Find work in Canada.

510,909 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 1 hour ago
E
Senior R&D Engineer - Medical Device #7920
ECI
Quebec, QC
- Full-time
…(e.g., Design Change Analysis, Design Inputs, Design Outputs, Test Methods, Design Review, Design V&V, Usability Testing, Process Validation, and…
Added 2 hours ago
HT
Manufacturing Engineer (Contract)
Husky Technologies
Bolton, ON
- Full-time
…passion of our people around the world and their desire to lead change. At the same time, we are not afraid to expect a lot and strive for leadership in all of our key markets. We are a…
Added 2 hours ago
HT
PD Software for Service
Husky Technologies
Bolton, ON
- Full-time
…passion of our people around the world and their desire to lead change. At the same time, we are not afraid to expect a lot and strive for leadership in all of our key markets. We are a…
Added 2 hours ago
MT
SoC Design Engineer
Microchip Technology Inc.
Burnaby, BC · Canada - Burnaby
- Full-time
Join the Design Engineering team as Principal Engineer-Design supporting semiconductor architecture, RTL and circuit design, integration, verification, performance, power, area,…
Added 2 hours ago
D
Intermediate Electrical Designer/Engineer
Danaher
Concord, ON
- $90,000 to $103,000 CAD / year
- Full-time
Assist with or lead the build, test, troubleshooting, and integration of electronic modules and subsystems, summarizing results and ensuring performance, cost, schedule, and reliability…
Added 2 hours ago
C
Supervisor Mechanical Locomotive
CPKC
Golden, BC
- Full-time
As a Supervisor, you will take the lead in planning, scheduling, and assigning resources to ensure all repairs and servicing are completed safely, efficiently, and to the highest standards.…
Added 3 hours ago
C
Roadmaster
CPKC
Cranbrook, BC
- Full-time
Are you ready to lead and make a lasting impact? As a Roadmaster, you’ll own a critical leadership role by overseeing compliance with safety practices, policies and procedures, and guiding…
Added 3 hours ago
ES
GEN AI Developer
Epsilon Solutions Ltd.
Mississauga, ON
- Contract
Lead and enable development teams to effectively use GenAI tools and frameworks.
Added 3 hours ago
BC
Candidate to the engineering profession–Designer, Controls, Substations and Power Plants
BBA Consultants
Mont-Saint-Hilaire, QC · Mont-St-Hilaire, QC
- Full-time
Join BBA and put your experience to work by taking an active role in all project stages as a design engineer (CEP) in controls. You’ll help design control and protection systems for…
Added 3 hours ago
RI
Senior Software Development Engineer in Test (SDET)
Rose International
Mississauga, ON
- Full-time
Certified Software Test Architect / ISTQB Advanced Level (Test Automation Engineer / Technical Test Analyst).
Added 3 hours ago
K
Java Software Engineer
Kelly
Mississauga, ON
- Contract
Job Summary: Seeking a Senior Java Developer / Lead Development Analyst with 10+ years of experience to build enterprise-grade applications for Global Spread Products Risk and Capital…
Added 3 hours ago
D
Senior SDET / Quality Engineering Lead/Architect
Droisys
Brampton, ON
- Contract
We are seeking a Senior Software Development Engineer in Test (SDET) / Quality Engineering Architect to join our team. The ideal candidate will have strong experience in architecting…
Added 3 hours ago
MT
DevOps & Security Engineer
Martello Technologies
ON · Kanata, Ontario
- Full-time
As our DevOps & Security Engineer, you’ll own how Vantage DX and MPA are built, deployed, and secured. That means running the CI/CD pipelines, hardening our AWS and Azure environments, and…
Added 4 hours ago
RI
IOS mobile testing
Raas Infotek
Vancouver, BC
- Contract
Looking for an SDET – Mobility (IOS) Engineer. The team is responsible for application architecture, development and innovation of new feature development to support consumer solutions. In…
Added 4 hours ago
QC
Lead Hardware Engineer (Ottawa)
Quarry Consulting
Ottawa, ON · Greater Ottawa Metropolitan Area
- Full-time
Lead Hardware Engineer with 8+ years of direct electronics design experience, including high-speed digital design and 2+ years as a technical lead, is expected, with a bachelor's degree in…
Added 4 hours ago
K
Software Engineer in Test
Kelly
Mississauga, ON
- Contract
Role Overview: Senior SDET / Quality Engineering Architect to lead quality engineering strategy for high-throughput, low-latency trading platforms. The role involves designing scalable…
Added 4 hours ago
PC
Senior Software Development Engineer in Test (SDET) / Quality Engineering Architect
Pyramid Consulting, Inc
Mississauga, ON
- $70 to $79 CAD / hour
- Contract
Immediate need for a talented Senior Software Development Engineer in Test (SDET) / Quality Engineering Architect. This is a 06+months contract opportunity with long-term potential and is…
Added 4 hours ago
BG
Lead Civil Engineer
Brandt Group of Companies
Zehner
- Full-time
Brandt Developments has a Lead Civil Engineer position available at our Regina, Saskatchewan location. This position is responsible for the design and approval of Civil Engineering works…
Added 4 hours ago
DC
Intermediate Electrical Designer/Engineer
Danaher Corporation
Concord, ON · CAN - Concord - AB Sciex LP
- $90,000 to $103,000 CAD / year
- Full-time
Assist with or lead the build, test, troubleshooting, and integration of electronic modules and subsystems, summarizing results and ensuring performance, cost, schedule, and reliability…
Added 5 hours ago
T
Software Engineer III
TD
Toronto, ON
- Full-time
As a lead software engineer, you are accountable for shaping and delivering end-to-end solutions for enterprise-grade platforms and complex initiatives. You set technical direction, define…
Added 5 hours ago
T
Software Engineer II
TD
Toronto, ON
- Full-time
As a Software Engineer II, you provide technical expertise to implement scalable, reliable and secure solutions for EDMO Data Catalog services. You contribute to solutions that operate…
Added 5 hours ago
TE
Pipeline Integrity Engineer
TC Energy
Calgary, AB
- Full-time
The Pipeline Integrity Engineer/Technologist completes analysis of Inline Inspection data for corrosion threats on gas transmission pipelines and supports integrity program planning,…
Added 5 hours ago
Project Engineer - Hybrid Power & Electrification
Hatch
Vancouver, BC
Hatch is seeking a Senior Project Engineer to join our Power Business Unit and lead the technical delivery of hybrid power and electrification projects across Canada and internationally.
Added 5 hours ago
D
Software Engineer in Test
Dexian
Mississauga, ON
- Other
We are seeking a visionary and hands-on Senior Software Development Engineer in Test (SDET)/Quality Engineering Architect to define, champion, and drive the global quality engineering…
Added 5 hours ago
D
Software Engineer in Test
Dexian
Mississauga, ON
- Contract
Experience Level: 8–12+ years of progressive experience in software development and quality engineering, with at least 3+ years in a Lead SDET, Principal SDET, or QA Architect capacity.

Haply Robotics

Senior Software Engineer – Drone Control & Simulation (Defense and Dual-Use)

Montreal, QC, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Apr 25, 2027
Posting language: English
Posted: Oct 27, 2026

Original job description

We’re looking for a Senior Software Engineer to be the first dedicated developer behind how operators fly, train, and feel drones through haptics.

About Haply and the Mission

Haply Robotics makes haptic controllers: devices that let you feel what a machine is doing, not only see it.

We are now applying this to drones and vehicles, with defense as our first market. Armed forces and defense manufacturers are our lead customers and partners. The same technology also serves civilian uses (dual use): public safety, search and rescue, inspection and industry.

The idea is simple. Today, operators drive a drone or a vehicle with a screen and a joystick. With Haply, they also feel it: a no-go zone pushes back before they cross it, an obstacle they cannot see is felt in the hand, and the controller tells them which mode the vehicle is in. Operators learn faster, make fewer mistakes and keep their eyes on the mission.

The Role

Your mission: help Haply build this new market by building the product behind it.

The job has two pillars. Drone control: how the operator flies the drone, from direct control to assisted modes. The simulation environment: where operators train, and where the team tests and demos, before flying for real. Haptics is what makes both unique.

That product is our Drone platform: the haptic teleoperation software that connects a Haply controller to a vehicle. It sends the operator’s hand movements to the vehicle and turns what the vehicle senses into forces the operator feels. It runs both in simulation and on real vehicles with the same controls and the same feel (sim-to-real), so operators can train in simulation and then fly for real. It works with drones today and is designed for ground vehicles, boats and robotic arms too, whether the operator is remote or on board: for example, a Haply Inverse3 built into the crew station of an armored vehicle.

This is the first dedicated development role in this new initiative. You will set the technical foundations, alongside the engineer who started the Drone platform, and bring it from proof of concept to a robust, field-tested system.

You will not work alone. You will team up with a drone piloting champion who flies the tests, brings the operator’s point of view and challenges every feature in real flight. You will also work closely with the HARP teams: the Drone platform is expected to converge with HARP, Haply’s Rust-based robotics platform, so a large part of the work is shaping shared components and a common architecture with them.

You will report directly to the VP Product & Applications.

Responsibilities

Drone control: turn operator inputs into drone commands across flight modes (from direct control to assisted modes), through autopilots (ArduPilot, PX4, Betaflight) and MAVLink or RC links.
Simulation environment: select, integrate and maintain the simulator (ArduPilot or PX4 SITL, Gazebo, AirSim or Unreal-based) so operators can train and the team can test and demo in simulation, then fly for real with the same controls and the same feel (sim-to-real).
Lead the Drone platform software: its architecture, its quality and its technical roadmap.
Build the haptic features operators feel: no-go zones, obstacles, alerts, vehicle mode and behavior.
Connect the Drone platform to new vehicles: drones first, then ground vehicles and on-board crew stations.
Make it safe: predictable behavior when the radio link drops, GPS is lost or a sensor fails.
Integrate the full chain: autopilot and flight control, sensors (LIDAR, GPS, optical flow and others), radio links and video feeds, and use them to drive what the operator feels.
Test in the field with our drone piloting champion, operators and partners, and turn their feedback into improvements.
Work closely with the HARP teams: align on architecture, share components and standards, and plan the convergence with HARP.
Raise the engineering bar: tests, code review, documentation and CI, so knowledge is shared and the platform can scale.
Mentor and support other developers and contractors working on the platform.

Required Qualifications

5+ years of software engineering in a systems language (Rust, C++ or similar).
Working knowledge of Rust, or the ability to become productive in it quickly: our platform is written in Rust. You do not need to be a Rust expert.
Hands-on experience with drone flight control: ArduPilot, PX4 or Betaflight, MAVLink or RC protocols, flight modes and tuning.
Able to integrate a simulator into the platform: select a flight or vehicle simulator (ArduPilot or PX4 SITL, Gazebo, AirSim, Unreal or Unity based), connect it to the Drone platform with simulated vehicle dynamics, sensors and video, and keep it close enough to the real vehicle for training and testing.
Experience with real-time or low-latency systems such as control loops.
Hands-on hardware communication: serial, UDP/TCP, WebSocket, and reading protocol logs to debug devices and links.
Strong systems integration skills: you are comfortable making several subsystems work together end to end (autopilot and flight controller, sensors such as LIDAR, GPS and optical flow, radio links, video feeds, haptic controller) and debugging across their boundaries on the bench and in the field.
Embedded Linux experience (ARM targets such as NVIDIA Jetson or Raspberry Pi), including cross-compilation and deployment.
Working knowledge of TypeScript and React; Tauri is a strong plus.
A safety mindset: you design for failure modes, test them, and document the expected behavior.
Autonomy and ownership: you can take over an existing codebase, plan before you change it, and communicate early near hardware and safety boundaries.
Motivated to work on defense applications: you will build technology used by armed forces and work directly with military operators and defense manufacturers.
Comfortable being the first developer on a new initiative: you lay foundations, make pragmatic trade-offs between demo deadlines and long-term quality, and work across teams.

Nice to Have

Advanced Rust: async/tokio, concurrency, FFI, zero-allocation hot paths.
Flight dynamics and control: PID tuning, flight modes, assisted control.
Game engines (Unreal, Unity) for realistic simulation.
FPV ecosystems (CRSF/ExpressLRS).
Haptics, force feedback or teleoperation interfaces.
Video pipelines (GStreamer) and on-device computer vision or object detection.
Hardware-in-the-loop testing (HITL).
Protobuf schema design, plugin architectures, structured logging and profiling.
Ground vehicles and on-board integration: kinematics (wheeled, tracked), CAN bus, crew station hardware, or robotic arms.
Experience in defense, public safety, aerospace or industrial programs, or working with professional operators (military, first responders, inspection crews).
Drone pilot certification (e.g. Transport Canada basic or advanced RPAS certificate).
Bilingual French and English.
We do not expect anyone to tick every box: if you are a strong systems engineer passionate about drones and simulation, apply.

Tech Stack and Environment

Core: Rust (tokio, Cargo workspaces, FFI), protobuf, JSON and TOML configuration
Operator interface: Tauri 2, React, TypeScript
Operator station: Embedded Linux on NVIDIA Jetson; Windows and Linux for development
Vehicles: Drones (multirotor, FPV), ground vehicles and on-board crew stations; MAVLink, radio and vehicle protocols
Haptics: Haply Inverse3 and companion controllers over serial
Tooling: Git, GitLab CI, code review, mock-hardware and simulation tests

You will split your time between the Montréal office, the lab and field test sites.

Eligibility and Security Requirements

Canadian citizenship required.
Some projects, especially in defense, may require you to be eligible for registration under Canada’s Controlled Goods Program and to obtain a Government of Canada security clearance.
Willingness to travel occasionally to partner sites, test ranges and industry events, mainly in Canada and the United States.

What We Offer

A founding engineering role in Haply’s defense and dual-use program, with direct impact on product and customers.
Real hardware and real operators: you will test what you build in the field.
Competitive salary and Employee Stock Option Plan (ESOP).
Three weeks of paid vacation and 12 training days per year, 6 of your choice.
A bilingual team in downtown Montréal, with team events and weekly sports.

Interested in becoming part of our team? Learn more and apply through the link!

Apply About employer

More about this job

Responsibilities

Lead the architecture, development, and technical roadmap of the Drone platform, including drone control, simulation, haptic feedback, and integration with vehicles, sensors, autopilots, and communication links. Test and improve the system with operators in the field, coordinate shared architecture with the HARP teams, and strengthen engineering practices through testing, documentation, code review, and mentoring.

Requirements

Requires at least five years of systems software engineering experience, working knowledge of Rust, hands-on drone flight-control experience, and the ability to integrate simulators and real-time systems. Candidates should also have hardware communication and systems integration experience, embedded Linux deployment skills, working knowledge of TypeScript and React, a safety-focused approach, and Canadian citizenship.

Skills

Rust
C++
Drone Flight Control
ArduPilot
PX4
Betaflight
MAVLink
Flight Simulation
Real-Time Systems
Hardware Integration
Embedded Linux
TypeScript
React
Haptic Interfaces
Systems Integration
Safety Engineering

Benefits

Employee Stock Option Plan
Three Weeks Of Paid Vacation
12 Training Days Per Year
Team Events
Weekly Sports

Visa sponsorship

Not detected in the job text

Keywords

Rust
C++
Tokio
Protobuf
Tauri
React
TypeScript
Embedded Linux
NVIDIA Jetson
MAVLink
ArduPilot
PX4
Betaflight
Gazebo
AirSim
Unreal Engine
Unity
Haptic Feedback
Drone Control
Flight Simulation
Sim-To-Real
Real-Time Systems
Hardware-In-The-Loop Testing
MAVLink And RC Protocols
LIDAR
GPS
Optical Flow
GStreamer
CAN Bus
Controlled Goods Program

Report this job