Closed listing
Gréeur (Rigger)- temps partiel
- Montreal, QC, Canada
Part-time
This opening has closed.
The original listing is kept below for reference.
Job details
- Job type
- Part-time
- Closing date
- Posting language
- English · French
- Posted
Similar jobs hiring now
Search current openingsOriginal job description
Archived listing. The details below describe a past opening.
English section of this bilingual listing.
- Certification de base en gréage (Qualified Basic Rigging)
- Certification en levage
- Expérience en utilisation de plate-formes élévatrices
- Expérience en gréage au sol
Rigger
Responsible for performing rigging activities in a Hospitality or convention center environment while upholding safety and quality standards per all trade, ENCORE/property guidelines and SOP’s. Reports to Lead Rigger or Rigging Coordinator or local operations leader.
Key Job Responsibilities
Rigging
- Gather and organize all rigging tools and equipment per event needs.
- Confirm carpet protected as required by local conditions.
- Provide ground rigging support to teams building points from lifts by staging motors and equipment under rig points, handing up motor chain, tools and equipment and spotting lift movements.
- Establish hang-point, connect hoist and attachments to permanent rigging points, connect GAC Flex spanset attachments to truss, connect/run and dress motor cables, run cable picks, ensure safety of scenic elements to hang-points and proper use of all truss protection equipment, inspect all cabling tie-offs.
- Check that all truss bolts are tight and pieces of flown equipment are safetied to truss.
- Support other trades needing help raising gear through use of motor or lift, and check work for safety.
- Remain on site until all motors have been raised to trim.
Safety
- Responsible for observing and maintaining all safety concerns during an event, including escalation of any observations of personnel who are acting in an unsafe manner.
- Ensure the power phasing of motor controller is appropriate to prevent limit switches from being defeated.
- Verify all elements are securely fastened and checked for safety.
- Must secure and maintain proper lift and/or Working At Height certifications as necessary.
- Follow all manufactures recommendations and local conditions when using personnel lifts.
- Riggers must be qualified prior to making any temporary rigging points or any points outside of a protected lift of any kind.
Project Management
- Secure and review advanced rigging plan and execute through Rigging Coordinator/Lead Rigger or other leadership supervision.
- Identify possible rigging obstacles and recommend solutions to resolve issues.
- Assist other technical trades with coordination efforts to execute show plot in harmony with all floor activity.
Maintenance
- Provide ongoing visual inspection of all hardware in use including truss, motors, lighting, sound, projection, and personnel lifts.
- Escalate any problems with hardware and recommend solutions to resolve issues to supervisor.
- High school diploma or experience equivalent
- 500+ hours of onsite rigging experience
- Qualified-Basic Rigging certification
- Lift Certification
- Lift operation experience
- Ground Rigging experience
- Previous experience supervising a rigging team preferred
Read the full bilingual original
Principales responsabilités
Gréage
Responsible for performing rigging activities in a Hospitality or convention center environment while upholding safety and quality standards per all trade, ENCORE/property guidelines and SOP’s. Reports to Lead Rigger or Rigging Coordinator or local operations leader.
Key Job Responsibilities
Rigging
Gréage
- Please see the English version is below*
- Rassembler et organiser tous les outils et équipements de gréage en fonction des besoins de l'événement.
- Confirmer la protection du tapis selon les conditions locales.
- Fournir un soutien en matière de gréage au sol aux équipes construisant des points à partir de plates-formes élévatrices en plaçant les moteurs et l'équipement sous les points d'accrochage, en remettant la chaîne des moteurs, les outils et l'équipement et en repérant les mouvements des plates-formes élévatrices.
- Établir un point d'accrochage, connecter le treuil et les accessoires aux points d'accrochage permanents, connecter les fixations de la travée GAC Flex au pont, connecter/exécuter et habiller les câbles des moteurs, exécuter les pics à câbles, assurer la sécurité des éléments scéniques aux points d'accrochage et l'utilisation correcte de tout l'équipement de protection des ponts, inspecter toutes les attaches de câblage.
- Vérifier que tous les boulons d'un pont soient bien serrés et que les pièces d'équipement suspendues soient bien fixées au pont.
- Apporter du soutien aux autres travailleurs ayant besoin d'aide pour soulever le matériel à l'aide d'un moteur ou d'une plate-forme élévatrice, et vérifier la sécurité du travail.
- Rester sur le site jusqu'à ce que le gréage soit terminé et que le responsable de l'événement (Encore ou un tiers) ait confirmé que le gréage est complété.
- Responsable de l'observation et du maintien de toutes les préoccupations en matière de sécurité pendant un événement, y compris le suivi de toute observation concernant le personnel qui agit d'une manière dangereuse.
- S'assurer que le phasage de l'alimentation du contrôleur de moteur soit adéquat afin d'éviter que les interrupteurs de fin de course ne soient désactivés.
- S'assurer que tous les éléments soient bien fixés et que leur sécurité soit vérifiée.
- Doit obtenir et conserver les certifications appropriées en matière de levage et/ou de protection contre les chutes/travail en hauteur, si nécessaire.
- Suivre toutes les recommandations des fabricants ainsi que les conditions locales lors de l’utilisation d’élévateurs de personnel.
- Les gréeurs doivent être qualifiés avant d'établir tout point d'accrochage temporaire ou tout point à l'extérieur d'un appareil de levage sécurisé de quelque nature que ce soit.
- Obtenir et examiner le plan de gréage avancé et l'exécuter par l'entremise du coordonnateur du gréage, du gréeur en chef ou de toute autre supervision.
- Identifier les obstacles possibles au gréage et recommander des solutions pour résoudre les problèmes.
- Assister les autres corps de métier techniques dans leurs efforts de coordination afin d'exécuter la trame de l'événement en harmonie avec toutes les activités sur le plancher.
- Procéder à une inspection visuelle permanente de tout le matériel utilisé, y compris les ponts, les moteurs, l'éclairage, le son, la projection et les élévateurs de personnel.
- Signaler au superviseur tout problème de matériel et recommander des solutions pour le résoudre.
- Diplôme d'études pertinent à la fonction ou expériences équivalentes
- Plus de 500 heures d'expérience en gréage sur site
- Certification de base en gréage (Qualified Basic Rigging)
- Certification en levage
- Expérience en utilisation de plate-formes élévatrices
- Expérience en gréage au sol
- Expérience préalable en supervision d'une équipe de gréage (de préférence)
Responsible for performing rigging activities in a Hospitality or convention center environment while upholding safety and quality standards per all trade, ENCORE/property guidelines and SOP’s. Reports to Lead Rigger or Rigging Coordinator or local operations leader.
Key Job Responsibilities
Rigging
- Gather and organize all rigging tools and equipment per event needs.
- Confirm carpet protected as required by local conditions.
- Provide ground rigging support to teams building points from lifts by staging motors and equipment under rig points, handing up motor chain, tools and equipment and spotting lift movements.
- Establish hang-point, connect hoist and attachments to permanent rigging points, connect GAC Flex spanset attachments to truss, connect/run and dress motor cables, run cable picks, ensure safety of scenic elements to hang-points and proper use of all truss protection equipment, inspect all cabling tie-offs.
- Check that all truss bolts are tight and pieces of flown equipment are safetied to truss.
- Support other trades needing help raising gear through use of motor or lift, and check work for safety.
- Remain on site until all motors have been raised to trim.
- Responsible for observing and maintaining all safety concerns during an event, including escalation of any observations of personnel who are acting in an unsafe manner.
- Ensure the power phasing of motor controller is appropriate to prevent limit switches from being defeated.
- Verify all elements are securely fastened and checked for safety.
- Must secure and maintain proper lift and/or Working At Height certifications as necessary.
- Follow all manufactures recommendations and local conditions when using personnel lifts.
- Riggers must be qualified prior to making any temporary rigging points or any points outside of a protected lift of any kind.
- Secure and review advanced rigging plan and execute through Rigging Coordinator/Lead Rigger or other leadership supervision.
- Identify possible rigging obstacles and recommend solutions to resolve issues.
- Assist other technical trades with coordination efforts to execute show plot in harmony with all floor activity.
- Provide ongoing visual inspection of all hardware in use including truss, motors, lighting, sound, projection, and personnel lifts.
- Escalate any problems with hardware and recommend solutions to resolve issues to supervisor.
- High school diploma or experience equivalent
- 500+ hours of onsite rigging experience
- Qualified-Basic Rigging certification
- Lift Certification
- Lift operation experience
- Ground Rigging experience
- Previous experience supervising a rigging team preferred
More about this job
Responsibilities
Set up and inspect rigging equipment, hoists, motors, trusses, cables, and suspended event elements while supporting other technical trades. Maintain event-site safety, follow rigging plans and equipment guidance, identify hazards, and report equipment issues to supervisors.
Requirements
Requires a high school diploma or equivalent experience, more than 500 hours of on-site rigging experience, Qualified Basic Rigging certification, lift certification, and lift operation and ground rigging experience. Prior rigging-team supervision is preferred, and appropriate lift and/or work-at-height certifications must be maintained as needed.
Skills
- Rigging
- Ground Rigging
- Rigging Equipment Setup
- Hoist and Motor Operation
- Truss Assembly and Safety
- Cable Management
- Personnel Lift Operation
- Fall Protection
- Work at Height
- Rigging Plan Execution
- Event Coordination
- Safety Inspection
- Equipment Inspection
- Hazard Identification
- Team Supervision
Visa sponsorship
Not detected in the job text
Categories
- Trades
- Security & Safety
- Creative & Media
- Management & Leadership
- Hospitality
Keywords
- Rigging
- Qualified Basic Rigging Certification
- Lift Certification
- Ground Rigging
- Hoists
- Motors
- Motor Controllers
- Trusses
- GAC Flex Spansets
- Cable Picks
- Cable Tie-Offs
- Personnel Lifts
- Fall Protection
- Work at Height
- Rigging Plans
- Event Show Plots
- Scenic Elements
- Lighting
- Sound
- Projection
- Equipment Inspection
- Safety Standards
- Convention Centers
- Event Services