Find work in Canada.

493,559 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 12 mins ago
M
Staff Software Engineer, AI
Maple
Toronto, ON
- Full-time
We’re looking for a Staff Software Engineer, AI to own and ship the next generation of AI-powered healthcare experiences at Maple.
Added 27 mins ago
GC
HIL Validation Engineer
Global Connect Technologies
Windsor, ON
- Full-time
Set up and maintain HIL test environments for automotive control systems.
Added 27 mins ago
Manager, Engineering and Projects
Orano
Saskatoon, SK
Registered as a professional engineer in the province of Saskatchewan
Added 27 mins ago
SA
Manufacturing and Production Engineer
Skymark Aerospace
Mississauga, ON
- Full-time
We are seeking a Manufacturing and Production Engineer to develop the processes, tooling, and documentation needed to build UAV hardware consistently. You will work with design engineers,…
Added 42 mins ago
H
Senior Prototype Engineer
Humanoid
Burnaby, BC
- Full-time
We are looking for a Senior Prototype Engineer to drive the development, assembly, integration, and validation of advanced humanoid robotic systems, with a particular focus on robotic…
Added 57 mins ago
HS
Senior Java Software Engineer
Henry Schein One Canada
Surrey, BC
- Full-time
We are looking for a Senior Software Engineer to join our True North team and help build and evolve Dentrix Ascend for the US market.
Added 57 mins ago
FT
Power Electronics Engineer
Foreseeson Technology
Richmond, BC
- Contract
Foreseeson is seeking a Power Electronics Engineer to develop, evaluate, integrate, and validate the power conversion architecture required for the ESS prototype and its future commercial…
Added 57 mins ago
A
Electrical Systems Integration
Aumnitech
Montreal, QC · Greater Montreal, QC
- Full-time
We are seeking an experienced Professional Engineer – Electrical Systems Integration to support prime aerospace platform development in the Greater Montreal area. In this role, you will be…
Added 57 mins ago
FT
Embedded Systems Engineer
Foreseeson Technology
Richmond, BC
- Contract
The Embedded Systems Engineer will develop the firmware and embedded software that enables communication, control, monitoring, and coordination across the ESS. This role will work closely…
Added 57 mins ago
Aircraft Maintenance Engineer - YVR
WestJet Group
Vancouver, BC
Looking for the ideal aviation career? Join our highly skilled team as an Aircraft Maintenance Engineer and contribute to the safe and efficient daily maintenance on our fleet of aircraft-…
Added 57 mins ago
C
Sr. Database Automation Engineer
CIBC
Toronto, ON
- Full-time
Added 1 hour ago
AI
Performance Test Engineer
Apptoza Inc.
Toronto, ON
- Contract
Added 1 hour ago
AD
Cybersecurity Detection Engineer / Purple Team
act digital
Montreal, QC · Greater Montreal Metropolitan Area
- Full-time
We are currently looking for a Detection Engineer to join a major financial-sector environment in Montreal.
Added 1 hour ago
CI
Principal Architect
Camis Inc
Guelph, ON
- Full-time
We are committed to building software that stands the test of time, and we're looking for a Principal Architect to define the technical direction of our Parks & Recreation platform.
Added 1 hour ago
G
Senior Quality Assurance Automation Engineer
GryphTech
Mississauga, ON
- Full-time
Web Applications & AI-Assisted Test Automation
Added 1 hour ago
M
RQ11740 - DevOPS/Cloud Engineer - Senior
Maarut
Toronto, ON
- Contract
and operational teams, the Senior DevOps Engineer improves deployment
Added 1 hour ago
UM
Mechanical Engineer
Ultra Maritime
Dartmouth, NS
- Full-time
The Ultra Mechanical Engineering function is responsible for the design, development, test, and documentation of mechanical assemblies for products, which includes new development, change…
Added 1 hour ago
UM
Mechanical Engineer
Ultra Maritime
Dartmouth, NS
- Full-time
The Ultra Mechanical Engineering function is responsible for the design, development, test, and documentation of mechanical assemblies for products, which includes new development, change…
Added 1 hour ago
Q
Senior Test Automation Engineer (French)
Quantiphi
Canada
- Full-time
We are looking for a Test Automation/QA Engineer to support a Contact Center as a Service (CCaaS) deployment, validating that DTMF IVR menus, call routing, and queue/skillset configurations…
Added 1 hour ago
FT
Senior Electrical Engineer
Foreseeson Technology
Richmond, BC
- Contract
Foreseeson is seeking a Senior Electrical Engineer to lead electrical architecture, hardware design, system integration, and engineering validation throughout the development of this…
Added 1 hour ago
GV
Lead Engineer 2 - Electronics Systems Testing
GE Vernova
Markham, ON
- Full-time
GE Vernova is seeking an experienced Lead Engineer 2 to drive high-level electronics systems testing and product development in a dynamic, cross-functional environment. Operating with…
Added 2 hours ago
CC
Aviation Technologist
Confederation College
Thunder Bay, ON
- Full-time
Demonstrated technical expertise in aviation systems (e.g., airframes, powerplants, avionics) and the use of tools, test equipment, and simulators in an educational or industry setting.
Added 2 hours ago
HT
PD Software for Service
Husky Technologies
Bolton, ON
- Full-time
The Service team is currently seeking a Software engineer/designer to specialize in resolving service issues with a focus on Injection Molding Machine controls, including servo drive and…
Added 2 hours ago
N|
RAN Data Collection Engineer/Drive Tester
NextGen | GTA: A Kelly Telecom Company
Montreal, QC
- Contract
RAN Data Collection Engineer / Drive Test Engineer
Added 2 hours ago
HT
Manufacturing Engineer (Contract)
Husky Technologies
Bolton, ON
- Full-time
We have an opening for a Mechanical / Manufacturing Engineer working with our Manufacturing Engineering Team as outlined below:

Foreseeson Technology

Embedded Systems Engineer

Richmond, BC, Canada

Expected Salary: CA$87,360 per year. · Contract

Apply About employer

Applications open in a new tab.

Job details

Pay: Expected Salary: CA$87,360 per year.
Job type: Contract
Apply by: Apr 24, 2027
Posting language: English
Posted: Oct 26, 2026

Original job description

About the Employer

Foreseeson Technology Inc. is a multifaceted, award-winning technology innovator providing electronic manufacturing, IT security distribution, electric vehicle charging equipment, and Intelligent software platforms for EV Charger and Energy Management System. Foreseeson has experienced over 25 years of continuous growth through innovation and we are also known for pioneering green technology to lower our carbon footprint through electric vehicle charging partnerships with municipalities and corporations.

About the Project

Foreseeson Technology Inc. is developing a modular Energy Storage System (ESS) using high-voltage battery packs. The system combines battery management, power conversion, embedded control, charging and discharging coordination, and local and cloud-connected monitoring.

The Embedded Systems Engineer will develop the firmware and embedded software that enables communication, control, monitoring, and coordination across the ESS. This role will work closely with electrical and power electronics engineers to integrate all system components.

Core accountabilities and Responsibilities

Embedded Firmware Development

Design, develop, test, and maintain embedded firmware using C and C++ for microcontroller-based ESS controllers and supporting hardware.
Implement reliable control and monitoring functions for battery packs, DC-DC converters, charging equipment, inverter interfaces, and system-level control devices.
Develop firmware for battery status acquisition, charge and discharge sequencing, contactor and pre-charge control interfaces, fault detection, and system-state management, subject to hardware and safety requirements.
Implement watchdogs, timeouts, fault-state handling, diagnostic reporting, and controlled recovery strategies.
Develop modular, maintainable firmware with appropriate code documentation, configuration management, and testing practices.

Device Communications

Implement and troubleshoot communication interfaces, including CAN/CAN FD where applicable, RS-485, UART, I²C, and SPI.
Integrate communication with existing battery controllers using verified protocol documentation and bench testing.
Develop and maintain communication drivers, message parsers, device status interfaces, and diagnostic functions.
Implement data acquisition for battery voltage, current, temperature, SOC, SOH, alarms, and fault codes where these parameters are available through supported interfaces.
Diagnose communication failures, timing issues, bus errors, signal-interface problems, and interoperability challenges across multiple battery packs and power electronics devices.

System Controller Integration

Support the implementation of protection interlocks, fault escalation, controlled shutdown, and emergency-stop interfaces in accordance with the system safety architecture.
Integrate system-level commands and status feedback for DC-DC converters, charging and power distribution modules, and inverter interfaces.
Support the implementation of control logic for battery utilization, energy-flow coordination, and operating modes.

System Monitoring and Connectivity

Develop embedded data interfaces for local monitoring, remote diagnostics, and the ESS dashboard and cloud platform.
Integrate embedded controllers and single-board computers such as Raspberry Pi, BeagleBone, or equivalent platforms where appropriate.
Support communication between embedded devices, the system controller, and supervisory monitoring software using suitable protocols or other defined interfaces.
Implement reliable telemetry, event logging, timestamping, device-health monitoring, and diagnostic data collection.
Support secure device communication, authentication mechanisms, access control interfaces, and firmware update procedures as required by the system architecture.

Firmware Testing and Validation

Develop unit tests, integration tests, hardware-in-the-loop tests, and test utilities as appropriate for the target platform.
Use hardware debuggers, oscilloscopes, logic analyzers, CAN analyzers, and other diagnostic equipment to identify and resolve firmware and interface issues.
Validate firmware behaviour under normal operation, communication loss, sensor faults, abnormal operating conditions, and system shutdown scenarios.
Work with the electrical and power electronics teams to troubleshoot hardware–firmware integration problems.
Maintain source control using Git or equivalent tools, and document firmware versions, changes, test results, and known limitations.
Participate in technical reviews, requirements definition, system integration, prototype testing, and preparation of engineering documentation.

Requirements and Qualifications

Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a closely related discipline.
At least three years of professional experience in embedded firmware development.
Strong proficiency in embedded C/C++, and/or python programming.
Hands-on experience with microcontroller platforms such as STM32, Texas Instruments, NXP, or equivalent.
Experience using firmware debugging tools, hardware debuggers, and embedded development environments.
Practical experience with CAN, RS-485, UART, I²C, and SPI communication protocols.
Experience programming or integrating single-board computers, such as Raspberry Pi, BeagleBone, or equivalent platforms.
Working knowledge of Linux-based systems and real-time operating systems (RTOS).
Ability to read electrical schematics and work closely with hardware and power electronics engineers.
Strong debugging, analytical, and problem-solving skills.
Ability to write clear technical documentation and work effectively in a multidisciplinary R&D team.

Preferred Qualifications

Experience developing firmware for battery management systems, energy storage, battery charging, power electronics, or industrial control systems.
Experience developing and testing software for safety-relevant or safety-critical applications.
Familiarity with functional safety principles, fault handling, watchdogs, and safe-state design in embedded systems.
Experience with bootloaders, firmware updates, over-the-air (OTA) update mechanisms, and firmware version management.
Familiarity with Git, automated testing, continuous integration, and software build systems such as Make or CMake.
Experience with Yocto or other embedded Linux build and deployment environments.
Experience with MQTT, cloud-connected IoT devices, telemetry, or remote diagnostic systems.
Familiarity with battery SOC/SOH monitoring data, battery communication, and multi-device control.

Equal Employment Opportunity

We are an equal opportunity employer committed to fostering an inclusive, diverse, and respectful workplace, and we welcome applications from all qualified individuals.

We are committed to providing reasonable accommodations throughout the recruitment, selection, and employment process. If you require accommodation at any stage of the hiring process, please contact hr@foreseeson.com so that we can work with you to meet your needs.

Work Arrangement: In-person, Richmond, BC

Employment Type: 1-year contract, with the potential for extension or conversion to a permanent, full-time position.

Expected Salary: CA$87,360 per year. The final salary will be determined based on the successful candidate’s qualifications, relevant experience, and overall fit for the role.

*We would like to thank all applicants in advance for your interest in this position. Only candidates selected for an interview will be contacted.

Apply About employer

More about this job

Responsibilities

Develop, test, and maintain embedded firmware for the energy storage system, including battery monitoring, control, device communications, fault handling, and coordination with power electronics. Integrate monitoring and connectivity features, validate firmware through testing and hardware debugging, and collaborate with multidisciplinary engineering teams on system integration and documentation.

Requirements

Requires a bachelor's degree in a relevant engineering or computer science discipline and at least three years of professional embedded firmware development experience. Candidates should have strong embedded C/C++ skills, experience with microcontrollers and communication protocols, familiarity with Linux and RTOS, and the ability to debug hardware–firmware integration issues.

Skills

Embedded C/C++
Python
Microcontroller Firmware
STM32
CAN/CAN FD
RS-485
UART
I²C
SPI
Linux
Real-Time Operating Systems
Battery Management Systems
Firmware Debugging
Hardware Integration
Git
Technical Documentation

Visa sponsorship

Not detected in the job text

Keywords

Embedded Systems
Energy Storage System
Embedded Firmware
C
C++
Python
Microcontrollers
STM32
Texas Instruments
NXP
CAN
CAN FD
RS-485
UART
I²C
SPI
Linux
RTOS
Raspberry Pi
BeagleBone
Battery Management Systems
Battery SOC/SOH
Power Electronics
Hardware-in-the-Loop Testing
Git
Make
CMake
Yocto
MQTT
Firmware Updates

Report this job