Find work in Canada.

580,264 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 57 mins ago
J
Entry Level Environmental Engineer/Scientist/Geologist
Jacobs
Kitchener, ON
- $58,656 to $86,000 USD / year
- Full-time
…a difference. We are seeking an Early Career Environmental Engineer, Geologist, or Scientist to join our Toronto or Kitchner office and support site characterization, remediation, and…
Added 57 mins ago
J
Entry Level Environmental Engineer/Scientist/Geologist
Jacobs
Toronto, ON
- $58,656 to $86,000 USD / year
- Full-time
…a difference. We are seeking an Early Career Environmental Engineer, Geologist, or Scientist to join our Toronto or Kitchner office and support site characterization, remediation, and…
Added 57 mins ago
Senior Project Engineer - Engineering
Give and Go Prepared Foods
Toronto, ON
Completion of university degree in Engineering or a related field
Added 1 hour ago
EA
Controls & Field Service Technician
EVS Automation Ltd
Burnaby, BC
- Full-time
Controls & Field Service Technician (Intermediate)
Added 1 hour ago
GA
Solutions Engineer Intern
Geekplus America Inc
Markham, ON
- Internship
…Engineering Science, Computer Science, or a related technical…
Added 2 hours ago
Q
Optical Systems Validation Engineer
Qualcomm
Ottawa, ON
- Full-time
Bachelor's degree in Science, Engineering, or related field.
Added 3 hours ago
V
Lead Civil / Structural Design Engineer
Vale
Canada
- Full-time
We are currently seeking a Lead Civil / Structural Design Engineer, to join our Central Engineering team in Sudbury. This is a permanent onsite position. This posting is for an existing…
Added 3 hours ago
V
Engineer - Ground Control
Vale
Canada
- Full-time
We are currently seeking an Engineer, Geomechanics to join the Vale Base Metals CTO Geotechnical Office’s Geomechanics Studies team based in Sudbury, Ontario, Canada. This is a permanent…
Added 3 hours ago
V
Lead Ground Control Engineer
Vale
Sudbury, ON · Greater Sudbury, ON,CA
- Full-time
We are currently seeking a Lead Ground Control Engineer, to join our Mines Technical Services team in Sudbury. This is a permanent position onsite working Monday to Friday. This posting is…
Added 3 hours ago
Q
Machine Learning Engineer, AI Software (C++)
Qualcomm
Markham, ON
- Full-time
Bachelor's degree in Computer Science, Engineering, Information Systems, or related field.
Added 3 hours ago
QL
Building Code Consultant
QAI Laboratories
Burnaby, BC
- Full-time
Professional Engineer (P.Eng.) or Engineer in Training (EIT) license required with an ability to obtain P.Eng. within one year of hire if an EIT.
Added 3 hours ago
HI
Senior Data Engineer/ETL Developer
HRbrain Inc.
Toronto, ON
- Full-time
1st Senior Data Engineer, 10+ years Experience
Added 4 hours ago
CC
Design Engineer, Electrical
Cameco Corporation
Port Hope, ON
- Full-time
…You may be required to manage some projects related to your field of expertise from conception through to implementation. You provide specialized technical information and guidance ensuring…
Added 4 hours ago
TU
Assistant Professor (tenure-track)
The University of British Columbia
Vancouver, BC
- Full-time
Applicants must hold a PhD in Mining Engineering or a closely related field (e.g., Mineral Processing, Mechanical Engineering, Industrial Engineering, or Geological Engineering), along with…
Added 4 hours ago
A
Senior Software Engineer
AspiringIT
Kitchener, ON
- Full-time
Aspiring IT Inc. is seeking an experienced Senior Software Engineer to design, develop, integrate, and maintain scalable software applications and cloud-based systems.
Added 4 hours ago
SS
Electrical Engineer-In-Training
Sunbelt Solomon
Saskatoon, SK
- Full-time
We are seeking a motivated Electrical Engineer in Training (EIT) to join our Engineering team. This role focuses on electrical systems design, including protection, control, and electrical…
Added 4 hours ago
GV
Candidat à la profession d'ingénieur électrique systèmes auxiliaires – Hydro Amérique du Nord / Auxiliary Systems EIT Electrical Engineer – Hydro North America
GE Vernova
Brossard, QC
- Full-time
The Systems Engineer will be responsible for the integrated design, coordination, and technical support of both electrical and mechanical auxiliary systems associated with hydro-generator…
Added 4 hours ago
E
Ingénieur de projet – Développement de produits pour véhicules connectés (Gestion technique de projets) / Project Engineer – Connected Vehicle Product Development (Technical Project Management)
Expleo
Valcourt, QC
- Contract
…www.expleogroup.com._________________________________________________________________________________________________________________________________________________________________________…
Added 4 hours ago
C
Senior Electrical Buildings Engineer
CIMA+
Edmonton, AB
- Full-time
At CIMA+, you’ll find a place where your ideas and perspectives are welcomed and encouraged. In both the field and at the office, you’ll get plenty of opportunities to reach your full…
Added 4 hours ago
B
Project Engineer – Major Projects | Canada & USA
Barnard
NL · Newfoundland and Labrador, Canada
- Full-time
…As part of the engineering team for the project, the Project Engineer will participate in team meetings, work collaboratively to achieve the strategic objectives of the project, and assist…
Added 4 hours ago
PH
Founding Engineer
Prometheus Health Systems
Remote, Canada
- $150,000 to $190,000 CAD / year
- Full-time
- Remote
…from documents already in a patient's chart. Every drafted field cites its source. Professional judgments are left to the physician, who reviews and signs every…
Added 4 hours ago
AC
Engineer, Project
AVI-SPL Canada
Montreal, QC
- Full-time
As a Project Engineer, you will oversee the technical delivery of AV Integration projects. You will review new projects, finalizing documentation such as the bill of materials, drawings,…
Added 4 hours ago
G
Service Sales Engineer
GRUNDFOS
Oakville, ON
- Full-time
As our new Service Sales Engineer in Oakville, ON, you'll be providing technical and commercial aftermarket support to customers - preparing quotations, coordinating service projects, and…
Added 4 hours ago
S
Quality Engineer, Co-op
Stryker
Burnaby, BC
- Full-time
…monitor product performance, trends and risk of products in the field. In addition to conducting post market surveillance activities, the Quality Engineering Co-op will also help support in…
Added 4 hours ago
A
Track / Railway Engineer
AtkinsRéalis
Calgary, AB · Toronto, ON
- Full-time
Provide construction support services including shop drawing reviews, RFIs, non‑conformance reports, as‑built survey analysis, etc; perform occasional field engineering services.

Invest Ottawa

Engineer, Design and Fabrication

Ottawa, ON, K1Y 2C5, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Experience: Minimum 3 to 5 years of practical fabrication experience spanning more than one discipline among machining, electronics, embedded systems, and additive manufacturing
Posting language: English
Posted: Nov 3, 2026

Original job description

ENGINEER, DESIGN AND FABRICATION

INVEST OTTAWA – AREA X.O

Reporting to the Engineering Manager, Programs at Area X.O, the Engineer, Design and Fabrication is responsible for establishing and operating the Area X.O design and fabrication lab and serves as its primary technical resource. The lab spans machining and metalwork, electronics and simple printed circuit board fabrication and assembly, embedded systems, and additive manufacturing. The role requires direct operation of shop and fabrication equipment, not specification and oversight alone. Its primary purpose is to enable rapid prototyping and accelerated development for the client companies, startups, and SMEs engaged at Area X.O, converting concepts, requirements, and failed or incomplete hardware into physical articles that can be tested and iterated within compressed development timelines. The Engineer, Design and Fabrication is also responsible for the safe operation of the lab, including equipment selection and commissioning, operating procedures, user training and authorization, and ongoing safety management.

Work Model:

In person role at our Area X.O site located in Nepean

Corporate Pay Band D: $76,000 - $114,000

Hiring Salary Range: $76,000 - $104,500 (Segment 1 - Segment 2)

Reason for Opening:

This is an anticipated role. The position is contingent on confirmation of program funding, and posting does not guarantee that the role will be filled. Applicants will be notified of any change in status.

WHAT YOU WILL BE DOING

Client Collaboration & Communication

Work directly with client companies, engineers, and researchers to establish build objectives and translate loosely defined requirements into a manufacturable design and a realistic build plan
Advise on design for manufacturability, material and process selection, tolerances, cost, and lead time, and explain trade-offs clearly to audiences without a fabrication background
Collaborate with integration, field support, and test and evaluation engineers on parts, fixtures, enclosures, mounts, and test hardware
Support tours, demonstrations, and client-facing activities involving the lab

Prototyping & Fabrication

Produce prototype parts, assemblies, and small production runs across the full range of lab capability
Machine and fabricate metal parts: operate manual and CNC milling and turning equipment, and perform sheet metal work, drilling, cutting, joining, finishing, and assembly to drawing and to tolerance
Design, fabricate, assemble, and rework circuit boards, including through-hole and surface-mount components, wiring harnesses, and cable assemblies, and bring up, test, and debug electronic hardware
Develop embedded systems: select microcontrollers and modules, write and flash firmware, interface sensors and actuators, and debug hardware and software together at the bench
Prepare, print, post-process, and iterate additive manufacturing parts across available processes and materials, and choose between additive, subtractive, and off-the-shelf solutions
Produce and modify CAD models, drawings, and CAM programs, apply design for manufacturability and assembly, and reverse-engineer or repair existing hardware where no documentation exists
Diagnose and resolve machine, tooling, process, material, and quality problems
Develop workable solutions under schedule pressure where no established approach exists, without compromising safety or the validity of the result

Lab Setup, Safety & Operations

Set up and commission the lab, including layout, workflow, equipment specification, procurement support, installation, calibration, and acceptance
Own lab safety management: hazard assessment, written safe operating procedures, machine guarding, pre-start health and safety reviews, lockout/tagout, ventilation and fume extraction, ESD control, personal protective equipment, and chemical and material handling and disposal
Ensure compliance with applicable occupational health and safety legislation and organizational policy
Establish and administer machine-specific training and authorization for all users, and maintain a current register of user qualifications
Maintain preventive maintenance schedules, tooling, consumables, spares, and material inventory
Administer the job intake queue and prioritize competing work across concurrent client projects and program deadlines
Support capital and operating budget planning for the lab

Leadership & Standards

Serve as the technical authority for fabrication at Area X.O, and promote an iterative, prototype-driven approach across the team and client base
Establish and uphold standards for workmanship, documentation, and shop discipline
Train, qualify, and supervise staff and, where appropriate, client personnel in equipment use, with the authority to suspend unsafe work
Identify opportunities to expand lab capability through new equipment, processes, materials, or techniques, and develop the supporting business case
Pursue continuous improvement in turnaround time, repeatability, and cost of prototyping work

Relationships & Partners

Serve as the primary point of contact for client companies using the lab, and build relationships that support sustained and repeat engagement
Advise clients on the capabilities available through the lab and the wider Area X.O site, and refer them to other capabilities and staff where appropriate
Maintain relationships with suppliers, machine shops, board houses, and specialist vendors for work beyond in-house capability, and manage outsourced activities
Protect client intellectual property and maintain confidentiality when working on client designs

Documentation & Reporting

Maintain design files, drawings, CAM programs, firmware, bills of material, and build records under version control to ensure work is reproducible
Document processes, settings, and lessons learned to retain capability at the organizational level
Track job intake, effort, materials, and turnaround time, and report on lab utilization and client activity in support of program reporting
Maintain safety, training, inspection, and maintenance records, and record test and validation results for parts and assemblies produced in the lab

WHAT YOU HAVE ACCOMPLISHED/GAINED THROUGHOUT YOUR CAREER

Post-secondary degree or diploma in mechanical, mechatronics, manufacturing, electrical, or electronics engineering or engineering technology, or a relevant skilled trade qualification such as machinist or electronics technologist, or an equivalent combination of education and relevant hands-on experience
Must be a Canadian citizen and capable of attaining and maintaining Secret-level security clearance
Minimum 3 to 5 years of practical fabrication experience spanning more than one discipline among machining, electronics, embedded systems, and additive manufacturing
Demonstrated ability to personally operate shop and fabrication equipment to a professional standard
Demonstrated CAD and, where applicable, CAM experience
Breadth across fabrication disciplines, with the ability to move between machining, electronics assembly, embedded development, and additive manufacturing within a single work period, and depth in at least one
Practical machining ability, including workholding, tooling, feeds and speeds, measurement and inspection, and working to tolerance
Electronics fabrication ability, including schematic capture and simple PCB layout, through-hole and surface-mount assembly and rework, harnessing, and use of oscilloscopes, meters, and power supplies for bring-up and debug
Embedded development ability in C/C++ or MicroPython on common microcontroller platforms, including interfacing over I2C, SPI, UART, CAN, and USB
Additive manufacturing ability across FDM and resin processes, including material selection, print preparation, failure diagnosis, and post-processing
Proficiency in a mainstream CAD package such as SolidWorks, Fusion 360, or Onshape
Strong design for manufacturability judgment, including selecting the most expedient process adequate to the requirement
Resourceful problem solving, with demonstrated ability to produce novel hardware from an incomplete specification
Thorough understanding of shop safety, machine guarding, hazardous materials, and applicable occupational health and safety requirements, with the willingness to enforce them
Strong organizational ability and capacity to manage competing jobs against deadlines
Clear communication with clients of varying technical backgrounds
Familiarity with Git or equivalent version control for design and firmware files

ASSETS

Experience setting up, running, or managing a shop, makerspace, prototyping lab, or similar facility, including safety responsibility
Experience supporting external clients or working in a prototyping, R&D, or product development environment
Applicable trade certification, machine-specific tickets, or occupational health and safety certification
Familiarity with CAM programming

Do you have some of these skills but maybe not all? We still encourage you to apply, as we would love to review your unique application and learn more about you!

At Invest Ottawa and Bayview Yards, we know that diversity, inclusion and a sense of belonging are critical success factors for globally competitive organizations and are required to drive sustainable wealth creation and prosperity across our region. We prioritize the creation of an inclusive culture and infuse diversity into our programs, operations and governance. As an equal opportunity employer that doesn’t simply accept difference but celebrates, supports and thrives because of it, we invite all qualified candidates to apply, and especially encourage those who identify as members of underrepresented groups. IO and Bayview Yards are determined to provide a barrier-free work environment, starting with the hiring process. If you require accommodation during any phase of the evaluation process, please contact hr@investottawa.ca to request specialized accommodation. All information received in relation to accommodation will be kept confidential. At Invest Ottawa and Bayview Yards, we are focused on doing better and committed to leading by example because it’s what’s best for us, our culture and our community.

We may use an AI-enabled assistant to take notes during our recruitment process to help our team stay present and engaged during interviews. The tool does not screen, assess, or select applicants, and all hiring decisions are made by people. We welcome inquiries about AI use and/or requests for accommodations at any stage of the hiring process. Personal information (including recordings, transcripts, and summaries) is safeguarded in line with our privacy policy and applicable Ontario privacy legislation.

Apply About employer

More about this job

Responsibilities

The Engineer, Design and Fabrication will operate and manage the Area X.O design and fabrication lab to enable rapid prototyping for client companies. This role involves direct fabrication of hardware, equipment maintenance, and providing technical guidance to clients on design and manufacturability.

Requirements

Candidates must possess a post-secondary degree, diploma, or trade qualification in a relevant engineering or technical field with 3 to 5 years of practical experience. Applicants are required to be Canadian citizens capable of obtaining a Secret-level security clearance.

Skills

Machining
Electronics fabrication
Embedded systems
Additive manufacturing
CAD
CAM
Prototyping
PCB layout
Firmware development
C/C++
MicroPython
SolidWorks
Fusion 360
Onshape
Design for manufacturability
Shop safety

Visa sponsorship

Not detected in the job text

Keywords

Machining
Electronics
Embedded Systems
Additive Manufacturing
Prototyping
CAD
CAM
SolidWorks
Fusion 360
Onshape
PCB Fabrication
Firmware
C++
MicroPython
CNC Milling
Turning
Sheet Metal
Design for Manufacturability
Shop Safety
Hazard Assessment
Lockout/Tagout
Git
Version Control
R&D
Hardware Debugging
Oscilloscopes
Wiring Harnesses
Mechatronics
Manufacturing Engineering
Electronics Technology

Report this job