Find work in Canada.

493,559 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 12 mins ago
G
Surveillance Security Guard Part-Time - Commercial Site
GardaWorld
Toronto, ON
- Part-time
Document observed events and incidents, writing detailed reports
Added 12 mins ago
Junior Full stack Developer (Front End Focus)
Scotiabank
Toronto, ON
Participates in merging, integrating, versioning, and promoting code through environments and version control
Added 27 mins ago
GC
HIL Validation Engineer
Global Connect Technologies
Windsor, ON
- Full-time
Set up and maintain HIL test environments for automotive control systems.
Added 27 mins ago
CE
Application Engineer
Canadian Executive Search Group (USA) Inc / Division of Arrow Group of Companies
Cambridge, ON · Greater Kitchener-Cambridge-Waterloo Metropolitan Area
- $60,000 to $85,000 CAD / year
- Full-time
Experience with HVAC, fluid systems, odour control, air emissions control, dry scrubbers, activated carbon systems, municipal tenders, or OEM equipment projects would be an asset.
Added 27 mins ago
B&
Security Manager (Healthcare)
Black & McDonald Limited
Toronto, ON
- Full-time
Monitor and manage all security operations, including access control, surveillance systems, and emergency response procedures.
Added 27 mins ago
E
Project Manager, Transmission Projects
EPCOR
AB · Edmonton, Alberta
- Full-time
Maintain open communication with crews, inspectors and contractors, and conduct site visits to document progress, proactively identify risks and issues, and ensure compliance with the…
Added 27 mins ago
M
RQ11574 - Information Management Specialist - Senior
Maarut
Toronto, ON
- Contract
developing document management protocols, guidelines and
Added 27 mins ago
CF
Senior Security Specialist
CI Financial
Toronto, ON
- Full-time
Monitor security platforms for appropriate operation, data quality, coverage, performance and control effectiveness.
Added 27 mins ago
SA
Manufacturing and Production Engineer
Skymark Aerospace
Mississauga, ON
- Full-time
…help balance quality, cost, and build time while maintaining control of parts, configurations, and engineering…
Added 27 mins ago
ME
Buyer, Investments
Media Experts
Toronto, ON
- Full-time
The role of a Buyer, Investment is to prepare, negotiate and document the execution of client’s Traditional and Connected TV media buys within their buying group, as well as prepare or…
Added 42 mins ago
Manager, Accounts Payable
University of Toronto
Toronto, ON
Experience with document control and process implementation.
Added 57 mins ago
CO
Application & Integration Technical Analyst
City of Saint John
Saint John, NB
- Full-time
Ability to map business processes and document solutions (process mapping and architecture drawing tools such as Visio or ArchiMate)
Added 57 mins ago
D
Supervisor, Environmental, H&S and Quality
DCM
Calgary, AB
- Full-time
Experience supporting audits, document control and certification programs such as FSC
Added 57 mins ago
UO
Manager, Accounts Payable
University of Toronto
Toronto, ON
- Full-time
Experience with document control and process implementation.
Added 57 mins ago
FT
Power Electronics Engineer
Foreseeson Technology
Richmond, BC
- Contract
…system combines battery management, power conversion, embedded control, charging and discharging coordination, and local and cloud-connected…
Added 57 mins ago
FT
Embedded Systems Engineer
Foreseeson Technology
Richmond, BC
- Contract
Maintain source control using Git or equivalent tools, and document firmware versions, changes, test results, and known limitations.
Added 57 mins ago
Aircraft Maintenance Engineer - YVR
WestJet Group
Vancouver, BC
Proven technical aptitude with strong airframe, powerplant, and flight control experience required
Added 57 mins ago
C
Associate Controls Designer
Carrier
Coquitlam, BC
- $71,500 to $121,500 CAD / year
- Full-time
If you are a driven technical professional who loves translating complex systems into clean control algorithms, intuitive user interfaces, and seamless field solutions, this is your…
Added 57 mins ago
NA
Security & Technology Services Manager
New Age Group
Concord, ON
- Full-time
…and multi-residential clients. Our expertise includes access control, video surveillance, intrusion alarms, ULC inspections, structured cabling, fiber optics, intercom systems, networking,…
Added 1 hour ago
MV
Sales Lead - Holt Renfrew
Monica Vinader
Calgary, AB
- Full-time
Added 1 hour ago
B
Sampler Stock Control (Afternoon Shift)
Bimeda
Cambridge, ON
- Full-time
The Sampler, Stock Control is responsible for supporting warehouse inventory control and material sampling activities within a regulated pharmaceutical manufacturing environment. This role…
Added 1 hour ago
TR
Manager, Global Business Systems (Service Delivery)
The Redpath Group
Vaughan, ON
- Full-time
…in the definition of project objectives and oversee quality control throughout its life cycle. The Manager, Global Business Systems establishes, maintains, and improves Redpath’s ITPMO…
Added 1 hour ago
KG
Manager, TMF and Earthworks Area
Kinross Gold Corporation
Red Lake, ON
- Full-time
…requirements; proficiency with relevant planning, reporting, and document-control…
Added 1 hour ago
SM
Unit Assistant, Emergency
Stevenson Memorial Hospital
Alliston, ON
- Internship
Accurately document physician orders in patient care plan.
Added 1 hour ago
G
Quality Manager
Ganotec
Clarington, ON
- Full-time
Align quality control objectives with construction procedures to achieve product reliability and minimize cost

Foreseeson Technology

Embedded Systems Engineer

Richmond, BC, Canada

Expected Salary: CA$87,360 per year. · Contract

Apply About employer

Applications open in a new tab.

Job details

Pay: Expected Salary: CA$87,360 per year.
Job type: Contract
Apply by: Apr 24, 2027
Posting language: English
Posted: Oct 26, 2026

Original job description

About the Employer

Foreseeson Technology Inc. is a multifaceted, award-winning technology innovator providing electronic manufacturing, IT security distribution, electric vehicle charging equipment, and Intelligent software platforms for EV Charger and Energy Management System. Foreseeson has experienced over 25 years of continuous growth through innovation and we are also known for pioneering green technology to lower our carbon footprint through electric vehicle charging partnerships with municipalities and corporations.

About the Project

Foreseeson Technology Inc. is developing a modular Energy Storage System (ESS) using high-voltage battery packs. The system combines battery management, power conversion, embedded control, charging and discharging coordination, and local and cloud-connected monitoring.

The Embedded Systems Engineer will develop the firmware and embedded software that enables communication, control, monitoring, and coordination across the ESS. This role will work closely with electrical and power electronics engineers to integrate all system components.

Core accountabilities and Responsibilities

Embedded Firmware Development

Design, develop, test, and maintain embedded firmware using C and C++ for microcontroller-based ESS controllers and supporting hardware.
Implement reliable control and monitoring functions for battery packs, DC-DC converters, charging equipment, inverter interfaces, and system-level control devices.
Develop firmware for battery status acquisition, charge and discharge sequencing, contactor and pre-charge control interfaces, fault detection, and system-state management, subject to hardware and safety requirements.
Implement watchdogs, timeouts, fault-state handling, diagnostic reporting, and controlled recovery strategies.
Develop modular, maintainable firmware with appropriate code documentation, configuration management, and testing practices.

Device Communications

Implement and troubleshoot communication interfaces, including CAN/CAN FD where applicable, RS-485, UART, I²C, and SPI.
Integrate communication with existing battery controllers using verified protocol documentation and bench testing.
Develop and maintain communication drivers, message parsers, device status interfaces, and diagnostic functions.
Implement data acquisition for battery voltage, current, temperature, SOC, SOH, alarms, and fault codes where these parameters are available through supported interfaces.
Diagnose communication failures, timing issues, bus errors, signal-interface problems, and interoperability challenges across multiple battery packs and power electronics devices.

System Controller Integration

Support the implementation of protection interlocks, fault escalation, controlled shutdown, and emergency-stop interfaces in accordance with the system safety architecture.
Integrate system-level commands and status feedback for DC-DC converters, charging and power distribution modules, and inverter interfaces.
Support the implementation of control logic for battery utilization, energy-flow coordination, and operating modes.

System Monitoring and Connectivity

Develop embedded data interfaces for local monitoring, remote diagnostics, and the ESS dashboard and cloud platform.
Integrate embedded controllers and single-board computers such as Raspberry Pi, BeagleBone, or equivalent platforms where appropriate.
Support communication between embedded devices, the system controller, and supervisory monitoring software using suitable protocols or other defined interfaces.
Implement reliable telemetry, event logging, timestamping, device-health monitoring, and diagnostic data collection.
Support secure device communication, authentication mechanisms, access control interfaces, and firmware update procedures as required by the system architecture.

Firmware Testing and Validation

Develop unit tests, integration tests, hardware-in-the-loop tests, and test utilities as appropriate for the target platform.
Use hardware debuggers, oscilloscopes, logic analyzers, CAN analyzers, and other diagnostic equipment to identify and resolve firmware and interface issues.
Validate firmware behaviour under normal operation, communication loss, sensor faults, abnormal operating conditions, and system shutdown scenarios.
Work with the electrical and power electronics teams to troubleshoot hardware–firmware integration problems.
Maintain source control using Git or equivalent tools, and document firmware versions, changes, test results, and known limitations.
Participate in technical reviews, requirements definition, system integration, prototype testing, and preparation of engineering documentation.

Requirements and Qualifications

Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a closely related discipline.
At least three years of professional experience in embedded firmware development.
Strong proficiency in embedded C/C++, and/or python programming.
Hands-on experience with microcontroller platforms such as STM32, Texas Instruments, NXP, or equivalent.
Experience using firmware debugging tools, hardware debuggers, and embedded development environments.
Practical experience with CAN, RS-485, UART, I²C, and SPI communication protocols.
Experience programming or integrating single-board computers, such as Raspberry Pi, BeagleBone, or equivalent platforms.
Working knowledge of Linux-based systems and real-time operating systems (RTOS).
Ability to read electrical schematics and work closely with hardware and power electronics engineers.
Strong debugging, analytical, and problem-solving skills.
Ability to write clear technical documentation and work effectively in a multidisciplinary R&D team.

Preferred Qualifications

Experience developing firmware for battery management systems, energy storage, battery charging, power electronics, or industrial control systems.
Experience developing and testing software for safety-relevant or safety-critical applications.
Familiarity with functional safety principles, fault handling, watchdogs, and safe-state design in embedded systems.
Experience with bootloaders, firmware updates, over-the-air (OTA) update mechanisms, and firmware version management.
Familiarity with Git, automated testing, continuous integration, and software build systems such as Make or CMake.
Experience with Yocto or other embedded Linux build and deployment environments.
Experience with MQTT, cloud-connected IoT devices, telemetry, or remote diagnostic systems.
Familiarity with battery SOC/SOH monitoring data, battery communication, and multi-device control.

Equal Employment Opportunity

We are an equal opportunity employer committed to fostering an inclusive, diverse, and respectful workplace, and we welcome applications from all qualified individuals.

We are committed to providing reasonable accommodations throughout the recruitment, selection, and employment process. If you require accommodation at any stage of the hiring process, please contact hr@foreseeson.com so that we can work with you to meet your needs.

Work Arrangement: In-person, Richmond, BC

Employment Type: 1-year contract, with the potential for extension or conversion to a permanent, full-time position.

Expected Salary: CA$87,360 per year. The final salary will be determined based on the successful candidate’s qualifications, relevant experience, and overall fit for the role.

*We would like to thank all applicants in advance for your interest in this position. Only candidates selected for an interview will be contacted.

Apply About employer

More about this job

Responsibilities

Develop, test, and maintain embedded firmware for the energy storage system, including battery monitoring, control, device communications, fault handling, and coordination with power electronics. Integrate monitoring and connectivity features, validate firmware through testing and hardware debugging, and collaborate with multidisciplinary engineering teams on system integration and documentation.

Requirements

Requires a bachelor's degree in a relevant engineering or computer science discipline and at least three years of professional embedded firmware development experience. Candidates should have strong embedded C/C++ skills, experience with microcontrollers and communication protocols, familiarity with Linux and RTOS, and the ability to debug hardware–firmware integration issues.

Skills

Embedded C/C++
Python
Microcontroller Firmware
STM32
CAN/CAN FD
RS-485
UART
I²C
SPI
Linux
Real-Time Operating Systems
Battery Management Systems
Firmware Debugging
Hardware Integration
Git
Technical Documentation

Visa sponsorship

Not detected in the job text

Keywords

Embedded Systems
Energy Storage System
Embedded Firmware
C
C++
Python
Microcontrollers
STM32
Texas Instruments
NXP
CAN
CAN FD
RS-485
UART
I²C
SPI
Linux
RTOS
Raspberry Pi
BeagleBone
Battery Management Systems
Battery SOC/SOH
Power Electronics
Hardware-in-the-Loop Testing
Git
Make
CMake
Yocto
MQTT
Firmware Updates

Report this job