Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 10 mins ago
MG
Small Equipment Mechanic
Magna Golf Club
Aurora, ON
- Full-time
In 2026, the club embarked on an extensive multi-year full bunker renovation project. Doug Carrick is leading the renovation design with Flightline Golf Inc. as the lead contractor. The…
Added 10 mins ago
CO
Plant Electrical and Instrumentation Engineer
City of Medicine Hat
Medicine Hat, AB
- Full-time
Take a lead role in keeping the Power Plant's critical control, electrical, network, and information technology systems reliable, secure, and ready for the future.
Added 11 mins ago
F
Advanced Process Support Engineer, Pumps/Cyclones/Valves
FLSmidth
Timmins, ON
- Full-time
Experience. 3 to 5 years minimum of total experience in mineral processing, with time as a plant metallurgist or in a similar operations-facing process role strongly preferred.
Added 11 mins ago
EF
Executive Director - Disability and Community Services
Edenbridge Family Services Inc
Lethbridge, AB
- Temporary
Edenbridge Family Services Inc.| Lethbridge, Alberta Full-time, permanent | Starting Salary: $90,000 Reports to: Owner/CEO
Added 11 mins ago
CS
Senior Manager, Replenishment Planning
Corby Spirit and Wine Limited
Windsor, ON
- Full-time
Service level, fill rate, on-time-in-full, and OOS results.
Added 11 mins ago
F
Advanced Process Support Engineer, Pumps/Cyclones/Valves
FLSmidth
Calgary, AB · Greater Calgary Metropolitan Area
- Full-time
Experience. 3 to 5 years minimum of total experience in mineral processing, with time as a plant metallurgist or in a similar operations-facing process role strongly preferred.
Added 11 mins ago
JH
Manager, Community Programs
John Howard Society of Victoria
Victoria, BC
- Full-time
John Howard Society of Victoria is looking for an experienced Manager, Community Programs to lead the operations, staff, and performance of our community-based programs.
Added 11 mins ago
F
Advanced Process Support Engineer, Pumps/Cyclones/Valves
FLSmidth
Orillia, ON
- Full-time
Experience. 3 to 5 years minimum of total experience in mineral processing, with time as a plant metallurgist or in a similar operations-facing process role strongly preferred.
Added 11 mins ago
F
Advanced Process Support Engineer, Pumps/Cyclones/Valves
FLSmidth
Vancouver, BC
- Full-time
Experience. 3 to 5 years minimum of total experience in mineral processing, with time as a plant metallurgist or in a similar operations-facing process role strongly preferred.
Added 11 mins ago
F
Advanced Process Support Engineer, Pumps/Cyclones/Valves
FLSmidth
Montreal, QC
- Full-time
Experience. 3 to 5 years minimum of total experience in mineral processing, with time as a plant metallurgist or in a similar operations-facing process role strongly preferred.
Added 11 mins ago
FR
Regional Supervisor
FirstService Residential Canada
Vancouver, BC
- Full-time
As a full-time associate, you will be eligible for employer paid health & dental, time off benefits, access to our Employee Assistance Plan, RRSP matching, and Tuition Reimbursement Program.
Added 11 mins ago
MC
Building Superintendent
Medallion Corporation
London, ON
- Full-time
The Superintendent is responsible for the full oversight of building operations, maintenance, cleanliness, and safety. This role leads on-site maintenance activities, supervises staff…
Added 11 mins ago
R
Compliance and Disputes Specialist
Riipen
Remote, Canada
- $60,000 to $80,000 CAD / year
- Full-time
- Remote
…working independently, following the details wherever they lead, and using sound judgment to navigate situations that aren't always…
Added 11 mins ago
The Karl - Laundry Operations Manager
Northland Properties
Revelstoke, BC
The Laundry Operations Manager oversees all laundry operations, ensuring the highest standards of cleanliness, quality, and efficiency for all linens, uniforms, and guest laundry services.…
Added 11 mins ago
SD
Pharmacist, Hourly Part Time Flexible Shifts Greenlight Requisition
Shoppers Drug Mart
Mississauga, ON
- Part-time
To manage the operations of the Pharmacy while on duty, including providing consultation to both customers and health care providers, practice to full scope in providing professional…
Added 26 mins ago
AR
Restaurant Manager
A&W Restaurants
AB
- Full-time
The Restaurant Manager is responsible for all aspects of restaurant operations including the quality and consistency of the customer experience, adherence to A&W standards, Provincial WCB,…
Added 26 mins ago
SJ
Store Manager - Peoples Jewellers - Champlain Place
Signet Jewelers
Dieppe, NB · Canada - Champlain Place - Dieppe, NB
- Full-time
Reporting to the District Manager (DM), the Store Manager (SM) will lead the day-to-day operations of a single store to achieve all sales, profitability, customer satisfaction, inventory…
Added 41 mins ago
W
Senior Technical Consultant, Environmental Scientist
Worley
AB · Edmonton, AB
- Full-time
…impacted sites, and deliver sustainable outcomes across the full asset lifecycle. As part of our Contaminated Sites team, you will lead environmental assessment, remediation, reclamation,…
Added 41 mins ago
FC
Senior Workday Functional Specialist
Fanshawe College
London, ON
- Full-time
Note: This is for 1 Regular Full-Time vacancy. This position is deemed a critical replacement vacancy.
Added 41 mins ago
FR
Leasing Agent / Assistant Resident Services Manager
FirstService Residential Canada
AB · Edmonton, AB
- Internship
…day-to-day leasing, resident relations, and on-site property…
Added 41 mins ago
BC
Director, Global Markets, Corporate Banking - Commodities
BMO Capital Markets
Toronto, ON
- Full-time
BMO Capital Markets is a leading, full-service financial services provider. We offer corporate and investment banking, treasury management, as well as research and advisory services to…
Added 41 mins ago
OD
Admin Assistant / Front Desk Coordinator (Full-Time)
Open Door Media CA
Kingston, ON
- $22 to $23 CAD / hour
- Full-time
This role manages daily front office operations including answering phones, responding to emails, greeting visitors, scheduling jobs, and supporting bookkeeping functions.
Added 41 mins ago
B
Human Resources Business Partner
Baycrest
Toronto, ON
- Full-time
…leaders in the hospital and Long–Term Care environments to lead employee and labour relation initiatives. You will develop an in-depth understanding of the management operations in order to…
Added 41 mins ago
SO
Director, Operations Accounting
Saturn Oil + Gas Inc.
Calgary, AB
- Full-time
Saturn is seeking a full-time Director, Operations Accounting for our Calgary, Alberta office. Reporting to the Chief Financial Officer, the Director, Operations Accounting leads accounting…
Added 41 mins ago
UO
Clinical Trial Systems Lead, Calgary Centre for Clinical Research
University of Calgary
Calgary, AB
- Full-time
…Medicine invites applications for a Clinical Trial Systems Lead. This Full-time Fixed Term position is for approximately 12 months (based on length of grant funding), with the possibility…

FLSmidth

Advanced Process Support Engineer, Pumps/Cyclones/Valves

Montreal, QC, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Dec 6, 2026
Posting language: English
Posted: Nov 6, 2026

Original job description

Job Purpose

The Advanced Process Support Engineer extends the reach of the Pumps, Cyclones, Valves & Knelson (PCV) Sales and Site Support teams into deeper mineral processing questions at customer operations. Where our Field Service teams focus on mechanical installation and maintenance; APS focuses on how PCV equipment performs within the process: classification efficiency, gravity recovery, circuit balance, as well as pump and cyclone interaction. The role works on site at mine operations across the assigned region, running surveys and simulations, supporting commissioning and troubleshooting from a process perspective, driving adoption of digital products such as Krebs OSA, and turning process findings into performance improvements and commercial opportunities for FLS.

Responsibilities

Process support and optimization. Serve as the technical process resource for Sales and Site Support on grinding, classification, gravity concentration, and slurry transport circuits. Diagnose performance issues and recommend operating and equipment changes that improve throughput, recovery, and wear life.

Circuit surveys and sampling. Plan and execute plant surveys and sampling campaigns, including particle size analysis, density and flow measurement, and mass balancing, to establish baseline performance and quantify the impact of improvements.

Simulations and sizing. Use FLSmidth proprietary software to perform cyclone simulations, pump sizing, and circuit modeling in support of proposals, upgrades, and troubleshooting. Validate results against field data and feed learnings back to product line and applications engineering.

Commissioning and troubleshooting. Support commissioning of new PCV and Knelson installations from a process standpoint, confirming equipment is operating to design. Lead process-side troubleshooting of issues such as cyclone roping, bypass, poor separation, and pump-cyclone mismatch, working alongside Field Service Engineers on mechanical items.

Digital product support. Support deployment, configuration, and customer adoption of Krebs OSA and other PCV digital and monitoring products. Interpret the data these tools generate and translate it into actionable recommendations for site teams.

Gravity concentration (Knelson). Support Knelson gravity concentrator applications, including gravity recoverable gold (GRG) assessment, circuit design review, performance audits, and optimization of existing installations.

Sales support. Partner with the sales team to identify upgrade and competitor-displacement opportunities, build technical value cases backed by survey and simulation data, and support technical proposals and customer presentations.

Customer training. Deliver process-focused training to plant metallurgists and operators on the performance, operation, and optimization of PCV products and digital tools.

Reporting and knowledge sharing. Prepare clear, professional survey, commissioning, and site reports documenting findings and recommendations. Share field learnings with Site Support, Applications Engineering, and product line teams.

Qualifications

Education. Bachelor’s degree in Mineral Processing, Metallurgical, or Chemical Engineering, or a closely related field.

Experience. 3 to 5 years minimum of total experience in mineral processing, with time as a plant metallurgist or in a similar operations-facing process role strongly preferred.

Process knowledge. Solid working knowledge of comminution circuits, slurry transport, and plant performance metrics.

Gravity concentration. Experience with gravity concentration circuits, ideally Knelson concentrators, is a strong asset.

Surveys and data. Hands-on experience planning and running plant surveys, sampling, and mass balancing, with strong data analysis skills in Excel. Experience with process modeling software (JK Sim, etc) preferred. Training on FLSmidth proprietary sizing and simulation software will be provided.

Digital aptitude. Comfort working with process data, instrumentation, and digital monitoring platforms; experience with online analytics or process control systems is a plus.

Equipment familiarity. Working understanding of slurry pumps, hydrocyclones, valves, and gravity concentrators from an operational perspective. Hands-on mechanical expertise is not required.

Communication. Able to work independently, communicate clearly with plant metallurgists, operators, and sales teams, and represent FLSmidth professionally on site.

Travel. Comfortable with frequent travel, expected at 50% to 75% across Canada.

Language. Fluency in English is mandatory. Additional fluency in French preferred.

Competencies and mindset

Curious, analytical problem-solver who connects equipment performance to process outcomes

Customer-focused, credible with site metallurgists and plant management alike

Comfortable working independently in remote and demanding site environments

Commercially aware, able to turn technical findings into a clear customer value case

Committed to a safety-first culture on every site

What We Offer

Competitive pay with performance-based incentives

RRSP matching program

Full health and dental benefits

Generous time off (vacation, sick leave, flexible start/stop)

Long-term stability with a company that has been around for 140+ years

Opportunities for technical training, advancement, and growth

Development and training within a respected global OEM company 

Employee Assistance Program for employees and immediate family

As an equal opportunity employer, FLSmidth embraces diversity and equality by promoting an environment of inclusion. We encourage applicants of all backgrounds and perspectives to apply. The more diverse our employees are, the stronger our team is.

In our commitment to equal opportunity and eliminating bias, we kindly request that you exclude personal information such as age, ethnicity, number of children, and photographs from your application materials.

Kindly note that we will review applications and interview actively, so please apply as soon as possible. We will contact candidates via email. No recruiters and unsolicited agency referrals please.

We offer all employees access to a dedicated recognition platform, empowering you to celebrate achievements, share appreciation and stay connected globally.

We offer all employees access to a dedicated recognition platform, empowering you to celebrate achievements, share appreciation and stay connected globally.

Apply About employer

More about this job

Responsibilities

Provide process-focused support for pumps, cyclones, valves, and Knelson equipment through plant surveys, simulations, commissioning, troubleshooting, and optimization. Support digital product adoption, customer training, technical sales opportunities, and reporting of performance recommendations.

Requirements

Requires a bachelor’s degree in mineral processing, metallurgical, chemical, or a closely related engineering field, and at least 3–5 years of mineral processing experience. Candidates should have practical experience with plant surveys, sampling, mass balancing, process data analysis, and relevant circuits, and be willing to travel 50%–75% across Canada.

Skills

Mineral Processing
Process Optimization
Plant Surveys and Sampling
Mass Balancing
Cyclone Simulation
Pump Sizing
Circuit Modeling
Gravity Concentration
Knelson Concentrators
Slurry Transport
Process Data Analysis
Troubleshooting
Commissioning
Digital Monitoring
Customer Training
Technical Sales Support

Benefits

Performance-Based Incentives
RRSP Matching Program
Health and Dental Benefits
Paid Vacation
Sick Leave
Flexible Start and Stop Times
Technical Training and Career Development
Employee Assistance Program
Employee Recognition Platform

Visa sponsorship

Not detected in the job text

Keywords

Mineral Processing
Pumps
Hydrocyclones
Valves
Knelson Concentrators
Grinding Circuits
Classification
Gravity Concentration
Slurry Transport
Plant Surveys
Sampling Campaigns
Particle Size Analysis
Density Measurement
Flow Measurement
Mass Balancing
Cyclone Simulation
Pump Sizing
Circuit Modeling
JK Sim
Excel
Krebs OSA
Digital Monitoring
Process Control Systems
Commissioning
Troubleshooting
Gravity Recoverable Gold
Performance Audits
Process Optimization
Customer Training
Technical Proposals

Report this job