Jobs in Canada

Group jobs by employerEmail me new jobs Save this search

Added 16 days ago
HS
Senior Java Software Engineer
Henry Schein One Canada
Surrey, BC
- Full-time
This is a hybrid role, with one day per week in our Surrey, BC office to support collaboration, brainstorming, and team connection
Added 16 days ago
CD
Mechatronics Engineer
Convergence Design Services
Arnprior, ON
- Full-time
…speed, creativity, and real engineering depth. If you’re an engineer who loves solving hard physics problems, shipping real hardware, and seeing your work operate in the real world, you’ll…
Added 16 days ago
FL
Senior Software Engineer - .NET, C# & APIs
Flexkube Lab Inc.
Toronto, ON · Greater Toronto Area, Canada
- Contract
Strong understanding of backend architecture, API design, system integrations, and object-oriented programming principles.
Added 16 days ago
FT
Power Electronics Engineer
Foreseeson Technology
Richmond, BC
- Contract
Demonstrated experience in low-voltage and/or high-voltage electrical system design and integration.
Added 16 days ago
A
Electrical Systems Integration
Aumnitech
Montreal, QC · Greater Montreal, QC
- Full-time
System Design & Integration: Participate in technical improvements and continuous development of aircraft electrical systems, optimizing power generation and distribution architectures.
Added 16 days ago
FT
Embedded Systems Engineer
Foreseeson Technology
Richmond, BC
- Contract
The Embedded Systems Engineer will develop the firmware and embedded software that enables communication, control, monitoring, and coordination across the ESS. This role will work closely…
Added 16 days ago
CI
Principal Architect
Camis Inc
Guelph, ON
- Full-time
Define and champion enterprise-wide engineering standards covering API design, integration patterns, security, testing, and system design.
Added 16 days ago
TS
Mechanical Designer / Engineer
TalentSphere Staffing Solutions
AB · Edmonton, AB
- Full-time
…technically minded designer who enjoys developing practical building-system solutions and wants to take greater ownership of mechanical design…
Added 16 days ago
FG
Tool Design Engineer
Freudenberg Group
Tillsonburg, ON
- Full-time
Collaborates with Manufacturing and Design team(s) in evaluating and validating products after design changes are introduced
Added 16 days ago
K
Process Engineer (Mechanical)
Kawneer
Lethbridge, AB
- Full-time
Kawneer is seeking a Process Engineer (Mechanical) to support and improve fabrication manufacturing processes for architectural aluminum products, including windows, doors, curtain walls,…
Added 16 days ago
M
RQ11740 - DevOPS/Cloud Engineer - Senior
Maarut
Toronto, ON
- Contract
and operational teams, the Senior DevOps Engineer improves deployment
Added 16 days ago
H
Senior Software Engineer, Core Product (Hybrid)
Homebase
Remote, Canada
- $130,000 to $200,000 CAD / year
- Full-time
- Remote
As a Senior Software Engineer on the Core Product team, you’ll build the products small business owners rely on every single day: Scheduling, HR Management (HRM), and Payroll. This is where…
Added 16 days ago
UM
Mechanical Engineer
Ultra Maritime
Dartmouth, NS
- Full-time
The Ultra Mechanical Engineering function is responsible for the design, development, test, and documentation of mechanical assemblies for products, which includes new development, change…
Added 16 days ago
UM
Mechanical Engineer
Ultra Maritime
Dartmouth, NS
- Full-time
The Ultra Mechanical Engineering function is responsible for the design, development, test, and documentation of mechanical assemblies for products, which includes new development, change…
Added 16 days ago
IO
Mine Plant Machinery Engineer - Experienced - Kearl
Imperial Oil
Edmonton, AB
- Full-time
As a senior technical specialist, the Mine Plant Machinery Engineer will play a critical role in optimizing equipment performance, reliability, maintainability, and operational efficiency.…
Added 16 days ago
IO
Senior Geotechnical Engineer - Kearl
Imperial Oil
Edmonton, AB
- Full-time
Kearl is a fly in fly out operation with transportation hubs located in Edmonton and Calgary
Added 16 days ago
IR
Continuous Improvement Maintenance Specialist
Ice River Sustainable Solutions
Feversham, ON
- Full-time
Provide visibility to the management team regarding critical system issues and performance gaps.
Added 16 days ago
FT
Senior Electrical Engineer
Foreseeson Technology
Richmond, BC
- Contract
Foreseeson is seeking a Senior Electrical Engineer to lead electrical architecture, hardware design, system integration, and engineering validation throughout the development of this…
Added 16 days ago
GV
Lead Engineer 2 - Electronics Systems Testing
GE Vernova
Markham, ON
- Full-time
GE Vernova is seeking an experienced Lead Engineer 2 to drive high-level electronics systems testing and product development in a dynamic, cross-functional environment. Operating with…
Added 16 days ago
I
Avionics System Engineer
InfoStride
Toronto, ON
- Full-time
Key Skills: Hydraulic Systems, Fuel Systems, Hydromechanical Systems, Mechanical Design, System Integration, Testing & Validation.
Added 16 days ago
GT
Senior Front End Angular Developer
Global Technical Talent, an Inc. 5000 Company
Toronto, ON
- $80 to $90 CAD / hour
- Contract
We're modernizing the front-end architecture across our Angular application portfolio. We need a front-end engineer who can lead the effort to extract and decouple our shared layout,…
Added 16 days ago
HT
Product Development Engineer
Husky Technologies
Bolton, ON
- Full-time
System level design with limited guidance, frequently in the absence of specific design standards.
Added 16 days ago
VP
Applications Engineer - Project Management
Vishay Precision Group, Inc. (VPG)
Toronto, ON
- Full-time
We are seeking an Application Engineer with strong project management capability to support our Optical Products Group.
Added 16 days ago
YE
Senior Mechanical Engineer
YJE Engineering
Calgary, AB · Greater Calgary Metropolitan Area
- Full-time
…architects, developers, contractors, and facility owners to design high-performing mechanical systems that support the long-term success of every project. We are seeking an experienced…
Added 16 days ago
CC
Specialist, Provisioning
Cogeco Connexion
Burlington, ON
- Full-time
The Provisioning engineer is responsible for the management, maintenance and daily monitoring of the regions HSD provision system, including related systems that provide HSD, PON and…

Foreseeson Technology

Embedded Systems Engineer

Richmond, BC, Canada

Expected Salary: CA$87,360 per year. · Contract

Apply on LinkedIn About employer

Applications open in a new tab.

Job details

Pay: Expected Salary: CA$87,360 per year.
Job type: Contract
Apply by: Apr 24, 2027
Posting language: English
Posted: Oct 26, 2026

Original job description

About the Employer

Foreseeson Technology Inc. is a multifaceted, award-winning technology innovator providing electronic manufacturing, IT security distribution, electric vehicle charging equipment, and Intelligent software platforms for EV Charger and Energy Management System. Foreseeson has experienced over 25 years of continuous growth through innovation and we are also known for pioneering green technology to lower our carbon footprint through electric vehicle charging partnerships with municipalities and corporations.

About the Project

Foreseeson Technology Inc. is developing a modular Energy Storage System (ESS) using high-voltage battery packs. The system combines battery management, power conversion, embedded control, charging and discharging coordination, and local and cloud-connected monitoring.

The Embedded Systems Engineer will develop the firmware and embedded software that enables communication, control, monitoring, and coordination across the ESS. This role will work closely with electrical and power electronics engineers to integrate all system components.

Core accountabilities and Responsibilities

Embedded Firmware Development

Design, develop, test, and maintain embedded firmware using C and C++ for microcontroller-based ESS controllers and supporting hardware.
Implement reliable control and monitoring functions for battery packs, DC-DC converters, charging equipment, inverter interfaces, and system-level control devices.
Develop firmware for battery status acquisition, charge and discharge sequencing, contactor and pre-charge control interfaces, fault detection, and system-state management, subject to hardware and safety requirements.
Implement watchdogs, timeouts, fault-state handling, diagnostic reporting, and controlled recovery strategies.
Develop modular, maintainable firmware with appropriate code documentation, configuration management, and testing practices.

Device Communications

Implement and troubleshoot communication interfaces, including CAN/CAN FD where applicable, RS-485, UART, I²C, and SPI.
Integrate communication with existing battery controllers using verified protocol documentation and bench testing.
Develop and maintain communication drivers, message parsers, device status interfaces, and diagnostic functions.
Implement data acquisition for battery voltage, current, temperature, SOC, SOH, alarms, and fault codes where these parameters are available through supported interfaces.
Diagnose communication failures, timing issues, bus errors, signal-interface problems, and interoperability challenges across multiple battery packs and power electronics devices.

System Controller Integration

Support the implementation of protection interlocks, fault escalation, controlled shutdown, and emergency-stop interfaces in accordance with the system safety architecture.
Integrate system-level commands and status feedback for DC-DC converters, charging and power distribution modules, and inverter interfaces.
Support the implementation of control logic for battery utilization, energy-flow coordination, and operating modes.

System Monitoring and Connectivity

Develop embedded data interfaces for local monitoring, remote diagnostics, and the ESS dashboard and cloud platform.
Integrate embedded controllers and single-board computers such as Raspberry Pi, BeagleBone, or equivalent platforms where appropriate.
Support communication between embedded devices, the system controller, and supervisory monitoring software using suitable protocols or other defined interfaces.
Implement reliable telemetry, event logging, timestamping, device-health monitoring, and diagnostic data collection.
Support secure device communication, authentication mechanisms, access control interfaces, and firmware update procedures as required by the system architecture.

Firmware Testing and Validation

Develop unit tests, integration tests, hardware-in-the-loop tests, and test utilities as appropriate for the target platform.
Use hardware debuggers, oscilloscopes, logic analyzers, CAN analyzers, and other diagnostic equipment to identify and resolve firmware and interface issues.
Validate firmware behaviour under normal operation, communication loss, sensor faults, abnormal operating conditions, and system shutdown scenarios.
Work with the electrical and power electronics teams to troubleshoot hardware–firmware integration problems.
Maintain source control using Git or equivalent tools, and document firmware versions, changes, test results, and known limitations.
Participate in technical reviews, requirements definition, system integration, prototype testing, and preparation of engineering documentation.

Requirements and Qualifications

Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a closely related discipline.
At least three years of professional experience in embedded firmware development.
Strong proficiency in embedded C/C++, and/or python programming.
Hands-on experience with microcontroller platforms such as STM32, Texas Instruments, NXP, or equivalent.
Experience using firmware debugging tools, hardware debuggers, and embedded development environments.
Practical experience with CAN, RS-485, UART, I²C, and SPI communication protocols.
Experience programming or integrating single-board computers, such as Raspberry Pi, BeagleBone, or equivalent platforms.
Working knowledge of Linux-based systems and real-time operating systems (RTOS).
Ability to read electrical schematics and work closely with hardware and power electronics engineers.
Strong debugging, analytical, and problem-solving skills.
Ability to write clear technical documentation and work effectively in a multidisciplinary R&D team.

Preferred Qualifications

Experience developing firmware for battery management systems, energy storage, battery charging, power electronics, or industrial control systems.
Experience developing and testing software for safety-relevant or safety-critical applications.
Familiarity with functional safety principles, fault handling, watchdogs, and safe-state design in embedded systems.
Experience with bootloaders, firmware updates, over-the-air (OTA) update mechanisms, and firmware version management.
Familiarity with Git, automated testing, continuous integration, and software build systems such as Make or CMake.
Experience with Yocto or other embedded Linux build and deployment environments.
Experience with MQTT, cloud-connected IoT devices, telemetry, or remote diagnostic systems.
Familiarity with battery SOC/SOH monitoring data, battery communication, and multi-device control.

Equal Employment Opportunity

We are an equal opportunity employer committed to fostering an inclusive, diverse, and respectful workplace, and we welcome applications from all qualified individuals.

We are committed to providing reasonable accommodations throughout the recruitment, selection, and employment process. If you require accommodation at any stage of the hiring process, please contact hr@foreseeson.com so that we can work with you to meet your needs.

Work Arrangement: In-person, Richmond, BC

Employment Type: 1-year contract, with the potential for extension or conversion to a permanent, full-time position.

Expected Salary: CA$87,360 per year. The final salary will be determined based on the successful candidate’s qualifications, relevant experience, and overall fit for the role.

*We would like to thank all applicants in advance for your interest in this position. Only candidates selected for an interview will be contacted.

Apply on LinkedIn About employer

More about this job

Responsibilities

Develop, test, and maintain embedded firmware for the energy storage system, including battery monitoring, control, device communications, fault handling, and coordination with power electronics. Integrate monitoring and connectivity features, validate firmware through testing and hardware debugging, and collaborate with multidisciplinary engineering teams on system integration and documentation.

Requirements

Requires a bachelor's degree in a relevant engineering or computer science discipline and at least three years of professional embedded firmware development experience. Candidates should have strong embedded C/C++ skills, experience with microcontrollers and communication protocols, familiarity with Linux and RTOS, and the ability to debug hardware–firmware integration issues.

Skills

Embedded C/C++
Python
Microcontroller Firmware
STM32
CAN/CAN FD
RS-485
UART
I²C
SPI
Linux
Real-Time Operating Systems
Battery Management Systems
Firmware Debugging
Hardware Integration
Git
Technical Documentation

Visa sponsorship

Not detected in the job text

Keywords

Embedded Systems
Energy Storage System
Embedded Firmware
C
C++
Python
Microcontrollers
STM32
Texas Instruments
NXP
CAN
CAN FD
RS-485
UART
I²C
SPI
Linux
RTOS
Raspberry Pi
BeagleBone
Battery Management Systems
Battery SOC/SOH
Power Electronics
Hardware-in-the-Loop Testing
Git
Make
CMake
Yocto
MQTT
Firmware Updates

Report this job

Work requirements

Jobs in Canada