Find work in Canada.

336,262 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 10 mins ago
MR
Laboratory Maintenance & Reliability Technician
Mara Renewables Corp
Dartmouth, NS
- Full-time
At Mara Renewables Corporation (Mara), we exist to re-engineer nature’s pantry, reimagine human nutrition, and revitalize wellness and the environment. We use the power of science and…
Added 10 mins ago
Asset manager - Wind turbine performance / Gestionnaire d'actifs - Performances des éoliennes
ENERCON
Montreal, QC
Added 10 mins ago
B
R&D Engineer Mechanical
Broadcom
Ottawa, ON
- $76,300 to $122,000 CAD / year
- Full-time
As a Mechanical Design Engineer, you will design, develop, and deliver mechanical assemblies, including full chassis design for ultra-high-performance and power electronic products. We are…
Added 10 mins ago
B
Principal Hardware Engineer
Broadcom
Ottawa, ON
- $114,400 to $183,000 CAD / year
- Full-time
You will work collaboratively with an interdisciplinary team of Hardware, ASIC, Signal, Mechanical, Thermal, Diagnostic, Packaging, and Manufacturing engineers. In addition, Joint…
Added 10 mins ago
B
Principal Mechanical Engineer
Broadcom
Ottawa, ON
- $114,400 to $183,000 CAD / year
- Full-time
As a Principal Mechanical Engineer, you will design, develop, and deliver Mechanical assemblies, including full chassis design for Ultra High-performance and power electronic products. In…
Added 25 mins ago
R
Spécialiste Technique CFirst / CFirst Technical Specialist
RTX
Longueuil, QC
- Full-time
Added 25 mins ago
Q
Lead Engineer - Mechanical
Qualus
Vancouver, BC
- Full-time
Power Your Future with Qualus in our T&D Canada business as a Lead Engineer - Mechanical. Reporting to the Director of Engineering, this position is located in our Vancouver, BC office. If…
Added 40 mins ago
VE
Project Engineer (Water & Wastewater)
Veolia Environnement SA
Oakville, ON
- Full-time
Engineer systems in compliance with engineering principles, customer standards and specifications, contractual requirements, and local applicable codes.
Added 54 mins ago
HP
Director of Engineering
HCR Permanent Search
Cambridge, ON · Greater Kitchener-Cambridge-Waterloo Metropolitan Area
- $160,000 to $180,000 CAD / year
- Full-time
Bachelor's Degree in Mechanical Engineering or related discipline.
Added 54 mins ago
Q
Lead Engineer - Mechanical
Qualus
Vancouver, BC · Greater Vancouver Metropolitan Area
- Full-time
Power Your Future with Qualus in our T&D Canada business as a Lead Engineer - Mechanical. Reporting to the Director of Engineering, this position is located in our Vancouver, BC office. If…
Added 1 hour ago
S
Responsable de la qualité des fournisseurs / Supplier Quality Leader
Smardt
Dorval, QC
- Full-time
Certification ASQ Certified Quality Engineer (CQE) ou équivalent, de préférence.
Added 1 hour ago
TT
Intermediate – Instrumentation Engineer – Calgary Office
TWD Technologies Ltd.
Calgary, AB
- Contract
As an Instrumentation Engineer in our Calgary office, you will provide engineering design, analysis, and technical support for instrumentation and control systems across projects within the…
Added 1 hour ago
VA
Aircraft Certification Authority (ACA) - Ottawa
Voyageur Aviation
Kingston, ON
- Full-time
Voyageur Aviation Corp. is seeking a qualified Aircraft Maintenance Engineer (ACA) based in Ottawa, Ontario. This position offers a stable Monday to Friday, daytime schedule, providing an…
Added 1 hour ago
W
Associate Technical Consultant
Worley
Calgary, AB · Edmonton, AB
- Full-time
Coordinating interfaces with engineering partners, construction contractors, equipment manufacturers, system integrators and project management as well as other technical disciplines…
Added 1 hour ago
IA
Power Engineer
IMP Aerospace & Defence
Halifax, NS
- Full-time
This position is responsible for operating and maintaining various types of stationary engines and mechanical equipment, such as boilers, pumps, compressors, motors, generators, and water…
Added 1 hour ago
AW
Senior Engineer, Project Development
Agilus Work Solutions
Richmond Hill, ON
- Full-time
The Sr. Engineer, Project Development is responsible for identifying, developing, and advancing strategic business opportunities and projects that support organizational growth and…
Added 1 hour ago
R
Ingenieur(e) de projets / Project Engineer
RTX
Longueuil, QC
- Full-time
Added 1 hour ago
MP
Metallurgical Tech. 185331UO
Metal Processing Group, an Affiliate of The Heico Companies
L'Orignal, ON
- Full-time
Within guidelines, reclassifies heats/orders which do not conform to chemical, mechanical or structural properties.
Added 1 hour ago
BH
Mechanical Division Manager - Generation Engineering
BC Hydro
Burnaby, BC
- $158,900 to $200,900 CAD / year
- Full-time
The Engineering Division Manager leads and oversees Generation Stations Mechanical Engineering Division across 5 teams that together comprise approximately 50 professional, technical, and…
Added 1 hour ago
RC
Renewable Energy Engineer (Entry-Level)
Renewable Careers
Toronto, ON
- $80,000 to $110,000 CAD / year
- Full-time
A bachelor's degree in electrical, mechanical, civil or environmental engineering, or a related field
Added 1 hour ago
B
Senior Mechanical Engineer
BGIS
Markham, ON
- Full-time
The Senior Mechanical Engineer will be a member of the Professional Services team and be able to work independently on Heating, Ventilation and Air Conditioning (HVAC), plumbing, drainage,…
Added 2 hours ago
AM
Civil Engineering Designer
Aplin Martin
Oakville, ON
- Full-time
Coordinate design with consultant team including but not limited to: architect, landscape architect, mechanical engineer, electrical engineer, traffic consultant, hydrogeologist, and…
Added 2 hours ago
B
Senior Mechanical Engineer
BGIS
Markham, ON
- Full-time
The Senior Mechanical Engineer will be a member of the Professional Services team and be able to work independently on Heating, Ventilation and Air Conditioning (HVAC), plumbing, drainage,…
Added 2 hours ago
W
Senior to Principal Instrumentation & Controls Engineer
Worley
Vancouver, BC
- Full-time
The Senior or Principal Instrumentation & Controls Engineer provides technical leadership and instrumentation and control (I&C) engineering expertise across projects for Worley and its…
Added 2 hours ago
W
Instrumentation & Controls Engineer
Worley
Calgary, AB
- Full-time
The Instrumentation & Controls Engineer provides instrumentation and control (I&C) engineering services to Worley and its customers. The role supports the delivery of I&C engineering work…

Juno Engineering Canada Inc.

Intermediate Electrical Designer

Calgary, AB, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Apr 4, 2027
Experience: 5+ years of industrial E&I design and drafting experience on energy-sector projects, with demonstrated ability to independently complete assigned drawing packages.
Posting language: English
Posted: Oct 6, 2026

Original job description

Job Title: Intermediate Electrical Designer

Department, Group: Operations, Electrical

Reports To: Team Lead, Electrical

Job Overview:

Juno Engineering Canada Inc. (Juno) is an EPC consulting firm specializing in electrical, instrumentation, and controls (EIC) solutions for industrial energy facilities across Western Canada. We are currently seeking an Intermediate Electrical Designer to support the development, coordination, and quality of E&I drawing deliverables produced by our internal design and drafting team.

In this full-time role, you will work as an intermediate technologist responsible for producing and coordinating construction-ready E&I drawings in alignment with the Engineer of Record’s (EOR) design requirements. You will apply established design standards, collaborate with engineers and senior designers, and contribute to accurate, consistent, and timely project deliverables.

Key Responsibilities:

Technical Drawing Development & Coordination:

Develop a broad range of E&I drawings for assigned projects - including single-line diagrams, AC/DC schematics, wiring and interconnection diagrams, cable and tray routing plans, grounding and lighting layouts, heat-trace details, instrument loop diagrams, hookup sheets, junction-box schedules, control-panel GAs, and other circuit drawings.
Maintain drawing indexes, title-block metadata, and document-control registers; coordinate revision updates with the Senior Designer and Document Controller.
Translate redlines, mark-ups, and design calculations from discipline engineers and the EOR into clear, constructible, and code-compliant drawings.
Participate in multidisciplinary model and drawing reviews (30/60/90% and IFC), addressing comments related to drawing clarity, clashes, and constructability.
Coordinate inputs from process, mechanical, civil/structural, and automation teams into cohesive E&I drawing sets.

Design Standards & Quality Assurance:

Apply Juno’s established design standards, symbol libraries, and annotation practices across AutoCAD Electrical and 3-D raceway modelling platforms.
Perform detailed self-checks and peer reviews of drawings prior to Issued-for-Review (IFR), Issued-for-Approval (IFA), and Issued-for-Construction (IFC) submissions.
Support continuous improvement of drafting templates, automated report generation (e.g., cable schedules and loop lists), and drawing production workflows.
Prepare and incorporate as-built drawing updates during construction and project turnover.

Team Collaboration & Development:

Work collaboratively with senior designers, drafters, engineers, and co-op students to maintain accuracy and consistency across project deliverables.
Manage assigned work packages and priorities, communicate progress, and complete deliverables in accordance with project standards and schedules.
Participate in knowledge-sharing sessions on code changes (CEC Part I, ISA standards, IEC 60079) and best-practice detailing techniques.

Interface with Engineering & Construction:

Work closely with project engineers and senior designers to clarify design assumptions, cable sizing, load lists, and hazardous-area requirements.
Support construction teams by preparing field clarification sketches and incorporating approved site mark-ups.
Participate in model walk-downs, field verifications, and plant tie-in surveys to capture existing conditions accurately.

Qualifications and Requirements:

Education & Professional Registration:

Electrical or Instrumentation Engineering Technology diploma (T‑level) or equivalent journeyperson drafting qualification.
5+ years of industrial E&I design and drafting experience on energy-sector projects, with demonstrated ability to independently complete assigned drawing packages.
Registered or eligible for registration as a C.E.T. (ASET) or equivalent designation in Alberta.

Technical Skills:

Demonstrated experience producing drawings under the direction of an Engineer of Record and senior design personnel.
Working knowledge of CEC Part I, CSA C22.2 standards, ISA instrumentation symbology, and IEC 60079 or API 505 hazardous-area classification documents.
Demonstrated ability to produce and revise:
Single-line diagrams up to 5 kV and grounding diagrams
Detailed wiring and termination diagrams for MCCs, VFDs, and PLC/DCS panels
Instrument loop drawings, hookup sheets, and junction-box termination plans
3-D cable-tray models, clash review mark-ups, and bills of materials
SR and MI electrical trace-heating circuit layouts, schedules, and isometric drawings

Non-Technical Skills:

Strong attention to detail and commitment to producing accurate, high-quality work.
Clear communication skills and the ability to collaborate effectively with engineering and design team members.
Strong organizational skills for managing assigned tasks across multiple projects.
Alignment with Juno’s values: safety, indigenous inclusion, technical excellence, and environmental responsibility.

Working Environment:

Calgary‑based hybrid role (minimum 2 days/week in office).
Field/site verification trips up to 10 % (occasionally remote, fly‑in/fly‑out).
Must safely navigate industrial environments and wear required PPE.

Compensation & Benefits:

Competitive salary commensurate with intermediate design experience.
Performance bonus and company deferred profit‑sharing plan (RRSP Matching).
Comprehensive health & dental plan,
Paid professional dues, continuing‑education support, and negotiable compressed work schedule.

About Juno Engineering Canada

Juno Engineering Canada has a 40-year legacy of delivering innovative electrical and instrumentation solutions across sectors such as energy and infrastructure. As an intermediate designer, you’ll be part of a collaborative, people-focused environment where you can expand your technical expertise and contribute to the future of energy and automation.

Apply Now to join Juno as an Intermediate Electrical Designer and contribute to high-quality electrical and instrumentation projects across Canada and the United States.

Apply About employer

More about this job

Responsibilities

Develop, coordinate, review, and update construction-ready electrical and instrumentation drawings, incorporating engineering inputs, design standards, multidisciplinary comments, and field mark-ups. Manage assigned work packages and drawing records, support quality and workflow improvements, and collaborate with engineering, design, and construction teams through project delivery and turnover.

Requirements

Requires an electrical or instrumentation engineering technology diploma or equivalent journeyperson drafting qualification, at least 5 years of industrial E&I design and drafting experience, and registration or eligibility for C.E.T. registration or an equivalent Alberta designation. Candidates should have experience producing industrial electrical and instrumentation drawings and working knowledge of applicable electrical codes, instrumentation standards, and hazardous-area requirements.

Skills

Electrical and Instrumentation Design
Electrical Drafting
AutoCAD Electrical
3-D Raceway Modeling
Single-Line Diagrams
Wiring and Termination Diagrams
Cable Tray Routing and Modeling
Grounding and Lighting Layouts
Instrument Loop Drawings
Heat-Trace Circuit Layouts
CEC Part I
CSA C22.2 Standards
ISA Instrumentation Symbology
IEC 60079
Hazardous-Area Classification
Drawing Quality Assurance

Benefits

Performance Bonus
Deferred Profit-Sharing Plan
RRSP Matching
Health and Dental Plan
Paid Professional Dues
Continuing-Education Support
Negotiable Compressed Work Schedule

Visa sponsorship

Not detected in the job text

Keywords

Electrical and Instrumentation
E&I Design
Industrial Energy Facilities
AutoCAD Electrical
3-D Raceway Modeling
Single-Line Diagrams
AC/DC Schematics
Wiring Diagrams
Cable Tray Routing
Grounding
Lighting Layouts
Heat Tracing
Instrument Loop Diagrams
Junction-Box Schedules
Control-Panel General Arrangements
Cable Schedules
Loop Lists
CEC Part I
CSA C22.2
ISA Standards
IEC 60079
API 505
Hazardous-Area Classification
Engineer of Record
Issued for Construction
As-Built Drawings
Clash Reviews
Bills of Materials
C.E.T.
ASET

Report this job