Find work in Canada.

328,117 jobs across our Canadian network. How we count

Jobs in Canada

17 jobs

Save this search

Added 5 days ago
Quality Assurance Technician
JD Sweid Foods (2013) Ltd.
Waterloo, ON
Full-time
o Starting hourly wage of $22.75, increasing to $23.75 after 1,000 hours worked, plus applicable night shift and weekend premiums. Overtime is paid after 40 hours worked per week.
Added 5 days ago
Quality Assurance Technician (Night Shift, Temporary-to-Permanent Opportunity)
JD Sweid Foods LTD
Waterloo, ON
Full-time
Starting hourly wage of $22.75, increasing to $23.75 after 1,000 hours worked, plus applicable night shift and weekend premiums. Overtime is paid after 40 hours worked per week.
Added 6 days ago
Kiefel Operator - Weekend Night shift (Friday and Saturday 23:00-11:00
Baxter International Inc.
Alliston, ON
Part-time
…hard-working Plastics Operator to work permanent part-time on our Weekend Night shift (Friday to Saturday 23:00h-11:00h EST and Saturday to Sunday 23:00h-11:00h EST). We offer an Employee…
Added 6 days ago
APF MH - Weekend Night (Friday and Saturday 23:00-11:00)
Baxter International Inc.
Alliston, ON
Part-time
…energetic, hard-working APF MH to work part-time permanent on our Weekend Night shift (Friday to Saturday 23:00h-11:00h EST and Saurday to Sunday 23:00h-11:00h EST) at our Alliston…
Added 16 days ago
Nuclear laundry Worker (TEMP)
Kinectrics
Teeswater, ON
Temporary
Hours per week: 40 hours per week (this is a shift worker position. Shift workers may be assigned to work 8, 10 or 12 hour shifts. Overtime and weekend work may be required. Shift Workers…
Added 1 month ago
Sealer
Johnson Controls
Edmonton, AB · SA - Edmonton Orion
Full-time
Weekend Night Shift: Friday through Sunday, 6:00 PM to 6:00 AM
Added 1 month ago
CAN_Packager - Night Shift
PCI Pharma Services
Mississauga, ON · CAN_Mississauga
Full-time
7. Identifies quality issues or concerns and brings these to the attention of the Line Leader, Shift Lead and/or Production Manager for appropriate action.
Added 14 days ago
General Labor - Sample Prep Technician - Whitehorse/Yukon (EVG)
Bureau Veritas
Whitehorse, YT
Receive, verify, label, prepare, crush, pulverize, and sieve geological samples according to Standard Operating Procedures without deviation unless authorized by the Manager.
Added 1 month ago
Powder Coater
AGI | Global Food Infrastructure
Lethbridge, AB · Nobleford, AB
Full-time
May require shift work (day, night, weekend, or rotating shifts).
Added 3 months ago
Ticketed Millwright: Night Shift
Bimeda
Cambridge, Ontario
Full-time
Shift: Night Shift (Monday - Friday) 11:00pm - 7:30am.
Added 2 months ago
Journeyman Electrician Tester - Weekend Night Shift
Johnson Controls
Edmonton, Alberta · Nisku, Alberta
Full-time
Communication is primarily internal to the assigned work team and Team Lead/Supervisor/Senior Production Manager.
Added 2 months ago
Operations Manager
thyssenkrupp Materials NA
Remote, Canada
Full-time · Remote
The Operations Manager provides visible, hands-on leadership for the Concord 24-hour metal distribution operation, ensuring safe, efficient, and disciplined execution across all shifts.…
Added 4 months ago
Ticketed Millwright: Night Shift
Bimeda
Cambridge, ON
Full-time
Shift: Night Shift (Monday - Friday) 11:00pm - 7:30am.
Added 3 months ago
Millwright/Refrigeration B Operator – Night Shift
Sunrise Farms
Cambridge, Ontario
Full-time
Night shift: 10:30PM – 7:30AM, Monday to Friday. Overtime may be required, including weekend rotation.
Added 4 months ago
Manufacturing Process Operator (Weekend Night Shift)
Teledyne Technologies Incorporated
Edmonton, Alberta · Canada - Edmonton, AB
Part-time
We are seeking a Manufacturing Process Operator to join our team in Edmonton, AB. This is a part-time weekend shift position. In this role, you will work in a team setting to deliver…
Added 4 months ago
Assembler (Weekend Night Shift)
Johnson Controls
Nisku, Alberta · Sherwood Park, Alberta
Full-time
This role will be offered to work Friday-Sunday Night Shift (6:15 PM - 5:45 AM in Nisku or 6 PM - 5:30 AM at Sherwood Park).
Added 4 months ago
Facility Controller
AGI | Global Food Infrastructure
Lethbridge, Alberta · Alberta
Full-time
May require shift work (day, night, weekend, or rotating shifts).

No more jobs.

Bimeda

Ticketed Millwright: Night Shift

Cambridge, ON, N3C 2W4, Canada

Pay: Compensation: $49.15/Hour.
Job type: Full-time
Experience: 3-5 years of maintenance experience in a manufacturing setting, preferably in a food/beverage or pharmaceutical or food/beverage manufacturing setting.
Posting language: English
Posted: May 5, 2026

Apply About employer

Applications open in a new tab.

Original job description

Job Title: Ticketed Millwright Location: Cambridge, ON (In-Office) Position Type: Full-time regular

Shift: Night Shift (Monday - Friday) 11:00pm - 7:30am. Vacancy Status: This role is currently vacant. Union role. AI Disclosure in Hiring: Artificial intelligence (AI) may be used to assist with certain aspects of the recruitment process, including the initial review and screening of applications. Final hiring decisions are made by Human Resources and hiring managers.

Job Summary

Reporting to the Maintenance Manager, the Maintenance Millwright is responsible for providing expert mechanical, support to building services, manufacturing and packaging operations in compliance with company SOPs and GMP requirements. Includes general repairs, troubleshooting and preventative maintenance activities on cGMP process equipment, utility systems, and facilities with minimal disruption to production.

Compensation: $49.15/Hour. After completion of probation: $49.66/Hour.

Job Duties

Performs packaging and manufacturing equipment troubleshooting, set up and operation (assess, assemble, align and monitor). Includes: breakdown (disassembly and inspection) of packaging and manufacturing equipment; safely rig, move, hoist and position equipment as necessary.
Performs maintenance, repair and preventative maintenance (P.M.) activities and completes related documentation as per the Standard Operating Procedure (SOP) for building, manufacturing, packaging and other equipment (e.g. compressed air, boilers, HVAC, Water for Injection and Clean Steam systems etc.).
Works in compliance with established cGMP and safe work practices and procedures, using personal protection and safety equipment as required. Reports any accidents, incidents and injuries or illnesses immediately and notifies manager of any hazards, unsafe acts or conditions in the workplace.
Identifies, reports on and repairs deficiencies in mechanical, electrical and PLC related equipment and systems throughout the plant. Identifies and sources appropriate/required equipment parts. Performs minor repairs including plumbing, painting, carpentry and other general repairs as needed in the facility.
Fabricates (cuts, welds, assembles) components as may be required for repair or modification of equipment, including fitting piping in threaded, welded and sanitary configurations.
Must be able to operate safely all hand tools, power tools, multi meter tester and other equipment.
Assists in supervision of contractor services as required and ensures that work is completed in accordance to safety regulations
Communicates daily Maintenance Activities with the Maintenance Manager and team, as well as updates all daily logs.
Able to work in a Sterile environment and must pass gown certification to remain in the role.
Mandatory rotating weekend On-Call (if applicable).
Flexible to work overtime if needed.
This position is covered under a collective bargaining agreement, with The United SteelWorkers Union, Local 2000.
Other duties as assigned

What you will bring to the role

Certified Millwright ticket required. Trade certificate – 433A
433A ticket with a 442A or 309A considered an asset and a $2.00 ticket premium would apply.
Completion of Millwright Apprenticeship Program preferred
PLC knowledge or Certification would be considered an asset.
Basic knowledge of electrical systems an asset.
3-5 years of maintenance experience in a manufacturing setting, preferably in a food/beverage or pharmaceutical or food/beverage manufacturing setting.
Knowledge of highspeed filling and packaging lines and PLCs, aptitude in reading and interpreting blueprints, diagrams, schematics, drawings, manuals, and specifications considered an asset.
Able to lift and move heavy or awkward objects, visual acuity, manual dexterity, some repetitive movements and work in confined spaces.
Excellent math skills. Good command of the English Language, verbal, reading and writing.

What we offer

Medical, Dental, Vision Benefits.
Defined Contribution Pension Plan (2.5% Employee / 8% Employer Contribution).
Employee Assistance Program.

At Bimeda we are committed to fostering an inclusive, barrier-free and accessible environment. Part of this commitment includes arranging accommodations to ensure an equitable opportunity to participate in the recruitment and selection process. If you require an accommodation, we will work with you to meet your needs.

About Bimeda

Bimeda is a leading global innovator, manufacturer and marketer of veterinary pharmaceuticals and animal health products and has over half a century’s experience in providing science-driven solutions to optimize the health, wellbeing and productivity of the world’s animals.

Bimeda’s global innovation program sees six state-of-the art R&D centers across four continents collaborate on an enviable product development pipeline which anticipates the ever-evolving needs of the animal health industry.

Bimeda’s nine manufacturing facilities across seven countries allow the company to manufacture a broad range of preventative, curative and nutritional products including sterile injectables, vaccinations, nutritional boluses, feed additives, tablets, water-soluble powders, pastes and non-sterile liquids.

Globally, the company focuses on the development, manufacture and commercialization of quality Bimeda-branded products while also being the partner of choice for contract manufacturing and R&D services for prominent companies within the animal health industry.

More info at www.bimedacareers.com

Equal Opportunity & Accessibility

At Bimeda we are committed to fostering an inclusive, barrier-free and accessible environment. Part of this commitment includes arranging accommodations to ensure as equitable opportunity to participate in the recruitment and selection process. If you require an accommodation, we will work with you to meet your needs. We are committed to an inclusive and accessible recruitment process. We are an equal opportunity employer and assess candidates based on skills and experience. Recruitment records are retained in accordance with Ontario Law.

Apply About employer

More about this job

Responsibilities

The Maintenance Millwright provides expert mechanical support for building services, manufacturing, and packaging operations. Responsibilities include troubleshooting, preventative maintenance, and repairing cGMP process equipment and utility systems.

Requirements

A certified Millwright ticket (433A) and 3-5 years of maintenance experience in a manufacturing setting are required. Knowledge of PLCs, high-speed packaging lines, and the ability to work in sterile environments are highly valued.

Skills

Mechanical Troubleshooting
Preventative Maintenance
PLC Knowledge
Rigging
Welding
Fabrication
Blueprint Reading
cGMP Compliance
Electrical Systems
Plumbing
Carpentry
Equipment Alignment
HVAC Maintenance
Boiler Maintenance
Sterile Environment Gowning
Hand and Power Tools

Benefits

Medical Benefits
Dental Benefits
Vision Benefits
Employee Assistance Program

Visa sponsorship

Not detected in the job text

Keywords

Millwright
433A Ticket
442A Ticket
309A Ticket
PLC
cGMP
SOP
Preventative Maintenance
Packaging Lines
Pharmaceutical Manufacturing
Veterinary Pharmaceuticals
HVAC
Clean Steam Systems
Water For Injection
United SteelWorkers Union
Fabrication
Mechanical Engineering
Industrial Maintenance
Sterile Environment
Blueprints
Schematics

Report this job