Find work in Canada.

A simpler way to find your next job.

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 1 min ago
VE
Spécialiste mise en route / Commissioning Specialist
Veolia Environnement SA
Montreal, QC
- Full-time
Take responsibility for and understand the treatment process design, and recommend solutions to engineering problems
Added 1 min ago
OP
Manager, Engineering and System Planning
Oshawa Power
Oshawa, ON
- Full-time
Reporting to the Vice President, Engineering & Operations, the Manager, Engineering & System Planning will provide strategic and technical leadership in the planning, design,…
Added 1 min ago
AS
Electrical Engineer
Alliance Search Partners
Mississauga, ON
- Full-time
Our Customer is seeking an experienced MV/HV & Substation Engineering Program & Team Leader to lead and scale our portfolio of medium-voltage (MV), high-voltage (HV), substation, protection…
Added 1 min ago
IE
Manager, Supply Chain & Innovation
IMAX Enhanced | Streaming & Consumer Technology
Mississauga, ON
- Full-time
…the information and visibility required to effectively manage operations and make timely decisions. Lead the design and implementation of dashboards, scorecards, exception reporting and…
Added 1 min ago
CH
Senior Data Warehouse Developer
Calgary Homeless Foundation
Calgary, AB
- Full-time
…accuracy of all organizational information assets and associated systems. The Senior Data Warehouse Developer will design, maintain the warehouse including cloud based automation,…
Added 16 mins ago
M
Senior Project Enablement Lead
McKesson
Mississauga, ON
- Full-time
The Senior Project Enablement Lead supports high-impact transformation work across HR Services, Workforce Experience, product and service teams. You will bring structure to cross-functional…
Added 16 mins ago
Product Owner - Netsuite
Asana
Vancouver, BC
Work closely with cross-functional teams, including finance, operations, and Enterprise Technology, to ensure seamless integration with other business systems and processes.
Added 16 mins ago
NP
SCADA Engineer
Northland Power Inc.
Toronto, ON
- Full-time
…commissioning activities for SCADA/HMI, historian, and telemetry systems in order to gain operational knowledge of the facility in order to ensure a smooth transition to operations.…
Added 16 mins ago
K
Senior Consultant, Procurement Transformation
KPMG
Montreal, QC
- Full-time
Facilitate or support process design workshops with sales, operations, finance, technology, and supply chain teams.
Added 16 mins ago
UO
Experienced Structural Analysis Engineer
University of Alaska Fairbanks Petroleum Engineering
Engineer, BC
- Full-time
…a wide range of engineering tasks related to the analysis, design, and evaluation of structural components and systems, ensuring compliance with NR program and safety standards. This role…
Added 16 mins ago
AC
Business Analyst
Access Communications Cooperative Limited
Regina, SK
- Full-time
…identifies opportunities to improve business processes, streamline operations, enhance productivity, and strengthen organizational effectiveness. On behalf of the CFO, the Business Analyst…
Added 16 mins ago
UV
Plant Layout Engineer/ Specialist
UP Vertical Farms
BC · British Columbia, Canada
- Full-time
We are seeking a dynamic and detail-oriented Plant Layout Engineer/Specialist to optimize the design and arrangement of UP Vertical Farms food manufacturing facility. In this role, you will…
Added 16 mins ago
AS
Director of Information Technology
Athletica Sport Systems Inc.
Kitchener, ON
- $120,000 to $150,000 CAD / year
- Full-time
Athletica Sport Systems Inc. is a global leader in the design, manufacturing, and installation of dasher board and arena systems, and the Preferred Rink Equipment Supplier of the NHL® and…
Added 16 mins ago
MP
Guidewire Development Manager
Michael Page
Markham, ON
- $130,000 to $150,000 CAD / year
- Full-time
…and maintenance of Guidewire solutions to support business operations. You will lead a team of developers, ensuring the successful delivery of projects and providing technical guidance to…
Added 16 mins ago
FE
Senior System Specialist (Cloud)
Future Electronics
Kirkland, QC
- Full-time
The Senior Cloud Infrastructure Specialist is responsible for the design, implementation, and evolution of Future’s enterprise cloud ecosystem, with a primary focus on Microsoft Azure and…
Added 31 mins ago
C
Manufacturing Automation Manager/Team Leader
Ciena
Ottawa, ON · Quebec, QC
- $146,600 to $234,200 CAD / year
- Full-time
Expérience de soutien aux opérations manufacturières en Asie, incluant une collaboration directe avec des fabricants sous contrat
Added 31 mins ago
M
Senior Manager, Commercial Management – Ontario Line
Metrolinx
Canada
- Full-time
…guideway Stations (EGS) Ontario Line subway project. You will lead and provide oversight of commercial governance and decision-making including coordination across the corporation, provide…
Added 31 mins ago
FG
Laline - Part Time Shift Lead - Vaughan Mills
Fox Group Canada Inc.
Vaughan, ON
- Part-time
The Part-Time Team Lead plays a key role in driving sales, delivering exceptional customer experiences, and supporting store leadership in daily operations. This role is hands-on and…
Added 32 mins ago
HP
Lead Mechanical Engineer
HOCS Projects
Calgary, AB
- Full-time
…industry. We deliver dependable, innovative and responsible design solutions, with constructability and operability considered from project start through fabrication, construction and…
Added 46 mins ago
Lead Track Engineer and Team Leader
GHD Group Pty Ltd
Vancouver, BC
We’re looking for a Senior Track Designer – Team Leader to join our growing Canadian Operations. This position will be based in our Vancouver, Edmonton, or Calgary office. This role…
Added 46 mins ago
Test and Design Specialist
National Research Council Canada
Montreal, QC
We are looking for an intermediate-career Test and Design Specialist to support advanced research and development and join the Remotely Piloted Aircraft Systems (RPAS) and RPAS Traffic…
Added 46 mins ago
P
Director, Global Services Operations & Excellence
Prosci
Remote, Canada
- Full-time
- Remote
In this role, you will build and lead Prosci's new Global Services Operations & Excellence team: the operational engine behind our training and advisory delivery worldwide and the owner of…
Added 46 mins ago
08 - Operations Engineering Specialist
Celestica International LP
Toronto, ON
Knowledge of design engineering (e.g., analog circuit design, digital circuit design, digital integrated circuit design, etc.) for systems and printed circuit boards.
Added 46 mins ago
MS
Senior Plant Process Engineer
ML6 Search + Talent Advisory
Saskatoon, SK
- Full-time
…Process Engineer to help improve safe, reliable and efficient operations at one of its manufacturing…
Added 46 mins ago
Sr. Specialist - Embedded Software Developer
L3Harris Technologies
ON · Waterdown, ON
Design, develop and maintain Yocto/OpenEmbedded layers, recipes, images and root filesystems for complex electro-optical surveillance systems, including custom BSP and distribution…

Invest Ottawa

Engineer, Design and Fabrication

Ottawa, ON, K1Y 2C5, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Experience: Minimum 3 to 5 years of practical fabrication experience spanning more than one discipline among machining, electronics, embedded systems, and additive manufacturing
Posting language: English
Posted: Nov 3, 2026

Original job description

ENGINEER, DESIGN AND FABRICATION

INVEST OTTAWA – AREA X.O

Reporting to the Engineering Manager, Programs at Area X.O, the Engineer, Design and Fabrication is responsible for establishing and operating the Area X.O design and fabrication lab and serves as its primary technical resource. The lab spans machining and metalwork, electronics and simple printed circuit board fabrication and assembly, embedded systems, and additive manufacturing. The role requires direct operation of shop and fabrication equipment, not specification and oversight alone. Its primary purpose is to enable rapid prototyping and accelerated development for the client companies, startups, and SMEs engaged at Area X.O, converting concepts, requirements, and failed or incomplete hardware into physical articles that can be tested and iterated within compressed development timelines. The Engineer, Design and Fabrication is also responsible for the safe operation of the lab, including equipment selection and commissioning, operating procedures, user training and authorization, and ongoing safety management.

Work Model:

In person role at our Area X.O site located in Nepean

Corporate Pay Band D: $76,000 - $114,000

Hiring Salary Range: $76,000 - $104,500 (Segment 1 - Segment 2)

Reason for Opening:

This is an anticipated role. The position is contingent on confirmation of program funding, and posting does not guarantee that the role will be filled. Applicants will be notified of any change in status.

WHAT YOU WILL BE DOING

Client Collaboration & Communication

Work directly with client companies, engineers, and researchers to establish build objectives and translate loosely defined requirements into a manufacturable design and a realistic build plan
Advise on design for manufacturability, material and process selection, tolerances, cost, and lead time, and explain trade-offs clearly to audiences without a fabrication background
Collaborate with integration, field support, and test and evaluation engineers on parts, fixtures, enclosures, mounts, and test hardware
Support tours, demonstrations, and client-facing activities involving the lab

Prototyping & Fabrication

Produce prototype parts, assemblies, and small production runs across the full range of lab capability
Machine and fabricate metal parts: operate manual and CNC milling and turning equipment, and perform sheet metal work, drilling, cutting, joining, finishing, and assembly to drawing and to tolerance
Design, fabricate, assemble, and rework circuit boards, including through-hole and surface-mount components, wiring harnesses, and cable assemblies, and bring up, test, and debug electronic hardware
Develop embedded systems: select microcontrollers and modules, write and flash firmware, interface sensors and actuators, and debug hardware and software together at the bench
Prepare, print, post-process, and iterate additive manufacturing parts across available processes and materials, and choose between additive, subtractive, and off-the-shelf solutions
Produce and modify CAD models, drawings, and CAM programs, apply design for manufacturability and assembly, and reverse-engineer or repair existing hardware where no documentation exists
Diagnose and resolve machine, tooling, process, material, and quality problems
Develop workable solutions under schedule pressure where no established approach exists, without compromising safety or the validity of the result

Lab Setup, Safety & Operations

Set up and commission the lab, including layout, workflow, equipment specification, procurement support, installation, calibration, and acceptance
Own lab safety management: hazard assessment, written safe operating procedures, machine guarding, pre-start health and safety reviews, lockout/tagout, ventilation and fume extraction, ESD control, personal protective equipment, and chemical and material handling and disposal
Ensure compliance with applicable occupational health and safety legislation and organizational policy
Establish and administer machine-specific training and authorization for all users, and maintain a current register of user qualifications
Maintain preventive maintenance schedules, tooling, consumables, spares, and material inventory
Administer the job intake queue and prioritize competing work across concurrent client projects and program deadlines
Support capital and operating budget planning for the lab

Leadership & Standards

Serve as the technical authority for fabrication at Area X.O, and promote an iterative, prototype-driven approach across the team and client base
Establish and uphold standards for workmanship, documentation, and shop discipline
Train, qualify, and supervise staff and, where appropriate, client personnel in equipment use, with the authority to suspend unsafe work
Identify opportunities to expand lab capability through new equipment, processes, materials, or techniques, and develop the supporting business case
Pursue continuous improvement in turnaround time, repeatability, and cost of prototyping work

Relationships & Partners

Serve as the primary point of contact for client companies using the lab, and build relationships that support sustained and repeat engagement
Advise clients on the capabilities available through the lab and the wider Area X.O site, and refer them to other capabilities and staff where appropriate
Maintain relationships with suppliers, machine shops, board houses, and specialist vendors for work beyond in-house capability, and manage outsourced activities
Protect client intellectual property and maintain confidentiality when working on client designs

Documentation & Reporting

Maintain design files, drawings, CAM programs, firmware, bills of material, and build records under version control to ensure work is reproducible
Document processes, settings, and lessons learned to retain capability at the organizational level
Track job intake, effort, materials, and turnaround time, and report on lab utilization and client activity in support of program reporting
Maintain safety, training, inspection, and maintenance records, and record test and validation results for parts and assemblies produced in the lab

WHAT YOU HAVE ACCOMPLISHED/GAINED THROUGHOUT YOUR CAREER

Post-secondary degree or diploma in mechanical, mechatronics, manufacturing, electrical, or electronics engineering or engineering technology, or a relevant skilled trade qualification such as machinist or electronics technologist, or an equivalent combination of education and relevant hands-on experience
Must be a Canadian citizen and capable of attaining and maintaining Secret-level security clearance
Minimum 3 to 5 years of practical fabrication experience spanning more than one discipline among machining, electronics, embedded systems, and additive manufacturing
Demonstrated ability to personally operate shop and fabrication equipment to a professional standard
Demonstrated CAD and, where applicable, CAM experience
Breadth across fabrication disciplines, with the ability to move between machining, electronics assembly, embedded development, and additive manufacturing within a single work period, and depth in at least one
Practical machining ability, including workholding, tooling, feeds and speeds, measurement and inspection, and working to tolerance
Electronics fabrication ability, including schematic capture and simple PCB layout, through-hole and surface-mount assembly and rework, harnessing, and use of oscilloscopes, meters, and power supplies for bring-up and debug
Embedded development ability in C/C++ or MicroPython on common microcontroller platforms, including interfacing over I2C, SPI, UART, CAN, and USB
Additive manufacturing ability across FDM and resin processes, including material selection, print preparation, failure diagnosis, and post-processing
Proficiency in a mainstream CAD package such as SolidWorks, Fusion 360, or Onshape
Strong design for manufacturability judgment, including selecting the most expedient process adequate to the requirement
Resourceful problem solving, with demonstrated ability to produce novel hardware from an incomplete specification
Thorough understanding of shop safety, machine guarding, hazardous materials, and applicable occupational health and safety requirements, with the willingness to enforce them
Strong organizational ability and capacity to manage competing jobs against deadlines
Clear communication with clients of varying technical backgrounds
Familiarity with Git or equivalent version control for design and firmware files

ASSETS

Experience setting up, running, or managing a shop, makerspace, prototyping lab, or similar facility, including safety responsibility
Experience supporting external clients or working in a prototyping, R&D, or product development environment
Applicable trade certification, machine-specific tickets, or occupational health and safety certification
Familiarity with CAM programming

Do you have some of these skills but maybe not all? We still encourage you to apply, as we would love to review your unique application and learn more about you!

At Invest Ottawa and Bayview Yards, we know that diversity, inclusion and a sense of belonging are critical success factors for globally competitive organizations and are required to drive sustainable wealth creation and prosperity across our region. We prioritize the creation of an inclusive culture and infuse diversity into our programs, operations and governance. As an equal opportunity employer that doesn’t simply accept difference but celebrates, supports and thrives because of it, we invite all qualified candidates to apply, and especially encourage those who identify as members of underrepresented groups. IO and Bayview Yards are determined to provide a barrier-free work environment, starting with the hiring process. If you require accommodation during any phase of the evaluation process, please contact hr@investottawa.ca to request specialized accommodation. All information received in relation to accommodation will be kept confidential. At Invest Ottawa and Bayview Yards, we are focused on doing better and committed to leading by example because it’s what’s best for us, our culture and our community.

We may use an AI-enabled assistant to take notes during our recruitment process to help our team stay present and engaged during interviews. The tool does not screen, assess, or select applicants, and all hiring decisions are made by people. We welcome inquiries about AI use and/or requests for accommodations at any stage of the hiring process. Personal information (including recordings, transcripts, and summaries) is safeguarded in line with our privacy policy and applicable Ontario privacy legislation.

Apply About employer

More about this job

Responsibilities

The Engineer, Design and Fabrication will operate and manage the Area X.O design and fabrication lab to enable rapid prototyping for client companies. This role involves direct fabrication of hardware, equipment maintenance, and providing technical guidance to clients on design and manufacturability.

Requirements

Candidates must possess a post-secondary degree, diploma, or trade qualification in a relevant engineering or technical field with 3 to 5 years of practical experience. Applicants are required to be Canadian citizens capable of obtaining a Secret-level security clearance.

Skills

Machining
Electronics fabrication
Embedded systems
Additive manufacturing
CAD
CAM
Prototyping
PCB layout
Firmware development
C/C++
MicroPython
SolidWorks
Fusion 360
Onshape
Design for manufacturability
Shop safety

Visa sponsorship

Not detected in the job text

Keywords

Machining
Electronics
Embedded Systems
Additive Manufacturing
Prototyping
CAD
CAM
SolidWorks
Fusion 360
Onshape
PCB Fabrication
Firmware
C++
MicroPython
CNC Milling
Turning
Sheet Metal
Design for Manufacturability
Shop Safety
Hazard Assessment
Lockout/Tagout
Git
Version Control
R&D
Hardware Debugging
Oscilloscopes
Wiring Harnesses
Mechatronics
Manufacturing Engineering
Electronics Technology

Report this job