Find work in Canada.

317,310 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 1 min ago
Quality Control Technician- Level 1
Amrize
Winnipeg, MB
…Reading precast shop drawings is preferred. ACI concrete field testing technician Grade 1 certified an asset or must pass ACI grade 1 exam in 6 months of…
Added 1 min ago
GSE Maintenance Tech - YYC
Unifi
Calgary, AB
$20 to $24 CAD / hour
The GSE Maintenance Utility Technician is an entry-level support position responsible for performing foundational mechanical tasks, preventive maintenance assistance, shop organization, and…
Added 16 mins ago
Journeyman Electrician
PTW Energy Services
Estevan, SK
Full-time
Proficient with hand tools, testing devices, and electrical equipment.
Added 16 mins ago
Assembly Technician (Contract)
Husky Technologies
Bolton, ON
Full-time
…to determine correct assembly, installation, alignment, and testing…
Added 16 mins ago
Quality Technician
Husky Technologies
Bolton, ON
Full-time
The Quality Technician Level 4 is responsible for performing inspection, testing, and quality assurance activities to ensure materials, components, and finished products meet defined…
Added 16 mins ago
Manuf. Support Technician
Husky Technologies
Bolton, ON
Full-time
…environments. If contacted in relation to a job opportunity or testing, you should advise the member of the Talent Acquisition team in a timely fashion of any disabilities that requires…
Added 16 mins ago
Assembly Technician
Husky Technologies
Bolton, ON
Full-time
…environments. If contacted in relation to a job opportunity or testing, you should advise the member of the Talent Acquisition team in a timely fashion of any disabilities that requires…
Added 16 mins ago
Manuf. Support Technician
Husky Technologies
Bolton, ON
Full-time
…environments. If contacted in relation to a job opportunity or testing, you should advise the member of the Talent Acquisition team in a timely fashion of any disabilities that requires…
Added 16 mins ago
GSE Maintenance Tech - YYC
Unifi
Calgary, AB
$36 to $40 CAD / hour
The GSE Technician is an advanced level maintenance position responsible for independently performing complex diagnostics, troubleshooting, and repairs on Ground Support Equipment (GSE).…
Added 1 hour ago
Chemistry Lab Technician RPT
Lambton College
Sarnia, ON
Internship
Added 2 hours ago
Certified Medical Device Reprocessing Technician
Alberta Health Services
Daysland, AB
Part-time
…working order, perform biological, chemical and quality assurance testing and report problems to the supervisor or…
Added 2 hours ago
Certified Medical Device Reprocessing Technician
Alberta Health Services
Grande Prairie, AB
Part-time
…working order, perform biological, chemical and quality assurance testing and report problems to the supervisor or…
Added 2 hours ago
Distribution Design Technician
BC Hydro
Victoria, BC
Full-time
May support and act as a subject matter expert related to the Design Technician role and area of expertise.
Added 3 hours ago
Journeyman HVAC Technician (Sign-on Bonus)
Boardwalk
Calgary, AB
Full-time
Valid Journeyman Certificate as an HVAC Technician, Red Seal is an asset
Added 3 hours ago
Licensed Practical Nurse - Operating Room Technician
Alberta Health Services
Calgary, AB · Greater Calgary Metropolitan Area
Part-time
The Licensed Practical Nurse Operating Room Technician (LPN ORT) assists with assessing, planning, implementing resources and evaluating the perioperative care of the patients in the…
Added 6 hours ago
Supervisor I, Equipment Operator Training and Compliance Officer
City of St. Catharines
St. Catharines, ON
Full-time
Testing and the certification of individuals in accordance with regulatory and/or operational standards to operate specific pieces of equipment.
Added 6 hours ago
Manuf. Support Technician
Husky Technologies
Bolton, ON
Full-time
…environments. If contacted in relation to a job opportunity or testing, you should advise the member of the Talent Acquisition team in a timely fashion of any disabilities that requires…
Added 6 hours ago
Assembly Technician (Contract)
Husky Technologies
Bolton, ON
Full-time
…to determine correct assembly, installation, alignment, and testing…
Added 6 hours ago
Quality Technician
Husky Technologies
Bolton, ON
Full-time
The Quality Technician Level 4 is responsible for performing inspection, testing, and quality assurance activities to ensure materials, components, and finished products meet defined…
Added 6 hours ago
Assembly Technician
Husky Technologies
Bolton, ON
Full-time
…environments. If contacted in relation to a job opportunity or testing, you should advise the member of the Talent Acquisition team in a timely fashion of any disabilities that requires…
Added 6 hours ago
Manuf. Support Technician
Husky Technologies
Bolton, ON
Full-time
…environments. If contacted in relation to a job opportunity or testing, you should advise the member of the Talent Acquisition team in a timely fashion of any disabilities that requires…
Added 6 hours ago
Pharmacy Technician, Pharmacy – Permanent Full-Time (1.0)
CHEO
Ottawa, ON
Full-time
Under a pharmacist’s supervision the Pharmacy Technician:
Added 6 hours ago
Journeyman Instrumentation - Commissioning Experience
PTW Energy Services
Prince Rupert, BC
Full-time
We are seeking a Journeyman Instrumentation Technician to join our team for a Fly In / Fly Out rotation at our Alta Gas site out of Prince Rupert, BC. The Journeyman Instrumentation…
Added 6 hours ago
Mechanical Engineering Technician
Ideal Can
Saint-Apollinaire, QC
Full-time
Under the supervision of the Plant Director, the Mechanical Engineering Technician is responsible for the design, development, maintenance and testing of production equipment related to…
Added 6 hours ago
QAQC Electrician
PTW Energy Services
Langbank, SK
Full-time
We are seeking a QAQC Electrician to join our team in Langbank, SK. This role involves testing and documenting equipment on commercial and industrial projects. Candidates should be a…

Husky Technologies

Quality Technician

Bolton, ON, Canada

Job type: Full-time
Apply by: Nov 1, 2026
Experience: 3–5 years of experience in a manufacturing or quality inspection environment
Posting language: English
Posted: Oct 2, 2026

Apply About employer

Applications open in a new tab.

Original job description

Job Description

Title: Quality Technician

Id: 21054

Type: FullTime

Location: Bolton, ON

Are you looking to join a world-class manufacturing organization? At Husky TechnologiesTM (Husky), we strive to be the best with a strong foundation built on innovation, collaboration and a unique culture with great people. We have an ambitious growth strategy that means exceptional career development opportunities and a chance to be a part of a team that is the best in the world at what we do. APPLY TODAY – join the Husky team!

Compensation

What we offer

Highly competitive wages and shift premiums for afternoon/evening and weekend shifts (pay is dependent on experience and role/level)
Excellent benefits package and retirement savings plans with company matching
Competitive vacation policy supporting work/life balance

Our Husky Campus

Clean, state-of-the-art manufacturing facilities with air quality, climate control and outstanding safety records
Onsite fitness and wellness center, with access to onsite medical practitioners
Onsite cafeterias
Only 20 minutes north of Toronto Pearson Airport

Key Requirements

Must be able to work rotating shift schedules
Must be able to commute to Bolton

The Quality Technician Level 4 is responsible for performing inspection, testing, and quality assurance activities to ensure materials, components, and finished products meet defined specifications and quality standards. This role supports production operations, ensures compliance with ISO 9001 and ISO 17025 requirements, and contributes to continuous improvement initiatives.

Key Responsibilities

Health, Safety & Compliance

Follow all company health, safety, and environmental (EHS) procedures
Use personal protective equipment (PPE) as required
Report unsafe conditions or hazards

Inspection & Testing

Perform incoming, in-process, first article, and final inspections using standard measuring tools
Perform inspections in accordance with defined sampling plans, inspection standards, and acceptance criteria
Conduct dimensional, visual, and functional inspections against drawings and specifications
Accurately Interpret engineering drawings, GD&T, tolerances, and BOMs
Operate and support CMM equipment (basic execution)
Support incoming inspection and supplier quality verification activities (as assigned)

Quality System Compliance

Execute quality procedures, inspection plans, and work instructions
Maintain accurate inspection records and documentation
Ensure traceability of materials and inspection results
Support compliance with ISO 9001 Quality Management System requirements

Non-Conformance Management

Identify, document, label, and segregate non-conforming product in designated areas (e.g., quarantine/MRB), support disposition per procedure and place product on hold when requirements are not met
Participate in root cause analysis (e.g., 5 Why, Fishbone) and support corrective and preventive actions implementation
Stop inspection release and escalate product/process risk to Quality/Engineering/Production leadership as required

Measurement Systems & Calibration

Use and verify inspection equipment in accordance with calibration requirements
Support Gage R&R and Measurement System Analysis (MSA) activities
Ensure proper handling and care of measuring equipment and tools

Data Collection & Reporting

Collect and record inspection results and quality data
Support Statistical Process Control (SPC) activities by collecting, recording, and interpreting process data under guidance, and escalating abnormal trends
Prepare inspection reports and quality documentation
Work within defined procedures and escalate non-conformances, abnormal trends, and complex issues to Quality/Engineering/Production leadership as required
Maintain confidentiality and integrity of quality and inspection data

Cross-Functional Support

Work with manufacturing, engineering, and supply chain teams to resolve issues
Provide feedback on product and process quality concerns
Support new product/process introduction activities
Collect and compile operational and quality data to support production planning and process improvement
Assist in developing manufacturing or quality procedures and specifications

Training & Continuous Improvement

Assist in training operators on inspection methods, quality standards, and proper use of measurement equipment
Participate in continuous improvement initiatives (6S, Lean), contributing to defect reduction, process stability, and operational efficiency

ISO Responsibilities

Ensure compliance with ISO 9001 requirements for product conformity, process control, and documented information
Maintain traceability and integrity of inspection and test records
Support internal and external audits by providing objective evidence and participating in corrective action follow-up
Adhere to ISO 17025 principles for measurement accuracy, calibration, and traceability (as applicable)
Ensure inspection and quality records are maintained as objective evidence for compliance and audit purposes
Ensure measurements are performed under suitable environmental and handling conditions to maintain accuracy and reliability (as applicable).

Competencies

Strong attention to detail and accuracy
Ability to interpret engineering drawings and GD&T
Basic statistical understanding (SPC, variation, control charts)
Problem-solving using structured methods (5 Why, Fishbone)
Effective communication and teamwork
Time management and ability to prioritize tasks
Adaptability in a fast-paced manufacturing environment
Understanding of quality systems and compliance requirements

Key Performance Indicators (KPIs)

Inspection accuracy and on-time completion rate
First-pass yield and defect detection effectiveness
Data accuracy and completeness of inspection records
Participation and effectiveness in corrective actions
Compliance with calibration schedules and documentation requirements

Working Conditions

Manufacturing and inspection environment
Frequent interaction with cross-functional teams
Occasional customer/supplier engagement
Standing for extended periods
Use of precision measurement equipment and tools
May require shift work and flexible work hours

Qualifications

Post-secondary education in Engineering, Quality, or a related technical field preferred
3–5 years of experience in a manufacturing or quality inspection environment
Strong working knowledge of GD&T, engineering drawings, and precision measurement tools
Basic understanding of Statistical Process Control (SPC), Measurement System Analysis (MSA), and quality systems
Hands-on experience with Coordinate Measuring Machines (CMM) for inspection or basic program execution is considered an asset
Experience with inspection software, data collection systems, or quality databases is an asset
Knowledge of ISO 9001 and ISO 17025 requirements is preferred
ASQ Certified Quality Technician (CQT) or equivalent certification is an asset

Husky TechnologiesTM offers a competitive compensation and benefits package and excellent opportunities for growth and advancement. We are committed to equal employment opportunity and respect, value and welcome diversity in our workplace. Husky Technologies TM also values being a great place to work and strives to maintain a safe workplace. Accordingly, Husky TechnologiesTM conditions all offers of employment on satisfactory completion of background checks.

Husky TechnologiesTM is committed to developing inclusive, barrier-free selection processes and work environments. If contacted in relation to a job opportunity or testing, you should advise the member of the Talent Acquisition team in a timely fashion of any disabilities that requires accommodation measures in order to enable you to be assessed in a fair and equitable manner.

Information received relating to accommodation measures will be addressed confidentially.

No agency or telephone inquiries please.

Apply About employer

More about this job

Responsibilities

Conduct incoming, in-process, first-article, and final inspections; operate measurement equipment; document results; and maintain traceability and compliance with quality procedures and ISO requirements. Identify and contain non-conforming products, support root cause analysis and corrective actions, and collaborate with production, engineering, and supply chain teams on quality and continuous improvement.

Requirements

A post-secondary education in engineering, quality, or a related technical field is preferred, along with 3–5 years of manufacturing or quality inspection experience. Candidates should have strong knowledge of GD&T, engineering drawings, and precision measurement, plus a basic understanding of SPC, MSA, and quality systems; CMM experience and ASQ CQT certification are assets.

Skills

Quality Inspection
Engineering Drawing Interpretation
Geometric Dimensioning and Tolerancing
Precision Measurement
Coordinate Measuring Machine Operation
Statistical Process Control
Measurement System Analysis
Root Cause Analysis
Corrective and Preventive Actions
ISO 9001 Compliance
ISO 17025 Principles
Calibration
Data Collection and Reporting
Problem-Solving
Communication and Teamwork
Continuous Improvement

Benefits

Competitive Wages
Shift Premiums
Benefits Package
Retirement Savings Plan With Company Matching
Competitive Vacation Policy
Onsite Fitness and Wellness Center
Onsite Medical Practitioners
Onsite Cafeterias

Visa sponsorship

Not detected in the job text

Keywords

Quality Assurance
Quality Inspection
Incoming Inspection
In-Process Inspection
First Article Inspection
Final Inspection
Engineering Drawings
Geometric Dimensioning and Tolerancing
Bill of Materials
Precision Measurement Tools
Coordinate Measuring Machine
Inspection Software
Statistical Process Control
Measurement System Analysis
Gage R&R
Calibration
ISO 9001
ISO 17025
Non-Conformance Management
Quarantine
Material Review Board
Root Cause Analysis
5 Why
Fishbone Analysis
Corrective and Preventive Actions
Traceability
Lean
6S
ASQ Certified Quality Technician
Manufacturing

Report this job