Find work in Canada.

487,793 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 10 hours ago
SM
RQ11743 – Systems Testing/QA Specialist – Senior
S M Software Solutions Inc
Toronto, ON
- Internship
…extensive experience in end-to-end testing, quality assurance, test automation, defect management, and release-readiness assessment for complex digital solutions and enterprise platforms.…
Added 10 hours ago
SM
RQ11742 – Systems Testing/QA Specialist – Senior
S M Software Solutions Inc
Toronto, ON
- Internship
…and user acceptance testing, along with experience in test automation, defect management, requirements traceability, and quality reporting. The successful candidate will coordinate with…
Added 10 hours ago
SM
RQ11743 – Systems Testing/QA Specialist – Senior
S M Software Solutions Inc
Toronto, ON
- Internship
…extensive experience in end-to-end testing, quality assurance, test automation, defect management, and release-readiness assessment for complex digital solutions and enterprise platforms.…
Added 10 hours ago
SM
RQ11742 – Systems Testing/QA Specialist – Senior
S M Software Solutions Inc
Toronto, ON
- Internship
…and user acceptance testing, along with experience in test automation, defect management, requirements traceability, and quality reporting. The successful candidate will coordinate with…
Added 13 hours ago
MC
Senior QA Engineer III – Automation | Banking | API | Kafka | ETL (35729)
Myticas Consulting
Ottawa, ON
- Full-time
Senior QA Engineer III – Automation | Banking | API | Kafka | ETL
Added 13 hours ago
MC
Technical Consultant III (35732)
Myticas Consulting
Toronto, ON
- Full-time
Technical Consultant III (Software Engineer, Senior/Lead)
Added 17 hours ago
SM
RQ11742 – Systems Testing/QA Specialist – Senior
S M Software Solutions Inc
Toronto, ON
- Internship
…and user acceptance testing, along with experience in test automation, defect management, requirements traceability, and quality reporting. The successful candidate will coordinate with…
Added 17 hours ago
SM
RQ11743 – Systems Testing/QA Specialist – Senior
S M Software Solutions Inc
Toronto, ON
- Internship
…extensive experience in end-to-end testing, quality assurance, test automation, defect management, and release-readiness assessment for complex digital solutions and enterprise platforms.…
Added 19 hours ago
IE
Analyst, Business
IMAX Enhanced | Streaming & Consumer Technology
Mississauga, ON
- Full-time
Lead discovery and requirements-gathering sessions with business and technology stakeholders.
Added 20 hours ago
A
Test Automation Lead
Accenture
Mississauga, ON
- Full-time
…test strategies for batch and online processing, drive test automation where possible, and validate that financial and regulatory outcomes are…
Added 1 day ago
Analyste de test technique principal·e I Technical Test Lead
2K Vegas
Montreal, QC
Added 1 day ago
L
Software Development Manager
LawDepot
Remote, Canada
- Full-time
- Remote
Lead software developers, shape technical direction, and turn business goals into reliable software delivery.
Added 1 day ago
SM
RQ11743 – Systems Testing/QA Specialist – Senior
S M Software Solutions Inc
Toronto, ON
- Internship
…extensive experience in end-to-end testing, quality assurance, test automation, defect management, and release-readiness assessment for complex digital solutions and enterprise platforms.…
Added 1 day ago
SM
RQ11742 – Systems Testing/QA Specialist – Senior
S M Software Solutions Inc
Toronto, ON
- Internship
…and user acceptance testing, along with experience in test automation, defect management, requirements traceability, and quality reporting. The successful candidate will coordinate with…
Added 1 day ago
N
Marketing Engineer & Director of AEO
Notified
Toronto, ON
- Full-time
Lead, coach, and manage a team of web managers and developers, ensuring clear priorities, execution excellence, and ongoing professional development.
Added 2 days ago
IE
Analyst, Business
IMAX Enhanced | Streaming & Consumer Technology
Mississauga, ON
- Full-time
Lead discovery and requirements-gathering sessions with business and technology stakeholders.
Added 2 days ago
LI
Senior Systems Testing/QA Specialist
Lotus IT Solutions
Toronto, ON
- Contract
…Procurement) is seeking a Senior Systems Testing/QA Specialist to lead and perform quality assurance and testing activities for a complex enterprise platform. The successful consultant will…
Added 2 days ago
P
DevOps Engineer
Pillway
Brampton, ON
- Full-time
…PIPEDA, SOC 2). If you have a passion for cloud security, CI/CD automation, and enabling secure development in a fast-paced environment, this is your next…
Added 2 days ago
CL
Technical Product Manager
Charger Logistics Inc.
Brampton, ON
- Full-time
…business process improvement, product development, and AI-enabled automation initiatives. This role will bridge business stakeholders and technology teams, translating complex business…
Added 2 days ago
JG
Functional Testing
J&M Group
Mississauga, ON
- Contract
We are looking for an experienced Functional Testing Lead to manage QA teams and ensure high-quality software delivery.
Added 2 days ago
NC
Lead Business Analyst
National Consultants Professionals Ltd
Toronto, ON · Etobicoke, ON
- $70,000 to $80,000 CAD / year
- Full-time
Document current-state and future-state processes and identify opportunities for automation and optimization.
Added 2 days ago
A
Intermediate Civil Designer / Technologist
Arcadis
Toronto, ON
- Full-time
This role is intended for a highly capable Civil 3D professional who can independently lead the design production of land development projects while mentoring junior staff and developing…
Added 2 days ago
Business Analyst
Sunwing Vacations Group
Toronto, ON
…our Information Technology team in Toronto. Reporting to the Lead Business Analyst, you will work within one or more Product streams, partnering with business and technology stakeholders to…
Added 2 days ago
F
Manager, Product Support
Float
Remote, Canada
- $100,000 to $125,000 CAD / year
- Full-time
- Remote
Lead our AI-first approach to support. Identify, pilot, and roll out automation and AI assistants that improve quality and efficiency without compromising the customer experience.
Added 2 days ago
B
Intern, Digital Innovation Office - Business Analyst ( Winter 2027)
Bombardier
Dorval, QC
- Volunteer
Working closely with the QA Lead, developers, product team, and UX/UI team, you will test new features, identify issues, document results, and contribute to the continuous improvement of…

ATS Industrial Automation

Senior Systems Engineer

Cambridge, ON, Canada

Pay Rate: $48.07 - 66.00 · Full-time

Apply About employer

Applications open in a new tab.

Job details

Pay: Pay Rate: $48.07 - 66.00
Job type: Full-time
Posting language: English
Posted: Sep 21, 2026

Original job description

Total Compensation & Benefits

Pay Rate: $48.07 - 66.00
Eligible for Annual Incentive Bonus
Stock Purchase Plan
3 Weeks Vacation
Health Care Benefits + $600 Health Care Spending Account
Employee Engagement Events (Employee BBQ’s and lunches, weekly treat day, etc.)
Employee Development Programs

Job Description

MAJOR DUTIES:

As a Senior Systems Engineer - Nuclear you are the driving technical force behind problem solving efforts. You will work with the customer, ATS project manager, and ATS design, assembly, and software teams to design the solutions that meet the customer's requirements. You will get the opportunity to thrive as a technical leader by wearing the 3 hats: 1) understanding the customer's technology and process and becoming the subject matter expert in the equipment/system, 2) providing project technical clarity by defining system requirements and validating system capability, and 3) being the technical leader on the system from cradle to launch, guiding the design teams, managing technical risk, and driving improvements in quality, cost, and delivery. Your ability to design, create, execute, solve problems and work as a team will drive the team’s success.

SPECIFIC RESPONSIBILITIES:

Subject Matter Expertise
- Learn the customer process and become the local expert in it, to support the design, fabrication, integration, testing, and commissioning of machines/tools/systems.
- Take engineering responsibility for component and system level analysis, calculations, or studies to verify:
- - Structural integrity,
  - Ability to meet functional requirements (forces, strokes, speeds, pressure/flow, accuracy/repeatability, cycle times, reliability/service life, etc.),
  - Design and operating conditions (pressure, temperature, radiation, seismic, etc.),
  - Compliance with applicable codes and standards.
- Prepare/review technical project documents such as Failure Modes and Effects Analyses and Safety Risk Assessments, ALARA reports, installation/commissioning plans, operating sequence/flowcharts, execution storyboards, operating and maintenance manuals, etc.

Requirements Definition and Verification
- Responsible for ensuring design requirements are appropriately documented.
- Learn, understand and flow down customer and industry requirements, including applicable codes and standards, to ensure overall machine compliance.
- Prepare/review vendor technical specifications and interface with vendors of process critical third party equipment, including acceptance testing and buy-off of equipment at vendor site.
- Using tools such as a Verification Matrix, plan for verification of all design/system requirements.
- Responsible for requirements verification by evaluating engineering drawings and specifications for conformance to design inputs/requirements, performing analysis (calculations, simulations, etc.) and testing (POP testing, design validation testing, factory acceptance testing, site acceptance testing, etc.).
- Responsible for planning of Acceptance Testing, including preparation of test plans, ensuring availability of resources, mock-ups, fixtures, test support equipment, etc., and leading test execution with the customer.

Job Description

Project Technical Leadership
- Responsible for planning, execution, and monitoring of systems design and development.
- Responsible for Design Plan preparation, defining responsibilities for implementation, and updating the plans as design evolves or to capture progress of project execution.
- Lead and participate in design reviews with customers, vendors and internal design groups.
- Responsible for identifying and mitigating technical risk during design phase, starting with CTRAs (concept technical risk assessments) – identify high risk system elements and design assumptions, and provide risk mitigation strategies, including analysis, POP (proof of principle) testing, consulting with external subject matter experts, etc.
- Manage project technical risk throughout the project lifecycle: highlight high risk areas and create mitigation plans to reduce risk.
- Manage and monitor ‘process critical’ third party equipment vendors to ensure compliance with requirements and adherence to budget and schedule.

Additional Responsibilities:

Responsible for communicating time estimates and resource requirements on tasks to the Department Manager and the Project Manager
Ensure compliance with applicable codes and standards, accepted engineering practices, and ATS standards.
Assist in department Continuous Improvement initiatives, including development of standards and procedures.
Take engineering responsibility for own work and for others when required as defined by PEO guidelines.
Assist in the supervision and mentoring of junior staff within the department.
Develop and verify design concepts and labour hours estimates for quote preparation.
Provide design support related to construction of CSA B51 and CSA N285.0 pressure boundary components within the ATS Certificate of Authorization as required.
Strictly follow CSA N299/B51/N285/NQA Quality requirements as defined within the appropriate ATS QA manuals and procedures.
Willing to work as a Nuclear Energy Worker (NEW), and work in radioactive environments including nuclear site work.
Ensure that all business activities are performed with the highest ethical standards and in compliance with the ATS Code of Business Conduct.
Perform other specific duties or projects, as assigned.

Health And Safety Requirements

All employees have the responsibility to work in a healthy and safe manner, report any health, safety or environmental concern to their manager or supervisor in a timely manner, and participate in the safety culture of the organization.

Employee responsibilities for Health, Safety and Environment include:

Work in conformance with divisional health, safety and environmental procedures and compliance with legislative requirements.
Refrain from removing or altering safety devices or guarding unless hazardous energies are controlled through lockout-tagout methods.
Report any unsafe conditions or unsafe acts, defects in any equipment or protective device, and any accidents/incidents to the supervisor.
Ensure that the required protective equipment is used for assigned tasks.
Attend all required health, safety and environmental training.
Assist in investigating accidents/incidents where applicable.
Refrain from engaging in any prank, contest, feat of strength, unnecessary running or rough and boisterous conduct.

Qualifications

QUALIFICATIONS:

Education:

A post-secondary degree in Mechanical, Mechatronics, Systems Design, Electrical, or Computer Engineering, Engineering Physics, Engineering Science, or equivalent.
A Licensed Professional Engineer designation in Ontario (P.Eng.) is preferred.

Experience:

Ten years of experience in engineering design, development and qualification of custom machinery, systems or equipment.
Five years of experience in nuclear tooling and equipment development and testing, preferably including field support and experience.
Thorough understanding of machine design and build, machine controls, structured problem solving, statistical analysis, and precision engineering principles.
Good written and oral communication skills and ability to lead or work as part of a multi-disciplinary project team.

Apply About employer

More about this job

Responsibilities

The Senior Systems Engineer acts as the technical lead for nuclear projects, managing the design, fabrication, and testing of complex systems. They are responsible for defining system requirements, mitigating technical risks, and ensuring compliance with industry codes and standards.

Requirements

Candidates must hold a post-secondary degree in engineering and possess at least ten years of experience in custom machinery design. Five years of specific experience in nuclear tooling and equipment development is required, with a P.Eng. designation preferred.

Skills

Systems engineering
Nuclear tooling
Machine design
Project technical leadership
Risk assessment
Structural integrity analysis
Failure modes and effects analysis
Requirements definition
Acceptance testing
Precision engineering
Statistical analysis
Machine controls
Technical documentation
Mentoring
Quality compliance

Benefits

Annual incentive bonus
Stock purchase plan
3 weeks vacation
Health care benefits
Health care spending account
Employee engagement events
Employee development programs

Visa sponsorship

Not detected in the job text

Keywords

Systems Engineering
Nuclear
Mechanical Engineering
Mechatronics
Electrical Engineering
Computer Engineering
Engineering Physics
P.Eng
Machine Design
FMEA
Safety Risk Assessment
ALARA
CSA B51
CSA N285.0
CSA N299
Factory Acceptance Testing
Site Acceptance Testing
Technical Leadership
Risk Mitigation
Quality Assurance
Automation
Nuclear Energy Worker
Structural Integrity
Precision Engineering
Statistical Analysis

Report this job