Find work in Canada.

326,975 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Save this search

Added 48 mins ago
Registered Nurse, Perioperative
Stevenson Memorial Hospital
Alliston, ON
Internship
Demonstrates initiative and the ability to function both independently and as an inter-professional team member in a crisis and fast paced demanding environment.
Added 48 mins ago
Medical Radiation Technologist (CT & X-Ray)
Stevenson Memorial Hospital
Alliston, ON
Internship
Member of Ontario Association of Medical Radiation Sciences (OAMRS) recommended.
Added 48 mins ago
Registered Nurse - Med/Surg
Stevenson Memorial Hospital
Alliston, ON
Internship
Demonstrates initiative and the ability to function both independently and as an inter-professional team member in a fast paced demanding environment.
Added 48 mins ago
Registered Nurse - Med/Surg
Stevenson Memorial Hospital
Alliston, ON
Internship
Demonstrates initiative and the ability to function both independently and as an inter-professional team member in a fast paced demanding environment.
Added 48 mins ago
Registered Nurse - Med/Surg
Stevenson Memorial Hospital
Alliston, ON
Internship
Demonstrates initiative and the ability to function both independently and as an inter-professional team member in a fast paced demanding environment.
Added 48 mins ago
Registered Practical Nurse - Med/Surg
Stevenson Memorial Hospital
Alliston, ON
Full-time
Demonstrates initiative and the ability to function both independently and as an inter-professional team member in a fast paced demanding environment.
Added 48 mins ago
Medical Radiation Technologist (CT & X-Ray)
Stevenson Memorial Hospital
Alliston, ON
Internship
Member of Ontario Association of Medical Radiation Sciences (OAMRS) recommended.
Added 48 mins ago
Registered Nurse, Perioperative
Stevenson Memorial Hospital
Alliston, ON
Full-time
Demonstrates initiative and the ability to function both independently and as an inter-professional team member in a crisis and fast paced demanding environment.
Added 48 mins ago
Registered Respiratory Therapist
Stevenson Memorial Hospital
Alliston, ON
Internship
Demonstrates initiative and the ability to function both independently and as an inter-professional team member in a crisis and fast paced demanding environment.
Added 48 mins ago
Medical Radiation Technologist (CT & X-Ray)
Stevenson Memorial Hospital
Alliston, ON
Full-time
Member of Ontario Association of Medical Radiation Sciences (OAMRS) recommended.
Added 1 hour ago
Clinic Nurse, CARE Program - BC Women’s Hospital + Health Centre
Provincial Health Services Authority
Vancouver, BC
Part-time
As a member of the CARE Team, provides patient care through the provision of education and support to patients in the Program around issues related to their procedure and/or treatment.…
Added 1 hour ago
Clinic Nurse, CARE Program - BC Women’s Hospital + Health Centre
BC Women's Hospital and Health Centre
Vancouver, BC
Full-time
As a member of the CARE Team, provides patient care through the provision of education and support to patients in the Program around issues related to their procedure and/or treatment.…
Added 1 hour ago
Medical Radiation Technologist (CT & X-Ray)
Stevenson Memorial Hospital
Alliston, ON
Full-time
Member of Ontario Association of Medical Radiation Sciences (OAMRS) recommended.
Added 2 hours ago
Regional Sourcing Manager (Electronics Lane)
Husky Technologies
Bolton, ON
Full-time
Act as the primary contact and relationship manager while supporting the global strategic sourcing team to develop, prioritize, and execute “in-region” sourcing initiatives that reduce…
Added 2 hours ago
Quality Technician
Husky Technologies
Bolton, ON
Full-time
…career development opportunities and a chance to be a part of a team that is the best in the world at what we do. APPLY TODAY – join the Husky…
Added 2 hours ago
Designer, Development (Service)
Husky Technologies
Bolton, ON
Full-time
Husky TechnologiesTM is an exciting company with tremendous potential. We have a great team and great expectations. If you are attracted to bold goals, believe in uncompromising honesty,…
Added 2 hours ago
Medical Device Regulatory Specialist
Corvita Biomedical
Toronto, ON
Full-time
…underserved communities, rural areas, and humanitarian settings. As a member of our team, you'll have the unique opportunity to directly impact infant mortality rates and health outcomes on…
Added 2 hours ago
CNC Machinist - Rotational Shifts only + Benefits package + Paid time off +Shift Premium+ RRSP benefits
Husky Technologies
Bolton, ON
Full-time
Investigate and perform root cause analysis on non-conformance and scrap events. Communicate as required with Team Leader, Quality Analyst and Programming support on findings and correct…
Added 2 hours ago
Senior Recruiter
Husky Technologies
Bolton, ON
Full-time
Husky TechnologiesTM is an exciting company with tremendous potential. We have a great team and great expectations. If you are attracted to bold goals, believe in uncompromising honesty,…
Added 2 hours ago
Internal Auditor (Business Control & IT)
Husky Technologies
Bolton, ON
Full-time
Husky TechnologiesTM is an exciting company with tremendous potential. We have a great team and great expectations. If you are attracted to bold goals, believe in uncompromising honesty,…
Added 2 hours ago
CNC Machinist - Rotational Shifts only + Benefits package + Paid time off +Shift Premium+ RRSP benefits
Husky Technologies
Bolton, ON
Full-time
Investigate and perform root cause analysis on non-conformance and scrap events. Communicate as required with Team Leader, Quality Analyst and Programming support on findings and correct…
Added 2 hours ago
Product Development Engineer|
Husky Technologies
Bolton, ON
Full-time
Husky TechnologiesTM is an exciting company with tremendous potential. We have a great team and great expectations. If you are attracted to bold goals, believe in uncompromising honesty,…
Added 2 hours ago
Senior Pension Fund Administrator - 12-month contract
Ontario Teachers' Pension Plan
Toronto, ON
Full-time
Communicate status to cross-functional departments such as the Financial Operations team to advise on available funds for investment deals
Added 2 hours ago
Personal Banking Associate
TD
Fort Erie, ON
Full-time
…products and services to refer customers to the appropriate team member or internal Bank partner, while ensuring a positive customer…
Added 2 hours ago
University Co-Op Student - Facilities & Operations - 12 Months - Winter 2027 - Markham
Hydro One Networks Inc
Markham, ON
You will be a member of the Facilities & Operations team, which is responsible for:

Corvita Biomedical

Electrical Engineer

Toronto, ON, Canada

Job type: Full-time
Apply by: Mar 20, 2027
Posting language: English
Posted: Sep 21, 2026

Apply About employer

Applications open in a new tab.

Original job description

Electrical Engineer

Company: Corvita Biomedical Inc.

Location: Greater Toronto Area, Ontario, Canada

Employment: Full-time, permanent

Experience: Typically 1 to 2 years of relevant product-development experience

Reports to: Head of Engineering

Start date: As soon as practical

About Corvita Biomedical

Corvita Biomedical Inc. is a mission-driven medical device startup transforming neonatal healthcare globally. We are developing the ARK Incubator, a portable, AI-powered, dual-infant neonatal life support system designed to democratize access to intensive care for premature and critically ill newborns.

Our technology addresses the global crisis where millions of infants die annually due to lack of access to proper neonatal intensive care, particularly in underserved communities, rural areas, and humanitarian settings. As a member of our team, you'll have the unique opportunity to directly impact infant mortality rates and health outcomes on a global scale.

Role Summary

We are looking for a hands-on Electrical Engineer to develop ARK's electrical architecture and power systems from requirements and circuit design through verification and pilot manufacturing.

The role focuses on power distribution, protection, grounding, battery or backup power, wiring, analog interfaces, sensors, actuators, and electrical safety and EMC preparation. The Embedded Systems Engineer owns MCU-based control PCB implementation and firmware; the two roles work closely on interfaces, board partitioning, reviews, and integrated testing.

Key ResponsibilitiesElectrical architecture power and safety

Translate approved system requirements, operating scenarios, and identified risks into electrical requirements and acceptance criteria.
Develop and maintain the electrical architecture, power budget, grounding approach, isolation strategy, interface definitions, and operating-state assumptions.
Design or specify AC/DC and DC power distribution, protection, battery or backup-power functions, charging, monitoring, and safe source transitions where required.
Incorporate safeguards for overcurrent, overvoltage, overheating, reverse polarity, connection faults, and other identified hazards.

Circuit design and system integration

Design and document power-management, protection, analog, sensing, actuator-drive, interconnect, and mixed-signal circuits within the assigned electrical scope.
Own dedicated power or analog boards when assigned and provide reviewed circuit requirements and constraints to the Embedded Systems Engineer for MCU-based control boards.
Select components based on performance, safety, derating, lifecycle status, availability, lead time, cost, and supply risk.

Prototyping test and verification

Assemble, bring up, test, and troubleshoot prototype circuits, harnesses, power assemblies, and design-representative electronics.
Develop verification methods, fixtures, protocols, acceptance criteria, and reports for assigned electrical requirements.
Use oscilloscopes, power analyzers, electronic loads, logic analyzers, data-acquisition equipment, and other laboratory tools safely and methodically.
Conduct or support power-transition, fault-response, thermal, signal-integrity, grounding, leakage-current, and EMC pre-compliance testing.
Work with external specialists and laboratories to prepare for electrical-safety and EMC evaluation, investigate findings, and verify corrective actions.

Design controls documentation and manufacturing

Maintain traceability from electrical requirements through design outputs, risk controls, reviews, and verification evidence.
Contribute to hazard analysis, design FMEA, component-change assessments, nonconformity investigations, and controlled engineering changes.
Prepare controlled schematics, calculations, interface documents, BOMs, test records, and technical inputs for regulatory documentation.
Apply design-for-manufacturing, design-for-test, and design-for-assembly principles and define production-test requirements.
Work with suppliers, PCB assemblers, cable or harness vendors, and contract manufacturers on quotations, inspection, build documentation, and pilot production.

Collaboration and ownership boundaries

Collaborate with mechanical, embedded, biomedical, software, regulatory, clinical, and operations colleagues during design and integration.
Own the system-level electrical architecture, power, protection, grounding, wiring, and assigned power or analog designs.
The Embedded Systems Engineer owns assigned MCU-based control PCBs, firmware, board bring-up, and embedded production-test implementation. Both roles share reviews and interface decisions.
Communicate electrical risks, assumptions, trade-offs, test results, and decisions clearly to technical and non-technical stakeholders.

Required Qualifications

Bachelor's degree in Electrical Engineering, Electronics Engineering, Computer Engineering, or a related discipline.
Typically 1 to 3 years of experience developing electronics for physical products.
Experience contributing to at least one PCB-based product or substantial subsystem from design through bring-up and verification or manufacturing.
Practical knowledge of analog and digital circuits, power conversion, protection, sensing, or embedded-control interfaces.
Proficiency with a professional schematic and PCB environment such as Altium Designer, KiCad, OrCAD, or an equivalent tool.
Hands-on experience with soldering or rework, laboratory measurement, troubleshooting, and root-cause analysis.
Ability to produce clear schematics, calculations, BOMs, test procedures, test reports, and technical documentation.

Preferred Qualifications

Experience in medical devices, laboratory equipment, aerospace, automotive, or another regulated or safety-critical environment.
Familiarity with medical-device design controls, ISO 14971 risk-management concepts, requirements traceability, and controlled change.
Experience with AC/DC conversion, DC/DC regulation, battery management, backup power, power-source transitions, or low-power architecture.
Familiarity with I2C, SPI, UART, CAN, USB, Ethernet, and embedded hardware interfaces.
Experience designing interfaces for sensors, heaters, motors, fans, valves, or other controlled loads.
Experience with production-test fixtures, PCB assembly partners, pilot builds, component qualification, and failure analysis.
Familiarity with SPICE or another circuit-simulation tool.

What We Offer

Meaningful ownership of defined work in an early-stage medical-device program.
Hands-on exposure to requirements, prototyping, integration, verification, and manufacturing preparation.
Close collaboration with engineering, clinical, quality, regulatory, and manufacturing contributors.
Hybrid work with regular access to Corvita's Greater Toronto Area development environment.
The opportunity to help establish practical engineering processes as the team grows.

How to Apply

Please email the following to [email protected]:

Resume or CV.
A brief cover letter explaining your interest and relevant experience.
An optional portfolio or short description of relevant electronics or power-system projects.

Please do not include confidential or proprietary information from a current or former employer. Applications will be reviewed on a rolling basis until the position is filled.

Apply About employer

More about this job

Responsibilities

The Electrical Engineer will develop the ARK incubator's electrical architecture, power systems, and circuit designs from requirements through to pilot manufacturing. They will also collaborate with cross-functional teams to ensure system integration, safety compliance, and rigorous verification testing.

Requirements

Candidates must hold a bachelor's degree in Electrical, Electronics, or Computer Engineering with 1 to 3 years of relevant product-development experience. Proficiency in PCB design tools and hands-on experience with laboratory measurement and circuit troubleshooting are essential.

Skills

Electrical architecture
Circuit design
Power systems
PCB design
Altium Designer
KiCad
OrCAD
Soldering
Troubleshooting
Root-cause analysis
Analog circuits
Digital circuits
EMC testing
Technical documentation
System integration
Prototyping

Benefits

Meaningful ownership
Hands-on exposure
Collaborative environment
Hybrid work

Visa sponsorship

Not detected in the job text

Keywords

Electrical Engineering
Medical Device
ARK Incubator
Power Distribution
Grounding
Isolation Strategy
Battery Management
PCB
Altium Designer
KiCad
OrCAD
Oscilloscope
Power Analyzer
EMC
Design FMEA
BOM
Regulatory Documentation
ISO 14971
I2C
SPI
UART
CAN
USB
Ethernet
SPICE
Embedded Systems
Prototyping
Verification
Manufacturing
Neonatal Healthcare

Report this job