Find work in Canada.

592,775 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 10 mins ago
FA
Vice President, Quality Control
FTAI Aviation
Montreal, QC
- Full-time
Oversee non-destructive testing (NDT), dimensional inspection and borescope programs, including technician qualification and equipment calibration.
Added 10 mins ago
P
Full Stack Engineer, Storefront
Pepper
Remote, Canada
- $149,000 to $164,000 CAD / year
- Full-time
- Remote
As an engineer on the Storefront team, you'll work on Pepper's flagship product: the e-commerce system distributors run their business on and their customers order through every day. Tens…
Added 25 mins ago
OC
Mechanical Engineer - SABRE (Permanent)
Orano Canada
SK · Saskatchewan, Canada
- Full-time
A university degree in Engineering; mining specialization is preferred. Registered or eligible to be registered as a Professional Engineer in Saskatchewan with APEGS
Added 25 mins ago
OC
Mechanical Engineer - SABRE
Orano Canada
SK · Saskatchewan, Canada
- $118,350 to $139,200 CAD / year
- Full-time
A university degree in Engineering; mining specialization is preferred. Registered or eligible to be registered as a Professional Engineer in Saskatchewan with APEGS
Added 25 mins ago
EC
Automotive Engineer
Experis Canada
Windsor, ON
- Contract
Points for all programs. The engineer will clearly document issues in PITS or GIM and provide Validation Project Chief all DVP&R results and open issues found. The validation engineer…
Added 25 mins ago
S
Senior Electrical Engineer- Water
Stantec
Calgary, AB
- Full-time
We are currently seeking a passionate Senior Electrical Engineer to join our project delivery team: The same team that is tasked with delivering some of the most interesting and iconic…
Added 25 mins ago
WW
Electronic Hardware Developer II
Watts Water Technologies
Vernon, BC · Tekmar Control Systems
- Full-time
As a Junior Electronics Engineer/Technologist, you'll work alongside experienced engineers on everything from schematic design and PCB layout to prototype assembly, testing, product…
Added 40 mins ago
TS
Building Automation Systems (BAS) Engineer/Technician
TalentSphere Staffing Solutions
Toronto, ON
- Full-time
Perform point-to-point checks, functional testing, and system verification.
Added 40 mins ago
HT
Manufacturing Engineer (Contract)
Husky Technologies
Bolton, ON
- Full-time
We have an opening for a Mechanical / Manufacturing Engineer working with our Manufacturing Engineering Team as outlined below:
Added 40 mins ago
W
Co-op Student, Wireless Communication
WorkSafeBC
Richmond, BC
- Full-time
…and death in British Columbia. You will partner with a senior engineer to exercise fundamental skills project management, technical research and evaluation, and communication. If time and…
Added 40 mins ago
SG
Application Support
Societe Generale
Montreal, QC
- Full-time
You have at least one experience in a financial institution as Software Engineer
Added 40 mins ago
E
Ingénieur.e Instrumentation et contrôle - Instrumentation & Control Engineer (I&C Engineer)
Excelpro
Montreal, QC
- Full-time
As an Engineer, your primary responsibility will be to deliver various automation projects for our clients. More specifically, you will:
Added 40 mins ago
LC
Staff Data Engineer - Retail Media Platform
Loblaw Companies Limited
Toronto, ON
- Full-time
As a Staff Data Engineer on the Retail Media Platform team, you will lead the design and evolution of large-scale data platforms and backend systems supporting measurement, reporting,…
Added 1 hour ago
MC
Senior QA Engineer III – Automation | Banking | API | Kafka | ETL (35729)
Myticas Consulting
Ottawa, ON
- Full-time
Demonstrated ability to operate at a Senior QA Engineer / QA Engineer III level, independently owning complex testing and automation deliverables.
Added 1 hour ago
MC
Senior Cybersecurity Test Engineer (35651)
Myticas Consulting
Ottawa, ON
- Contract
We are seeking a Senior Cybersecurity Test Engineer to lead and execute security testing activities across applications, infrastructure, cloud environments, APIs, and system integrations.…
Added 1 hour ago
MC
Network Engineer (35135)
Myticas Consulting
Ottawa, ON
- Full-time
We are looking for an experienced Network Service Engineer with strong expertise in customer network service configuration to support the design, implementation, and optimization of network…
Added 1 hour ago
MC
Senior Embedded Software Firmware Engineer (35835)
Myticas Consulting
Ottawa, ON
- Contract
We are seeking a Senior Embedded Software/Firmware Engineer to develop and test next-generation firmware for advanced embedded optical systems. This is a one-year contract based in Ottawa,…
Added 1 hour ago
MC
Staff Embedded Software Firmware Engineer (35836)
Myticas Consulting
Ottawa, ON
- Contract
We are seeking a Staff Embedded Software/Firmware Engineer to design, develop, and test mission-critical firmware components for advanced embedded optical systems. This is a one-year…
Added 1 hour ago
MC
Principal Embedded Software Firmware Engineer (35837)
Myticas Consulting
Ottawa, ON
- Contract
Principal Embedded Software/Firmware Engineer
Added 1 hour ago
BP
Senior Java Developer
BNP Paribas
Montreal, QC
- Full-time
Prime Services Technology is seeking a Senior Java Engineer in Montreal to design and deliver reliable, scalable distributed systems. This is a hands-on senior individual contributor role…
Added 1 hour ago
FC
Principal Process Engineer - Power Projects
Fluor Corporation
Calgary, AB
- Full-time
The Principal Process Engineer – Power Projects provides process and thermal-cycle engineering leadership for gas-turbine-based simple-cycle, combined-cycle, and cogeneration projects,…
Added 1 hour ago
UO
Research Engineer
University of British Columbia
Kelowna, BC · UBCO | Engineering, Management and Education Building (EME)
- $6,631.67 to $9,533.25 CAD / month
- Full-time
…slitting, stacking, electrolyte filling, sealing, formation, and…
Added 1 hour ago
Project Engineer – Capital Projects & Optimization
Wayfinder Corporation
Glenevis, AB
Reporting to the Project Champion, the Project Engineer - Capital Projects & Optimization provides engineering oversight and hands-on execution support for facility development, capital…
Added 1 hour ago
HA
Intern Bachelors Embedded Eng
Honeywell Aerospace
Ottawa, ON · Kanata, ON
- Full-time
The successful candidate will join the Honeywell Aerospace SATCOM Software Development Team as an Embedded Engineer Intern. In this role, the primary responsibility will be to develop…
Added 1 hour ago
HA
Intern Bachelors Systems Eng
Honeywell Aerospace
Ottawa, ON · Kanata, ON
- Full-time
The successful candidate will join the Honeywell Aerospace SATCOM System Integration and Test Team as a Systems Engineer Intern. In this role, the primary responsibility will be to…

Fluor Corporation

Principal Process Engineer - Power Projects

Calgary, AB, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Dec 4, 2026
Experience: Minimum 15 years of relevant engineering experience, including substantial experience with gas-turbine-based power projects.
Posting language: English
Posted: Nov 4, 2026

Original job description

Fluor is one of Canada's top employers and is recognized globally as a leader in the Engineering, Procurement, Construction, Fabrication, and Maintenance industry. Our focus on innovation and providing cost-effective technology-based solutions is second to none. As we look to the future, we need creative, ambitious, and innovative professionals who can help us fulfill our purpose to Build a Better World.

Fluor team members are at the heart of our success in executing projects safely, thoughtfully, and with the highest quality. If you value teamwork, empowerment in your career, and are eager to champion innovative and sustainable solutions to our clients, this opportunity just may be for you!

Job Description

The Principal Process Engineer – Power Projects provides process and thermal-cycle engineering leadership for gas-turbine-based simple-cycle, combined-cycle, and cogeneration projects, proposals, and studies. The role combines subject-matter expertise, project execution leadership, and business development support. The successful candidate will develop and optimize competitive plant configurations, lead process engineering execution, advise clients and project teams, and help shape practical, lean execution strategies for power projects from early development through commissioning. The position is primarily office-based, with periodic travel to client offices, supplier facilities, and/or project sites.

Key Responsibilities

Lead process engineering for power-project studies, feasibility work, configuration studies, FEED, proposals, and EPC execution.
Develop and recommend cost-effective plant configurations for simple-cycle, combined-cycle, and cogeneration facilities, including gas turbine, HRSG, steam turbine, condenser, cooling, fuel gas, water/steam, and related balance-of-plant systems.
Develop and optimize thermal-cycle models and plant performance using Thermoflow GTPRO/GTMASTER or equivalent tools; interpret model outputs and communicate design trade-offs clearly.
Lead the preparation and review of heat and material balances, process flow diagrams, utility summaries, equipment and line design criteria, process datasheets, control philosophies, operating narratives, and performance calculations.
Establish process design bases, margins, guarantees, and interfaces; support performance testing requirements and application of relevant performance test codes.
Provide technical leadership to multidisciplinary engineering teams and coordinate closely with mechanical, piping, electrical, instrumentation and controls, civil/structural, procurement, construction, and commissioning functions.
Plan process-engineering work, develop estimates and schedules, forecast staffing, assign and check work, monitor progress, and deliver within scope, budget, schedule, and quality requirements.
Review supplier proposals and technical data; support major-equipment selection, technical bid evaluations, vendor alignment, and flow-down of performance and schedule requirements.
Identify technical and execution risks and develop practical mitigation strategies, including those associated with performance guarantees, schedule guarantees, and major equipment interfaces.
Support commissioning, start-up, performance testing, troubleshooting, and resolution of field issues, as required.
Serve as a power-process subject-matter expert, provide technical guidance and quality oversight, and mentor less-experienced engineers.
Support business development and proposal preparation by developing technical approaches, execution strategies, estimates, schedules, and proposal narratives.
Participate in client presentations and technical discussions, provide high-value advice during project development, and build trusted relationships with clients, licensors, suppliers, and partners.
Promote fit-for-purpose, lean work processes appropriate to the power market while maintaining applicable quality, safety, regulatory, and company requirements.

Basic Job Requirements

Accredited bachelor’s degree, or global equivalent, in Chemical or Mechanical Engineering.
Minimum 15 years of relevant engineering experience, including substantial experience with gas-turbine-based power projects.
Demonstrated experience leading process engineering for simple-cycle, combined-cycle, and/or cogeneration projects through study, FEED, proposal, or EPC phases.
Strong knowledge of power-plant thermal cycles and the integration of gas turbines, HRSGs, steam turbines, condensers, cooling systems, fuel systems, and associated balance-of-plant systems.
Hands-on capability in power-cycle configuration, modelling, and optimization using Thermoflow software or equivalent.
Ability to lead technical work, resolve complex problems, make sound independent recommendations, and manage multiple priorities within demanding project schedules.
Effective written, verbal, presentation, and client-facing communication skills.
Ability to work effectively with clients, suppliers, contractors, management, and multidisciplinary project teams.
Working knowledge of applicable engineering codes, standards, regulatory requirements, and industry practices.

Other Job Requirements

Preferred Qualifications

Professional Engineer registration, or eligibility for registration, in Canadian provinces.
Experience with major gas turbine OEM suppliers and familiarity with current gas turbine classes and product offerings.
Experience with industrial steam hosts and integration of cogeneration facilities with refinery, petrochemical, mining, or other industrial processes.
Field experience in construction, commissioning, start-up, operations, and/or performance testing.
Experience supporting competitive lump-sum EPC proposals and understanding of power-market contracting strategies, commercial terms, and execution risks.
Experience with emissions-control systems, grid and electrical-study interfaces, water treatment, air-cooled or water-cooled condensing systems, and decarbonization options applicable to power generation.
Previous experience as a Process Lead, Area Lead, Engineering Manager, or comparable technical leadership role.

Fluor Canada rewards hard work, knowledge, and commitment. Fluor offers competitive employee compensation packages, comprehensive benefit programs including Health, Dental and Vision Care, flexible spending dollars, group registered retirement program, parental top-up, education reimbursement, employee and family assistance programs, and much more. Fluor also offers several employee resource groups that aim to provide opportunities for professional and personal growth, improved wellness, and involvement in the community.

At Fluor, we believe that overall wellness encompasses the four wellness pillars of mental, physical, financial and social. Upon these pillars we are committed to fostering a healthy, inclusive and psychologically safe workplace by creating awareness through knowledge building and communication while focusing on measurable outcomes.

Compressed work schedule: The Fluor Canada offices work a compressed work schedule offering every second Friday off.

Salary is based upon experience.

The market rate for the role is typically at the mid-point of the salary range; however, variations in final salary are determined by additional factors such as the candidate’s qualifications, relevant years of experience, geographic location, internal pay equity, and prevailing market conditions for the specific role.

Fluor uses artificial intelligence (AI) in its hiring process to review applications and identify qualified candidates. More information including contact information is available in our Applicant Notice when creating a profile on our recruiting platform.

Notice to Candidates: As required by some of our clients and projects, to the extent allowed by law, offers may be conditional upon consent and clearance of a satisfactory background check which could include, but is not limited to, a criminal records check, and confirmation of education, professional registration, employment history, and references.

While only qualified candidates will be contacted for an interview, be sure to continually check our website for other related positions as they are posted. Are you ready to join us? We are looking forward to hearing from you today!

Apply About employer

More about this job

Responsibilities

Lead process and thermal-cycle engineering for power projects from studies and proposals through FEED, EPC execution, commissioning, and performance testing. Develop and optimize plant configurations, guide multidisciplinary teams, manage technical delivery and risks, advise clients, and support business development.

Requirements

Requires an accredited bachelor's degree in Chemical or Mechanical Engineering and at least 15 years of relevant engineering experience, including substantial gas-turbine power project experience. Candidates need strong thermal-cycle and balance-of-plant knowledge, hands-on Thermoflow or equivalent modeling capability, technical leadership skills, and effective client-facing communication; Canadian professional engineering registration and related field or proposal experience are preferred.

Skills

Process Engineering Leadership
Power Plant Thermal-Cycle Engineering
Gas Turbine Power Projects
Combined-Cycle and Cogeneration Systems
Thermoflow Modeling
Plant Configuration and Optimization
Heat and Material Balances
Process Flow Diagrams
Equipment Selection and Technical Bid Evaluation
Multidisciplinary Engineering Coordination
Project Planning and Scheduling
Performance Guarantees and Testing
Commissioning and Start-Up
Risk Mitigation
Client and Supplier Relations
Proposal Development

Benefits

Health Care
Dental Care
Vision Care
Flexible Spending Account
Group Retirement Program
Parental Top-Up
Education Reimbursement
Employee and Family Assistance Program
Employee Resource Groups
Compressed Work Schedule

Visa sponsorship

Not detected in the job text

Keywords

Gas Turbines
Simple-Cycle Power Plants
Combined-Cycle Power Plants
Cogeneration
Heat Recovery Steam Generators
Steam Turbines
Thermoflow GTPRO
Thermoflow GTMASTER
Thermal-Cycle Modeling
Heat and Material Balances
Process Flow Diagrams
Balance of Plant
FEED
EPC
Performance Guarantees
Performance Testing
Technical Bid Evaluations
Commissioning
Start-Up
Emissions Control
Water Treatment
Decarbonization
Professional Engineer Registration
Power-Plant Engineering
Project Risk Management
Lump-Sum EPC Proposals
Gas Turbine OEMs
Industrial Steam Integration
Engineering Codes and Standards

Report this job