Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 1 min ago
S
Electrical Engineering Technologist
SCIEX
Vaughan, ON
- $81,500 to $89,000 CAD / year
- Full-time
The Electrical Engineering Technologist is responsible for assisting Electrical Designers/Engineers in the development and qualification of research and engineering-grade electrical…
Added 1 min ago
S
Senior Electrical Engineer/Designer
SCIEX
Vaughan, ON
- $111,333 to $122,500 CAD / year
- Full-time
…electronics, magnetics, system integration, and risk-based engineering while providing technical leadership across multidisciplinary…
Added 1 min ago
A
Senior Project Engineer - Minerals and Metals
Ausenco
Burlington, ON
- Full-time
Coordinate and oversee multidisciplinary engineering activities across civil, structural, mechanical, piping, electrical, instrumentation, and process disciplines.
Added 1 min ago
A
Project Engineer - Minerals and Metals
Ausenco
Burlington, ON
- Full-time
Coordinate engineering activities across multidisciplinary teams, including civil, structural, mechanical, piping, electrical, instrumentation, and process engineering.
Added 1 min ago
Electrical Coordinator
Aecon
Fredericton, NB
Track technical queries and interfaces with civil and mechanical works.
Added 1 min ago
ENGINEERING TECHNOLOGIST TECHNICIAN 1
City of Toronto
Toronto, ON
As an Engineering Technologist Technician 1, the successful candidate will support the Street Permits section of Transportation Services division in the Utility Management or Construction…
Added 17 mins ago
A
Senior Electrical Engineer, Data Centers
AECOM
Markham, ON
- $125,000 to $175,000 CAD / year
- Full-time
You will design resilient critical-power infrastructure, solve complex engineering challenges, collaborate with clients and multidisciplinary teams, and help develop the next generation of…
Added 17 mins ago
A
Mechanical Engineer, Data Centers
AECOM
Markham, ON
- $90,000 to $145,000 CAD / year
- Full-time
Perform cooling-load calculations, equipment sizing, capacity planning, and other mechanical engineering analyses.
Added 17 mins ago
A
Mechanical Engineering Lead, Data Centers
AECOM
Markham, ON
- $145,000 to $195,000 CAD / year
- Full-time
AECOM is seeking an experienced Mechanical Engineering Lead to join our growing Canadian Data Center team.
Added 17 mins ago
A
Design Manager, Data Centers
AECOM
Markham, ON
- $150,000 to $200,000 CAD / year
- Full-time
Degree in Architecture, Mechanical Engineering or Electrical Engineering, plus 8 years of relevant experience or demonstrated equivalency of experience and/or education.
Added 17 mins ago
A
Senior Mechanical Engineer, Data Centers
AECOM
Markham, ON
- $125,000 to $175,000 CAD / year
- Full-time
You will design advanced cooling and mechanical infrastructure, solve complex engineering challenges, collaborate with clients and multidisciplinary teams, and help develop the next…
Added 17 mins ago
A
Electrical Engineer, Data Centers
AECOM
Markham, ON
- $90,000 to $140,000 CAD / year
- Full-time
Perform electrical load calculations, equipment sizing, voltage-drop calculations, and other engineering analyses.
Added 17 mins ago
A
Control Systems Designer, Data Centers
AECOM
Markham, ON
- $90,000 to $140,000 CAD / year
- Full-time
Coordinate with mechanical teams to develop controls for HVAC, heat-rejection, hydronic, and related building systems.
Added 2 hours ago
AI
Mechanical Quality Inspector
Aversan Inc.
Montreal, QC
- $62,000 to $74,000 CAD / year
- Full-time
Hold a DEC (Diploma of College Studies) or a Diploma of Vocational Studies (DVS) in Mechanical Engineering, Electronics, Aeronautics, Electromechanics, or a related technical discipline, or…
Added 2 hours ago
W
Senior Mechanical Engineer
Worley
Vancouver, BC
- Full-time
Worley is seeking a Senior Material Handling Engineer / Project Manager to provide senior-level mechanical engineering, materials handling, and project management expertise within the…
Added 2 hours ago
W
Senior Electrical Engineer
Worley
Vancouver, BC
- Full-time
Coordinating electrical engineering activities with multidisciplinary teams (process, instrumentation, mechanical, piping, automation) to ensure integrated project delivery.
Added 3 hours ago
BG
Technicien·ne d’atelier - Manutention | Heavy Equipment Technician - Material Handling
Brandt Group of Companies
Saint-Augustin-de-Desmaures, QC
- Full-time
Added 3 hours ago
TC
Heavy Duty Mechanic (full-time) - Abbotsford
Transdev Canada
Abbotsford, BC
- Full-time
Diagnose, troubleshoot, and repair mechanical, electrical, hydraulic, fuel injection, suspension, brake, drivetrain, steering, and transmission systems.
Added 3 hours ago
TT
Project Engineer (Laval)
Trane Technologies
Longueuil, QC
- Full-time
Degree in Electrical/Mechanical Engineering, Construction or Engineering Technology, or other related areas; or three (3) plus years of experience in the HVAC industry performing project…
Added 3 hours ago
TT
Project Engineer (Laval)
Trane Technologies
Laval, QC
- Full-time
Degree in Electrical/Mechanical Engineering, Construction or Engineering Technology, or other related areas; or three (3) plus years of experience in the HVAC industry performing project…
Added 3 hours ago
W
Maintenance Supervisor (Manufacturing)
Wonderbrands
Concord, ON
- Other
Support Bakery Team Leader in submitting Capitol Requests and work with Engineering to ensure proper pricing and scope of work is correct on submissions.
Added 3 hours ago
SG
Journeyperson Heavy Equipment Technician
Sokil Group of Companies
AB · Edmonton, AB
- Full-time
· Diagnose and troubleshoot mechanical, electrical, and hydraulic issues.
Added 4 hours ago
PC
Engineering Intern - Materials, Mechanical, or Engineering Technology - May 2027 (8-Month Term)
Parkland Corporation
Burnaby, BC
- Other
Currently enrolled in a Canadian post-secondary institution and pursuing a degree in Materials Engineering or Mechanical Engineering, or a diploma or degree in Engineering Technology.
Added 4 hours ago
PC
Engineering Intern - Materials, Mechanical, or Engineering Technology - May 2027 (8-Month Term)
Parkland Corporation
Burnaby, BC
- Other
Currently enrolled in a Canadian post-secondary institution and pursuing a degree in Materials Engineering or Mechanical Engineering, or a diploma or degree in Engineering Technology.
Added 4 hours ago
BR
Mechanical Designer
Bold Robotic Solutions Inc.
Vineland, ON
- Full-time
The Mechanical Designer is responsible for producing detailed mechanical designs, drawings, and documentation that support the development and production of Bold Robotic Solutions’ robotic…

Aversan Inc.

Mechanical Quality Inspector

Montreal, QC, Canada

$62,000 to $74,000 CAD / year · Full-time

Apply About employer

Applications open in a new tab.

Job details

Pay: $62,000 to $74,000 CAD / year
Job type: Full-time
Apply by: Nov 26, 2026
Posting language: English
Posted: Oct 27, 2026

Original job description

Aversan Inc. (www.aversan.com) is a trusted multi-service engineering and electronics manufacturing company. Aversan delivers leading-edge and reliable safety-critical electronics and software systems to the aerospace, defence, and space industries.

We are currently seeking a qualified Inspector – Mechanical - Evening Shift (3PM-11PM) to join our team. The ideal candidate will have experience in inspection processes, knowledge of relevant standards, and proficiency in using measuring instruments.

Location: Montreal, QC

Job Type: Full Time

Working Arrangement: On-site

Responsibilities

Inspect incoming purchased components, machined parts, and associated documentation to verify compliance with purchase order requirements, engineering drawings, technical specifications, and applicable quality standards.
Maintain accurate component traceability by recording inspection results, updating information in the Enterprise Resource Planning (ERP) system, and ensuring all required production and quality records are properly documented.
Review technical documents and verify that drawings, specifications, and other controlled documents are at the correct revision level (CFC) before performing inspections or approving components for further processing.
Perform dimensional and visual inspections of machined parts using appropriate manual and automated measuring instruments, including vernier calipers, micrometers, gauges, and Coordinate Measuring Machines (CMM), where applicable.
Conduct quality checks on painted and plated components, including paint adhesion testing and verification of plating reports, to ensure compliance with specified material, coating, and finishing requirements.
Interpret engineering drawings, dimensional requirements, and geometric tolerances, performing the necessary trigonometric calculations to accurately measure components and verify their conformity to design specifications.
Inspect sub-component assemblies, work-in-progress assemblies, and finished products to identify defects, verify assembly quality, and ensure compliance with applicable standards, specifications, and program requirements.
Identify and document non-conformances, prepare detailed non-conformance reports, investigate or communicate discrepancies, and follow up on corrective actions to support timely resolution of quality issues.
Verify the integrity of electrical and electromechanical connections by checking connector retention, wire tension, and continuity of cables, wires, and harnesses in accordance with applicable inspection procedures and IPC standards.
Support Quality Assurance and Research and Development activities by assisting with quality investigations, inspection documentation, minor rework when authorized, and other manufacturing, assembly, or production support tasks as required

Basic Qualifications

Hold a DEC (Diploma of College Studies) or a Diploma of Vocational Studies (DVS) in Mechanical Engineering, Electronics, Aeronautics, Electromechanics, or a related technical discipline, or possess an equivalent recognized qualification.
Have 2–5 years of relevant experience in mechanical inspection, incoming quality inspection, manufacturing quality control, electromechanical assembly, aerospace manufacturing, or a closely related technical environment.
Demonstrate strong French-language proficiency, with the ability to understand technical instructions, communicate inspection findings, document quality issues, and collaborate effectively with colleagues in a French-speaking workplace.
Possess the ability to read and interpret engineering drawings, technical plans, specifications, and work instructions to determine inspection requirements and verify component conformity.
Have a sound understanding of dimensional tolerances and Geometric Dimensioning and Tolerancing (GD&T), including the ability to assess measurements against specified limits and identify deviations from engineering requirements.
Demonstrate practical knowledge of quality assurance principles, inspection methodologies, manufacturing quality procedures, and established processes for identifying, documenting, and resolving non-conformances.
Possess working knowledge of IPC-A-610 and IPC-A-620 standards, as applicable, for inspecting electronic assemblies, soldered connections, cables, wires, and wire harnesses.
Have experience using precision measuring instruments, such as vernier calipers, micrometers, gauges, and other manual or automated inspection equipment, with the ability to perform accurate measurements and maintain fine manual dexterity.
Be comfortable retrieving, entering, and maintaining technical and inspection data using computer systems, ERP platforms, production databases, and electronic quality documentation tools while ensuring accuracy and traceability.
Demonstrate sound judgment, strong attention to detail, and the ability to work independently within established procedures, assess inspection results, recognize quality issues, and escalate discrepancies appropriately; basic English proficiency and previous hands-on inspection experience are considered assets.

Please Note

Interested applicants must apply directly to

The name of the file for the resume should be the applicant's full name and the position title you are applying for. The resume format should be PDF.

Compensation: $62,000 – $74,000 CAD (annual salary)

The base salary or rate offered to an applicant within this range is determined by considering several factors, including the individual's geographic location, skills, competencies, and unique qualifications. This ensures compensation is fair and aligned with the specific requirements and attributes of each candidate.

Vacancy Status: This posting is for an existing vacancy.

AI in Hiring: We use AI tools to assist with application management (e.g., organizing submissions and surfacing potentially relevant qualifications). AI is not used to make hiring decisions. All decisions are made by our hiring managers and recruitment team. Our use of AI is governed by security and privacy risk assessments aligned with our cybersecurity framework

Apply About employer

More about this job

Responsibilities

Inspect incoming components, machined parts, assemblies, and finished products against drawings, specifications, purchase orders, and quality standards using manual and automated measuring equipment. Maintain traceable inspection records, document and follow up on non-conformances, verify electrical and electromechanical connections, and support quality investigations and production activities.

Requirements

Requires a DEC, DVS, or equivalent technical qualification and 2–5 years of relevant inspection, manufacturing quality, or electromechanical experience. Candidates should be proficient in French, able to interpret engineering drawings and GD&T, use precision measuring instruments and ERP systems, and have working knowledge of IPC-A-610 and IPC-A-620.

Skills

Mechanical Inspection
Dimensional Inspection
Visual Inspection
Engineering Drawing Interpretation
Geometric Dimensioning And Tolerancing
Precision Measuring Instruments
Coordinate Measuring Machines
Quality Assurance
Non-Conformance Reporting
Corrective Action Follow-Up
Component Traceability
ERP Data Entry
IPC-A-610
IPC-A-620
Paint Adhesion Testing
Trigonometric Calculations

Visa sponsorship

Not detected in the job text

Keywords

Mechanical Inspection
Incoming Quality Inspection
Manufacturing Quality Control
Aerospace Manufacturing
Engineering Drawings
Technical Specifications
Geometric Dimensioning And Tolerancing
Dimensional Tolerances
Vernier Calipers
Micrometers
Gauges
Coordinate Measuring Machine
Enterprise Resource Planning
Component Traceability
Non-Conformance Reports
Corrective Actions
IPC-A-610
IPC-A-620
Electrical Connections
Electromechanical Assemblies
Wire Harnesses
Continuity Testing
Paint Adhesion Testing
Plating Reports
Quality Assurance
French Language

Report this job