Mechanical engineer jobs in Toronto, ON and nearby

Mechanical engineer jobs within 25 km of Toronto, ON, Canada. Nearby towns and cities are included. Distances are straight-line, not driving distances.

Counted Nov 2, 2026

Hiring at a glance

View jobs

Open jobs: 209
Employers: 99

Advertised starting pay

Average starting payCAD / year: $107,065Across 31 listings

Employer-advertised starting pay, not employee salaries. Currencies and pay periods stay separate.

Where work happens

Remote: 0%0 listings
Hybrid: 42%87 listings
On-site: 58%122 listings

Employers hiring include AtkinsRéalis (16), WSP in Canada (14), CRB (11).

Sources & calculation notes

These figures describe the listings on this role page at the date shown, not the whole job market. Listings can change.

Employer-listed minimums from at least 10 listings per currency and pay period. These are advertised starting amounts, not employee salaries. Jobs without a minimum and unusual amounts are excluded.

Hybrid and on-site classifications may be inferred from descriptions. Check the original ad. How we count

Mechanical engineer jobs in Toronto, ON and nearby

Within 25 km

Email me new jobs Save this search

Added 4 months ago
CM
Mechanical Engineering Lead, Capital Projects
Cyclic Materials
Toronto, Ontario
- Full-time
Added 5 months ago
Mechanical Engineer/Designer (E1 Engine)
Canada Rocket Company
Toronto, ON
Canada Rocket Company is building a sovereign launch capability for Canada. We're looking for a Mechanical Engineer / Mechanical Design Specialist to support the design, development, and…
Added 5 months ago
L
Vision / Robotics Engineer
Loombotic
Toronto, ON
- Full-time
Added 5 months ago
L
Mechanical Design Engineer
Loombotic
Toronto, ON
- Full-time
Added 5 months ago
L
Vision / Robotics Engineer
Loombotic
Toronto, Ontario
- $135,000 to $185,000 USD / year
- Full-time
Added 1 month ago
C
Mechanical Engineer Intern (Summer 2027)
CRB
Toronto, ON
- Internship
Added 5 months ago
T
Staff Mechanical Design Engineer
Tesla
Richmond Hill, Ontario
- Full-time
As a Mechanical Designer or Design Engineer on Tesla Toronto’s Automation team, you will be responsible for the design of cutting edge, world-class machinery used across the entirety of…
Added 5 months ago
B&
Mechanical Engineer - Nuclear Power
Black & Veatch
Markham, Ontario
- Full-time
Added 3 months ago
A
Mechanical Design Engineer- Nuclear
AtkinsRéalis
Mississauga, ON
- Full-time
Perform conceptual, preliminary and detailed mechanical design engineering work for reactor components to applicable codes, standards and procedures meeting quality, budget,
Added 3 months ago
A
Mechanical Design Engineer- Nuclear
AtkinsRéalis
Mississauga, ON
- Full-time
Added 1 month ago
Mechanical Design Engineer
Alstom
Toronto, ON
Could you be the full-time Mechanical Design Engineer in Toron
Added 1 month ago
Principal Mechanical Engineer
Mott MacDonald
Toronto, ON
Added 1 month ago
Mechanical Engineer, Senior - Nuclear, Bowmanville EOI
Hatch
Mississauga, ON
Added 3 months ago
S&
Senior Mechanical Engineer
Sargent & Lundy
Toronto, ON
- Full-time
Added 1 month ago
C
Mechanical Engineer Intern (Summer 2027)
CRB
Toronto, ON
- Internship
Added 6 months ago
UG
Mechanical Engineer
Universal Green Packaging Inc.
North York, Ontario
- Full-time
Added 1 month ago
Senior Mechanical Engineer
Mott MacDonald
Toronto, ON
Added 3 months ago
C
Mechanical Engineer III
CRB
Mississauga, Ontario
- $100,000 to $135,000 CAD / year
- Full-time
Added 4 months ago
FF
Mechanical Engineer Lead
Fusion Fuel Cycles Inc.
Ottawa, Ontario
- Full-time
The Mechanical Engineer Lead is responsible for leading mechanical engineering scope on assigned projects from concept through design, procurement, fabrication support, installation and…
Added 1 month ago
L
Principal Mechanical Engineer (EPCM/Minerals)
Lycopodium
Mississauga, ON
- Full-time
The Principal Mechanical Design Engineer will have the capacity to wor
Added 2 months ago
Structural - Nuclear Engineer
Hatch
Mississauga, ON
Added 2 months ago
Mechanical Engineer - Metals
Hatch
Mississauga, ON
Added 2 months ago
Senior Mechanical Engineer - Metals
Hatch
Mississauga, ON
Added 2 months ago
Mechanical Piping Engineer - Metals
Hatch
Mississauga, ON
Added 4 months ago
C
Lead Mechanical Engineer
CRB
Mississauga, Ontario
- $130,000 to $165,000 CAD / year
- Full-time

Loombotic

Vision / Robotics Engineer

Toronto, ON, Canada

$135,000 to $185,000 USD / year · Full-time

Apply About employer

Applications open in a new tab.

Job details

Pay: $135,000 to $185,000 USD / year
Job type: Full-time
Posting language: English
Posted: Jun 4, 2026

Original job description

About Loombotic

Loombotic is automating the wire harness, the hand-built nervous system inside every robot, vehicle, and machine. It is one of the last big manufacturing processes still done almost entirely by hand, and we are changing that by building our own instant-quoting software and our own machines, shipping a custom harness in about a week instead of 6 to 12. Teams building robotics, aerospace, and advanced thermal and data-center hardware rely on us to get custom cables in days, not months.

This role builds the perception and robotics at the heart of that.

The role

You'll build the perception and robotics that let our automated line handle wires, connectors, and terminals - parts that are flexible, small, and hard for traditional automation. That means vision systems that find and orient connectors and wire ends, and robot motion that picks, places, routes, and terminates reliably on a real production floor. You'll own problems end-to-end, from prototype on the bench to running in production, working shoulder-to-shoulder with mechanical, controls, and the technicians who run the line.

Problems you'll get to solve

A few of the problems you'd actually work on:

Get a robot to reliably pick, orient, and place wires and connectors: flexible, shiny parts that have to be placed and seated to sub-millimeter precision, the kind of work traditional automation chokes on
Build vision that finds and localizes a specific connector, terminal, or wire end in clutter, under real factory lighting, fast enough to keep cycle time low
Solve high-precision insertion and termination: seating a terminal in the right cavity every time, at the tolerances harnesses demand
Drive a vision-guided task from works-in-a-demo to runs-untended on the line, by understanding both the algorithm and how the part actually behaves
Make it robust enough to run unattended on a production line, not just in a demo

What you'll do

Build vision pipelines (classical CV and/or ML) for detecting, segmenting, and estimating the pose of connectors, terminals, and wire ends
Develop and tune robot motion for pick/place, routing, insertion, and termination tasks
Handle camera/robot calibration, hand-eye calibration, and the gritty real-world edge cases
Close the loop with mechanical and controls engineers on end effectors, fixtures, and machine design
Deploy, monitor, and harden systems running on the production floor; debug failures with real parts
Measure and drive up cycle time, yield, and reliability

You are

Hands-on with both code and hardware - happy at a workstation and on the floor with the machine
Rigorous about making things work reliably in the real world, not just in a demo
A fast iterator who learns from physical failure modes
A strong collaborator across mechanical, controls, and production
More interested in the line running reliably than in who gets credit for the fix

Minimum qualifications

Experience building robotics and/or computer-vision systems that ran on real hardware
Strong programming in Python and/or C++
Solid grasp of camera calibration, coordinate frames/transforms, and robotic manipulation
Comfortable working on-site in Austin, TX with physical equipment
Legally authorized to work in the U.S. or Canada

Nice to have

Industrial robot arms, motion control, or real-time systems
6-DoF pose estimation, deep learning for perception, or sensor fusion
Manufacturing automation, machine building, or NPI on a production line
Working with deformable/flexible objects (wires, cables, fabric)
ROS or equivalent robotics frameworks
Bonus: serious Factorio (or other factory-builder game) playtime. If optimizing automated factories for fun sounds like you, you'll fit right in.

What we care about

We care about engineers who close the loop on hard physical problems. The best person here gets a flaky vision-guided insertion from 80% to 99.9% because they understand both the algorithm and the way the part actually behaves on the floor. We want people who want to automate something the industry says can't be automated.

Compensation & benefits

$135k-$185k base + meaningful early-stage equity, 0.25% to 0.75% (most offers 0.3-0.5%; 0.6-0.75% for an early senior or lead), 4-year vest, 1-year cliff. Typical hire $145-160k; $170-185k for a senior or lead
Medical, dental, and vision coverage
Paid time off and company holidays
Top-tier hardware, tools, and lab access
Access to our engineering lab and tools for approved personal projects. We like people who build things

How to apply

Apply with your resume (and any projects/demos) and short answers to:

Describe a vision or robotics system you took from prototype to working reliably on real hardware. What broke, and how did you fix it?
What's your experience with manipulation, pose estimation, or robot motion?
Why Loombotic / why automating harness manufacturing?

Loombotic is an equal opportunity employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic. We provide reasonable accommodations for applicants with disabilities; if you need one during the hiring process, just ask.

Apply About employer

More about this job

Responsibilities

You will build the perception and robotics systems that allow automated lines to handle wires and connectors. This includes developing vision systems and robot motion for precise tasks in a production environment.

Requirements

Candidates should have experience in building robotics and computer-vision systems that operate on real hardware. Strong programming skills in Python and/or C++, along with a solid understanding of camera calibration and robotic manipulation, are essential.

Skills

Robotics
Computer Vision
Python
C++
Camera Calibration
Robotic Manipulation
Motion Control
Deep Learning
Sensor Fusion
Manufacturing Automation
NPI
Pose Estimation
ROS
Collaboration
Problem Solving
Debugging

Benefits

Health Insurance
Stock Options
Paid Time Off
Company Holidays

Visa sponsorship

Not detected in the job text

Keywords

Vision Systems
Robotics
Automation
Wire Harness
Machine Learning
Production Floor
Cycle Time
Yield
Reliability
End Effectors
Fixtures
Machine Design
Debugging
Camera Calibration
Coordinate Frames
Real-World Edge Cases
Flexible Objects

Report this job