Find work in Canada.

592,775 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 11 mins ago
CC
Bilingual Commercial Sales Consultant- Hybrid
Canon Canada
Montreal, QC
- $83,127 to $88,721 CAD / year
- Full-time
As a Bilingual Commercial Sales Consultant reporting to the Sales Manager, Emerging & Key Accounts, you will be the primary point of contact for small-to-medium-sized businesses within a…
Added 11 mins ago
CO
Registered Practical Nurse(s) - Weekends
City of Greater Sudbury
Sudbury, ON · Greater Sudbury, ON
- Internship
A vulnerable sector check is required for this position and will be requested by the Hiring Manager should you be the candidate of choice. Please do not submit your vulnerable sector check…
Added 11 mins ago
NM
Shop Foreperson
Nelson Motors and Equipment
Avonlea, SK
- Full-time
As a working Shop Foreperson, you'll collaborate closely with our Service Manager, Service Writer, and Service Technicians to maintain a high performing, efficient, customer focused service…
Added 11 mins ago
NM
Parts Lead
Nelson Motors and Equipment
Radville, SK
- Full-time
…honesty, appreciation, motivation, and partnerships. Supporting community is important to us as is employee development and training opportunities. By joining Nelson Motors and Equipment,…
Added 11 mins ago
IW
Senior Manager, Solution Architect 1
IG Wealth Management
ON · Ontario, Canada
- Full-time
Join our team to engage in continuous learning and skill development in a supportive environment. Experience the best of both worlds with our hybrid work environment, where you spend three…
Added 11 mins ago
NM
Parts Lead
Nelson Motors and Equipment
Avonlea, SK
- Full-time
…honesty, appreciation, motivation, and partnerships. Supporting community is important to us as is employee development and training opportunities. By joining Nelson Motors and Equipment,…
Added 11 mins ago
B
Property Manager
BGIS
MB · Manitoba, Canada
- Full-time
The Property Manager position supports and assists in the management of commercial real estate in accordance with the Management Agreements. The Property Manager is involved in all aspects…
Added 11 mins ago
CO
Registered Practical Nurse(s)
City of Greater Sudbury
Sudbury, ON · Greater Sudbury, ON
- Internship
A vulnerable sector check is required for this position and will be requested by the Hiring Manager should you be the candidate of choice. Please do not submit your vulnerable sector check…
Added 11 mins ago
CM
Media Associate, Investment
Critical Mass
Toronto, ON
- Full-time
…and the collaboration between media syndication and creative development. You bring a passion for Media to the office, and your enthusiastic personality makes you keen to offer insights…
Added 11 mins ago
IW
Senior Manager, Solution Architect 1
IG Wealth Management
MB · Manitoba, Canada
- Full-time
Join our team to engage in continuous learning and skill development in a supportive environment. Experience the best of both worlds with our hybrid work environment, where you spend three…
Added 11 mins ago
BI
Broadcast Manager – Dead by Daylight
Behaviour Interactive
Montreal, QC
- Full-time
As a Broadcast Manager, you will lead the planning, production, and execution of high-impact livestreams and video content that engage the Dead by Daylight player community, amplify brand…
Added 11 mins ago
SH
Quality and Patient Safety Leader
Scarborough Health Network
Toronto, ON · Scarborough, ON
- Full-time
…and surrounding communities to the east. We are proud to be a community-affiliated teaching site for the University of Toronto and partner with a number of other universities and colleges,…
Added 11 mins ago
HC
Audiologist/ Registered Hearing Instrument Practitioner - Prince George, BC
HearingLife Canada
Prince George, BC
- Full-time
Reporting to our Regional Manager, you will be responsible for delivering excellent client care demonstrated by performing the following duties and responsibilities:
Added 11 mins ago
KP
Digital Graphic Designer - Competition ID: 4803
Kwantlen Polytechnic University
Surrey, BC
- Full-time
…excellence, applied learning, innovation, and strong industry and community partnerships, KPU prepares students for meaningful…
Added 11 mins ago
CL
Compensation and People Analytics Specialist
Community Living BC
Vancouver, BC
- Full-time
Community Living British Columbia (CLBC) is a Crown corporation responsible for arranging supports and services for adults with developmental disabilities and their families. CLBC staff…
Added 11 mins ago
AC
Full-time Student Success Specialist
Algonquin College of Applied Arts and Technology
Ottawa, ON
- Full-time
Reporting to the Associate Chair or Academic Manager, the Student Success Specialist plays a vital part in a student's academic success and is an important position in the strategic…
Added 11 mins ago
OM
Sr. Campaign Manager, Social
Omnicom Media
Toronto, ON
- Full-time
As a Sr. Campaign Manager, Paid Social , you will own the execution and performance of paid social campaigns across key platforms including Meta, TikTok, Snapchat, LinkedIn, Reddit, and…
Added 11 mins ago
NM
Parts Lead
Nelson Motors and Equipment
Estevan, SK
- Full-time
…honesty, appreciation, motivation, and partnerships. Supporting community is important to us as is employee development and training opportunities. By joining Nelson Motors and Equipment,…
Added 11 mins ago
NM
Parts Lead
Nelson Motors and Equipment
Redvers, SK
- Full-time
…honesty, appreciation, motivation, and partnerships. Supporting community is important to us as is employee development and training opportunities. By joining Nelson Motors and Equipment,…
Added 11 mins ago
NM
Parts Lead
Nelson Motors and Equipment
Oxbow, SK
- Full-time
…honesty, appreciation, motivation, and partnerships. Supporting community is important to us as is employee development and training opportunities. By joining Nelson Motors and Equipment,…
Added 11 mins ago
Agency Partner Manager
Reddit
Toronto, ON
As an Agency Development Partnerships Manager at Reddit, you will play a key role on the Agency Development Team, working with the Agency Leads, the world’s largest Holding Companies and…
Added 11 mins ago
R
Employment Resource Supervisor
Reena
Thornhill, ON
- $71,500 CAD / year
- Full-time
…individuals with diverse abilities supported by Reena and from the community at large. This role advocates for community inclusion through employment by building effective partnerships with…
Added 11 mins ago
Branch Manager, Vancouver
Odlum Brown
Vancouver, BC
…firm continues its tradition of leadership in the financial community as one of BC’s most respected investment…
Added 11 mins ago
Cultural Support Worker (Granville Gates Supportive Housing)
Connective
Vancouver, BC
Works directly with additional staff (i.e., Social Workers and Outreach Workers), community service and support providers, government and non-government organizations, and First Nations…
Added 11 mins ago
DA
Automotive Parts Advisor
Dueck Auto Group
Vancouver, BC
- Full-time
…company, we have a long-standing commitment to supporting the community. Our organization currently employs over 400 hard-working and dedicated individuals. We encourage career growth…

Fluor Corporation

Principal Process Engineer - Power Projects

Calgary, AB, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Dec 4, 2026
Experience: Minimum 15 years of relevant engineering experience, including substantial experience with gas-turbine-based power projects.
Posting language: English
Posted: Nov 4, 2026

Original job description

Fluor is one of Canada's top employers and is recognized globally as a leader in the Engineering, Procurement, Construction, Fabrication, and Maintenance industry. Our focus on innovation and providing cost-effective technology-based solutions is second to none. As we look to the future, we need creative, ambitious, and innovative professionals who can help us fulfill our purpose to Build a Better World.

Fluor team members are at the heart of our success in executing projects safely, thoughtfully, and with the highest quality. If you value teamwork, empowerment in your career, and are eager to champion innovative and sustainable solutions to our clients, this opportunity just may be for you!

Job Description

The Principal Process Engineer – Power Projects provides process and thermal-cycle engineering leadership for gas-turbine-based simple-cycle, combined-cycle, and cogeneration projects, proposals, and studies. The role combines subject-matter expertise, project execution leadership, and business development support. The successful candidate will develop and optimize competitive plant configurations, lead process engineering execution, advise clients and project teams, and help shape practical, lean execution strategies for power projects from early development through commissioning. The position is primarily office-based, with periodic travel to client offices, supplier facilities, and/or project sites.

Key Responsibilities

Lead process engineering for power-project studies, feasibility work, configuration studies, FEED, proposals, and EPC execution.
Develop and recommend cost-effective plant configurations for simple-cycle, combined-cycle, and cogeneration facilities, including gas turbine, HRSG, steam turbine, condenser, cooling, fuel gas, water/steam, and related balance-of-plant systems.
Develop and optimize thermal-cycle models and plant performance using Thermoflow GTPRO/GTMASTER or equivalent tools; interpret model outputs and communicate design trade-offs clearly.
Lead the preparation and review of heat and material balances, process flow diagrams, utility summaries, equipment and line design criteria, process datasheets, control philosophies, operating narratives, and performance calculations.
Establish process design bases, margins, guarantees, and interfaces; support performance testing requirements and application of relevant performance test codes.
Provide technical leadership to multidisciplinary engineering teams and coordinate closely with mechanical, piping, electrical, instrumentation and controls, civil/structural, procurement, construction, and commissioning functions.
Plan process-engineering work, develop estimates and schedules, forecast staffing, assign and check work, monitor progress, and deliver within scope, budget, schedule, and quality requirements.
Review supplier proposals and technical data; support major-equipment selection, technical bid evaluations, vendor alignment, and flow-down of performance and schedule requirements.
Identify technical and execution risks and develop practical mitigation strategies, including those associated with performance guarantees, schedule guarantees, and major equipment interfaces.
Support commissioning, start-up, performance testing, troubleshooting, and resolution of field issues, as required.
Serve as a power-process subject-matter expert, provide technical guidance and quality oversight, and mentor less-experienced engineers.
Support business development and proposal preparation by developing technical approaches, execution strategies, estimates, schedules, and proposal narratives.
Participate in client presentations and technical discussions, provide high-value advice during project development, and build trusted relationships with clients, licensors, suppliers, and partners.
Promote fit-for-purpose, lean work processes appropriate to the power market while maintaining applicable quality, safety, regulatory, and company requirements.

Basic Job Requirements

Accredited bachelor’s degree, or global equivalent, in Chemical or Mechanical Engineering.
Minimum 15 years of relevant engineering experience, including substantial experience with gas-turbine-based power projects.
Demonstrated experience leading process engineering for simple-cycle, combined-cycle, and/or cogeneration projects through study, FEED, proposal, or EPC phases.
Strong knowledge of power-plant thermal cycles and the integration of gas turbines, HRSGs, steam turbines, condensers, cooling systems, fuel systems, and associated balance-of-plant systems.
Hands-on capability in power-cycle configuration, modelling, and optimization using Thermoflow software or equivalent.
Ability to lead technical work, resolve complex problems, make sound independent recommendations, and manage multiple priorities within demanding project schedules.
Effective written, verbal, presentation, and client-facing communication skills.
Ability to work effectively with clients, suppliers, contractors, management, and multidisciplinary project teams.
Working knowledge of applicable engineering codes, standards, regulatory requirements, and industry practices.

Other Job Requirements

Preferred Qualifications

Professional Engineer registration, or eligibility for registration, in Canadian provinces.
Experience with major gas turbine OEM suppliers and familiarity with current gas turbine classes and product offerings.
Experience with industrial steam hosts and integration of cogeneration facilities with refinery, petrochemical, mining, or other industrial processes.
Field experience in construction, commissioning, start-up, operations, and/or performance testing.
Experience supporting competitive lump-sum EPC proposals and understanding of power-market contracting strategies, commercial terms, and execution risks.
Experience with emissions-control systems, grid and electrical-study interfaces, water treatment, air-cooled or water-cooled condensing systems, and decarbonization options applicable to power generation.
Previous experience as a Process Lead, Area Lead, Engineering Manager, or comparable technical leadership role.

Fluor Canada rewards hard work, knowledge, and commitment. Fluor offers competitive employee compensation packages, comprehensive benefit programs including Health, Dental and Vision Care, flexible spending dollars, group registered retirement program, parental top-up, education reimbursement, employee and family assistance programs, and much more. Fluor also offers several employee resource groups that aim to provide opportunities for professional and personal growth, improved wellness, and involvement in the community.

At Fluor, we believe that overall wellness encompasses the four wellness pillars of mental, physical, financial and social. Upon these pillars we are committed to fostering a healthy, inclusive and psychologically safe workplace by creating awareness through knowledge building and communication while focusing on measurable outcomes.

Compressed work schedule: The Fluor Canada offices work a compressed work schedule offering every second Friday off.

Salary is based upon experience.

The market rate for the role is typically at the mid-point of the salary range; however, variations in final salary are determined by additional factors such as the candidate’s qualifications, relevant years of experience, geographic location, internal pay equity, and prevailing market conditions for the specific role.

Fluor uses artificial intelligence (AI) in its hiring process to review applications and identify qualified candidates. More information including contact information is available in our Applicant Notice when creating a profile on our recruiting platform.

Notice to Candidates: As required by some of our clients and projects, to the extent allowed by law, offers may be conditional upon consent and clearance of a satisfactory background check which could include, but is not limited to, a criminal records check, and confirmation of education, professional registration, employment history, and references.

While only qualified candidates will be contacted for an interview, be sure to continually check our website for other related positions as they are posted. Are you ready to join us? We are looking forward to hearing from you today!

Apply About employer

More about this job

Responsibilities

Lead process and thermal-cycle engineering for power projects from studies and proposals through FEED, EPC execution, commissioning, and performance testing. Develop and optimize plant configurations, guide multidisciplinary teams, manage technical delivery and risks, advise clients, and support business development.

Requirements

Requires an accredited bachelor's degree in Chemical or Mechanical Engineering and at least 15 years of relevant engineering experience, including substantial gas-turbine power project experience. Candidates need strong thermal-cycle and balance-of-plant knowledge, hands-on Thermoflow or equivalent modeling capability, technical leadership skills, and effective client-facing communication; Canadian professional engineering registration and related field or proposal experience are preferred.

Skills

Process Engineering Leadership
Power Plant Thermal-Cycle Engineering
Gas Turbine Power Projects
Combined-Cycle and Cogeneration Systems
Thermoflow Modeling
Plant Configuration and Optimization
Heat and Material Balances
Process Flow Diagrams
Equipment Selection and Technical Bid Evaluation
Multidisciplinary Engineering Coordination
Project Planning and Scheduling
Performance Guarantees and Testing
Commissioning and Start-Up
Risk Mitigation
Client and Supplier Relations
Proposal Development

Benefits

Health Care
Dental Care
Vision Care
Flexible Spending Account
Group Retirement Program
Parental Top-Up
Education Reimbursement
Employee and Family Assistance Program
Employee Resource Groups
Compressed Work Schedule

Visa sponsorship

Not detected in the job text

Keywords

Gas Turbines
Simple-Cycle Power Plants
Combined-Cycle Power Plants
Cogeneration
Heat Recovery Steam Generators
Steam Turbines
Thermoflow GTPRO
Thermoflow GTMASTER
Thermal-Cycle Modeling
Heat and Material Balances
Process Flow Diagrams
Balance of Plant
FEED
EPC
Performance Guarantees
Performance Testing
Technical Bid Evaluations
Commissioning
Start-Up
Emissions Control
Water Treatment
Decarbonization
Professional Engineer Registration
Power-Plant Engineering
Project Risk Management
Lump-Sum EPC Proposals
Gas Turbine OEMs
Industrial Steam Integration
Engineering Codes and Standards

Report this job