Find work in Canada.

593,801 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 52 mins ago
W
Principal Mechanical Engineer
Worley
Calgary, AB · Edmonton, AB
- Full-time
Lead and approve engineering deliverables for static equipment, including specifications, data sheets, material requisitions, technical bid evaluations, and purchase recommendations.
Added 52 mins ago
W
Principal Piping Engineer
Worley
Calgary, AB · Edmonton, AB
- Full-time
Serve as the Piping Engineering discipline lead on medium to large projects, providing technical direction and oversight to teams of piping engineers and designers.
Added 52 mins ago
F
Lead Building Services Design Engineer
Fluor
Vancouver, BC
- Full-time
This is the Lead position on assigned projects or performs engineering assignments of any complexity and perform all or some of the following:
Added 52 mins ago
F
Supervisor, Material Management
Fluor
Vancouver, BC
- Full-time
This position serves as a Project Material Manager on small Engineering, Procurement, Fabrication, and Construction (EPFC) projects or may serve as a regional lead for non-project…
Added 52 mins ago
F
Principal Process Engineer - Power Projects
Fluor
Calgary, AB
- Full-time
The Principal Process Engineer – Power Projects provides process and thermal-cycle engineering leadership for gas-turbine-based simple-cycle, combined-cycle, and cogeneration projects,…
Added 52 mins ago
U
Directeur principal, Ingénierie logicielle – WFM / Sr Dir. Software Development - WFM
UKG
Montreal, QC
- Full-time
Added 52 mins ago
S
DCN Project Cost Analyst
SLB
Calgary, AB
- Full-time
SLB is seeking a motivated Cost Controller to support our Data Center infrastructure solutions business.
Added 52 mins ago
S
DCN Document Controller
SLB
Calgary, AB
- Full-time
This role within the project office requires daily coordination with engineering, construction, and supply chain teams. It involves detailed document handling, data entry, and participation…
Added 52 mins ago
S
DCN Project Controls System Analyst
SLB
Calgary, AB
- Full-time
Lead continuous improvement initiatives focused on standardization, process optimization, data quality enhancement, user acceptance testing (UAT), and release management.
Added 52 mins ago
S
DCN Project Scheduler
SLB
Calgary, AB
- Full-time
…ongoing progress and forecast completion across all phases of Data Center projects. The Project Scheduler works closely with construction, engineering, supply chain, and project controls…
Added 1 hour ago
AI
Senior Level 3 AI Engineer – Copilot, ChatGPT, Grok, Claude & Gemini
Astra-North Infoteck Inc. ~ Conquering today’s challenges, achieving tomorrow’s vision!
Montreal, QC
- Full-time
We are seeking a Senior Level 3 AI Engineer to act as the first point of call for engineering issues across end user AI products - Microsoft Copilot, OpenAI ChatGPT, Anthropic Claude, Grok…
Added 1 hour ago
AI
Senior Database Administrator (Oracle Application DBA / Cloud)
Astra-North Infoteck Inc. ~ Conquering today’s challenges, achieving tomorrow’s vision!
Toronto, ON
- Full-time
…applications. This role partners closely with development and engineering teams to ensure high availability, optimal SQL/PL-SQL performance, and smooth database operations, while helping…
Added 1 hour ago
MC
Director, FinOps (35690)
Myticas Consulting
BC · British Columbia, Canada
- Full-time
We are seeking an experienced Director, FinOps (Cloud Financial Management) to build, lead, and mature an enterprise FinOps program focused on delivering measurable and sustainable cloud…
Added 1 hour ago
MC
Senior Enterprise Information Data Architect (35902)
Myticas Consulting
Canada
- Contract
This role requires someone who can bridge enterprise information architecture and practical data engineering. The ideal candidate will bring deep experience in enterprise data modelling,…
Added 1 hour ago
U
Directeur principal, Ingénierie logicielle – WFM / Sr Dir. Software Development - WFM
UKG
Montreal, QC
- Full-time
Added 1 hour ago
B
Senior Databricks Data Platform Engineer
Brillio
Canada
- Contract
As a Senior Databricks Data Platform Engineer, you will own the engineering, automation, and day-to-day health of our enterprise Databricks Lakehouse platform. This is a platform-first…
Added 1 hour ago
J
DevOps Technical Lead / Architect - Azure & Terraform
Jobgether
Canada
- $150,000 to $165,000 CAD / year
- Full-time
We are seeking an experienced DevOps leader to guide platform engineering and modernize a .NET-based insurance platform hosted in Azure. You will work closely with technology leadership to…
Added 1 hour ago
MC
Technical Consultant III (35732)
Myticas Consulting
Toronto, ON
- Full-time
This is a hands-on senior technical leadership role combining software engineering, solution design, product configuration, APIs and integrations, data, deployment, troubleshooting,…
Added 1 hour ago
1
Product Builder / Senior Product Engineer - AI Products
15Rock
Toronto, ON
- Full-time
On a drone assembly line, parts spent 99.8% of their lead time waiting. Our redesigned layout is modeled to roughly triple throughput.
Added 1 hour ago
RS
VRF & Ductless Technical Support Representative
Refrigerative Supply Limited
Abbotsford, BC · Burnaby, BC · Coquitlam, BC · Langley (District), BC · Vancouver, BC · Langley, BC
- Full-time
Review recorded Data from contractors with RSL lead tech support staff.
Added 1 hour ago
EG
Senior Municipal Engineer
Egis Group
Calgary, AB · Toronto, Ontario
- $130,000 to $170,000 CAD / year
- Full-time
Lead and Manage the civil roadway components of major projects from inception to completion (this could include, but is not limited to, highway facilities ranging from freeways, urban and…
Added 1 hour ago
B
Project Financial Controller - – Consulting Engineering
BPA
Laval, QC
- Full-time
Lead the financial oversight of a portfolio of engineering projects throughout their full lifecycle;
Added 1 hour ago
AB
New Product Development (NPD) Coordinator
Applied Biological Materials Inc
Richmond, BC
- $50,000 to $60,000 CAD / year
- Contract
…discovery. Our technologies and product portfolio include cell engineering, CRISPR gene editing, induced pluripotent stem cells (iPSCs), stem cell differentiation, organoids, and advanced…
Added 1 hour ago
BT
Senior Director, Technical Development Lead, Device
BlueRock Therapeutics
Toronto, ON
- Full-time
Founded in 2016, BlueRock is at the forefront of the convergence of cell biology and genetic engineering. Our mission is to harness pluripotent stem cell technology and gene editing to…
Added 1 hour ago
BT
Director, Supply Chain
BlueRock Therapeutics
Toronto, ON
- Full-time
Lead GMP materials management operations, including inventory control, warehousing, replenishment strategies, master data governance, and transactional compliance.

Fluor

Lead Building Services Design Engineer

Vancouver, BC, Canada

Salary Range: $118,000.00 - $218,000.00 · Full-time

Apply About employer

Applications open in a new tab.

Job details

Pay: Salary Range: $118,000.00 - $218,000.00
Job type: Full-time
Posting language: English
Posted: Oct 6, 2026

Original job description

Fluor is one of Canada's top employers and is recognized globally as a leader in the Engineering, Procurement, Construction, Fabrication, and Maintenance industry. Our focus on innovation and providing cost-effective technology-based solutions is second to none. As we look to the future, we need creative, ambitious, and innovative professionals who can help us fulfill our purpose to Build a Better World.

Fluor team members are at the heart of our success in executing projects safely, thoughtfully, and with the highest quality. If you value teamwork, empowerment in your career, and are eager to champion innovative and sustainable solutions to our clients, this opportunity just may be for you!

Job Description

The purpose of this position is to provide the essential administrative processes, technical knowledge, and direction as listed. This position has oversight of a specific area, and acts as a representative to the department ensuring technical accuracy in project execution in all phases. This role has the responsibility to promote Fluor’s competitiveness within the global marketplace by delivering quality services of unmatched value and technical competence.

This is the Lead position on assigned projects or performs engineering assignments of any complexity and perform all or some of the following:

Organize/plan jobs, write/review specifications, prepare/maintain schedules, develop/monitor estimates and manpower forecasts, assign work, work with p project/client/field, material procurement, permit, and subcontract activities
Prepare and perform schedules, estimates, progress reports, material forecasts, meetings, procurement activities, etc.
Assist in audits
Assist, as required, in the development of department standards and procedures
Utilize vendor data and work with personnel from other disciplines as required for the performance of designs
Perform squad check of vendor data and drawings from other disciplines
Travel, as required, to ensure the successful execution of project and/or department goals
Develop client relations
Other duties as assigned
Capable of taking a project from green-field to as-built, including:
Analyze the fire hazards and determine the scope of fire protection required
Estimate fire flow rates and pressures for all areas
Produce a design criteria and discuss alternatives with the insurance underwriters
Design clean agent extinguishing, foam systems, deluge, wet and dry s sprinklers, standpipes, fire water pumps
Produce drawings reflecting the designs for either: A) design build contractor to install, or B) a contractor to install
Check contractor drawings and vendor submittals for compliance with codes, standards and project requirements
Capable of taking a project from green-field to as-built, including:
Design HVAC systems for process buildings, electrical buildings, administration buildings
Analyze the HVAC requirements
Determine the scope of HVAC required
Produce a design criteria,
Estimate HVAC flow rates and equipment power for all areas
Create HVAC specifications,
Perform technical bid evaluations for HVAC equipment
Check contractor drawings and vendor submittals for compliance with codes, standards and project requirements
Capable of taking a project from green-field to as-built, including:
Design dust collection systems for mineral processing plants
Analyze the dust collection requirements
Determine the scope of dust collection required
Produce a design criteria
Estimate dust collection flow rates and equipment power for all areas
Create dust collection specifications
Perform technical bid evaluations for dust collection equipment
Check contractor drawings and vendor submittals for compliance with codes, standards and project requirements

Basic Job Requirements

An accredited 4-year bachelor’s degree, or equivalent, in Engineering Technology.
- 10 years of related experience.
- Previous EPCM experience as asset.
- Excellent communication skills
- Excellent team player but also able to work independently

- Registration or eligibility for registration, with the Engineers and Geoscientists BC as a professional registrant is mandatory

Specific Fire Protection Requirements
• A member or eligible to be a member of NFPA, or SFPE
• Working knowledge of North American fire codes and NFPA standards
• Working knowledge of FM and IRI requirements
• Industrial projects - minimum 5 years’ experience
• Hands-on hydraulic calculations

Specific HVAC Requirements
• A member of ASHRAE
• Working knowledge of North American HVAC codes/standards
• Industrial projects - minimum 5 years’ experience
• Hands-on heating and cooling calculations
• Plumbing knowledge is an asset

Specific Dust Control Requirements
• Working knowledge of North American codes/standards
• Industrial projects - minimum 5 years experience
• Hands-on duct collection system design including: duct sizing, pressure drop calculations, duct layouts, duct support design, fan selection, fan power calculations.
• Hands-on dust suppression design including water sprays and agglomerate dust suppression systems.

Other Job Requirements

Preferred Qualifications

Membership in technical society

Advanced knowledge of discipline codes and standards, commercial availability and cost of materials
Effort-hour estimating and staff forecasting
Managing and leading a large project
Project set-up, developing control-level schedules, progress reporting and project close-out
Practical field experience
Intermediate computer and software skills to include the use of word processing, e-mail, spreadsheet and electronic presentation programs

Fluor Canada rewards hard work, knowledge, and commitment. Fluor offers competitive employee compensation packages, comprehensive benefit programs including Health, Dental and Vision Care, flexible spending dollars, group registered retirement program, parental top-up, education reimbursement, employee and family assistance programs, and much more. Fluor also offers several employee resource groups that aim to provide opportunities for professional and personal growth, improved wellness, and involvement in the community.

At Fluor, we believe that overall wellness encompasses the four wellness pillars of mental, physical, financial and social. Upon these pillars we are committed to fostering a healthy, inclusive and psychologically safe workplace by creating awareness through knowledge building and communication while focusing on measurable outcomes.

Compressed work schedule: The Fluor Canada offices work a compressed work schedule offering every second Friday off.

Salary is based upon experience. Salary Range: $118,000.00 - $218,000.00

The market rate for the role is typically at the mid-point of the salary range; however, variations in final salary are determined by additional factors such as the candidate’s qualifications, relevant years of experience, geographic location, internal pay equity, and prevailing market conditions for the specific role.

Fluor uses artificial intelligence (AI) in its hiring process to review applications and identify qualified candidates. More information including contact information is available in our Applicant Notice when creating a profile on our recruiting platform.

Notice to Candidates: As required by some of our clients and projects, to the extent allowed by law, offers may be conditional upon consent and clearance of a satisfactory background check which could include, but is not limited to, a criminal records check, and confirmation of education, professional registration, employment history, and references.

While only qualified candidates will be contacted for an interview, be sure to continually check our website for other related positions as they are posted. Are you ready to join us? We are looking forward to hearing from you today!

Apply About employer

More about this job

Responsibilities

The Lead Building Services Design Engineer oversees technical accuracy in project execution, including planning, scheduling, and managing engineering assignments from green-field to as-built. This role involves designing fire protection, HVAC, and dust collection systems while coordinating with clients, contractors, and other disciplines.

Requirements

Candidates must hold an accredited 4-year bachelor’s degree in Engineering Technology and possess at least 10 years of related experience. Professional registration or eligibility with Engineers and Geoscientists BC is mandatory, along with specific expertise in industrial fire protection, HVAC, and dust control systems.

Skills

Fire protection design
HVAC design
Dust collection system design
Hydraulic calculations
Project management
Engineering design
Technical specifications
Procurement
Schedule management
Cost estimation
Vendor data management
Code compliance
Industrial engineering
Team leadership
Communication skills

Benefits

Health care
Dental care
Vision care
Flexible spending dollars
Parental top-up
Education reimbursement
Employee and family assistance programs
Compressed work schedule

Visa sponsorship

Not detected in the job text

Keywords

Engineering
Procurement
Construction
Fire Protection
HVAC
Dust Collection
EPCM
NFPA
ASHRAE
Hydraulic Calculations
Project Management
Industrial Projects
Design Criteria
Technical Bid Evaluation
Engineering Technology
Professional Engineer
Sustainability
Material Procurement
Subcontract Activities
Quality Assurance
Schedule Management
Cost Estimation
Vendor Submittals
Code Compliance
Field Experience
Engineering Standards
Process Buildings
Mineral Processing
Duct Design
Fan Selection

Report this job