Find work in Canada.

625,068 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 53 mins ago
M
BSP Software Engineer
MANNARINO
Montreal, QC
- Full-time
We are seeking an experienced BSP Software Engineer to support the development of a next-generation embedded computing platform for an in-flight entertainment system.
Added 53 mins ago
M
Senior Software Engineer
MANNARINO
Montreal, QC
- $140,000 to $175,000 USD / year
- Full-time
We are seeking an experienced Senior Software Engineer to contribute to the development, integration, and delivery of software for in-flight entertainment systems. You will work alongside…
Added 53 mins ago
MS
Phased Array System Engineer
MDA Space
Sainte-Anne-de-Bellevue, QC
- Full-time
MDA is seeking a Phased Array Antenna Systems Engineer to be responsible for the definition, development, design, integration, verification, and test of phased‑array antenna subsystems for…
Added 53 mins ago
MS
Guidance, Navigation & Control (GNC) Systems Engineer
MDA Space
Sainte-Anne-de-Bellevue, QC
- Full-time
MDA is seeking a GNC System Engineer for design, integration, verification, and operational support of GNC subsystems for our current and next‑generation remote sensing and communications…
Added 53 mins ago
MS
Software Integration System Engineer
MDA Space
Sainte-Anne-de-Bellevue, QC
- Full-time
MDA is seeking a Software Integration System Engineer that acts as the bridge between disparate technologies, designing and implementing solutions to merge software, hardware, databases and…
Added 53 mins ago
MS
Satellite & Payload Verification, Validation & Integration Systems Engineer
MDA Space
Sainte-Anne-de-Bellevue, QC
- Full-time
MDA is seeking a Satellite & Payload IVV Engineer to join its System Engineering Department. He/she will lead the end‑to‑end V&V and integration of satellite and payload hardware and…
Added 53 mins ago
MS
Digital Payload System Engineer
MDA Space
Sainte-Anne-de-Bellevue, QC
- Full-time
MDA is seeking a Digital Payload System Engineer for design, integration, verification, and operational support for current and next‑generation earth observation and communications…
Added 53 mins ago
MS
Intermediate Electronics Validation and Test Engineer/Designer
MDA Space
Sainte-Anne-de-Bellevue, QC
- Full-time
The intermediate Electronics Validation and Test Engineer/Designer will be responsible for design, integration and commissioning of specialized electronic test equipment for testing mixed…
Added 1 hour ago
FV
Founder, AI Insurance
Forum Ventures
Canada
- Full-time
Proof of review for professionals: per-matter records proving a licensed lawyer, accountant, engineer, or architect reviewed the AI's work, packaged so coverage holds at renewal
Added 3 hours ago
MS
Guidance, Navigation & Control (GNC) Systems Engineer
MDA Space
Sainte-Anne-de-Bellevue, QC
- Full-time
MDA is seeking a GNC System Engineer for design, integration, verification, and operational support of GNC subsystems for our current and next‑generation remote sensing and communications…
Added 8 hours ago
DA
Senior NPI Engineer
DART Aerospace
Montreal, QC · Greater Montreal Metropolitan Area
- Full-time
We are looking for an experienced Senior New Product Introduction (NPI) Engineer to lead the transition of new aerospace products from concept and design through validation, certification,…
Added 11 hours ago
GF
Structural Analysis Engineer
General Fusion Inc.
Richmond, BC
- Full-time
The Structural Mechanical Engineer / Stress Analyst will be responsible for the structural integrity and dynamic structural performance of large-scale machine systems, with a primary focus…
Added 13 hours ago
L
Murex DevOps
Luxoft
Toronto, ON
- Full-time
As a DevOps Engineer, you will be responsible for designing, building, and operating automated platforms that enable reliable, secure, and scalable delivery of the MX platform across SaaS,…
Added 17 hours ago
A
Senior Data Engineer / BI Specialist – Canada
Amyantek
Canada
- Contract
Improve data quality, validation and reporting accuracy.
Added 21 hours ago
SM
RQ11673 – Report Developer – Junior
S M Software Solutions Inc
Toronto, ON
- Internship
We are seeking a Junior Report Developer / Data Engineer with experience in developing, implementing, and maintaining enterprise data solutions using modern Azure cloud technologies. The…
Added 21 hours ago
SM
RQ11673 – Report Developer – Junior
S M Software Solutions Inc
Toronto, ON
- Internship
We are seeking a Junior Report Developer / Data Engineer with experience in developing, implementing, and maintaining enterprise data solutions using modern Azure cloud technologies. The…
Added 21 hours ago
SM
RQ11673 – Report Developer – Junior
S M Software Solutions Inc
Toronto, ON
- Internship
We are seeking a Junior Report Developer / Data Engineer with experience in developing, implementing, and maintaining enterprise data solutions using modern Azure cloud technologies. The…
Added 21 hours ago
SM
RQ00245 – Machine Learning Engineer – Senior
S M Software Solutions Inc
Toronto, ON
- Full-time
We are seeking a highly skilled Senior Machine Learning Engineer with advanced hands-on experience in Azure Machine Learning, Microsoft Foundry/Azure AI Foundry, Machine Learning Operations…
Added 21 hours ago
SM
RQ00245 – Machine Learning Engineer – Senior
S M Software Solutions Inc
Toronto, ON
- Full-time
We are seeking a highly skilled Senior Machine Learning Engineer with advanced hands-on experience in Azure Machine Learning, Microsoft Foundry/Azure AI Foundry, Machine Learning Operations…
Added 21 hours ago
SM
RQ00245 – Machine Learning Engineer – Senior
S M Software Solutions Inc
Toronto, ON
- Full-time
We are seeking a highly skilled Senior Machine Learning Engineer with advanced hands-on experience in Azure Machine Learning, Microsoft Foundry/Azure AI Foundry, Machine Learning Operations…
Added 1 day ago
KC
Senior Embedded Software Designer
Kepler Communications Inc.
Toronto, ON
- Full-time
We're on the hunt for a top-tier Senior Embedded Software Engineer. Your focus will be on software development and maintenance required for both space and ground-based assets for a growing…
Added 1 day ago
JS
Technical Engineer
JFE Shoji Power Canada Inc.
Burlington, ON
- Full-time
Reporting to the Technical Director, the Technical Engineer is responsible for independently reviewing, validating, and approving technical outputs to ensure accuracy, manufacturability,…
Added 1 day ago
Q
Design Verification Engineer - Memory Subsystem (Vancouver)
Qualcomm
Vancouver, BC
- Full-time
Qualcomm is seeking a motivated and experienced Design Verification Engineer to join its memory subsystem verification team. The successful candidate will be responsible for developing and…
Added 1 day ago
EM
Production Engineer
Evertz Microsystems Limited
Burlington, ON
- Full-time
Added 1 day ago
N
Software Engineer - Backend
Nominal
Montreal, QC
- $179,000 to $250,000 CAD / year
- Full-time
…on-prem, and air-gapped environments. As a Backend Software Engineer, you'll join one of these teams and design and build the distributed infrastructure that powers the telemetry and…

DART Aerospace

Senior NPI Engineer

Greater Montreal Metropolitan Area, QC, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Dec 8, 2026
Experience: Approximately 8–10+ years of relevant engineering experience in product development, mechanical design, NPI, industrialization, or a related field.
Posting language: English
Posted: Nov 8, 2026

Original job description

Senior New Product Introduction (NPI) Engineer

Location: Kirkland, Quebec (Montreal), Canada

Department: Engineering

Employment Type: Full-Time, Permanent

Work Arrangement: 100% On-site

Shape the Future of Aerospace Innovation

At DART Aerospace, we design, manufacture, and certify mission-critical aerospace equipment used by helicopter operators around the world. Our products support demanding missions including aerial firefighting, search and rescue, military, utility, and commercial operations.

With engineering and manufacturing operations across Canada, the United States, the United Kingdom, and Mexico, we continue to invest in the development and industrialization of innovative aerospace products.

We are looking for an experienced Senior New Product Introduction (NPI) Engineer to lead the transition of new aerospace products from concept and design through validation, certification, and production launch.

This is a hands-on engineering role for someone who understands both how to design a strong product and how to make it successfully manufacturable.

What You'll Do

Lead New Product Introduction

Lead engineering activities for new products from concept through production release.
Drive the transition from engineering development into manufacturing.
Apply Design for Manufacturing (DFM) and Design for Assembly (DFA) principles throughout product development.
Identify and resolve manufacturability, cost, quality, and production-readiness issues before launch.
Support prototype builds, pilot production, First Article Inspection (FAI), and production ramp-up.

Design & Develop Aerospace Products

Design and develop mechanical and structural components using SolidWorks.
Create and review 3D models, assemblies, engineering drawings, and technical documentation.
Apply GD&T and tolerance stack-up analysis to ensure robust and manufacturable designs.
Perform engineering calculations and structural assessments.
Use FEA and other engineering analysis tools to support design decisions.
Select appropriate materials and manufacturing processes based on performance, cost, quality, and manufacturability.

Validate & Certify

Develop and support engineering verification, validation, and qualification plans.
Coordinate prototype, laboratory, and field testing activities.
Analyze test results and prepare technical reports.
Support aerospace certification activities and associated engineering documentation.
Contribute to certification programs involving TCCA, FAA, EASA, and STC development, as applicable.

Partner With Manufacturing

Work closely with Manufacturing Engineering, Production, Quality, Supply Chain, Procurement, and Program Management.
Provide hands-on engineering support during prototype and production builds.
Resolve technical and manufacturing issues throughout the product lifecycle.
Support non-conformances, root cause investigations, corrective actions, and engineering changes.
Ensure designs are practical, repeatable, cost-effective, and ready for production.

Provide Technical Leadership

Lead design reviews and contribute to key technical decisions.
Mentor and support junior engineers and designers.
Promote engineering best practices, standardization, and continuous improvement.
Balance technical performance, certification requirements, manufacturing realities, cost, and schedule.

What We're Looking For

Education

Bachelor's degree in Mechanical Engineering, Aerospace Engineering, Manufacturing Engineering, or a related discipline.

Experience

Approximately 8–10+ years of relevant engineering experience in product development, mechanical design, NPI, industrialization, or a related field.
Demonstrated experience taking a product from design or development through prototype, validation, and manufacturing release.
Experience supporting products in a manufacturing environment.
Aerospace experience is strongly preferred.

Technical Skills

Advanced proficiency with SolidWorks or comparable 3D CAD tools.
Strong understanding of:
Mechanical and structural design
DFM / DFA
GD&T
Tolerance stack-up
Engineering drawings
Aerospace or high-performance materials
Manufacturing processes
Prototype and production development
Experience supporting FAI, pilot builds, and production readiness.
Working knowledge of FEA and structural analysis.
Experience with engineering change and root cause processes.

Strong Assets

Experience with FAA, TCCA, or EASA certification requirements.
Experience supporting Supplemental Type Certificate (STC) development.
Experience preparing qualification, verification, validation, or certification documentation.
Previous experience with helicopter equipment, aircraft structures, aerospace components, or other certified aerospace products.

What Will Make You Successful

You are an engineer who can move comfortably between CAD, technical analysis, the prototype floor, and production.

You understand that successful product development does not stop when the design is complete.

You think about how the product will be manufactured, assembled, inspected, tested, certified, and supported.

You bring:

Strong technical judgment and problem-solving skills.
A practical, hands-on engineering mindset.
Strong project management and prioritization skills.
Ability to work across multidisciplinary teams.
Clear communication and technical documentation skills.
Ownership and accountability for engineering deliverables.
Ability to operate effectively in a fast-paced manufacturing environment where priorities can evolve quickly.

Why Join DART Aerospace?

Take ownership of aerospace products from concept through production launch.
Work on mission-critical helicopter equipment used around the world.
Combine product development, mechanical engineering, manufacturing, and certification.
Work directly with engineering and manufacturing teams rather than being isolated from production.
Influence design, manufacturability, quality, cost, and product performance.
Collaborate with international engineering and manufacturing operations.
Mentor engineers and contribute to the evolution of DART's engineering practices.
Receive competitive compensation and a comprehensive benefits package.

About DART Aerospace

DART Aerospace is a global provider of design, manufacturing, certification, and support solutions for the helicopter and aerospace industry.

With more than 1,500 Supplemental Type Certificates (STCs) and customers in more than 120 countries, DART develops mission equipment and aerospace solutions supporting civil, military, aerial firefighting, search and rescue, utility, and other specialized operations.

If you have experience transforming engineering concepts into manufacturable, validated, and certified aerospace products, we want to hear from you.

Apply About employer

More about this job

Responsibilities

Lead aerospace products from concept and design through prototype builds, validation, certification, and production launch, applying manufacturability and assembly principles throughout development. Partner with manufacturing and cross-functional teams to resolve technical issues, support production readiness, and provide technical leadership and mentorship.

Requirements

Requires a bachelor's degree in mechanical, aerospace, manufacturing engineering, or a related discipline, with approximately 8–10+ years of relevant product development, design, NPI, or industrialization experience. Candidates should have advanced 3D CAD skills, strong mechanical and structural design knowledge, and experience taking products through prototyping, validation, and manufacturing release; aerospace certification experience is strongly preferred.

Skills

New Product Introduction
Mechanical Design
SolidWorks
Design for Manufacturing
Design for Assembly
Geometric Dimensioning and Tolerancing
Tolerance Stack-Up Analysis
Finite Element Analysis
Structural Analysis
Aerospace Certification
Product Validation
Manufacturing Industrialization
Root Cause Analysis
Engineering Change Management
First Article Inspection
Technical Leadership

Visa sponsorship

Not detected in the job text

Keywords

New Product Introduction
SolidWorks
Design for Manufacturing
Design for Assembly
Geometric Dimensioning and Tolerancing
Tolerance Stack-Up Analysis
Finite Element Analysis
Structural Assessment
Engineering Drawings
Aerospace Materials
Manufacturing Processes
Prototype Builds
Pilot Production
First Article Inspection
Production Readiness
Verification and Validation
Qualification Testing
Aerospace Certification
TCCA
FAA
EASA
Supplemental Type Certificate
Engineering Change Management
Root Cause Investigation
Corrective Actions
Non-Conformance Management
Industrialization
Mechanical Design
Aerospace Engineering
Manufacturing Engineering

Report this job