Jobs in Canada

25+ jobs

Group jobs by employerEmail me new jobs Save this search

Added 58 mins ago
AS
Sheet Metal Worker
ATCO Structures
Grimsby, ON
- Full-time
ATCO Structures is seeking a Sheet Metal Worker in Grimsby, Ontario, to support the trim finishing by shearing and bending custom light gauge steel for the construction of our modular units.
Added 58 mins ago
KM
Transducer Manufacturing Associate - Contract
Kongsberg Maritime
Port Coquitlam, BC
- Full-time
As your skills develop, you may also support surface and subsea assembly, motor drive assembly and testing, optical sensor testing, oil filling and degassing of pressure-compensated…
Added 1 hour ago
A
Industrial Engineering Coordinator
Actalent
Mirabel, QC
- $45 to $60 CAD / hour
- Contract
Define workforce requirements needed to support the production ramp-up and rate plans of manufacturing units (Operational Planning).
Added 1 hour ago
MM
Manufacturing Engineer
Modine Manufacturing Company
Calgary, AB
- Full-time
Identify opportunities and implement changes to improve products and reduce costs using knowledge of fabrication processes, tooling, production equipment, conferring with equipment vendors,…
Added 2 hours ago
R
Autodesk Inventor Support Specialist - Canada
ReVisionz
Remote, Canada
- Contract
- Remote
Support detail and fabrication model authoring standards, weldment and sheet metal configuration, and isometric and general arrangement drawing templates and title blocks
Added 4 hours ago
S
DCN Manufacturing Engineer
SLB
Canada
- Full-time
…operations by driving process optimization, troubleshooting production challenges, and improving product quality and manufacturing efficiency. Working closely with Production, Quality,…
Added 6 hours ago
JC
Mechanical Drafter, Sealing & Design
Johnson Controls
AB · SA - Edmonton Orion
- Full-time
Develop production-ready drawings with accurate dimensions, tolerances, sections, detail views, notes, material callouts, and assembly requirements.
Added 6 hours ago
OM
Hardware Engineering - Sr. Mechanical Engineer - P4
OSI Maritime Systems
Burnaby, BC
- Full-time
Provides design information and guidance to support personnel and, occasionally to suppliers, in preparation of detailed design, design testing and prototype fabrication.
Added 7 hours ago
GV
Ingénieur(e) Lead concepteur(trice) mécanique - Lead Mechanical design Engineer
GE Vernova
Longueuil, QC
- Full-time
· Support manufacturing, assembly, and testing activities in the workshop.
Added 7 hours ago
A
Sheet Metal Worker
ATCO
Grimsby, ON
- Full-time
ATCO Structures is seeking a Sheet Metal Worker in Grimsby, Ontario, to support the trim finishing by shearing and bending custom light gauge steel for the construction of our modular units.
Added 7 hours ago
CE
Journeyperson Pipefitter
Canadian Energy Insight Inc.
Bonnyville, AB
- Full-time
Journeyperson Pipefitters possess the full range of knowledge required to lay out, assemble, install, and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment…
Added 7 hours ago
A
Ingenieur Qualite / Quality Engineer
Actalent
Montreal, QC
- $40 to $55 CAD / hour
- Contract
Le poste implique de travailler à la fois sur site et chez le fournisseur (2 jours par semaine), principalement à Laval
Added 7 hours ago
A
Methods Engineer
Actalent
Fort Erie, ON
- $50 to $60 CAD / hour
- Full-time
The Methods Engineer analyzes aerospace engineering documentation and develops detailed, practical manufacturing plans that translate technical requirements into repeatable production…
Added 7 hours ago
A
Agent Method // Methods Agent
Actalent
Mirabel, QC
- $35 to $60 CAD / hour
- Contract
The Methods Agent plays a critical role in planning, optimizing, and supporting aerospace production activities. This person interprets and validates technical documentation, defines…
Added 7 hours ago
TG
BIM Inventor Specialist - Toro - R&D
Toro Group of Companies
Concord, ON
- Full-time
The Inventor Specialist will be responsible for creating and maintaining 3D models, illogic, Content Center data of various products or systems using Autodesk Inventor software. This role…
Added 7 hours ago
WG
Fabricator (Calgary, AB)
Wolseley Group
Calgary, AB
- Full-time
At Wolseley Canada, our leading-edge is the knowledge and insight found in every corner of our organization. Here, you’ll build strong relationships and support critical industries that…
Added 8 hours ago
WC
Fabricator (Calgary, AB)
Wolseley Canada Inc.
Fairview, AB
- Full-time
At Wolseley Canada, our leading-edge is the knowledge and insight found in every corner of our organization. Here, you’ll build strong relationships and support critical industries that…
Added 9 hours ago
SG
Journeyperson Pipefitter
Strike Group
Conklin, AB
- Full-time
Must possess a valid Journeyperson certificate from the appropriate provincial or federal authority · Must have or be willing to obtain valid H2S Alive and CSTS 2020 or PST tickets
Added 9 hours ago
KP
KPW Process Engineer
Komline Pure Water
Surrey, BC
- Full-time
The Process Engineer will develop treatment approaches, perform engineering calculations, select equipment, and support projects from proposal development through fabrication,…
Added 9 hours ago
Hardware Engineering - Sr. Mechanical Engineer - P4
OSI Maritime Systems
Burnaby, BC
Provides design information and guidance to support personnel and, occasionally to suppliers, in preparation of detailed design, design testing and prototype fabrication.
Added 9 hours ago
N
Technical Solutions Lead
Norcada
AB · Edmonton, AB
- Full-time
Norcada makes cutting-edge scientific products and instruments, and we need people with a scientific or technical background and a passion for the field to work directly with our customers.…
Added 9 hours ago
N
Technical Solutions Lead
Norcada
AB · Edmonton, AB
- Full-time
Norcada makes cutting-edge scientific products and instruments, and we need people with a scientific or technical background and a passion for the field to work directly with our customers.…
Added 10 hours ago
AM
Senior Electrical Designer
AVL Manufacturing Inc.
Hamilton, ON
- $90,000 to $105,000 CAD / year
- Full-time
Our team is the foundation of our success. Comprised of dedicated engineers, skilled fabricators, and experienced project managers, we bring a collaborative, hands-on approach to every…
Added 11 hours ago
HS
Rigger Technician
Hercules SLR
Winnipeg, MB
- Full-time
At least 2 years of hands-on rigging experience, including sling and rigging assembly fabrication.
Added 12 hours ago
IS
Production Norms Engineering Student/Co-op- Winter 2027
Irving Shipbuilding
Halifax, NS
- Full-time
Production Engineering plays a key role in ship construction by turning design intent into practical, efficient build plans. The team focuses on creating production‑ready designs,…

Johnson Controls

Mechanical Drafter, Sealing & Design

AB, Canada
SA - Edmonton Orion, Canada

Full-time

Apply on jci.wd5.myworkdayjobs.com About employer

Applications open in a new tab.

Job details

Job type: Full-time
Posting language: English
Posted: Nov 9, 2026

Original job description

Silent-Aire designs and manufactures custom equipment for data center customers, including large-scale air handling units and modular data center solutions. We are focused on innovation, quality, and delivering tailored equipment that performs reliably in demanding environments.

What you will do

The Mechanical Drafter – Sealing & Design supports Equipment Design Engineering by creating accurate, manufacturing-ready mechanical drawings with a specialized focus on sealing systems and sealing-detail standardization. This role combines strong CAD drafting capability with practical manufacturability knowledge to help define, document, and standardize sealing solutions across multiple equipment platforms.

Key Responsibilities

Create and maintain detailed 2D manufacturing drawings and 3D models using Autodesk Inventor and PTC Creo.

Develop production-ready drawings with accurate dimensions, tolerances, sections, detail views, notes, material callouts, and assembly requirements.

Translate engineering intent into clear documentation that gives Manufacturing the information needed to build equipment consistently.

Review drawings for completeness, accuracy, manufacturability, and consistency before release.

Support drawing revisions and updates resulting from design changes, manufacturing feedback, quality issues, and continuous improvement activities.

Work with mechanical designers and engineers to define sealing requirements for caulking/sealants, foam tape, butyl tape, gaskets, and related sealing interfaces.

Clearly define sealing locations, material requirements, application methods, overlaps, transitions, joints, and critical sealing details in engineering drawings.

Develop detailed sections and views that reduce ambiguity during manufacturing and assembly.

Support the creation of standard sealing details and reusable drawing practices across product families.

Apply Design for Excellence principles to improve manufacturability, assembly, quality, cost, and repeatability.

Partner with Manufacturing Engineering, Production, Quality, and EDE teams to ensure drawing requirements are practical and executable on the shop floor.

Identify opportunities to simplify designs, reduce variation, and improve standardization across equipment platforms.

Support continuous improvement efforts focused on drawing quality, repeatability, and reduction of rework or production issues.

How You Will Do It

Own your work with accuracy, accountability, and a strong focus on safety and quality.
Stay close to the details on the shop floor and in the drawing package so sealing requirements are practical, clear, and buildable.
Use a continuous-improvement mindset to remove ambiguity, standardize details, and solve recurring design issues at the source.
Collaborate openly with engineering, manufacturing, quality, and production partners to reach solutions that work across the full build process.
Use sound drafting judgment to balance design intent, manufacturability, and repeatability.
Check your work carefully before release and incorporate feedback with discipline and consistency.

What we look for

Diploma, certificate, or equivalent technical education in Mechanical Engineering Technology, Mechanical Design, Drafting, CAD, or a related discipline.
Extensive hands-on experience with Autodesk Inventor and PTC Creo in a production or equipment-design environment.
Strong experience creating detailed mechanical fabrication and assembly drawings.
Strong understanding of mechanical assemblies, sheet metal, fabricated components, equipment structures, and manufacturing processes.
Working knowledge of GD&T, dimensional tolerancing, drawing standards, BOM structures, and engineering change/revision practices.
Demonstrated understanding of DFX, Design for Manufacturing, and Design for Assembly as they apply to equipment design.
Experience working directly with engineering, manufacturing, and production teams.
Strong attention to detail with the ability to identify drawing inconsistencies, missing information, conflicting requirements, and manufacturability concerns.

Preferred

Experience developing or detailing sealing systems for industrial equipment or fabricated assemblies.
Practical knowledge of caulking/sealants, foam tapes, butyl tapes, gaskets, and related sealing materials.
Experience standardizing drawings and design details across multiple products or equipment platforms.
Experience supporting high-volume, configurable, or engineered-to-order equipment.
Familiarity with PLM/PDM environments and controlled engineering release processes.

Why Join Us

You will join a team where your drafting and engineering support directly influence product performance, manufacturability, and customer success. This role offers the opportunity to contribute to innovative equipment designs that support reliability, quality, and sustainability in the data center space.

If you are ready to help standardize and strengthen critical design details, we encourage you to apply.

HIRING HOURLY RANGE: $34.13 -$56.41 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your

background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the Johnson Controls Careers site at https://jobs.johnsoncontrols.com/about-us

Johnson Controls’ Canadian subsidiaries are committed to providing reasonable accommodation to applicants, candidates and employees with disabilities, in accordance with applicable human rights legislation, and in Ontario, in accordance with the Accessibility for Ontarians with Disabilities Act (“AODA”). When requested, accommodation will be provided throughout all stages of the recruitment and selection process. To request accommodation, please contact us. Any information you provide related to accommodation measures will be treated as confidential. A copy of Johnson Controls’ applicable AODA policies are available on our website at www.johnsoncontrols.com for your reference, and can be made available in accessible formats upon request.

Apply on jci.wd5.myworkdayjobs.com About employer

More about this job

Responsibilities

The Mechanical Drafter creates accurate, manufacturing-ready 2D drawings and 3D models with a focus on sealing systems and standardization. They collaborate with engineering and production teams to ensure designs are practical, buildable, and consistent across equipment platforms.

Requirements

Candidates must have a diploma or certificate in a relevant technical field and extensive hands-on experience with Autodesk Inventor and PTC Creo. A strong understanding of mechanical assemblies, sheet metal, and manufacturing processes is required, along with proficiency in GD&T and drawing standards.

Skills

Autodesk Inventor
PTC Creo
Mechanical drafting
Sheet metal design
GD&T
Manufacturing processes
Sealing systems
BOM structures
Design for Manufacturing
Design for Assembly
Technical documentation
CAD
Engineering change management
Quality control
Assembly drawings

Benefits

Competitive benefits package

Visa sponsorship

Not detected in the job text

Keywords

Mechanical Drafter
Autodesk Inventor
PTC Creo
Sheet Metal
GD&T
Sealing Systems
Manufacturing Engineering
CAD
BOM
Design for Manufacturing
Design for Assembly
Data Center
Air Handling Units
Engineering Documentation
Quality Assurance
Continuous Improvement
Fabrication
Assembly
Technical Drawing
Standardization
Mechanical Design
Industrial Equipment
PLM
PDM
Engineering Change

Report this job

Work requirements

Jobs in Canada