Find work in Canada.

552,090 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 1 hour ago
IF
Technicien de maintenance en véhicules lourds diesel
Impact Fulfillment Services
Ottawa, ON · Vanier, ON
- Full-time
Added 1 hour ago
IF
Technicien(ne) débutant(e) – Entretien de véhicules lourds
Impact Fulfillment Services
Ottawa, ON · Vanier, ON
- Full-time
Added 2 hours ago
ES
Maintenance Generalist - Toronto
Equans Services Canada & US
Toronto, ON
- Temporary
Be familiar with all aspects of the building operations including but not limited to HVAC, Mechanical, Electrical, Plumbing, Fire Alarm, (experience in Carpentry, Painting and Drywall,…
Added 5 hours ago
GE
Hotel 1st Cook
Grey Eagle Resort & Casino
Calgary, AB
- Full-time
Under the direction of the Executive Chef, Executive Sous Chef, Sous Chef or Supervisor, the Food Truck Handler / Cook is responsible for the safe operation, transportation, setup, food…
Added 5 hours ago
GE
Event Centre - Food and Beverage Supervisor
Grey Eagle Resort & Casino
Calgary, AB
- Full-time
Under the direction of Food and Beverage Manager; Event Supervisor duties will include, but are limited to oversees all aspects of a events, including set-up, food service, bar service and…
Added 5 hours ago
GE
Conversion Set Up Crew
Grey Eagle Resort & Casino
Calgary, AB
- Full-time
Always ensure a clean and organized storage areas. Report safety issues promptly to supervisor.
Added 14 hours ago
HD Mechanic - Journeyperson
West Coast Reduction Ltd.
Calgary, AB
…and drive train, air brakes, steering, and fuel, hydraulic, electrical, and electronic systems using other hand…
Added 16 hours ago
M&
Jr Weld Technician
Mitchell & Associates
Vaughan, ON
- Full-time
Knowledge of technical specialties and capable of working with moderately complex procedures: electrical troubleshooting of low voltage (<30 V), spot and MIG welding, PLC programming (Allen…
Added 17 hours ago
Production Shift Supervisor
Amrize
Saint-Constant, QC · St-Constant, Queb
Join Amrize as a Production Shift Supervisor and help construct what's next. If you're ready to put your skills to work on projects that matter - and build a career with a company that’s…
Added 17 hours ago
GE
Hotel 1st Cook
Grey Eagle Resort & Casino
Calgary, AB
- Full-time
Under the direction of the Executive Chef, Executive Sous Chef, Sous Chef or Supervisor, the Food Truck Handler / Cook is responsible for the safe operation, transportation, setup, food…
Added 17 hours ago
GE
Event Centre - Food and Beverage Supervisor
Grey Eagle Resort & Casino
Calgary, AB
- Full-time
Under the direction of Food and Beverage Manager; Event Supervisor duties will include, but are limited to oversees all aspects of a events, including set-up, food service, bar service and…
Added 17 hours ago
GE
Conversion Set Up Crew
Grey Eagle Resort & Casino
Calgary, AB
- Full-time
Always ensure a clean and organized storage areas. Report safety issues promptly to supervisor.
Added 18 hours ago
TH
Plumbing and Electrical Sales Associate Part Time - 7038 Brandon
The Home Depot
Brandon, MB
- Part-time
Added 19 hours ago
Q
Power Systems Specialist III
Qualus
Bolton, ON
- Full-time
Perform updates to client electrical drawings including one lines, wiring diagrams, and schematics –with AutoCAD or Bluebeam (PDF Markups).
Added 21 hours ago
Electrician
Regional Municipality of Wood Buffalo
Fort McMurray, AB
Perform corrective and preventative maintenance, repairs, alterations, and installations of various electrical systems, components, and equipment.
Added 21 hours ago
Instrumentation Technician
Regional Municipality of Wood Buffalo
Fort McMurray, AB
Added 22 hours ago
F
Sorter
FluksAqua
AB · Edmonton, AB
- Contract
Advises Lead Hand/ Supervisor when production targets will not be met and provide explanation of shortfalls and actively participate in the development of productivity improvement…
Added 22 hours ago
AC
Laundry Worker
Aramark Canada
Tillsonburg, ON
- Full-time
Ensure linens meet the quality expectations designated by specific customers. Any questions or issues should be referred to the lead or supervisor.
Added 22 hours ago
Assistant Resident Manager
Realstar
Cornwall, ON
Assist the supervisor in HVAC monitoring, troubleshooting minor electrical, plumbing, boiler & chiller maintenance
Added 23 hours ago
TH
Plumbing and Electrical Sales Associate Part Time - 7038 Brandon
The Home Depot Canada
Brandon, MB
- Part-time
Added 1 day ago
ES
Mécanicien(ne) de machines fixes 3A / 3rd Class Stationary Engineer Refrigeration Class A (Québec)
Equans Services Canada & US
Gatineau, QC
- Full-time
As part of the Energy Services Acquisition Program (ESAP) the third-class Plant shift Supervisor, operates, maintain and repairs a wide range of equipment of two 3rd class Central Heating &…
Added 1 day ago
EC
Material Handler
Eaton Corporation
Airdrie, AB
- Full-time
…businesses for over 44 years. Currently, it produces a range of electrical products, for both national and global markets. With our proximity to East Lake and its walking paths, in addition…
Added 1 day ago
V
Construction and Commissioning Lead
Vale
Canada
- Full-time
A minimum of a technical diploma (ie., industrial, electrical, mechanical, civil) is required
Added 1 day ago
CC
Night Supervisor, Maintenance
Coca-Cola Canada Bottling Limited
Brampton, ON
- Full-time
Reporting to the Maintenance Manager, the Maintenance Supervisor will be responsible for the management of the Maintenance department to ensure the eﬃciency of the highest quality product…
Added 1 day ago
B&
Project Coordinator, Refrigeration
Black & McDonald Limited
Stoney Creek, NB
- Full-time
The Project Coordinator is located in our Stoney Creek office and reports directly to the Refrigeration Project Supervisor. Their primary focus is supporting the Refrigeration Projects team…

ATS Industrial Automation

Systems Designer

Cambridge, ON, Canada

Pay Rate: $42.31 - $58.17 · Full-time

Apply About employer

Applications open in a new tab.

Job details

Pay: Pay Rate: $42.31 - $58.17
Job type: Full-time
Apply by: Nov 20, 2026
Experience: 5 years of prior experience in mechanical, electrical, controls or systems engineering support, preferably in an automation environment and with customer interaction is an asset.
Posting language: English
Posted: Oct 21, 2026

Original job description

Job Description

Total Compensation & Benefits

Pay Rate: $42.31 - $58.17
Eligible for Annual Incentive Bonus
Stock Purchase Plan
3 Weeks Vacation
Health Care Benefits + $600 Health Care Spending Account
Employee Engagement Events (Employee BBQ’s and lunches, weekly treat day, etc.)
Employee Development Programs

MAJOR DUTIES:

As a Systems Designer/Engineer - Nuclear you are responsible for learning technical aspects of a project and overseeing systems engineering activities specific to the project. You will work with the customer, ATS project manager, and the ATS design, assembly, and software teams to design the solutions that meet the customer's requirements. You will get the opportunity to develop into a technical leader by taking on the following 3 roles: 1) understanding the customer's technology and process and becoming the subject matter expert in the equipment/system, 2) providing project technical clarity by defining system requirements and validating system capability, and 3) being the technical leader on the system from cradle to launch, guiding the design team in ensuring project technical requirements are met. You will support technical execution of the project, contribute to risk mitigation, and drive improvements in quality, cost, and delivery.

SPECIFIC RESPONSIBILITIES:

Subject Matter Expertise
- Learn the customer process and become the local expert in it, to support the design, integration, and verification of the machines/tools/systems.
- Prepare component and system level analysis, calculations, or studies including but not limited to:
- - Structural integrity
  - Functional capability, drive sizing - speeds, strokes, loads, etc.
  - Accuracy, Gauge R&R
  - Pressure/flow/heat transfer
  - Compliance with applicable codes and standards.
  - Prepare (or assist in preparation of) technical project documents such as Failure Modes and Effects Analyses and Safety Risk Assessments, ALARA reports, installation/commissioning plans, operating sequence/flowcharts, execution storyboards, operating and maintenance manuals, etc.

Requirements Definition and Verification
- Assist in compiling and documenting design requirements, technical/functional specifications, etc.
- Learn, understand and flow down customer and industry requirements, including applicable codes and standards, to ensure overall machine compliance.
- Prepare vendor technical specifications and interface with vendors of process critical third party equipment, including acceptance testing and buy-off of equipment at vendor site.
- Using tools such as a Verification Matrix, plan for verification of all design/system requirements.
- Lead (or support) requirements verification by evaluating engineering drawings and specifications for conformance to design inputs/requirements, performing analysis (calculations, simulations, etc.) and testing (POP testing, design validation testing, factory acceptance testing, site acceptance testing).
- Lead (or support) planning of Acceptance Testing, including preparation of test plans, ensuring availability of mock-ups, fixtures, test support equipment, etc., and performing test execution with the customer.

Additional Information

Project Technical Leadership
- Be (or support) the project technical lead in Design Plan preparation, understand responsibilities for implementation, and perform design related activities in accordance with the Design Plan.
- Perform (or assist in) problem solving and coordination of project engineering work.
- Provide project support during system startup, integration and buy-off.
- Lead (or participate in) design reviews with customers, vendors, and internal design groups
- Lead (or participate in) project technical risk mitigation activities during design stage, preparing CTRAs (concept technical risk assessments), and performing POP (proof of principle) testing.
- Manage (or support the technical lead in managing) project technical risk throughout the project: highlight high risk areas and create mitigation plans to reduce risk.
- Work with ‘process critical’ third party equipment vendors to ensure compliance with requirements and adherence to budget and schedule.

ADDITIONAL RESPONSIBILITIES:

Assist in activities for product improvements or first-of-a-kind innovations.
Recognize the onset of technical problems in various disciplines and support development of solutions.
Coordinate the collection and dissemination of technical information within the company and with the customer.
Participate in customer meetings and resolve engineering and customer/project management issues.
Learn and comply with applicable codes and standards, accepted engineering practices, and ATS standards.
Follow engineering processes and provide feedback to assist in continuous improvement initiatives, including development of standards and procedures.
Support development of design concepts and labour hours estimates for quote preparation.
Strictly follow CSA N299/B51/N285/NQA Quality requirements as defined within the ATS QA manuals and procedures.
Willing to work as a Nuclear Energy Worker (NEW), and work in radioactive environments including nuclear site work.
Ensure that all business activities are performed with the highest ethical standards and in compliance with the ATS Code of Business Conduct.
Perform other specific duties or projects, as assigned.

HEALTH AND SAFETY REQUIREMENTS:

All employees have the responsibility to work in a healthy and safe manner, report any health, safety or environmental concern to their manager or supervisor in a timely manner, and participate in the safety culture of the organization.

Employee responsibilities for Health, Safety and Environment include:

Work in conformance with divisional health, safety and environmental procedures and compliance with legislative requirements.
Refrain from removing or altering safety devices or guarding unless hazardous energies are controlled through lockout-tagout methods.
Report any unsafe conditions or unsafe acts, defects in any equipment or protective device, and any accidents/incidents to the supervisor.
Ensure that the required protective equipment is used for assigned tasks.
Attend all required health, safety and environmental training.
Assist in investigating accidents/incidents where applicable.
Refrain from engaging in any prank, contest, feat of strength, unnecessary running or rough and boisterous conduct.

Qualifications

Education:

A post-secondary degree in Mechanical, Mechatronics, Systems Design, Electrical, or Computer Engineering, Engineering Physics, Engineering Science, or equivalent.

Experience:

A thorough understanding of machine design and build, and structured problem solving.
Competent in mechanical CAD software (SolidWorks preferred), capable of designing tooling from sketches or verbal concepts, with a working knowledge of common machine shop techniques.
5 years of prior experience in mechanical, electrical, controls or systems engineering support, preferably in an automation environment and with customer interaction is an asset.
Experience in nuclear tooling/equipment development is an asset.
Excellent communication skills and ability to lead or work as part of a multi-disciplinary project team.

Apply About employer

More about this job

Responsibilities

Learn customer processes and lead or support systems engineering activities, including defining requirements, analyzing designs, and verifying system capability. Coordinate technical execution from design through integration and launch, manage project risks, work with customers and vendors, and support quality, cost, and delivery improvements.

Requirements

A post-secondary degree in mechanical, mechatronics, systems design, electrical, or computer engineering, engineering physics, engineering science, or an equivalent field is required. Candidates should understand machine design and build, structured problem solving, and mechanical CAD; five years of engineering support experience is an asset, as are automation and nuclear equipment experience.

Skills

Systems Engineering
Mechanical Design
Machine Design
Mechanical CAD
SolidWorks
Requirements Definition
Requirements Verification
Technical Risk Mitigation
Structured Problem Solving
Systems Integration
Acceptance Testing
Technical Documentation
Vendor Management
Customer Communication
Multidisciplinary Team Leadership
Nuclear Engineering

Benefits

Annual Incentive Bonus
Stock Purchase Plan
Three Weeks Vacation
Health Care Benefits
Health Care Spending Account
Employee Engagement Events
Employee Development Programs

Visa sponsorship

Not detected in the job text

Keywords

Systems Engineering
Nuclear Tooling
Machine Design
Mechanical CAD
SolidWorks
Automation
Requirements Definition
Requirements Verification
Verification Matrix
Failure Modes and Effects Analysis
Safety Risk Assessment
ALARA
Structural Integrity
Drive Sizing
Gauge R&R
Pressure and Flow
Heat Transfer
Codes and Standards
Vendor Technical Specifications
Acceptance Testing
Factory Acceptance Testing
Site Acceptance Testing
Proof of Principle Testing
Design Reviews
Technical Risk Assessment
CSA N299
CSA B51
CSA N285
CSA NQA

Report this job