Controls system simulation MATLAB
- Montreal, QC, Canada
Full-time
Applications open in a new tab.
Job details
- Job type
- Full-time
- Apply by
- Experience
- You have a minimum of 10 years of experience in aerospace.
- Posting language
- English · French
- Posted
Original job description
English section of this bilingual listing.
In Your Duties, You Will Be Called Upon To
- Generate and update models of the flight control system including test capabilities and interfaces
- Perform technical evaluation by simulation of the flight control system servo-loop performance characteristics, including loaded rate, frequency response, accuracy, etc.
- Make design recommendations to allow design compliance with the performance requirements
- Support technical review of servo-loop monitor performance and robustness
- Review design data and analysis provided by the component suppliers
- Support technical reviews associated with the flight control system safety coverage
- Conduct technical investigations, analyze and develop solutions
- Participate in the testing activities on the Simulation platform and Integrated Systems Test Certification Rig (Iron Bird).
- Preparing, conducting the test and analyzing test results
- Perform requirement validation by simulation
- Coordinate with the other aircraft technical disciplines integration of the aircraft requirements to support the design process.
- Prepare and review technical reports, for example reports supporting technical requirements validation and verification. Simulation may be required for requirements validation completeness.
- Review and approve the suppliers design through participation in the supplier's development, design, manufacture, integration, and verification process.
Profil Recherché
As the ideal candidate:
- You are expert in the field of servo-loop control and performance of electro-hydraulic actuators
- You have a good knowledge of the specification, design, integration, test and certification of Flight control systems and/or its components.
- You master the principles of physics associated with structural dynamics, hydraulics and control systems
- You have experience in performing feasibility studies to support the decision process
- You are proactive and have an interest in aerospace Industry and systems integration.
- You hold a University degree in Mechanical, Aerospace Engineering or equivalent in a recognized University.
- You have a minimum of 10 years of experience in aerospace.
- You are familiar with Part FAR25 / 525 certification process.
- You have experience with FBW system (considered as an asset).
- You have strong communication skills in French and English (written and spoken).
- You have good organizational & planning skills.
- You have significant experience in simulation with Matlab software.
- You are a team player, but you are also able to work individually. You can deliver quality even under a challenging environment.
- Knowledge of the ARP4754, DO254, DO178 processes and of DO-160 qualification requirements are considered an asset.
Read the full bilingual original
In Your Duties, You Will Be Called Upon To
As the ideal candidate:
MTLS Aerostructure est une entreprise de prestation de services d’ingénierie et fabrication en aérospatiale. Nous offrons l’ensemble des consultants et services nécessaires à la conception, la modification et la fabrication d’Aéronefs, à toutes les étapes du cycle de produit, allant de l’avant-projet (R&D) au support à la fabrication.
Nos Pôles D’expertise Sont
Service Aérospatial: Militaire, Civil
Types d'Avions desservis: Voilure fixe, Voilure tournante, UAV, aéronefs électriques et hybrides, dirigeables,
Sous-secteurs de l'Aviation: Cellule, moteurs, train d'atterrissage, systèmes
- Generate and update models of the flight control system including test capabilities and interfaces
- Perform technical evaluation by simulation of the flight control system servo-loop performance characteristics, including loaded rate, frequency response, accuracy, etc.
- Make design recommendations to allow design compliance with the performance requirements
- Support technical review of servo-loop monitor performance and robustness
- Review design data and analysis provided by the component suppliers
- Support technical reviews associated with the flight control system safety coverage
- Conduct technical investigations, analyze and develop solutions
- Participate in the testing activities on the Simulation platform and Integrated Systems Test Certification Rig (Iron Bird).
- Preparing, conducting the test and analyzing test results
- Perform requirement validation by simulation
- Coordinate with the other aircraft technical disciplines integration of the aircraft requirements to support the design process.
- Prepare and review technical reports, for example reports supporting technical requirements validation and verification. Simulation may be required for requirements validation completeness.
- Review and approve the suppliers design through participation in the supplier's development, design, manufacture, integration, and verification process.
As the ideal candidate:
- You are expert in the field of servo-loop control and performance of electro-hydraulic actuators
- You have a good knowledge of the specification, design, integration, test and certification of Flight control systems and/or its components.
- You master the principles of physics associated with structural dynamics, hydraulics and control systems
- You have experience in performing feasibility studies to support the decision process
- You are proactive and have an interest in aerospace Industry and systems integration.
- You hold a University degree in Mechanical, Aerospace Engineering or equivalent in a recognized University.
- You have a minimum of 10 years of experience in aerospace.
- You are familiar with Part FAR25 / 525 certification process.
- You have experience with FBW system (considered as an asset).
- You have strong communication skills in French and English (written and spoken).
- You have good organizational & planning skills.
- You have significant experience in simulation with Matlab software.
- You are a team player, but you are also able to work individually. You can deliver quality even under a challenging environment.
- Knowledge of the ARP4754, DO254, DO178 processes and of DO-160 qualification requirements are considered an asset.
MTLS Aerostructure est une entreprise de prestation de services d’ingénierie et fabrication en aérospatiale. Nous offrons l’ensemble des consultants et services nécessaires à la conception, la modification et la fabrication d’Aéronefs, à toutes les étapes du cycle de produit, allant de l’avant-projet (R&D) au support à la fabrication.
Nos Pôles D’expertise Sont
- Structures (calcul et conception)
- Systèmes (architecture, fonctionnel, calcul et conception)
- Industrialisation 4.0 et outillages
- Électrification des transports (systèmes de propulsion, commandes de vol, avionique,... )
- Support à la certification
Service Aérospatial: Militaire, Civil
Types d'Avions desservis: Voilure fixe, Voilure tournante, UAV, aéronefs électriques et hybrides, dirigeables,
Sous-secteurs de l'Aviation: Cellule, moteurs, train d'atterrissage, systèmes
More about this job
Responsibilities
Generate and update flight control system models, simulate servo-loop performance, validate requirements, and recommend design changes to meet performance requirements. Participate in simulation and Iron Bird testing, analyze results, review supplier designs and technical data, and coordinate system integration and certification activities.
Requirements
Requires a university degree in mechanical or aerospace engineering (or equivalent), at least 10 years of aerospace experience, significant MATLAB simulation experience, and expertise in servo-loop control and electro-hydraulic actuator performance. Candidates should know flight control system design, integration, testing, and certification, including FAR 25/525; fly-by-wire and ARP4754, DO-254, DO-178, and DO-160 knowledge are assets, and strong French and English communication skills are requested.
Skills
- MATLAB Simulation
- Servo-Loop Control
- Electro-Hydraulic Actuators
- Flight Control Systems
- Control Systems
- Structural Dynamics
- Hydraulics
- System Integration
- Simulation Testing
- Requirements Validation
- Performance Analysis
- Safety Analysis
- FAR 25/525 Certification
- Fly-By-Wire Systems
- Technical Reporting
- Supplier Design Review
Visa sponsorship
Not detected in the job text
Categories
- Engineering
- Transportation
- Technology
Keywords
- MATLAB
- Flight Control Systems
- Servo-Loop Performance
- Electro-Hydraulic Actuators
- Simulation
- Loaded Rate
- Frequency Response
- Performance Accuracy
- Control Systems
- Structural Dynamics
- Hydraulics
- Requirements Validation
- Requirements Verification
- Iron Bird
- Integrated Systems Test Certification Rig
- System Integration
- Supplier Design Review
- Safety Coverage
- FAR 25/525
- Fly-By-Wire
- ARP4754
- DO-254
- DO-178
- DO-160
- Aerospace Engineering
- Feasibility Studies
- Flight Control System Certification