Find work in Canada.

328,218 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Save this search

Added 8 hours ago
Prototype Assembler 3P - 2nd shift
Rockwell Automation
Cambridge, ON · Canada Cambridge (Dundas)
Full-time
This role is for a Prototype Assembler 3. This is a full-time position on 2nd shift. You will report to the production supervisor and work full time onsite in Cambridge, Ontario.
Added 11 hours ago
Senior Systems Engineer
ATS Industrial Automation
Cambridge, ON
Full-time
…work with the customer, ATS project manager, and ATS design, assembly, and software teams to design the solutions that meet the customer's requirements. You will get the opportunity to…
Added 13 hours ago
Senior Systems Engineer
ATS Automation
Cambridge, ON
…work with the customer, ATS project manager, and ATS design, assembly, and software teams to design the solutions that meet the customer's requirements. You will get the opportunity to…
Added 15 hours ago
Prototype Assembler 3P - 2nd shift
Rockwell Automation
Cambridge, ON
Full-time
This role is for a Prototype Assembler 3. This is a full-time position on 2nd shift. You will report to the production supervisor and work full time onsite in Cambridge, Ontario.
Added 16 hours ago
Assembly Technician – Afternoon Shift
Collins Aerospace
Oakville, ON
Full-time
Collins Aerospace is looking to hire Assembly Technician who will be reporting to the Assembly Supervisor on the afternoon shift. As Assembly Technician, you will be responsible for…
Added 16 hours ago
Intern Engineering Support - Victoria Area Office
Texas Department of Transportation
Victoria, BC · Greater Victoria Metropolitan Area
Part-time
…instructions and are subject to frequent review by the immediate…
Added 17 hours ago
Camp Maintenance Coordinator
The Salvation Army in Canada
Saskatoon, SK
Part-time
Maintains all required inventories at approved levels; takes inventory as assigned by supervisor.
Added 18 hours ago
Assembly Technician – Afternoon Shift
RTX
Oakville, ON
Full-time
Collins Aerospace is looking to hire Assembly Technician who will be reporting to the Assembly Supervisor on the afternoon shift. As Assembly Technician, you will be responsible for…
Added 22 hours ago
Camp Maintenance Coordinator
The Salvation Army Canada and Bermuda Territory
Saskatoon, Saskatchewan · Beaver Creek Camp
Part-time
Maintains all required inventories at approved levels; takes inventory as assigned by supervisor.
Added 23 hours ago
Supervisor – Electrical Assembly
Tigercat | MacDonald Steel
Brant, ON
Reporting to the Plant Manager, the Assembly Supervisor is responsible for leading the operations of the afternoon shipping / receiving and assembly department, including Wire Harness and…
Added 1 day ago
Production Associate, CCA Test (3:30 pm – 12:00 midnight)
Curtiss-Wright Corporation
Ottawa, ON · Canada-Ottawa
Full-time
Follow test procedures and work instructions to verify electrical performance
Added 1 day ago
Electrical Designer
Prodomax Automation Ltd.
Barrie, ON
Full-time
You will provide Electrical Design solutions reporting directly to the Electrical Design Supervisor. Your level within the role will be determined by the skills and experience you bring…
Added 1 day ago
Electrician
Prodomax Automation Ltd.
Barrie, ON
Full-time
The Electrician will wire capital and tooling in our automated assembly and welding systems and will report directly to the Electrical Supervisor.
Added 1 day ago
Robotics Technician
Prodomax Automation Ltd.
Barrie, ON
Full-time
…Jenoptik Group, we are renowned for our expertise in welding and assembly systems for structural components in automotive and industrial applications. We pride ourselves on our core values…
Added 1 day ago
Robotics Technician
JENOPTIK AG
Barrie, ON
…environment. This position will report directly to the Robotics Supervisor. Your level within the role will be determined by the skills and experience you bring when taking on this exciting…
Added 5 months ago
Assembler - Mechanical
Savaria Corporation
Brampton, ON
$24 to $24.5 CAD / hour
Reporting to the Production Supervisor and located 100% on site at 2 Walker Drive, Brampton, Ontario, this position is responsible for the assembly of our product “Vuelift” - elevator…
Added 3 days ago
Security Guard - Afternoon Shift
Avl manufacturing
Hamilton, ON
Up to $25 CAD / hour
Founded in 1998, AVL has grown into a North American leader in turnkey engineering, manufacturing, and assembly solutions. For over 25 years, we've combined in-house mechanical, structural,…
Added 4 days ago
Material Handler
Team Power Solutions
Saskatoon, SK
Full-time
…by verifying, decanting, organizing, labeling, and staging electrical components, materials, drawings, Field Installation Work Packages (FIWPs), and related assembly information. This role…
Added 4 days ago
Industrial Millwright
Johnson Electric
Ancaster, ON · Canada - FPS Ancaster (General)
Full-time
…mechanical expertise across mechanical, hydraulic, pneumatic, electrical, and controls systems, while ensuring compliance with safety, quality, and environmental standards. You will reports…
Added 4 days ago
Automation/Controls Supervisor
Magna International
Concord, ON
Full-time
The Automation/Controls Supervisor leads the design, implementation, maintenance, and continuous improvement of automated systems and controls in a high-volume automotive parts assembly…
Added 4 days ago
Commercial Transport Mechanic
Whistler Blackcomb
Whistler, BC
Full-time
Trouble shooting of mechanical and electrical systems on various equipment.
Added 5 days ago
Controls Specialist
JENOPTIK AG
Barrie, ON
…Jenoptik Group, we are renowned for our expertise in welding and assembly systems for structural components in automotive and industrial applications. We pride ourselves on our core values…
Added 5 days ago
Signage Assembler
JD Sign Group
Cambridge, ON
Full-time
Responsible for assembling custom signage to exact specifications, working with electrical and mechanical components, and ensuring the highest quality and safety standards.
Added 6 days ago
Commercial Transport Mechanic
Vail Resorts
Whistler, BC
Trouble shooting of mechanical and electrical systems on various equipment.
Added 4 days ago
Aircraft Maintenance Engineer, Avionics
Voyageur Aviation
North Bay, ON · Toronto, ON
Full-time
As a key member of the Avionics team, the Aircraft Maintenance Engineer (AME) will report to Supervisor, Avionics, and will be responsible for maintaining, repairing, overhauling,…

ATS Automation

Senior Systems Engineer

Cambridge, ON, N3H 4R7, Canada

Pay: Pay Rate: $48.07 - 66.00
Posting language: English
Posted: Sep 21, 2026

Apply About employer

Applications open in a new tab.

Original job description

Total Compensation & Benefits

Pay Rate: $48.07 - 66.00
Eligible for Annual Incentive Bonus
Stock Purchase Plan
3 Weeks Vacation
Health Care Benefits + $600 Health Care Spending Account
Employee Engagement Events (Employee BBQ’s and lunches, weekly treat day, etc.)
Employee Development Programs

Job Description

MAJOR DUTIES:

As a Senior Systems Engineer - Nuclear you are the driving technical force behind problem solving efforts. You will work with the customer, ATS project manager, and ATS design, assembly, and software teams to design the solutions that meet the customer's requirements. You will get the opportunity to thrive as a technical leader by wearing the 3 hats: 1) understanding the customer's technology and process and becoming the subject matter expert in the equipment/system, 2) providing project technical clarity by defining system requirements and validating system capability, and 3) being the technical leader on the system from cradle to launch, guiding the design teams, managing technical risk, and driving improvements in quality, cost, and delivery. Your ability to design, create, execute, solve problems and work as a team will drive the team’s success.

SPECIFIC RESPONSIBILITIES:

Subject Matter Expertise
- Learn the customer process and become the local expert in it, to support the design, fabrication, integration, testing, and commissioning of machines/tools/systems.
- Take engineering responsibility for component and system level analysis, calculations, or studies to verify:
  - Structural integrity,
  - Ability to meet functional requirements (forces, strokes, speeds, pressure/flow, accuracy/repeatability, cycle times, reliability/service life, etc.),
  - Design and operating conditions (pressure, temperature, radiation, seismic, etc.),
  - Compliance with applicable codes and standards.
- Prepare/review technical project documents such as Failure Modes and Effects Analyses and Safety Risk Assessments, ALARA reports, installation/commissioning plans, operating sequence/flowcharts, execution storyboards, operating and maintenance manuals, etc.

Requirements Definition and Verification
- Responsible for ensuring design requirements are appropriately documented.
- Learn, understand and flow down customer and industry requirements, including applicable codes and standards, to ensure overall machine compliance.
- Prepare/review vendor technical specifications and interface with vendors of process critical third party equipment, including acceptance testing and buy-off of equipment at vendor site.
- Using tools such as a Verification Matrix, plan for verification of all design/system requirements.
- Responsible for requirements verification by evaluating engineering drawings and specifications for conformance to design inputs/requirements, performing analysis (calculations, simulations, etc.) and testing (POP testing, design validation testing, factory acceptance testing, site acceptance testing, etc.).
- Responsible for planning of Acceptance Testing, including preparation of test plans, ensuring availability of resources, mock-ups, fixtures, test support equipment, etc., and leading test execution with the customer.

Job Description

Project Technical Leadership
- Responsible for planning, execution, and monitoring of systems design and development.
- Responsible for Design Plan preparation, defining responsibilities for implementation, and updating the plans as design evolves or to capture progress of project execution.
- Lead and participate in design reviews with customers, vendors and internal design groups.
- Responsible for identifying and mitigating technical risk during design phase, starting with CTRAs (concept technical risk assessments) – identify high risk system elements and design assumptions, and provide risk mitigation strategies, including analysis, POP (proof of principle) testing, consulting with external subject matter experts, etc.
- Manage project technical risk throughout the project lifecycle: highlight high risk areas and create mitigation plans to reduce risk.
- Manage and monitor ‘process critical’ third party equipment vendors to ensure compliance with requirements and adherence to budget and schedule.

Additional Responsibilities:

Responsible for communicating time estimates and resource requirements on tasks to the Department Manager and the Project Manager
Ensure compliance with applicable codes and standards, accepted engineering practices, and ATS standards.
Assist in department Continuous Improvement initiatives, including development of standards and procedures.
Take engineering responsibility for own work and for others when required as defined by PEO guidelines.
Assist in the supervision and mentoring of junior staff within the department.
Develop and verify design concepts and labour hours estimates for quote preparation.
Provide design support related to construction of CSA B51 and CSA N285.0 pressure boundary components within the ATS Certificate of Authorization as required.
Strictly follow CSA N299/B51/N285/NQA Quality requirements as defined within the appropriate ATS QA manuals and procedures.
Willing to work as a Nuclear Energy Worker (NEW), and work in radioactive environments including nuclear site work.
Ensure that all business activities are performed with the highest ethical standards and in compliance with the ATS Code of Business Conduct.
Perform other specific duties or projects, as assigned.

HEALTH AND SAFETY REQUIREMENTS

All employees have the responsibility to work in a healthy and safe manner, report any health, safety or environmental concern to their manager or supervisor in a timely manner, and participate in the safety culture of the organization.

Employee responsibilities for Health, Safety and Environment include:

Work in conformance with divisional health, safety and environmental procedures and compliance with legislative requirements.
Refrain from removing or altering safety devices or guarding unless hazardous energies are controlled through lockout-tagout methods.
Report any unsafe conditions or unsafe acts, defects in any equipment or protective device, and any accidents/incidents to the supervisor.
Ensure that the required protective equipment is used for assigned tasks.
Attend all required health, safety and environmental training.
Assist in investigating accidents/incidents where applicable.
Refrain from engaging in any prank, contest, feat of strength, unnecessary running or rough and boisterous conduct.

Qualifications

QUALIFICATIONS:

Education:

A post-secondary degree in Mechanical, Mechatronics, Systems Design, Electrical, or Computer Engineering, Engineering Physics, Engineering Science, or equivalent.
A Licensed Professional Engineer designation in Ontario (P.Eng.) is preferred.

Experience:

Ten years of experience in engineering design, development and qualification of custom machinery, systems or equipment.
Five years of experience in nuclear tooling and equipment development and testing, preferably including field support and experience.
Thorough understanding of machine design and build, machine controls, structured problem solving, statistical analysis, and precision engineering principles.
Good written and oral communication skills and ability to lead or work as part of a multi-disciplinary project team.

Apply About employer

More about this job

Responsibilities

The Senior Systems Engineer acts as the technical lead for nuclear projects, overseeing the design, fabrication, and commissioning of complex systems. They are responsible for managing technical risks, ensuring compliance with industry standards, and mentoring junior staff.

Requirements

Candidates must hold a post-secondary degree in engineering and possess at least ten years of experience in custom machinery development. Five years of specific experience in nuclear tooling and equipment testing is required, with a P.Eng. designation preferred.

Skills

Systems engineering
Nuclear tooling
Machine design
Project technical leadership
Risk assessment
Failure modes and effects analysis
Requirements verification
Statistical analysis
Precision engineering
Technical documentation
Vendor management
Mentoring
Quality assurance
Structural integrity analysis
Commissioning

Benefits

Annual incentive bonus
Stock purchase plan
3 weeks vacation
Health care benefits
Health care spending account
Employee engagement events
Employee development programs

Visa sponsorship

Not detected in the job text

Keywords

Systems Engineering
Nuclear
Mechanical Engineering
Mechatronics
Electrical Engineering
Computer Engineering
Engineering Physics
P.Eng
Machine Design
Machine Controls
Statistical Analysis
Precision Engineering
FMEA
Safety Risk Assessment
ALARA
CSA B51
CSA N285.0
CSA N299
Factory Acceptance Testing
Site Acceptance Testing
Nuclear Energy Worker
Project Management
Technical Leadership
Quality Assurance
Vendor Specifications
Verification Matrix
Structural Integrity
Commissioning
Custom Machinery
Risk Mitigation

Report this job