Find work in Canada.

324,229 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 16 mins ago
Director, E-commerce & Digital Growth, Agricultural Retail
Talencore
ON · London (Sunningdale / West Masonville / Medway / NE Hyde Park / East Fox Hollow), Ontario
Full-time
Lead the growth of Indogulf’s direct-to-consumer websites, Amazon presence and other relevant marketplaces.
Added 30 mins ago
Grade Foreperson
VINCI Energies
Surrey, BC
Full-time
Review project requirements (quantities, cost codes, production rate, drawings …) with Superintendent
Added 30 mins ago
Buyer
Husky Technologies
Bolton, ON
Full-time
…passion of our people around the world and their desire to lead change. At the same time, we are not afraid to expect a lot and strive for leadership in all of our key markets. We are a…
Added 30 mins ago
Regional Sourcing Manager (Electronics Lane)
Husky Technologies
Bolton, ON
Full-time
…passion of our people around the world and their desire to lead change. At the same time, we are not afraid to expect a lot and strive for leadership in all of our key markets. We are a…
Added 30 mins ago
Associate Director of the Minnesota Rehabilitation and Reinvestment Act (State Prog Admin Manager Senior)
Minnesota Direct Care and Treatment
Saint-Paul, NB · St.-Paul, NB
Full-time
Supervisor, team lead, leadwork, or project lead;
Added 30 mins ago
Designer, Development (Electrical)
Husky Technologies
Bolton, ON
Full-time
…passion of our people around the world and their desire to lead change. At the same time, we are not afraid to expect a lot and strive for leadership in all of our key markets. We are a…
Added 30 mins ago
Financial Manager - PLM (Product Line Mgmt)
Husky Technologies
Bolton, ON
Full-time
…passion of our people around the world and their desire to lead change. At the same time, we are not afraid to expect a lot and strive for leadership in all of our key markets. We are a…
Added 30 mins ago
Manufacturing Engineer (Contract)
Husky Technologies
Bolton, ON
Full-time
…passion of our people around the world and their desire to lead change. At the same time, we are not afraid to expect a lot and strive for leadership in all of our key markets. We are a…
Added 30 mins ago
Mechanical Designer (Fluidpower)
Husky Technologies
Bolton, ON
Full-time
Lead engineering design as part of the product development process by focusing on systems level and concept design. Translating product definition into high quality, reliable and…
Added 30 mins ago
Financial Manager
Husky Technologies
Bolton, ON
Full-time
Prepare and publish monthly P&L’s for all levels of the CSM organization including the Regional Service Level; provide financial support to all GM’s, Directors, and Cost Centres owners
Added 1 hour ago
Senior Project Manager - Optical Networking & Hardware Product Development
Harvey Nash
Ottawa, ON
$140,000 to $180,000 CAD / year
Full-time
We're looking for a Senior Project Manager to lead complex cross-functional product development programs spanning hardware, firmware, software, manufacturing, quality, and operations teams.
Added 1 hour ago
AI/ML Engineer
lululemon
Vancouver, BC
Full-time
Contribute to implementation of model serving infrastructure meeting latency, throughput, and cost requirements using serving frameworks (TorchServe, Triton, BentoML, or equivalent)
Added 1 hour ago
Director - Global Procurement, Store Development & Facilities
lululemon
Vancouver, BC
Full-time
Lead annual productivity improvements in each category of spend by developing and ensuring implementation of ideas to optimize total cost of ownership (TCO) for spend categories
Added 2 hours ago
Vice President of Customer Experience (CX)
AMZ Prep®
Mississauga, ON
Full-time
You will run a book of your own, lead the team that runs the rest, and build the system that lets us see account health before it turns into churn.
Added 3 hours ago
Project Engineer/Coordinator - PL#27075
Peter Lucas
Kelowna, BC
Full-time
…schedules, and execution plans. The successful candidate will lead and coordinate multidisciplinary engineering teams and consultants in the development, review, and delivery of technical…
Added 3 hours ago
Senior Project Manager
AgileGrid Solutions
Canada
Full-time
We are seeking an experienced Senior Project Manager with a strong background in mining to lead multidisciplinary engineering teams in delivering capital mining and mineral processing…
Added 3 hours ago
Account Coordinator - XM & Events
Coveted Co.
Toronto, ON
Full-time
Assist in budget tracking, invoice management, and cost reconciliation
Added 4 hours ago
Program Manager
Foster Nation
Brampton, ON · Regional Municipality of Peel, ON
Full-time
Foster Nation is seeking a dedicated professional to lead the design, implementation, and rapid expansion of our core programs and empowerment initiatives. At Foster Nation, we believe that…
Added 4 hours ago
Front End - Manager Front End
Sobeys Capital Incorporated or a Franchise/Affiliate / ou une franchise/société affiliée
Stoney Creek, NB
…sales forecasting, variance analysis and correction, and labour cost…
Added 6 hours ago
Manufacturing Engineer (Contract)
Husky Technologies
Bolton, ON
Full-time
…passion of our people around the world and their desire to lead change. At the same time, we are not afraid to expect a lot and strive for leadership in all of our key markets. We are a…
Added 6 hours ago
Buyer
Husky Technologies
Bolton, ON
Full-time
…passion of our people around the world and their desire to lead change. At the same time, we are not afraid to expect a lot and strive for leadership in all of our key markets. We are a…
Added 6 hours ago
Regional Sourcing Manager (Electronics Lane)
Husky Technologies
Bolton, ON
Full-time
…passion of our people around the world and their desire to lead change. At the same time, we are not afraid to expect a lot and strive for leadership in all of our key markets. We are a…
Added 6 hours ago
Mechanical Designer (Fluidpower)
Husky Technologies
Bolton, ON
Full-time
Lead engineering design as part of the product development process by focusing on systems level and concept design. Translating product definition into high quality, reliable and…
Added 6 hours ago
Financial Manager - PLM (Product Line Mgmt)
Husky Technologies
Bolton, ON
Full-time
…passion of our people around the world and their desire to lead change. At the same time, we are not afraid to expect a lot and strive for leadership in all of our key markets. We are a…
Added 6 hours ago
Designer, Development (Electrical)
Husky Technologies
Bolton, ON
Full-time
…passion of our people around the world and their desire to lead change. At the same time, we are not afraid to expect a lot and strive for leadership in all of our key markets. We are a…

Belcan

Manufacturing Engineer

Greater Montreal Metropolitan Area, QC, Canada

Pay: $35 to $39 CAD / hour
Job type: Contract
Apply by: Oct 25, 2026
Posting language: English · French
Posted: Sep 25, 2026

Apply About employer

Applications open in a new tab.

Original job description

English section of this bilingual listing.

An interesting opportunity for a civil aviation MANUFACTURING ENGINEER - Component Repair has arisen in our Montreal facilities. In this role, you will be responsible to provide technical support to operations and execute Manufacturing Engineering activities to develop, maintain and continuously improve manufacturing processes and/or methods of manufacture, which are capable of meeting and continuing to meet business and customer requirements for safety, quality, cost, deliver rate and lead time (SQCD).

Key Accountabilities

HSE - Ensure that manufacturing processes are in full compliance to Health, Safety & Environmental Standards and meet the expectations of the Zero Harm program.
Product Safety - Ensure that manufacturing processes are capable of achieving and sustaining the design intent, and that processes are followed so that our products and those of our suppliers conform to their specification. Rigorously raise, investigate and resolve safety related issues.
Quality - Drive a culture of zero defects within the organization. Works with all functions to reduce risk and drive product Right First Time. Ensure compliance to all relevant company, legislative and technical policies and standards including RRMS, SABRe and Export Control and Intellectual Property requirements.
Planning - Plan and manage activities including schedule, resources and costs, gaining buy-off and communicating current status to relevant stakeholders. Ensure issues and risks are resolved to meet project timescales.
Develop Capability - Develop, implement, validate, maintain and continuously improve manufacturing processes, digital systems and/or methods of manufacture which are capable of meeting and continue to meet requirements for safety, quality, cost, delivery rate and lead time. Capture, analyze and use data to demonstrate and improve the current and future capability of manufacturing processes.
Provide tooling development and support to operational and engineering teams for new and existing products and repair capabilities with a goal of improving efficiency and quality.
Collaboration & Knowledge Sharing - Work with interfacing teams and local experts to ensure technical aspects of manufacturing processes and digital systems are understood and accounted for as required. Capture and utilize lessons learnt. Identify, document and share best practice, including by participation in relevant Communities of Practice.
Basic Requirements:
Professionally Qualified Engineer
Recognized national or international engineering accreditation and path to OIQ accreditation
General understanding of manufacturing processes and related software tools relevant to their business
Understanding of Manufacturing Engineering and repair processes relevant to their
role such as conventional and CNC machining, fitting and polishing
Capable of interpreting engineering and technical drawings, thorough understanding of geometric dimensioning and tolerancing (GD&T)
Experience with design, manufacturing and testing of specific-to-product tooling and fixtures
Familiar with chemical and wash consumables and procedures (Preferred)
5 years or more experience working in a shop or factory environment (Preferred)
Experience with project management in a fast paced environment

Avantages :

Stationnement sur place
Lieu du poste : En présentiel

Read the full bilingual original

Job description:

Lieu : Lachine, QC

Contrat- renouvable

Indicatifs régionaux : 514, 438 et 450

Code postal : H8T

Date de début : dès que possible

Mots-clés : #ingénieur.fabrication #ingénieur.aérospatiale #offres.d'emploi.ingénieur

#INDCAN

INGÉNIEUR DE FABRICATION - Réparation de composants

Une opportunité intéressante de poste d’INGÉNIEUR DE FABRICATION - Réparation de composants dans le secteur de l’aviation civile s’est présentée au sein de nos installations de Montréal. À ce poste, vous serez chargé(e) d’apporter un soutien technique aux opérations et de mener à bien des activités d’ingénierie de fabrication afin de développer, de maintenir et d’améliorer en permanence les processus et/ou méthodes de fabrication, de manière à répondre et à continuer de répondre aux exigences de l’entreprise et des clients en matière de sécurité, de qualité, de coût, de taux de livraison et de délais (SQCD).

Principales responsabilités

HSE (Santé, Sécurité et Environnement) - Veiller à ce que les processus de fabrication soient pleinement conformes aux normes de santé, de sécurité et d’environnement et répondent aux attentes du programme « Zero Harm ».
Sécurité des produits - Veiller à ce que les processus de fabrication permettent d’atteindre et de maintenir l’intention de conception, et à ce que les processus soient respectés afin que nos produits et ceux de nos fournisseurs soient conformes à leurs spécifications. Signaler, examiner et résoudre rigoureusement les problèmes liés à la sécurité.
Qualité – Promouvoir une culture du « zéro défaut » au sein de l’organisation. Collaborer avec tous les services pour réduire les risques et favoriser la « qualité dès la première fois ». Veiller au respect de l’ensemble des politiques et normes pertinentes de l’entreprise, législatives et techniques, y compris les exigences RRMS, SABRe, de contrôle des exportations et de propriété intellectuelle.
Planification – Planifier et gérer les activités, notamment le calendrier, les ressources et les coûts, en obtenant l’aval des parties prenantes et en communiquant l’état d’avancement aux personnes concernées.
Développement des capacités – Développer, mettre en œuvre, valider, maintenir et améliorer en permanence les processus de fabrication, les systèmes numériques et/ou les méthodes de fabrication capables de répondre et de continuer à répondre aux exigences en matière de sécurité, de qualité, de coût, de taux de livraison et de délais d’exécution. Collecter, analyser et exploiter les données afin de démontrer et d’améliorer les capacités actuelles et futures des processus de fabrication.
Assurer le développement d’outillages et apporter un soutien aux équipes opérationnelles et d’ingénierie pour les produits nouveaux et existants ainsi que pour les capacités de réparation, dans le but d’améliorer l’efficacité et la qualité.
Collaboration et partage des connaissances – Travailler avec les équipes en interface et les experts locaux pour s’assurer que les aspects techniques des processus de fabrication et des systèmes numériques sont compris et pris en compte comme il se doit. Recueillir et exploiter les enseignements tirés. Identifier, documenter et partager les meilleures pratiques, notamment en participant aux communautés de pratique pertinentes.

Exigences de base :

Ingénieur titulaire d’un diplôme professionnel
Accréditation d’ingénieur reconnue au niveau national ou international et parcours menant à l’accréditation de l’OIQ
Compréhension générale des processus de fabrication et des outils logiciels associés pertinents pour son domaine d’activité
Compréhension de l’ingénierie de fabrication et des processus de réparation pertinents pour son poste, tels que l’usinage conventionnel et CNC, l’ajustage et le polissage
Capacité à interpréter des dessins techniques et d’ingénierie, compréhension approfondie du dimensionnement et des tolérances géométriques (GD&T)
Expérience en conception, fabrication
Tâches telles que l'usinage conventionnel et CNC, le montage et le polissage
Capacité à interpréter des dessins techniques et d'ingénierie, maîtrise approfondie du dimensionnement et des tolérances géométriques (GD&T)
Expérience dans la conception, la fabrication et les essais d'outillages et de montages spécifiques à un produit
Connaissance des consommables et des procédures de traitement chimique et de lavage (un atout)
5 ans ou plus d'expérience professionnelle dans un atelier ou une usine (souhaitable)
Expérience en gestion de projet dans un environnement au rythme soutenuJob title: Manufacturing Engineer

12 Month renewable Contract -

Location: Lachine, QC

Area code: 514, 438, & 450

Postal code: H8T

Start Date: ASAP

Key words: #manufacturing.engineer #aerospace.engineer #engineer.jobs

MANUFACTURING ENGINEER - Component Repair

Key Accountabilities

HSE - Ensure that manufacturing processes are in full compliance to Health, Safety & Environmental Standards and meet the expectations of the Zero Harm program.
Product Safety - Ensure that manufacturing processes are capable of achieving and sustaining the design intent, and that processes are followed so that our products and those of our suppliers conform to their specification. Rigorously raise, investigate and resolve safety related issues.
Quality - Drive a culture of zero defects within the organization. Works with all functions to reduce risk and drive product Right First Time. Ensure compliance to all relevant company, legislative and technical policies and standards including RRMS, SABRe and Export Control and Intellectual Property requirements.
Planning - Plan and manage activities including schedule, resources and costs, gaining buy-off and communicating current status to relevant stakeholders. Ensure issues and risks are resolved to meet project timescales.
Develop Capability - Develop, implement, validate, maintain and continuously improve manufacturing processes, digital systems and/or methods of manufacture which are capable of meeting and continue to meet requirements for safety, quality, cost, delivery rate and lead time. Capture, analyze and use data to demonstrate and improve the current and future capability of manufacturing processes.
Provide tooling development and support to operational and engineering teams for new and existing products and repair capabilities with a goal of improving efficiency and quality.
Collaboration & Knowledge Sharing - Work with interfacing teams and local experts to ensure technical aspects of manufacturing processes and digital systems are understood and accounted for as required. Capture and utilize lessons learnt. Identify, document and share best practice, including by participation in relevant Communities of Practice.
Basic Requirements:
Professionally Qualified Engineer
Recognized national or international engineering accreditation and path to OIQ accreditation
General understanding of manufacturing processes and related software tools relevant to their business
Understanding of Manufacturing Engineering and repair processes relevant to their
role such as conventional and CNC machining, fitting and polishing
Capable of interpreting engineering and technical drawings, thorough understanding of geometric dimensioning and tolerancing (GD&T)
Experience with design, manufacturing and testing of specific-to-product tooling and fixtures
Familiar with chemical and wash consumables and procedures (Preferred)
5 years or more experience working in a shop or factory environment (Preferred)
Experience with project management in a fast paced environment

Avantages :

Stationnement sur place

Lieu du poste : En présentiel

Apply About employer

More about this job

Responsibilities

Provide technical support to operations and develop, validate, maintain, and continuously improve manufacturing and repair processes to meet safety, quality, cost, delivery, and lead-time requirements. Plan engineering activities, develop tooling, analyze process data, resolve safety and quality issues, and collaborate with teams to share lessons learned and best practices.

Requirements

Requires a professionally qualified engineer with recognized engineering accreditation and a path toward OIQ accreditation, along with knowledge of manufacturing and repair processes, machining, fitting, polishing, and GD&T. Experience designing and testing product-specific tooling and fixtures and managing projects in a fast-paced environment is required; five or more years in a shop or factory and familiarity with chemical and washing procedures are preferred.

Skills

Manufacturing Engineering
Component Repair
Conventional Machining
CNC Machining
Fitting
Polishing
Geometric Dimensioning And Tolerancing (GD&T)
Technical Drawing Interpretation
Tooling And Fixture Design
Manufacturing Process Improvement
Project Management
Data Analysis
Quality Assurance
Product Safety
Chemical Processing
Stakeholder Collaboration

Benefits

On-Site Parking

Visa sponsorship

Not detected in the job text

Keywords

Manufacturing Engineering
Component Repair
Civil Aviation
Aerospace
Conventional Machining
CNC Machining
Fitting
Polishing
Geometric Dimensioning And Tolerancing (GD&T)
Technical Drawings
Tooling
Fixtures
Manufacturing Processes
Process Validation
Process Improvement
Digital Systems
Data Analysis
Health, Safety, And Environment (HSE)
Zero Harm
Product Safety
Quality Assurance
Right First Time
RRMS
SABRe
Export Control
Intellectual Property
Project Management
Chemical Processing
Washing Procedures
OIQ Accreditation

Report this job