Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 1 hour ago
V
Service Technician – Offset /Flexo
VINSAK
Toronto, ON · Greater Toronto Area, Canada
- Full-time
Headquartered in Gurgaon, India, VINSAK Group has manufacturing facilities in Mumbai-India and Barcelona-Spain with employees across 6 countries and 13 cities. Our group companies operate…
Added 2 hours ago
OA
General Technician
O'Regan's Automotive Group
Dartmouth, NS
- Full-time
…clients and community. Not to mention our spacious and immaculate facilities and excellent…
Added 3 hours ago
HT
Assembly Technician (Contract)
Husky Technologies
Bolton, ON
- Full-time
Clean, state-of-the-art manufacturing facilities with air quality, climate control and outstanding safety records
Added 3 hours ago
HT
Maintenance Technician
Husky Technologies
Bolton, ON
- Full-time
Clean, state-of-the-art manufacturing facilities with air quality, climate control and outstanding safety records
Added 3 hours ago
HT
Manuf. Support Technician
Husky Technologies
Bolton, ON
- Full-time
Clean, state-of-the-art manufacturing facilities with air quality, climate control and outstanding safety records
Added 5 hours ago
FA
Heat Treatment Technician (Surface Treatment Technician)
FTAI Aviation
Montreal, QC
- Full-time
As a Heat Treatment Technician at FTAI Aviation, you will:
Added 6 hours ago
C
Junior BAS Technician - FIFO 14/14
Convergint
Fort McMurray, AB · CA AB Fort McMurray
- Full-time
Job Description: We are currently recruiting for an experienced Building Automation Technician to join our team in Fort McMurray. The Building Automation Technician will be responsible for…
Added 6 hours ago
C
BAS Technician - 14/14
Convergint
Fort McMurray, AB · CA AB Fort McMurray
- Full-time
Ensure regular open communication with the client’s facilities personnel, highlighting any problems or issues.
Added 6 hours ago
CF
Sports Stores Technician
Canadian Forces Morale and Welfare Services (CFMWS)
Borden, ON
- Full-time
As a Sports Store Technician you will assist in the smooth operation of the Sports Store, and will prepare reports, maintain distribution account records, obtains quotes for purchasing…
Added 7 hours ago
CE
Heavy Equipment Field Service Technician (421A / 310T)
Cropac Equipment Inc
Oakville, ON
- Full-time
Cropac Equipment Inc. is looking for a highly experienced, licensed Field Service Technician to join our Service team.
Added 8 hours ago
G-
Labourer, Processing Facilities
GFL - Sewer Technologies Division
AB · Edmonton, AB
- Full-time
The Labourer, Processing Facilities, is responsible for the handling, consolidating and processing of hazardous and non-hazardous waste materials received by the processing facilities in an…
Added 8 hours ago
GF
Electrical Engineer (Controls and Infrastructure)
General Fusion Inc.
Richmond, BC
- Full-time
This is a hybrid role, but predominantly on site at General Fusion's facilities in Richmond, BC: panel building, testing, and commissioning happen in our lab and on the experiment floor.…
Added 8 hours ago
B
Building Maintenance Technician II
BGIS
Toronto, ON
- Full-time
The General Repair Technician II – Static is a mid-entry level position, responsible for assisting other technicians, performing maintenance and repair, routine services on non-technical…
Added 9 hours ago
HT
Assembly Technician (Contract)
Husky Technologies
Bolton, ON
- Full-time
Clean, state-of-the-art manufacturing facilities with air quality, climate control and outstanding safety records
Added 9 hours ago
HT
Manuf. Support Technician
Husky Technologies
Bolton, ON
- Full-time
Clean, state-of-the-art manufacturing facilities with air quality, climate control and outstanding safety records
Added 9 hours ago
HT
Maintenance Technician
Husky Technologies
Bolton, ON
- Full-time
Clean, state-of-the-art manufacturing facilities with air quality, climate control and outstanding safety records
Added 9 hours ago
SH
Pharmacy Technician - (Calgary, AB) - Onsite
Sentrex Health Solutions
Calgary, AB
- Full-time
State-of-the-art facilities to provide high-quality products and services
Added 13 hours ago
B
Building Maintenance Technician II
BGIS
Toronto, ON
- Full-time
The General Repair Technician II – Static is a mid-entry level position, responsible for assisting other technicians, performing maintenance and repair, routine services on non-technical…
Added 15 hours ago
HT
Assembly Technician (Contract)
Husky Technologies
Bolton, ON
- Full-time
Clean, state-of-the-art manufacturing facilities with air quality, climate control and outstanding safety records
Added 15 hours ago
HT
Maintenance Technician
Husky Technologies
Bolton, ON
- Full-time
Clean, state-of-the-art manufacturing facilities with air quality, climate control and outstanding safety records
Added 15 hours ago
HT
Manuf. Support Technician
Husky Technologies
Bolton, ON
- Full-time
Clean, state-of-the-art manufacturing facilities with air quality, climate control and outstanding safety records
Added 16 hours ago
OA
Prototyping Workshop Technician - R&D-ANJOU, QC
Oldcastle APG
Montreal, QC
- Other
We are currently seeking a **Prototyping Workshop Technician** for our **Research & Development Center** located in **Anjou, Quebec**.
Added 21 hours ago
HT
Maintenance Technician
Husky Technologies
Bolton, ON
- Full-time
Clean, state-of-the-art manufacturing facilities with air quality, climate control and outstanding safety records
Added 21 hours ago
HT
Assembly Technician (Contract)
Husky Technologies
Bolton, ON
- Full-time
Clean, state-of-the-art manufacturing facilities with air quality, climate control and outstanding safety records
Added 21 hours ago
HT
Manuf. Support Technician
Husky Technologies
Bolton, ON
- Full-time
Clean, state-of-the-art manufacturing facilities with air quality, climate control and outstanding safety records

General Fusion Inc.

Electrical Engineer (Controls and Infrastructure)

Richmond, BC, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Posting language: English
Posted: Nov 1, 2026

Original job description

General Fusion (NASDAQ: GFUZ) is a fusion technology development company. The Company aims to deliver economical, carbon-free fusion energy through its practical Magnetized Target Fusion (“MTF”) technology, an engineering-driven approach to fusion energy. General Fusion's commercialization program is anchored by LM26, the world's first commercially relevant-scale MTF demonstration machine. The Company is working toward the commercial deployment of fusion power in the mid-2030s. General Fusion is the first publicly listed fusion company and TIME’s No. 1 GreenTech Company of 2026. For more information, visit generalfusion.com or follow General Fusion on LinkedIn, YouTube, and X.

General Fusion is searching for an Electrical Engineer with strong controls experience to join our Controls & Electronics team on our path to commercial fusion. Reporting to the Manager, Controls & Electronics, you will design, build, test, and commission the electrical and control hardware behind our one-of-a-kind experimental machines - including the high-voltage pulsed power, vacuum, gas handling, and diagnostic systems that support our plasma physics experiments. You will also support shot operations, working with operators to keep the machine running safely and repeatably through experimental campaigns.

Our machines are one-of-a-kind experiments, built and modified on tight timelines, with requirements that evolve as the physics does. We design, build, and test our own control panels in-house, and much of the work involves high-voltage and pulsed power systems, where grounding, noise, and safety need careful attention. We are looking for an engineer who is as comfortable with a wire stripper and a multimeter as with a schematic or PLC code, and who wants to see their work through from the drawing board to the experiment floor.

This is a hybrid role, but predominantly on site at General Fusion's facilities in Richmond, BC: panel building, testing, and commissioning happen in our lab and on the experiment floor. Design and documentation work can sometimes be done remotely. The role may require occasional shift work or flexible hours to support shot operations during experimental campaigns.

Design electrical and control hardware for experimental machines and supporting subsystems - power distribution, control panels, interlocks, instrumentation, and cabling - from component selection through schematics, panel layouts, I/O lists, and bills of materials.
Build, wire, and test control panels in-house alongside our technicians. Contribute towards creating standardized hardware test procedures.
Develop reusable, standardized panel designs and hardware building blocks for common needs, rather than one-offs.
Design and implement safety systems for high-voltage equipment, including E-Stop chains, interlocks, safety relays, and safety-rated I/O.
Write, test, and maintain PLC logic for interlocks, sequencing, and monitoring, along with simple operator HMIs.
Install, commission, and troubleshoot systems on the experiment floor, applying sound grounding, shielding, and noise-mitigation practices.
Support shot operations: help sequence plasma compression shots safely and repeatably, keep the machine within safe limits, respond quickly when operators need support, and feed operator input back into system improvements.
Keep as-built documentation, test records, and safety analyses current, and write quick start and troubleshooting guides so operators can resolve common issues themselves.
Ensure designs comply with the Canadian Electrical Code, CSA standards for industrial control panels, and lab safety requirements, and champion a strong safety culture.
Plan your own work packages and collaborate with physics, mechanical, electrical, and software teams to turn experimental requirements into reliable, maintainable hardware

Required:

Bachelor's degree in Electrical Engineering or equivalent, and registration (or eligibility for registration) as a Professional Engineer (P.Eng.) with EGBC.
5+ years of hands-on experience designing, building, and commissioning electrical control systems in R&D, manufacturing, or process environments, including taking control panels from schematic through build and test.
Hands-on panel building and wiring skills, and confidence with test equipment such as multimeters, insulation resistance testers, and oscilloscopes.
Practical understanding of grounding, shielding, and electrical noise in industrial or lab settings.
Strong troubleshooting skills across electrical, mechanical, and software domains.
Working knowledge of the Canadian Electrical Code and CSA requirements for industrial control panels.
PLC programming experience in IEC 61131-3 languages on at least one major platform (e.g., Beckhoff TwinCAT, Siemens, Allen-Bradley), and familiarity with industrial protocols such as EtherCAT, Modbus, and EtherNet/IP
A pragmatic, self-directed approach and the ability to deliver quality work under schedule pressure.
Clear technical communication and documentation skills.
Commitment to safe work practices in a lab or R&D environment.

Preferred:

Experience guiding or mentoring technicians.
Experience with high-voltage, pulsed power, high-current, vacuum, or cryogenic systems.
Experience designing safety circuits for high-voltage or hazardous-energy equipment, and working knowledge of machine and functional safety standards (e.g., ISO 13849, IEC 62061).
Electrical trade certification or a background as an industrial electrician or electrical technician.
Proficiency with electrical schematic capture and panel design tools (e.g., AutoCAD Electrical, EPLAN, SolidWorks Electrical).
Experience with instrumentation and data acquisition (e.g., thermocouples, pressure and vacuum gauges, flow meters).
Experience in fusion, high-energy physics, particle accelerator, semiconductor, or similar high-tech R&D facilities.
Hands-on experience with Beckhoff TwinCAT and TwinCAT HMI, LabVIEW, or Python.
Experience leading a control system redesign or migration on an operating R&D or production system.
Exposure to broader controls and data systems: SCADA, OPC UA, motion control, alarm and logging design, time-series databases, and CI/CD for controls software.

Four weeks' vacation
Ten personal days
Comprehensive benefits package
RRSP Contribution
Support for professional development
Great company culture – social events, weekly lunch program, bike rides, Sun Run, etc.

Apply About employer

More about this job

Responsibilities

You will design, build, test, and commission electrical and control hardware for experimental fusion machines, including high-voltage and diagnostic systems. Additionally, you will support shot operations and ensure all systems comply with safety standards and experimental requirements.

Requirements

Candidates must hold a Bachelor's degree in Electrical Engineering and be eligible for P.Eng. registration in BC. You need at least 5 years of hands-on experience in designing and commissioning electrical control systems in R&D or manufacturing environments.

Skills

Electrical engineering
Control systems
PLC programming
Panel design
High-voltage systems
Pulsed power
Troubleshooting
Schematic capture
Instrumentation
Grounding and shielding
CSA standards
Canadian Electrical Code
Interlocks
Safety systems
Data acquisition
Technical documentation

Benefits

Four weeks' vacation
Ten personal days
RRSP Contribution
Support for professional development
Social events
Weekly lunch program
Bike rides

Visa sponsorship

Not detected in the job text

Keywords

Electrical Engineering
Controls
Fusion
MTF
High-voltage
Pulsed power
PLC
Beckhoff TwinCAT
Siemens
Allen-Bradley
EtherCAT
Modbus
EtherNet/IP
AutoCAD Electrical
EPLAN
SolidWorks Electrical
CSA
Canadian Electrical Code
Instrumentation
Data acquisition
Vacuum systems
Cryogenic systems
Safety circuits
ISO 13849
IEC 62061
LabVIEW
Python
SCADA
OPC UA
CI/CD

Report this job