Gasfitter Class A, Industrial Flare Installation
- Calgary, AB, Canada
Part-time
Applications open in a new tab.
Job details
- Job type
- Part-time
- Apply by
- Posting language
- English
- Posted
Original job description
Position: Gasfitter Class A, Industrial Flare Installation
We are seeking skilled, Gasfitter Class A for project-based work to install Industrial Flare. The ideal candidate will be mechanically minded, comfortable working at heights, and experienced with combustion equipment and fitting fuel gas piping.
What You Will Do
We are seeking skilled, Gasfitter Class A for project-based work to install Industrial Flare. The ideal candidate will be mechanically minded, comfortable working at heights, and experienced with combustion equipment and fitting fuel gas piping.
What You Will Do
- Review the pilot gas and FFG installation against the applicable Alberta Gas Code Regulation and CSA B149 requirements before commissioning.
- Obtain permitting as required for the scope of work.
- Measure, lay out, cut, trim, thread, prepare and fit gas piping and tubing.
- Assemble and install pipe, tubing, fittings, unions, valves, regulators and other gas-system components.
- Coordinate with welders and other crew in successful field tie-ins and installation
- Verify field installation of fuel-gas piping, fittings, valves, supports and associated equipment against approved drawings and manufacturer's requirements.
- Identify the applicable gas-system test boundaries and required test conditions.
- Perform required pressure and leak testing of completed gas systems in accordance with the applicable CSA B149 requirements.
- Identify and correct leaks or installation deficiencies.
- Perform required purging and assist with introduction of fuel gas.
- Complete required test/installation documentation and support the gas permit inspection, as required.
- Valid Alberta Gasfitter Class A Journeyperson Certificate
- Working knowledge of:
- Alberta Safety Codes Act and Gas Code Regulation, AR 111/2010;
- CSA B149.1, Natural Gas and Propane Installation Code;
- CSA B149.3, Code for the Field Approval of Fuel-Burning Appliances and Equipment;
- Alberta gas permitting and inspection requirements.
- Willing to work or prior experience in field (industries such as oil & gas, chemical, fertilizer etc.).
- Able to interpret gas piping drawings, isometrics, P&IDs, equipment drawings, manufacturer's instructions and applicable test requirements.
- Experience installing industrial fuel-gas piping, equipment and fuel-gas systems, preferably flare, burner, pilot, or flame-front generator (FFG) systems.
- Experience in measuring, cutting, threading and assembling gas piping using tools such as pipe cutters, pipe threading machines and pipe vices
- Experience performing and documenting gas piping pressure/leak testing, purging, commissioning and gas-system safety checks.
- Able to coordinate with the field supervision, welders, Gas Safety Codes Officer/Authority Having Jurisdiction, owner, engineering and equipment manufacturer as required.
- Additional Steamfitter - Pipefitter certificate will be a plus
- Must be able to lift up to 50 lbs regularly and perform repetitive physical tasks.
- Frequent standing, kneeling, bending, and working on hot surfaces, and variable weather conditions on field sites.
- Shift and overtime work as project demands; travel to customer sites regionally.
- Comfortable working at heights and on scaffold; ability to climb stairs and ladders.
More about this job
Responsibilities
Install and verify industrial fuel-gas piping and flare-related equipment, coordinating field tie-ins with welders and other crew members. Complete required permitting, pressure and leak testing, purging, commissioning support, documentation, and inspection activities in accordance with applicable codes and approved requirements.
Requirements
Requires a valid Alberta Gasfitter Class A Journeyperson Certificate and working knowledge of Alberta gas regulations, CSA B149.1 and B149.3, and permitting requirements. Candidates should have relevant field experience, be able to interpret technical drawings, and have experience installing and testing industrial fuel-gas systems; a Steamfitter-Pipefitter certificate is an asset.
Skills
- Industrial Fuel-Gas Piping Installation
- Gas Piping Measurement and Assembly
- Pipe Cutting and Threading
- Gas-System Pressure and Leak Testing
- Gas-System Purging and Commissioning
- Gas Code Compliance
- Drawing and Isometric Interpretation
- P&ID Interpretation
- Field Tie-Ins
- Combustion Equipment Installation
- Flare, Burner, Pilot, and FFG Systems
- Gas Permitting and Inspection
- Leak Detection and Correction
- Field Coordination
- Working at Heights
- Gas-System Safety Checks
Visa sponsorship
Not detected in the job text
Categories
- Trades
- Energy
- Construction
- Engineering
- Security & Safety
Keywords
- Gasfitter Class A
- Alberta Gasfitter Class A Journeyperson Certificate
- Industrial Flare Installation
- Industrial Fuel-Gas Piping
- Alberta Safety Codes Act
- Alberta Gas Code Regulation
- AR 111/2010
- CSA B149.1
- CSA B149.3
- Gas Permitting
- Gas Inspection
- Pressure Testing
- Leak Testing
- Purging
- Commissioning
- Pilot Gas
- Flame-Front Generator (FFG)
- Combustion Equipment
- Pipe Threading Machine
- Pipe Cutters
- Pipe Vices
- P&IDs
- Isometric Drawings
- Gas Regulators
- Gas Valves
- Field Tie-Ins
- Approved Drawings
- Manufacturer's Instructions
- Steamfitter-Pipefitter Certificate