Find work in Canada.

318,058 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 12 mins ago
Chemistry Lab Technician RPT
Lambton College
Sarnia, ON
Internship
Added 26 mins ago
Certified Medical Device Reprocessing Technician
Alberta Health Services
Daysland, AB
Part-time
…working order, perform biological, chemical and quality assurance testing and report problems to the supervisor or…
Added 26 mins ago
Certified Medical Device Reprocessing Technician
Alberta Health Services
Grande Prairie, AB
Part-time
…working order, perform biological, chemical and quality assurance testing and report problems to the supervisor or…
Added 26 mins ago
Distribution Design Technician
BC Hydro
Victoria, BC
Full-time
May support and act as a subject matter expert related to the Design Technician role and area of expertise.
Added 2 hours ago
Journeyman HVAC Technician (Sign-on Bonus)
Boardwalk
Calgary, AB
Full-time
Valid Journeyman Certificate as an HVAC Technician, Red Seal is an asset
Added 2 hours ago
Licensed Practical Nurse - Operating Room Technician
Alberta Health Services
Calgary, AB · Greater Calgary Metropolitan Area
Part-time
The Licensed Practical Nurse Operating Room Technician (LPN ORT) assists with assessing, planning, implementing resources and evaluating the perioperative care of the patients in the…
Added 4 hours ago
Supervisor I, Equipment Operator Training and Compliance Officer
City of St. Catharines
St. Catharines, ON
Full-time
Testing and the certification of individuals in accordance with regulatory and/or operational standards to operate specific pieces of equipment.
Added 4 hours ago
Manuf. Support Technician
Husky Technologies
Bolton, ON
Full-time
…environments. If contacted in relation to a job opportunity or testing, you should advise the member of the Talent Acquisition team in a timely fashion of any disabilities that requires…
Added 4 hours ago
Assembly Technician (Contract)
Husky Technologies
Bolton, ON
Full-time
…to determine correct assembly, installation, alignment, and testing…
Added 4 hours ago
Quality Technician
Husky Technologies
Bolton, ON
Full-time
The Quality Technician Level 4 is responsible for performing inspection, testing, and quality assurance activities to ensure materials, components, and finished products meet defined…
Added 4 hours ago
Assembly Technician
Husky Technologies
Bolton, ON
Full-time
…environments. If contacted in relation to a job opportunity or testing, you should advise the member of the Talent Acquisition team in a timely fashion of any disabilities that requires…
Added 4 hours ago
Manuf. Support Technician
Husky Technologies
Bolton, ON
Full-time
…environments. If contacted in relation to a job opportunity or testing, you should advise the member of the Talent Acquisition team in a timely fashion of any disabilities that requires…
Added 4 hours ago
Pharmacy Technician, Pharmacy – Permanent Full-Time (1.0)
CHEO
Ottawa, ON
Full-time
Under a pharmacist’s supervision the Pharmacy Technician:
Added 5 hours ago
Journeyman Instrumentation - Commissioning Experience
PTW Energy Services
Prince Rupert, BC
Full-time
We are seeking a Journeyman Instrumentation Technician to join our team for a Fly In / Fly Out rotation at our Alta Gas site out of Prince Rupert, BC. The Journeyman Instrumentation…
Added 5 hours ago
Mechanical Engineering Technician
Ideal Can
Saint-Apollinaire, QC
Full-time
Under the supervision of the Plant Director, the Mechanical Engineering Technician is responsible for the design, development, maintenance and testing of production equipment related to…
Added 5 hours ago
QAQC Electrician
PTW Energy Services
Langbank, SK
Full-time
We are seeking a QAQC Electrician to join our team in Langbank, SK. This role involves testing and documenting equipment on commercial and industrial projects. Candidates should be a…
Added 5 hours ago
Senior HVAC Controls Technician
Johnson Controls
Calgary, AB
Full-time
Lead system testing, calibration, and validation activities.
Added 6 hours ago
Registered Veterinary Technician (RVT)
P3 Veterinary Partners
Kamloops, BC
Internship
Added 6 hours ago
2627-197 - Learning Commons Assistant – Test Centre Administrator (TS8) - Strait Area Campus
Nova Scotia Community College - NSCC
Port Hawkesbury, NS
Full-time
Administering tests through the Testing Centre. This includes coordinating and scheduling tests, communicating with students and faculty, and test invigilation. NSCC Testing Centres provide…
Added 6 hours ago
OPTICAL TECHNICIAN/OPTICIAN ASSISTANT
Sport Specs & Opticals
Toronto, ON
Full-time
We are seeking a dedicated and detail-oriented Optical Technician/Optician Assistant for a full-time/part time position within our dynamic optical practice. This role is essential in…
Added 6 hours ago
Fuel Injector Technician I
BD Diesel
Abbotsford, BC
Full-time
The Fuel Injector Technician I supports the disassembly, testing, preparation, inspection and packaging of fuel injectors and related components. Working in a fast-paced, team environment,…
Added 6 hours ago
On-Site Hardware Technician - Vancouver BC
Procom
North Vancouver, BC
$48.75 to $65 CAD / hour
Contract
On behalf of our Communications and Control Systems client, Procom is searching for an On-Site Hardware Technician for a permanent role. This position is onsite at our client’s North…
Added 7 hours ago
Field Technician Trainee, Concrete Imaging (NDT)
XRSounder
Mississauga, ON
Full-time
As one of Xradar’s Field Technician Trainee, Concrete Imaging (NDT), you will have the opportunity to gain experience and grow your career in construction. This is a mentally and physically…
Added 8 hours ago
Laboratory Technician 3 - LT3
EORLA - Eastern Ontario Regional Laboratory Association
Ottawa, ON
Temporary
This position is responsible for the collection, receiving, accessioning and preparation of all samples for diagnostic testing and results reporting of clinical samples. The LT3 may also be…
Added 8 hours ago
Service Lube Technician - Sterling Honda
AutoCanada Inc.
Hamilton, ON
$17.95 to $17.96 CAD / hour
Full-time
As an Automotive Technician, your primary responsibilities include diagnosing, testing, and repairing vehicle systems to ensure their security and functionality, using specialized tools and…

Ecolab

Senior Calibration Technician

Calgary, AB, Canada
CAN-Calgary Plant Starfield, Canada

Job type: Full-time
Experience: 5+ years of relevant experience in calibration, metrology, instrumentation, measurement, or a related technical field.
Posting language: English
Posted: Sep 30, 2026

Apply About employer

Applications open in a new tab.

Original job description

Join CoolIT, an Ecolab Company, a global leader in Direct Liquid Cooling technology for data centers, supercomputers, and high-performance computing environments.

We are seeking an experienced Senior Calibration Technician / Calibration Specialist to join our team. This is a mid- to senior-level position for a skilled calibration and metrology professional with strong hands-on experience in the calibration, verification, maintenance, and management of measurement and test equipment.

The successful candidate will be responsible for coordinating and performing calibration activities across the organization, maintaining calibration records and systems, supporting equipment traceability, and ensuring calibration activities meet applicable standards and procedures. The role will also provide technical support and guidance to other team members and work closely with laboratory, engineering, manufacturing, and maintenance teams.

What’s in it For You

Day 1 Coverage: Employer-paid comprehensive benefits, including dental, prescription drug, vision, paramedical coverage, and a $1,000 annual Flexible Spending Account.
RRSP: 2% employer-sponsored contribution.
Enjoy three weeks of vacation, six flex days, and a one-week paid company-wide holiday shutdown.
$1,000 Annual professional development allowance to support your ongoing learning, skill development, and career growth.
Dress for your day in a casual, professional environment.
Work in a hybrid environment.

What You Will Do

Coordinate and manage calibration activities across the organization.
Perform hands-on calibration, verification, and testing of measurement and test equipment according to approved procedures and standards.
Develop, maintain, and standardize calibration procedures and work instructions.
Maintain calibration schedules, equipment records, certificates, and traceability documentation.
Manage calibration software and ensure equipment information is accurately maintained and up to date.
Add and maintain new instruments and equipment within the calibration management system.
Schedule and coordinate external calibration services.
Review external calibration certificates and calibration results for accuracy and compliance.
Identify and manage equipment that is out of tolerance or otherwise unsuitable for use.
Assist with the evaluation and documentation of out-of-tolerance conditions and their potential impact.
Maintain measurement and test equipment in good working condition.
Ensure measurement standards and reference equipment are maintained and appropriately traceable.
Support the development and implementation of calibration methods and technical procedures.

Support internal and external audits related to calibration and metrology.
Investigate calibration-related issues and recommend appropriate corrective actions.
Provide technical guidance and support to junior calibration technicians and other employees.
Support manufacturing, engineering, and maintenance teams with calibration and measurement requirements.
Troubleshoot measurement and instrumentation issues and determine appropriate calibration or verification methods.
Maintain accurate and complete calibration documentation and records.
Identify opportunities to improve calibration processes, efficiency, and reliability.
Perform other calibration and metrology-related duties as required.
Coordinate and manage calibration activities across the organization.
Perform hands-on calibration, verification, and testing of measurement and test equipment according to approved procedures and standards.
Develop, maintain, and standardize calibration procedures and work instructions.
Maintain calibration schedules, equipment records, certificates, and traceability documentation.
Manage calibration software and ensure equipment information is accurately maintained and up to date.
Add and maintain new instruments and equipment within the calibration management system.
Schedule and coordinate external calibration services.
Review external calibration certificates and calibration results for accuracy and compliance.
Identify and manage equipment that is out of tolerance or otherwise unsuitable for use.
Assist with the evaluation and documentation of out-of-tolerance conditions and their potential impact.
Maintain measurement and test equipment in good working condition.
Ensure measurement standards and reference equipment are maintained and appropriately traceable.
Support the development and implementation of calibration methods and technical procedures.

Support internal and external audits related to calibration and metrology.
Investigate calibration-related issues and recommend appropriate corrective actions.
Provide technical guidance and support to junior calibration technicians and other employees.
Support manufacturing, engineering, and maintenance teams with calibration and measurement requirements.
Troubleshoot measurement and instrumentation issues and determine appropriate calibration or verification methods.
Maintain accurate and complete calibration documentation and records.
Identify opportunities to improve calibration processes, efficiency, and reliability.
Perform other calibration and metrology-related duties as required.

Basic Qualifications

Diploma or certificate from a Mechanical Technician/Technologist, Electronic Technician/Technologist, or related technical program; equivalent experience may be considered.
5+ years of relevant experience in calibration, metrology, instrumentation, measurement, or a related technical field.
Strong hands-on experience with calibration and measurement equipment.
Experience working with calibration management software or systems.
Ability to read and interpret technical specifications, procedures, drawings, and equipment manuals.
Strong understanding of measurement principles, tolerances, accuracy, precision, and traceability.
Strong attention to detail and accuracy.
Excellent organizational and time-management skills.
Strong verbal and written communication skills.
Ability to work independently and effectively within a cross-functional team.
Legally authorized to work in Canada without company sponsorship.

Preferred Qualifications

Formal metrology and calibration training or certification.
Experience as a Senior Calibration Technician, Calibration Specialist, Metrology Technician, or equivalent.
Experience managing or coordinating an organizational calibration program.
Working knowledge of ISO/IEC 17025.
Working knowledge of ISO 9001.
Internal Auditor training or certification would be an asset.
Experience working with external calibration laboratories.
Experience supporting audits and maintaining calibration systems within a manufacturing or regulated environment.
Experience mentoring or providing technical direction to junior technicians.
Experience with a broad range of electrical, electronic, mechanical, dimensional, pressure, temperature, or other measurement equipment.

Skills and Competencies

Advanced calibration and metrology skills.
Strong troubleshooting and problem-solving abilities.
High level of accuracy and attention to detail.
Ability to manage multiple calibration priorities and deadlines.
Strong documentation and record-keeping skills.
Ability to independently plan and execute calibration activities.
Strong technical judgment and decision-making skills.
Effective communication and interpersonal skills.
Ability to provide technical guidance and mentorship.
Commitment to safety, accuracy, quality, and continuous improvement.

Experience Level

This position is intended for a mid- to senior-level calibration professional who can work independently, take ownership of calibration activities, troubleshoot technical issues, and contribute to the ongoing development and improvement of the organization's calibration program.
Candidates with 5-7+ years of calibration or metrology experience, or demonstrated senior-level technical experience, are encouraged to apply.

We thank every candidate in advance; however, we will contact only those selected for an interview. Please note: immigration sponsorship is not available for this role.

Successful candidates for this position will be required to undergo background checks, including criminal record checks and education verification.

ABOUT COOLIT, AN ECOLAB COMPANY

Founded in Calgary, Alberta in 2001, CoolIT Systems is the leading Direct Liquid Cooling technology provider for data centers, supercomputers, and desktop computers. We design and manufacture solutions used by the largest tech companies globally.

Recognized as one of “The Americas’ Fastest Growing Companies 2023” by Financial Times and honored with the Deloitte Fast 50 Clean Technology award in 2022, as well as the Deloitte Fast 500 distinction in both 2021 and 2022, CoolIT's rapid growth is capturing global attention.

As demand for generative AI, high-performance computing and cloud solutions rapidly expands, there has never been a more exciting time to join our team.

= position is fully onsite and is not available for remote work

During pre-screening, we may use an AI tool, supported by human oversight, to efficiently manage tasks such as resume screening and/or interview scheduling. All hiring decisions are made by human reviewers.

Successful candidates will be required to undergo pre-hire background checks as a condition of employment.

Apply About employer

More about this job

Responsibilities

The Senior Calibration Technician will coordinate and perform calibration, verification, and maintenance of measurement and test equipment across the organization. They will also provide technical guidance to team members, manage calibration records, and support internal and external audits to ensure compliance with quality standards.

Requirements

Candidates must possess a diploma or certificate in a relevant technical field and at least 5 years of experience in calibration or metrology. Strong hands-on experience with measurement equipment and proficiency in calibration management software are required, along with the ability to work legally in Canada.

Skills

Calibration
Metrology
Instrumentation
Measurement systems
Technical troubleshooting
ISO/IEC 17025
ISO 9001
Quality assurance
Technical documentation
Auditing
Data analysis
Mechanical maintenance
Electronic maintenance
Process improvement
Mentorship

Benefits

Dental coverage
Prescription drug coverage
Vision coverage
Paramedical coverage
Flexible spending account
RRSP contribution
Paid vacation
Flex days
Paid company-wide holiday shutdown
Professional development allowance

Visa sponsorship

Not detected in the job text

Keywords

Calibration
Metrology
Instrumentation
Direct Liquid Cooling
ISO 17025
ISO 9001
Quality Management
Traceability
Measurement Standards
Technical Documentation
Auditing
Manufacturing
Engineering
Data Centers
High-performance computing
Preventive Maintenance
Corrective Actions
Calibration Management System
Mechanical Technician
Electronic Technician
Troubleshooting
Compliance
Precision
Tolerances
Mentorship
Process Improvement
Test Equipment
Verification
Technical Specifications
Laboratory

Report this job