Jobs in Canada

25+ jobs

Group jobs by employerEmail me new jobs Save this search

Added 25 mins ago
VR
Residential Team – Sheet Metal Journeyman
Valley Refrigeration and Air Conditioning Ltd.
Fredericton, NB
- Internship
Added 25 mins ago
IQ
Controls system simulation MATLAB
Immigrant Québec
Montreal, QC
- Full-time
MTLS Aerostructure est une entreprise de prestation de services d’ingénierie et fabrication en aérospatiale. Nous offrons l’ensemble des consultants et services nécessaires à la conception,…
Added 25 mins ago
IQ
Avionics Technician
Immigrant Québec
Montreal, QC
- Full-time
MTLS Aerostructure est une entreprise de prestation de services d’ingénierie et fabrication en aérospatiale. Nous offrons l’ensemble des consultants et services nécessaires à la conception,…
Added 25 mins ago
IQ
Flight control laws engineer / Ingénieur Lois de commandes
Immigrant Québec
Montreal, QC
- Full-time
MTLS Aerostructure est une entreprise de prestation de services d’ingénierie et fabrication en aérospatiale. Nous offrons l’ensemble des consultants et services nécessaires à la conception,…
Added 54 mins ago
GC
Smelter Labourer
Glencore Canada
Sudbury, ON · Greater Sudbury, ON
- Full-time
The qualified applicant will be required to work a 12-hour shift schedule in a highly sensitive work environment · Applicants must possess a Grade 12 Diploma
Added 1 hour ago
UO
Scientific Machinist
University of Victoria
Victoria, BC
- Full-time
Must have a thorough knowledge of established safety practices
Added 2 hours ago
SP
Steel Structure coordinator
STEELCASE PRO
Toronto, ON
- Full-time
Knowledge of construction processes, steel fabrication and erection practices, and relevant building codes or standards.
Added 2 hours ago
F
Project Engineer - Mining & Metals
Fluor
Vancouver, BC
- Full-time
…as a leader in the Engineering, Procurement, Construction, Fabrication, and Maintenance industry. Our focus on innovation and providing cost-effective technology-based solutions is second…
Added 2 hours ago
F
Structural Material Controller
Fluor
Vancouver, BC
- Full-time
…as a leader in the Engineering, Procurement, Construction, Fabrication, and Maintenance industry. Our focus on innovation and providing cost-effective technology-based solutions is second…
Added 2 hours ago
F
Civil Material Controller
Fluor
Vancouver, BC
- Full-time
…as a leader in the Engineering, Procurement, Construction, Fabrication, and Maintenance industry. Our focus on innovation and providing cost-effective technology-based solutions is second…
Added 3 hours ago
E
mechanical assemblers lead hand
Extrucan
Drummondville, QC
- Full-time
Night shift premium
Added 3 hours ago
A
Concepteur Doutillage
Actalent
Longueuil, QC
- $32 to $50 CAD / hour
- Contract
Nous recherchons une personne expérimentée en conception mécanique pour développer et modifier des outillages utilisés dans des environnements de fabrication, dassemblage et dessais.
Added 3 hours ago
A
Spécialiste, Interopérabilité 3D Et Transformation Numérique Manufacturière
Actalent
Longueuil, QC
- $40 to $46 CAD / hour
- Contract
…sur le modèle dans les activités de définition de produit, de fabrication et…
Added 3 hours ago
IG
Bulletproof and Retrofitted Motor Vehicle Assembly Coordinator (NOC 92020)
INKAS® Group
Toronto, ON · North York, ON
- Internship
Added 3 hours ago
C&
Maintenance Mechanic
Cain & Associates
Vancouver, BC
- Full-time
Schedule: Rotating Shifts (Days, Afternoons & Nights) · Must be available to work rotating day, afternoon, and night shifts, including occasional weekends and call-outs
Added 3 hours ago
E
mechanical assembler
Extrucan
Drummondville, QC
- Full-time
Night shift premium
Added 3 hours ago
S
Directeur production
St-Amour
Montreal, QC
- $100,000 to $130,000 CAD / year
- Full-time
Optimiser les processus de fabrication et mettre en place des initiatives d’amélioration continue.
Added 3 hours ago
WC
Outside Sales Representative (Metal) - Brampton, ON
Wurth Canada
Brampton, ON
- Full-time
…(farming/agriculture, trucking, construction leasing) municipalities, Metal – fabrication, welding, HVAC/plumbing, manufacturing, etc., Construction – General Contractors, and…
Added 3 hours ago
PJ
Technicien(ne) de maintenance industrielle
Pâtisseries Jessica Inc.
Montreal, QC
- Full-time
Effectuer des travaux de soudure, de meulage et de fabrication au besoin
Added 3 hours ago
R
Gestionnaire de fabrication – Lignes d’assemblage / Manufacturing Line Manager – Assembly Lines
RTX
Mirabel, QC
- Full-time
Titre du poste : Gestionnaire de fabrication – Lignes d’assemblage
Added 4 hours ago
AI
Project Coordinator - Minimum 5 years in door, hardware industry
Allmar Inc.
Winnipeg, MB
- $68,000 to $75,000 CAD / year
- Full-time
5 years of industry experience required
Added 4 hours ago
MC
Production Supervisor, Blend and Fill / Superviseur(e) de production, Formulation et Remplissage
Merck Canada
Charlottetown, PE
- Internship
Must be available on-call up to 12 hours per day, 7 days per week for emergency situations
Added 4 hours ago
DO
Mechanical Engineer
Design Observer
Squamish, BC
- Full-time
Prototyping & Hands-On Fabrication: Test, evaluate, and validate design hypotheses
Added 4 hours ago
H
Concepteur Mecanique / Mechanical Designer
Hitachi
Varennes, QC · (HE)Office_QC, Varennes
- Full-time
…conception d’ingénierie de bout en bout, afin de soutenir l’usine de fabrication. Ce poste offre des occasions d’apprentissage approfondi et expérientiel dans différents volets…
Added 5 hours ago
CE
Aerospace Materials & Processes (M&P) Specialist - Adhesive and Sealants
Capgemini Engineering
Montreal, QC
- Full-time
Lieu : Mirabel (3 jours au bureau) Hybride

Immigrant Québec

Avionics Technician

Montreal, QC, Canada

Full-time

Apply on LinkedIn About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Dec 10, 2026
Posting language: English · French
Posted: Nov 10, 2026

Original job description

English section of this bilingual listing.

If you're looking to grow in a dynamic environment, take on technical challenges at the heart of future-oriented projects, and demonstrate your precision, autonomy, and technical know-how, this opportunity is for you.

Perform modifications, installations, and mounting of electrical and electronic components on various aircraft structures.
Interpret and follow technical documentation, wiring diagrams, and electrical schematics to carry out electrical, electronic, or electromechanical assemblies and modifications.
Connect wires and components as part of electrical equipment assembly.
Carry out electrical connections: wire stripping, crimping, connector assembly, and cable sleeving for control and electromechanical systems.
Verify the technical compliance of units prior to inspection.
Modify and install electrical harnesses.
Apply the QHSE (Quality, Health, Safety, Environment) management system and comply with all applicable processes, procedures, and work instructions.
Report any non-conformities or anomalies encountered.
Understand and apply operational rules, procedures, and processes, and know where to access them.
Ensure work complies with both general and specific standards outlined in technical documentation.
Adhere to safety regulations specific to assigned tasks. Use personal and environmental protective equipment appropriately. Refer to technical data sheets and safety instructions for materials used.
Use the provided tools and equipment to perform assigned tasks.

Profil Recherché

Technical training in electrical engineering, electronics, or a related field.
Experience in the aerospace or industrial sector (an asset).
Proficiency in reading electrical schematics and using wiring tools.
Strong attention to detail, autonomy, teamwork, and a sense of responsibility.
Knowledge of safety and quality standards in the aerospace environment.
Proficiency in French (spoken and written); technical English is an asset.

Read the full bilingual original

We are seeking an Avionics Technician to join our team at MTLS Aérostructure, an innovative aerospace company headquartered in Montreal, operating globally, primarily across North America and Europe. Our mission is to exceed client expectations through a proactive and collaborative approach throughout project lifecycles, while showcasing the expertise of our team members.

If you're looking to grow in a dynamic environment, take on technical challenges at the heart of future-oriented projects, and demonstrate your precision, autonomy, and technical know-how, this opportunity is for you.

Perform modifications, installations, and mounting of electrical and electronic components on various aircraft structures.
Interpret and follow technical documentation, wiring diagrams, and electrical schematics to carry out electrical, electronic, or electromechanical assemblies and modifications.
Connect wires and components as part of electrical equipment assembly.
Carry out electrical connections: wire stripping, crimping, connector assembly, and cable sleeving for control and electromechanical systems.
Verify the technical compliance of units prior to inspection.
Modify and install electrical harnesses.
Apply the QHSE (Quality, Health, Safety, Environment) management system and comply with all applicable processes, procedures, and work instructions.
Report any non-conformities or anomalies encountered.
Understand and apply operational rules, procedures, and processes, and know where to access them.
Ensure work complies with both general and specific standards outlined in technical documentation.
Adhere to safety regulations specific to assigned tasks. Use personal and environmental protective equipment appropriately. Refer to technical data sheets and safety instructions for materials used.
Use the provided tools and equipment to perform assigned tasks.

Profil Recherché

Technical training in electrical engineering, electronics, or a related field.
Experience in the aerospace or industrial sector (an asset).
Proficiency in reading electrical schematics and using wiring tools.
Strong attention to detail, autonomy, teamwork, and a sense of responsibility.
Knowledge of safety and quality standards in the aerospace environment.
Proficiency in French (spoken and written); technical English is an asset.

Présentation De La Structure

MTLS Aerostructure est une entreprise de prestation de services d’ingénierie et fabrication en aérospatiale. Nous offrons l’ensemble des consultants et services nécessaires à la conception, la modification et la fabrication d’Aéronefs, à toutes les étapes du cycle de produit, allant de l’avant-projet (R&D) au support à la fabrication.

Nos Pôles D’expertise Sont

Structures (calcul et conception)
Systèmes (architecture, fonctionnel, calcul et conception)
Industrialisation 4.0 et outillages
Électrification des transports (systèmes de propulsion, commandes de vol, avionique,... )
Support à la certification

Zones d'exportation: Amérique du Nord, Europe Occidentale,

Service Aérospatial: Militaire, Civil

Types d'Avions desservis: Voilure fixe, Voilure tournante, UAV, aéronefs électriques et hybrides, dirigeables,

Sous-secteurs de l'Aviation: Cellule, moteurs, train d'atterrissage, systèmes

Apply on LinkedIn About employer

More about this job

Responsibilities

Install, modify, and assemble electrical, electronic, and electromechanical components and harnesses on aircraft structures, following technical documentation and wiring schematics. Verify technical compliance, follow QHSE and safety procedures, use tools and protective equipment appropriately, and report non-conformities or anomalies.

Requirements

Technical training in electrical engineering, electronics, or a related field is required; aerospace or industrial experience is an asset. Candidates should be able to read electrical schematics and use wiring tools, demonstrate attention to detail, autonomy, teamwork, and responsibility, and know aerospace safety and quality standards; French proficiency is required, while technical English is an asset.

Skills

Aircraft Avionics Installation
Electrical and Electronic Assembly
Electrical Schematics
Wiring Diagrams
Wire Stripping and Crimping
Connector Assembly
Cable Sleeving
Electrical Harness Modification
Technical Documentation Interpretation
Technical Compliance Verification
Aerospace Safety and Quality Standards
QHSE Compliance
Attention to Detail
Autonomy
Teamwork

Visa sponsorship

Not detected in the job text

Keywords

Avionics
Aircraft Structures
Electrical Components
Electronic Components
Electromechanical Assemblies
Electrical Schematics
Wiring Diagrams
Technical Documentation
Electrical Connections
Wire Stripping
Crimping
Connector Assembly
Cable Sleeving
Electrical Harnesses
Technical Compliance
QHSE
Quality Management
Aerospace Safety
Protective Equipment
Technical Data Sheets
Aircraft Modification
Aerospace Manufacturing

Report this job

Work requirements

Jobs in Canada