Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 13 mins ago
CS
Senior Analyst, Replenishment Planning (Import)
Corby Spirit and Wine Limited
Windsor, ON
- Full-time
Independently develop short- and mid-term replenishment plans using demand, inventory, open orders, lead times, production availability, and inventory policies.
Added 13 mins ago
S
Utilities Engineer (Senior) - ALTO Project / Cadence
SYSTRA
Montreal, QC
- Full-time
Lead the design and technical review of municipal water distribution, sanitary sewer, and stormwater systems, including extensions, connections, relocations, and upgrades.
Added 13 mins ago
BC
Project Associate (Permanent)
Babcock Canada Inc.
Victoria, BC
- Full-time
Provide administrative support to the Document Control Team in the Marine & Mission Systems Project Management Office (PMO) by:
Added 13 mins ago
MG
Small Equipment Mechanic
Magna Golf Club
Aurora, ON
- Full-time
…leading the renovation design with Flightline Golf Inc. as the lead contractor. The bunker renovation will incorporate the Better Billy Bunker drainage system along with Pro Angle Bunker…
Added 13 mins ago
CO
Plant Electrical and Instrumentation Engineer
City of Medicine Hat
Medicine Hat, AB
- Full-time
Take a lead role in keeping the Power Plant's critical control, electrical, network, and information technology systems reliable, secure, and ready for the future.
Added 13 mins ago
TE
Cost Controller
TC Energy
NB · Chiasson Office, NB
- Full-time
Knowledgeable and experienced with cost engineering principles and methods including budgeting and forecasting, change management, management systems/procedures, Cost and Work Breakdown…
Added 13 mins ago
F
Advanced Process Support Engineer, Pumps/Cyclones/Valves
FLSmidth
Timmins, ON
- Full-time
…data and feed learnings back to product line and applications…
Added 13 mins ago
CS
Senior Manager, Replenishment Planning
Corby Spirit and Wine Limited
Windsor, ON
- Full-time
Own domestic Net Requirements and ensure alignment among demand, inventory, production plans, capacity, lead times, sourcing rules, and financial priorities.
Added 13 mins ago
F
Advanced Process Support Engineer, Pumps/Cyclones/Valves
FLSmidth
Calgary, AB · Greater Calgary Metropolitan Area
- Full-time
…data and feed learnings back to product line and applications…
Added 13 mins ago
CS
Senior Analyst, Replenishment Planning (Bailment)
Corby Spirit and Wine Limited
Windsor, ON
- Full-time
Analyze demand, supply, lead times, capacity, safety stock, and policy parameters and recommend changes supported by business impact.
Added 13 mins ago
CS
Manager, Replenishment Planning
Corby Spirit and Wine Limited
Windsor, ON
- Full-time
Lead scenario development and recommend actions for constrained supply, allocation, inventory rebalancing, OOS recovery, and business-priority changes.
Added 13 mins ago
CS
Analyst, Replenishment Planning
Corby Spirit and Wine Limited
Windsor, ON
- Full-time
Prepare and validate demand, inventory, open-order, lead-time, production, and planning data used in monthly Net Requirements.
Added 13 mins ago
F
Advanced Process Support Engineer, Pumps/Cyclones/Valves
FLSmidth
Orillia, ON
- Full-time
…data and feed learnings back to product line and applications…
Added 13 mins ago
F
Advanced Process Support Engineer, Pumps/Cyclones/Valves
FLSmidth
Vancouver, BC
- Full-time
…data and feed learnings back to product line and applications…
Added 13 mins ago
F
Advanced Process Support Engineer, Pumps/Cyclones/Valves
FLSmidth
Montreal, QC
- Full-time
…data and feed learnings back to product line and applications…
Added 13 mins ago
J
Commercial Manager
Jacobs
Toronto, ON
- $160,000 to $210,000 CAD / year
- Full-time
…infrastructure challenges. From transportation and transit systems to large-scale capital delivery programs, our teams deliver sustainable solutions that improve communities and create…
Added 13 mins ago
AC
Full-time Enterprise CRM Integration Specialist
Algonquin College of Applied Arts and Technology
Ottawa, ON
- Full-time
The Enterprise CRM Integration Specialist works with business clients, the CRM Technical Lead, the CRM Architect, and ITS teams to define integration requirements and data flows; evaluate…
Added 13 mins ago
WS
Human Resources Business Partner
Wolf Steel Ltd
Barrie, ON
- Full-time
Napoleon leads the way with innovative engineering, advanced manufacturing techniques, unsurpassed customer service and remarkable product quality. Our award-winning products offer a…
Added 28 mins ago
BC
Project Associate (Permanent)
Babcock Canada Inc.
Ottawa, ON
- Full-time
Provide administrative support to the Document Control Team in the Marine & Mission Systems Project Management Office (PMO) by:
Added 28 mins ago
BC
Project Associate (Permanent)
Babcock Canada Inc.
Halifax, NS
- Full-time
Provide administrative support to the Document Control Team in the Marine & Mission Systems Project Management Office (PMO) by:
Added 28 mins ago
J
Conveyance Engineer (Water/Wastewater)
Jacobs
Burnaby, BC
- $95,000 to $135,000 CAD / year
- Full-time
…innovative and sustainable solutions for critical infrastructure systems across…
Added 28 mins ago
Responsable produit / Product Manager
OPAL-RT
Montreal, QC
Added 28 mins ago
B
Lead Developer - (Java / AWS / Payment Systems)
BMO
Toronto, ON · BMOPLACE
- Full-time
Strong hands-on experience in enterprise software engineering, including senior or lead-level development responsibility
Added 43 mins ago
V|
Spécialiste mise en route / Commissioning Specialist
Veolia | North America
Montreal, QC
- Full-time
…troubleshooting of drinking water, wastewater and process water treatment systems in municipal, industrial and mining…
Added 43 mins ago
AC
Application Engineer
Atlas Copco Group
Montreal, QC
- Full-time
Minimum 5years’ experience in an engineering or technical commercial position (Project Engineering delivering technical systems, Application Engineer).

FLSmidth

Advanced Process Support Engineer, Pumps/Cyclones/Valves

Montreal, QC, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Dec 6, 2026
Posting language: English
Posted: Nov 6, 2026

Original job description

Job Purpose

The Advanced Process Support Engineer extends the reach of the Pumps, Cyclones, Valves & Knelson (PCV) Sales and Site Support teams into deeper mineral processing questions at customer operations. Where our Field Service teams focus on mechanical installation and maintenance; APS focuses on how PCV equipment performs within the process: classification efficiency, gravity recovery, circuit balance, as well as pump and cyclone interaction. The role works on site at mine operations across the assigned region, running surveys and simulations, supporting commissioning and troubleshooting from a process perspective, driving adoption of digital products such as Krebs OSA, and turning process findings into performance improvements and commercial opportunities for FLS.

Responsibilities

Process support and optimization. Serve as the technical process resource for Sales and Site Support on grinding, classification, gravity concentration, and slurry transport circuits. Diagnose performance issues and recommend operating and equipment changes that improve throughput, recovery, and wear life.

Circuit surveys and sampling. Plan and execute plant surveys and sampling campaigns, including particle size analysis, density and flow measurement, and mass balancing, to establish baseline performance and quantify the impact of improvements.

Simulations and sizing. Use FLSmidth proprietary software to perform cyclone simulations, pump sizing, and circuit modeling in support of proposals, upgrades, and troubleshooting. Validate results against field data and feed learnings back to product line and applications engineering.

Commissioning and troubleshooting. Support commissioning of new PCV and Knelson installations from a process standpoint, confirming equipment is operating to design. Lead process-side troubleshooting of issues such as cyclone roping, bypass, poor separation, and pump-cyclone mismatch, working alongside Field Service Engineers on mechanical items.

Digital product support. Support deployment, configuration, and customer adoption of Krebs OSA and other PCV digital and monitoring products. Interpret the data these tools generate and translate it into actionable recommendations for site teams.

Gravity concentration (Knelson). Support Knelson gravity concentrator applications, including gravity recoverable gold (GRG) assessment, circuit design review, performance audits, and optimization of existing installations.

Sales support. Partner with the sales team to identify upgrade and competitor-displacement opportunities, build technical value cases backed by survey and simulation data, and support technical proposals and customer presentations.

Customer training. Deliver process-focused training to plant metallurgists and operators on the performance, operation, and optimization of PCV products and digital tools.

Reporting and knowledge sharing. Prepare clear, professional survey, commissioning, and site reports documenting findings and recommendations. Share field learnings with Site Support, Applications Engineering, and product line teams.

Qualifications

Education. Bachelor’s degree in Mineral Processing, Metallurgical, or Chemical Engineering, or a closely related field.

Experience. 3 to 5 years minimum of total experience in mineral processing, with time as a plant metallurgist or in a similar operations-facing process role strongly preferred.

Process knowledge. Solid working knowledge of comminution circuits, slurry transport, and plant performance metrics.

Gravity concentration. Experience with gravity concentration circuits, ideally Knelson concentrators, is a strong asset.

Surveys and data. Hands-on experience planning and running plant surveys, sampling, and mass balancing, with strong data analysis skills in Excel. Experience with process modeling software (JK Sim, etc) preferred. Training on FLSmidth proprietary sizing and simulation software will be provided.

Digital aptitude. Comfort working with process data, instrumentation, and digital monitoring platforms; experience with online analytics or process control systems is a plus.

Equipment familiarity. Working understanding of slurry pumps, hydrocyclones, valves, and gravity concentrators from an operational perspective. Hands-on mechanical expertise is not required.

Communication. Able to work independently, communicate clearly with plant metallurgists, operators, and sales teams, and represent FLSmidth professionally on site.

Travel. Comfortable with frequent travel, expected at 50% to 75% across Canada.

Language. Fluency in English is mandatory. Additional fluency in French preferred.

Competencies and mindset

Curious, analytical problem-solver who connects equipment performance to process outcomes

Customer-focused, credible with site metallurgists and plant management alike

Comfortable working independently in remote and demanding site environments

Commercially aware, able to turn technical findings into a clear customer value case

Committed to a safety-first culture on every site

What We Offer

Competitive pay with performance-based incentives

RRSP matching program

Full health and dental benefits

Generous time off (vacation, sick leave, flexible start/stop)

Long-term stability with a company that has been around for 140+ years

Opportunities for technical training, advancement, and growth

Development and training within a respected global OEM company 

Employee Assistance Program for employees and immediate family

As an equal opportunity employer, FLSmidth embraces diversity and equality by promoting an environment of inclusion. We encourage applicants of all backgrounds and perspectives to apply. The more diverse our employees are, the stronger our team is.

In our commitment to equal opportunity and eliminating bias, we kindly request that you exclude personal information such as age, ethnicity, number of children, and photographs from your application materials.

Kindly note that we will review applications and interview actively, so please apply as soon as possible. We will contact candidates via email. No recruiters and unsolicited agency referrals please.

We offer all employees access to a dedicated recognition platform, empowering you to celebrate achievements, share appreciation and stay connected globally.

We offer all employees access to a dedicated recognition platform, empowering you to celebrate achievements, share appreciation and stay connected globally.

Apply About employer

More about this job

Responsibilities

Provide process-focused support for pumps, cyclones, valves, and Knelson equipment through plant surveys, simulations, commissioning, troubleshooting, and optimization. Support digital product adoption, customer training, technical sales opportunities, and reporting of performance recommendations.

Requirements

Requires a bachelor’s degree in mineral processing, metallurgical, chemical, or a closely related engineering field, and at least 3–5 years of mineral processing experience. Candidates should have practical experience with plant surveys, sampling, mass balancing, process data analysis, and relevant circuits, and be willing to travel 50%–75% across Canada.

Skills

Mineral Processing
Process Optimization
Plant Surveys and Sampling
Mass Balancing
Cyclone Simulation
Pump Sizing
Circuit Modeling
Gravity Concentration
Knelson Concentrators
Slurry Transport
Process Data Analysis
Troubleshooting
Commissioning
Digital Monitoring
Customer Training
Technical Sales Support

Benefits

Performance-Based Incentives
RRSP Matching Program
Health and Dental Benefits
Paid Vacation
Sick Leave
Flexible Start and Stop Times
Technical Training and Career Development
Employee Assistance Program
Employee Recognition Platform

Visa sponsorship

Not detected in the job text

Keywords

Mineral Processing
Pumps
Hydrocyclones
Valves
Knelson Concentrators
Grinding Circuits
Classification
Gravity Concentration
Slurry Transport
Plant Surveys
Sampling Campaigns
Particle Size Analysis
Density Measurement
Flow Measurement
Mass Balancing
Cyclone Simulation
Pump Sizing
Circuit Modeling
JK Sim
Excel
Krebs OSA
Digital Monitoring
Process Control Systems
Commissioning
Troubleshooting
Gravity Recoverable Gold
Performance Audits
Process Optimization
Customer Training
Technical Proposals

Report this job