins Aerospace is looking to hire Assembly Technician who will be reporting to the Assembly Supervisor on the afternoon shift. As Assembly Technician, you will be responsible for…
Added 12 hours ago
Merchandising Associate Part Time - LONDON S
The Home Depot Canada
London, ON
Part-time
Reports to Merchandising Execution Supervisor (MEAS)
Added 13 hours ago
Lab Technician, Electrical (Regular Part-time)
Centennial College
Toronto, ON · Scarborough, ON
$30.06 to $37.77 CAD / hour
Part-time
Refers complex technical issues to the supervisor or external service providers when required.
Added 13 hours ago
Electrical Supervisor
OCS
Surrey, BC
Full-time
To support & managed with the PM the electrical installation and to ensure the SOR and associated drawings are followed.
Added 13 hours ago
Approved Electrician - Data Centres
OCS
Surrey, BC
Full-time
…to work on their own proficiently and carry out electrical installation work without immediate supervision in the most efficient and economical…
Added 13 hours ago
Parts Clerk
Samuel, Son & Co.
Concord, ON
Full-time
Daily consolidation of UPS/FEDEX/DHL reports to verify that all tracking numbers align, providing comprehensive reports to supervisor.

ATS Automation

Senior Systems Engineer

Cambridge, ON, N3H 4R7, Canada

Pay: Pay Rate: $48.07 - 66.00
Posting language: English
Posted: Sep 21, 2026

Apply About employer

Applications open in a new tab.

Original job description

Total Compensation & Benefits

Pay Rate: $48.07 - 66.00
Eligible for Annual Incentive Bonus
Stock Purchase Plan
3 Weeks Vacation
Health Care Benefits + $600 Health Care Spending Account
Employee Engagement Events (Employee BBQ’s and lunches, weekly treat day, etc.)
Employee Development Programs

Job Description

MAJOR DUTIES:

As a Senior Systems Engineer - Nuclear you are the driving technical force behind problem solving efforts. You will work with the customer, ATS project manager, and ATS design, assembly, and software teams to design the solutions that meet the customer's requirements. You will get the opportunity to thrive as a technical leader by wearing the 3 hats: 1) understanding the customer's technology and process and becoming the subject matter expert in the equipment/system, 2) providing project technical clarity by defining system requirements and validating system capability, and 3) being the technical leader on the system from cradle to launch, guiding the design teams, managing technical risk, and driving improvements in quality, cost, and delivery. Your ability to design, create, execute, solve problems and work as a team will drive the team’s success.

SPECIFIC RESPONSIBILITIES:

Subject Matter Expertise
- Learn the customer process and become the local expert in it, to support the design, fabrication, integration, testing, and commissioning of machines/tools/systems.
- Take engineering responsibility for component and system level analysis, calculations, or studies to verify:
  - Structural integrity,
  - Ability to meet functional requirements (forces, strokes, speeds, pressure/flow, accuracy/repeatability, cycle times, reliability/service life, etc.),
  - Design and operating conditions (pressure, temperature, radiation, seismic, etc.),
  - Compliance with applicable codes and standards.
- Prepare/review technical project documents such as Failure Modes and Effects Analyses and Safety Risk Assessments, ALARA reports, installation/commissioning plans, operating sequence/flowcharts, execution storyboards, operating and maintenance manuals, etc.

Requirements Definition and Verification
- Responsible for ensuring design requirements are appropriately documented.
- Learn, understand and flow down customer and industry requirements, including applicable codes and standards, to ensure overall machine compliance.
- Prepare/review vendor technical specifications and interface with vendors of process critical third party equipment, including acceptance testing and buy-off of equipment at vendor site.
- Using tools such as a Verification Matrix, plan for verification of all design/system requirements.
- Responsible for requirements verification by evaluating engineering drawings and specifications for conformance to design inputs/requirements, performing analysis (calculations, simulations, etc.) and testing (POP testing, design validation testing, factory acceptance testing, site acceptance testing, etc.).
- Responsible for planning of Acceptance Testing, including preparation of test plans, ensuring availability of resources, mock-ups, fixtures, test support equipment, etc., and leading test execution with the customer.

Job Description

Project Technical Leadership
- Responsible for planning, execution, and monitoring of systems design and development.
- Responsible for Design Plan preparation, defining responsibilities for implementation, and updating the plans as design evolves or to capture progress of project execution.
- Lead and participate in design reviews with customers, vendors and internal design groups.
- Responsible for identifying and mitigating technical risk during design phase, starting with CTRAs (concept technical risk assessments) – identify high risk system elements and design assumptions, and provide risk mitigation strategies, including analysis, POP (proof of principle) testing, consulting with external subject matter experts, etc.
- Manage project technical risk throughout the project lifecycle: highlight high risk areas and create mitigation plans to reduce risk.
- Manage and monitor ‘process critical’ third party equipment vendors to ensure compliance with requirements and adherence to budget and schedule.

Additional Responsibilities:

Responsible for communicating time estimates and resource requirements on tasks to the Department Manager and the Project Manager
Ensure compliance with applicable codes and standards, accepted engineering practices, and ATS standards.
Assist in department Continuous Improvement initiatives, including development of standards and procedures.
Take engineering responsibility for own work and for others when required as defined by PEO guidelines.
Assist in the supervision and mentoring of junior staff within the department.
Develop and verify design concepts and labour hours estimates for quote preparation.
Provide design support related to construction of CSA B51 and CSA N285.0 pressure boundary components within the ATS Certificate of Authorization as required.
Strictly follow CSA N299/B51/N285/NQA Quality requirements as defined within the appropriate ATS QA manuals and procedures.
Willing to work as a Nuclear Energy Worker (NEW), and work in radioactive environments including nuclear site work.
Ensure that all business activities are performed with the highest ethical standards and in compliance with the ATS Code of Business Conduct.
Perform other specific duties or projects, as assigned.

HEALTH AND SAFETY REQUIREMENTS

All employees have the responsibility to work in a healthy and safe manner, report any health, safety or environmental concern to their manager or supervisor in a timely manner, and participate in the safety culture of the organization.

Employee responsibilities for Health, Safety and Environment include:

Work in conformance with divisional health, safety and environmental procedures and compliance with legislative requirements.
Refrain from removing or altering safety devices or guarding unless hazardous energies are controlled through lockout-tagout methods.
Report any unsafe conditions or unsafe acts, defects in any equipment or protective device, and any accidents/incidents to the supervisor.
Ensure that the required protective equipment is used for assigned tasks.
Attend all required health, safety and environmental training.
Assist in investigating accidents/incidents where applicable.
Refrain from engaging in any prank, contest, feat of strength, unnecessary running or rough and boisterous conduct.

Qualifications

QUALIFICATIONS:

Education:

A post-secondary degree in Mechanical, Mechatronics, Systems Design, Electrical, or Computer Engineering, Engineering Physics, Engineering Science, or equivalent.
A Licensed Professional Engineer designation in Ontario (P.Eng.) is preferred.

Experience:

Ten years of experience in engineering design, development and qualification of custom machinery, systems or equipment.
Five years of experience in nuclear tooling and equipment development and testing, preferably including field support and experience.
Thorough understanding of machine design and build, machine controls, structured problem solving, statistical analysis, and precision engineering principles.
Good written and oral communication skills and ability to lead or work as part of a multi-disciplinary project team.

Apply About employer

More about this job

Responsibilities

The Senior Systems Engineer acts as the technical lead for nuclear projects, overseeing the design, fabrication, and commissioning of complex systems. They are responsible for managing technical risks, ensuring compliance with industry standards, and mentoring junior staff.

Requirements

Candidates must hold a post-secondary degree in engineering and possess at least ten years of experience in custom machinery development. Five years of specific experience in nuclear tooling and equipment testing is required, with a P.Eng. designation preferred.

Skills

Systems engineering
Nuclear tooling
Machine design
Project technical leadership
Risk assessment
Failure modes and effects analysis
Requirements verification
Statistical analysis
Precision engineering
Technical documentation
Vendor management
Mentoring
Quality assurance
Structural integrity analysis
Commissioning

Benefits

Annual incentive bonus
Stock purchase plan
3 weeks vacation
Health care benefits
Health care spending account
Employee engagement events
Employee development programs

Visa sponsorship

Not detected in the job text

Keywords

Systems Engineering
Nuclear
Mechanical Engineering
Mechatronics
Electrical Engineering
Computer Engineering
Engineering Physics
P.Eng
Machine Design
Machine Controls
Statistical Analysis
Precision Engineering
FMEA
Safety Risk Assessment
ALARA
CSA B51
CSA N285.0
CSA N299
Factory Acceptance Testing
Site Acceptance Testing
Nuclear Energy Worker
Project Management
Technical Leadership
Quality Assurance
Vendor Specifications
Verification Matrix
Structural Integrity
Commissioning
Custom Machinery
Risk Mitigation

Report this job