Find work in Canada.

578,899 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 10 mins ago
Maintenance Coordinator YYZ
AirSprint
Mississauga, ON
…Service, People, and Community are ingrained throughout our operations and culture. The Maintenance Coordinator plays a key operational role in maintaining the airworthiness, reliability,…
Added 27 mins ago
Senior Water Control Systems Planning Engineer
Department of Transportation and Infrastructure
Winnipeg, MB
…technical guidance on provincial water control infrastructure operations. The branch also leads hydrologic and hydraulic modelling, floodplain mapping, ice-jam mitigation and water…
Added 39 mins ago
CC
Design Engineer, Electrical
Cameco Corporation
Port Hope, ON
- Full-time
…You will also provide design work and technical support to operations, maintenance and the site projects team. You are considered the design authority for the site for electrical and…
Added 39 mins ago
B
Power Engineer - 5th Class
BGIS
AB · Edmonton, AB
- Full-time
The Power Engineer – 5 th Class is a mid entry level position, responsible for assisting other technicians, performing maintenance and repair, routine services on non-technical facility…
Added 39 mins ago
CC
Senior Salesforce Engineer
Canadian Cancer Society
Vancouver, BC
- Full-time
We are seeking a hands-on Salesforce Platform and AI Engineer to design, build, and scale secure, data-driven solutions that advance CCS’s mission. This role combines Salesforce…
Added 39 mins ago
TU
Assistant Professor (tenure-track)
The University of British Columbia
Vancouver, BC
- Full-time
…engineering. They will have demonstrated expertise in mining operations, underground mining systems, and/or mining equipment and infrastructure, evidenced by research publications and/or…
Added 39 mins ago
GF
Structural Analysis Engineer
General Fusion
Richmond, BC
- $95,000 to $115,000 CAD / year
- Full-time
The Structural Mechanical Engineer / Stress Analyst will be responsible for the structural integrity and dynamic structural performance of large-scale machine systems, with a primary focus…
Added 54 mins ago
V
Staff Information Security Engineer - Threat Detection & Response
Visier
Remote, Canada
- Full-time
- Remote
AI-Accelerated Operations: Securely integrate and pioneer the use of Generative AI tools to accelerate detection development, alert triage, telemetry enrichment, and automated responses.
Added 1 hour ago
B
Project Engineer – Major Projects | Canada & USA
Barnard
NL · Newfoundland and Labrador, Canada
- Full-time
…As part of the engineering team for the project, the Project Engineer will participate in team meetings, work collaboratively to achieve the strategic objectives of the project, and assist…
Added 1 hour ago
PH
Founding Engineer
Prometheus Health Systems
Remote, Canada
- $150,000 to $190,000 CAD / year
- Full-time
- Remote
As our first engineer, you'll work directly with the founder, a practising physician who built the platform, and with our clinical collaborators. You'll take ownership of a working system…
Added 1 hour ago
B
Power Engineer - 5th Class
BGIS
AB · Edmonton, AB
- Full-time
The Power Engineer – 5 th Class is a mid entry level position, responsible for assisting other technicians, performing maintenance and repair, routine services on non-technical facility…
Added 1 hour ago
AC
Engineer, Project
AVI-SPL Canada
Montreal, QC
- Full-time
As a Project Engineer, you will oversee the technical delivery of AV Integration projects. You will review new projects, finalizing documentation such as the bill of materials, drawings,…
Added 1 hour ago
G
Service Sales Engineer
GRUNDFOS
Oakville, ON
- Full-time
As our new Service Sales Engineer in Oakville, ON, you'll be providing technical and commercial aftermarket support to customers - preparing quotations, coordinating service projects, and…
Added 1 hour ago
Engineer, Test Equipment
Redlen Technologies Inc.
Saanichton, BC
Redlen is seeking a hands-on Engineer, Test Equipment to support the testing and validation of advanced photon-counting X-ray detector products in a high-volume manufacturing environment.…
Added 1 hour ago
SR
Engineering Co
Saskatchewan Research Council (SRC)
Saskatoon, SK
- Volunteer
SRC’s Rare Earth Element Division is seeking an Engineering Co-op Student to help support the operations for SRC’s Rare Earth Processing Facility. This position is a 16-month term, starting…
Added 1 hour ago
P
Senior Software Engineer - Java/React
PointClickCare
Mississauga, ON
- Full-time
Build robust platform services supporting clinical operations
Added 1 hour ago
P
Principal Software Engineer
PointClickCare
Mississauga, ON
- Full-time
Build robust platform services supporting clinical operations
Added 1 hour ago
C
Train Conductor - Relocation
CN
Calgary, AB
- Full-time
Ensure compliance with all train orders, signals, railroad rules and regulations related to safety and operations
Added 1 hour ago
IG
Dayforce Application Engineer
Insight Global
Canada
- Contract
Insight Global is seeking a Dayforce Application Engineer to join a large retail client. This individual will join the People Enablement Technology team and support the ongoing health and…
Added 1 hour ago
N
Sr Specialist, Maintenance & Reliability
Nutrien
Calgary, AB
- Full-time
Develop and lead cross-functional reliability programs and initiatives involving Operations, Maintenance, Engineering, Supply Chain, Digital, and Information Technology teams to improve…
Added 1 hour ago
HT
PD Software for Service
Husky Technologies
Bolton, ON
- Full-time
The Service team is currently seeking a Software engineer/designer to specialize in resolving service issues with a focus on Injection Molding Machine controls, including servo drive and…
Added 1 hour ago
GO
Senior Water Control Systems Planning Engineer
Government of Manitoba
Winnipeg, MB
- Full-time
…technical guidance on provincial water control infrastructure operations. The branch also leads hydrologic and hydraulic modelling, floodplain mapping, ice-jam mitigation and water…
Added 1 hour ago
B&
Civil Engineer - Water
Black & Veatch
Markham, ON
- $115,280 to $192,140 CAD / year
- Full-time
As part of BV Operations, your skills will be aligned to projects that support our 3 market sectors- Governments & Environment, Energy & Process Industries, and Connectivity & Commercial.…
Added 1 hour ago
P
Principal Software Engineer
PointClickCare
Mississauga, ON
- $142,700 to $178,400 CAD / year
- Full-time
Build robust platform services supporting clinical operations
Added 1 hour ago
P
Senior Software Engineer - Java/React
PointClickCare
Mississauga, ON
- $130,100 to $162,600 CAD / year
- Full-time
Build robust platform services supporting clinical operations

Invest Ottawa

Engineer, Design and Fabrication

Ottawa, ON, K1Y 2C5, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Experience: Minimum 3 to 5 years of practical fabrication experience spanning more than one discipline among machining, electronics, embedded systems, and additive manufacturing
Posting language: English
Posted: Nov 3, 2026

Original job description

ENGINEER, DESIGN AND FABRICATION

INVEST OTTAWA – AREA X.O

Reporting to the Engineering Manager, Programs at Area X.O, the Engineer, Design and Fabrication is responsible for establishing and operating the Area X.O design and fabrication lab and serves as its primary technical resource. The lab spans machining and metalwork, electronics and simple printed circuit board fabrication and assembly, embedded systems, and additive manufacturing. The role requires direct operation of shop and fabrication equipment, not specification and oversight alone. Its primary purpose is to enable rapid prototyping and accelerated development for the client companies, startups, and SMEs engaged at Area X.O, converting concepts, requirements, and failed or incomplete hardware into physical articles that can be tested and iterated within compressed development timelines. The Engineer, Design and Fabrication is also responsible for the safe operation of the lab, including equipment selection and commissioning, operating procedures, user training and authorization, and ongoing safety management.

Work Model:

In person role at our Area X.O site located in Nepean

Corporate Pay Band D: $76,000 - $114,000

Hiring Salary Range: $76,000 - $104,500 (Segment 1 - Segment 2)

Reason for Opening:

This is an anticipated role. The position is contingent on confirmation of program funding, and posting does not guarantee that the role will be filled. Applicants will be notified of any change in status.

WHAT YOU WILL BE DOING

Client Collaboration & Communication

Work directly with client companies, engineers, and researchers to establish build objectives and translate loosely defined requirements into a manufacturable design and a realistic build plan
Advise on design for manufacturability, material and process selection, tolerances, cost, and lead time, and explain trade-offs clearly to audiences without a fabrication background
Collaborate with integration, field support, and test and evaluation engineers on parts, fixtures, enclosures, mounts, and test hardware
Support tours, demonstrations, and client-facing activities involving the lab

Prototyping & Fabrication

Produce prototype parts, assemblies, and small production runs across the full range of lab capability
Machine and fabricate metal parts: operate manual and CNC milling and turning equipment, and perform sheet metal work, drilling, cutting, joining, finishing, and assembly to drawing and to tolerance
Design, fabricate, assemble, and rework circuit boards, including through-hole and surface-mount components, wiring harnesses, and cable assemblies, and bring up, test, and debug electronic hardware
Develop embedded systems: select microcontrollers and modules, write and flash firmware, interface sensors and actuators, and debug hardware and software together at the bench
Prepare, print, post-process, and iterate additive manufacturing parts across available processes and materials, and choose between additive, subtractive, and off-the-shelf solutions
Produce and modify CAD models, drawings, and CAM programs, apply design for manufacturability and assembly, and reverse-engineer or repair existing hardware where no documentation exists
Diagnose and resolve machine, tooling, process, material, and quality problems
Develop workable solutions under schedule pressure where no established approach exists, without compromising safety or the validity of the result

Lab Setup, Safety & Operations

Set up and commission the lab, including layout, workflow, equipment specification, procurement support, installation, calibration, and acceptance
Own lab safety management: hazard assessment, written safe operating procedures, machine guarding, pre-start health and safety reviews, lockout/tagout, ventilation and fume extraction, ESD control, personal protective equipment, and chemical and material handling and disposal
Ensure compliance with applicable occupational health and safety legislation and organizational policy
Establish and administer machine-specific training and authorization for all users, and maintain a current register of user qualifications
Maintain preventive maintenance schedules, tooling, consumables, spares, and material inventory
Administer the job intake queue and prioritize competing work across concurrent client projects and program deadlines
Support capital and operating budget planning for the lab

Leadership & Standards

Serve as the technical authority for fabrication at Area X.O, and promote an iterative, prototype-driven approach across the team and client base
Establish and uphold standards for workmanship, documentation, and shop discipline
Train, qualify, and supervise staff and, where appropriate, client personnel in equipment use, with the authority to suspend unsafe work
Identify opportunities to expand lab capability through new equipment, processes, materials, or techniques, and develop the supporting business case
Pursue continuous improvement in turnaround time, repeatability, and cost of prototyping work

Relationships & Partners

Serve as the primary point of contact for client companies using the lab, and build relationships that support sustained and repeat engagement
Advise clients on the capabilities available through the lab and the wider Area X.O site, and refer them to other capabilities and staff where appropriate
Maintain relationships with suppliers, machine shops, board houses, and specialist vendors for work beyond in-house capability, and manage outsourced activities
Protect client intellectual property and maintain confidentiality when working on client designs

Documentation & Reporting

Maintain design files, drawings, CAM programs, firmware, bills of material, and build records under version control to ensure work is reproducible
Document processes, settings, and lessons learned to retain capability at the organizational level
Track job intake, effort, materials, and turnaround time, and report on lab utilization and client activity in support of program reporting
Maintain safety, training, inspection, and maintenance records, and record test and validation results for parts and assemblies produced in the lab

WHAT YOU HAVE ACCOMPLISHED/GAINED THROUGHOUT YOUR CAREER

Post-secondary degree or diploma in mechanical, mechatronics, manufacturing, electrical, or electronics engineering or engineering technology, or a relevant skilled trade qualification such as machinist or electronics technologist, or an equivalent combination of education and relevant hands-on experience
Must be a Canadian citizen and capable of attaining and maintaining Secret-level security clearance
Minimum 3 to 5 years of practical fabrication experience spanning more than one discipline among machining, electronics, embedded systems, and additive manufacturing
Demonstrated ability to personally operate shop and fabrication equipment to a professional standard
Demonstrated CAD and, where applicable, CAM experience
Breadth across fabrication disciplines, with the ability to move between machining, electronics assembly, embedded development, and additive manufacturing within a single work period, and depth in at least one
Practical machining ability, including workholding, tooling, feeds and speeds, measurement and inspection, and working to tolerance
Electronics fabrication ability, including schematic capture and simple PCB layout, through-hole and surface-mount assembly and rework, harnessing, and use of oscilloscopes, meters, and power supplies for bring-up and debug
Embedded development ability in C/C++ or MicroPython on common microcontroller platforms, including interfacing over I2C, SPI, UART, CAN, and USB
Additive manufacturing ability across FDM and resin processes, including material selection, print preparation, failure diagnosis, and post-processing
Proficiency in a mainstream CAD package such as SolidWorks, Fusion 360, or Onshape
Strong design for manufacturability judgment, including selecting the most expedient process adequate to the requirement
Resourceful problem solving, with demonstrated ability to produce novel hardware from an incomplete specification
Thorough understanding of shop safety, machine guarding, hazardous materials, and applicable occupational health and safety requirements, with the willingness to enforce them
Strong organizational ability and capacity to manage competing jobs against deadlines
Clear communication with clients of varying technical backgrounds
Familiarity with Git or equivalent version control for design and firmware files

ASSETS

Experience setting up, running, or managing a shop, makerspace, prototyping lab, or similar facility, including safety responsibility
Experience supporting external clients or working in a prototyping, R&D, or product development environment
Applicable trade certification, machine-specific tickets, or occupational health and safety certification
Familiarity with CAM programming

Do you have some of these skills but maybe not all? We still encourage you to apply, as we would love to review your unique application and learn more about you!

At Invest Ottawa and Bayview Yards, we know that diversity, inclusion and a sense of belonging are critical success factors for globally competitive organizations and are required to drive sustainable wealth creation and prosperity across our region. We prioritize the creation of an inclusive culture and infuse diversity into our programs, operations and governance. As an equal opportunity employer that doesn’t simply accept difference but celebrates, supports and thrives because of it, we invite all qualified candidates to apply, and especially encourage those who identify as members of underrepresented groups. IO and Bayview Yards are determined to provide a barrier-free work environment, starting with the hiring process. If you require accommodation during any phase of the evaluation process, please contact hr@investottawa.ca to request specialized accommodation. All information received in relation to accommodation will be kept confidential. At Invest Ottawa and Bayview Yards, we are focused on doing better and committed to leading by example because it’s what’s best for us, our culture and our community.

We may use an AI-enabled assistant to take notes during our recruitment process to help our team stay present and engaged during interviews. The tool does not screen, assess, or select applicants, and all hiring decisions are made by people. We welcome inquiries about AI use and/or requests for accommodations at any stage of the hiring process. Personal information (including recordings, transcripts, and summaries) is safeguarded in line with our privacy policy and applicable Ontario privacy legislation.

Apply About employer

More about this job

Responsibilities

The Engineer, Design and Fabrication will operate and manage the Area X.O design and fabrication lab to enable rapid prototyping for client companies. This role involves direct fabrication of hardware, equipment maintenance, and providing technical guidance to clients on design and manufacturability.

Requirements

Candidates must possess a post-secondary degree, diploma, or trade qualification in a relevant engineering or technical field with 3 to 5 years of practical experience. Applicants are required to be Canadian citizens capable of obtaining a Secret-level security clearance.

Skills

Machining
Electronics fabrication
Embedded systems
Additive manufacturing
CAD
CAM
Prototyping
PCB layout
Firmware development
C/C++
MicroPython
SolidWorks
Fusion 360
Onshape
Design for manufacturability
Shop safety

Visa sponsorship

Not detected in the job text

Keywords

Machining
Electronics
Embedded Systems
Additive Manufacturing
Prototyping
CAD
CAM
SolidWorks
Fusion 360
Onshape
PCB Fabrication
Firmware
C++
MicroPython
CNC Milling
Turning
Sheet Metal
Design for Manufacturability
Shop Safety
Hazard Assessment
Lockout/Tagout
Git
Version Control
R&D
Hardware Debugging
Oscilloscopes
Wiring Harnesses
Mechatronics
Manufacturing Engineering
Electronics Technology

Report this job