Find work in Canada.

507,561 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 12 mins ago
K
Asset Optimization Engineer
Keyera
Medicine Hat, AB · Empress, SK
- Full-time
…serves as the key liaison with Business Development, leading engineering support for Stage 0 project ideation, feasibility evaluation, and recommendation for cancellation or…
Added 12 mins ago
CG
Environmental Health and Safety Leader
C.H. Guenther & Son
Calgary, AB
- Full-time
…variety of stakeholders including but not limited to supervision, engineering, and shop floor…
Added 12 mins ago
M
Toolmaker Apprentice - 2nd or 3rd Year
Multimatic
East Gwillimbury, ON · Multimatic Dynamic Suspensions
- Full-time
Assist machinists with the manufacturing of spare parts.
Added 12 mins ago
LC
Material Handler
Linamar Corporation
Guelph, ON
- Full-time
The Material Handler is responsible for operating forklifts and other material handling equipment to move, load and unload materials and productions within the manufacturing facility.
Added 26 mins ago
BI
Mechanical Designer
Barski Industries (1985) Ltd.
West Kelowna, BC
- Full-time
…components for wastewater lift stations. You will collaborate with engineering teams to produce high-quality drawings, models, and specifications. Your expertise in AutoCAD will play a key…
Added 26 mins ago
BI
Estimator
Barski Industries (1985) Ltd.
West Kelowna, BC
- Full-time
…solutions. Since 1985, we have built a reputation for excellence in manufacturing and supporting critical municipal and industrial infrastructure across…
Added 26 mins ago
GN
Project Manager, BC
Guldmann North America
Vancouver, BC
- Full-time
…from commercial handoff and site assessment through planning, engineering coordination, installation, financial control, customer acceptance, and…
Added 26 mins ago
JA
Senior Technician- Rolls-Royce M250 Engine
JMC Aviation
Vancouver, BC
- Full-time
Use OEM manuals, service bulletins, and engineering drawings to guide maintenance procedures.
Added 26 mins ago
QC
Lead Hardware Engineer (Ottawa)
Quarry Consulting
Ottawa, ON · Greater Ottawa Metropolitan Area
- Full-time
In-depth understanding of the full hardware product development cycle: requirements, architecture, schematic capture, PCB layout, signal integrity, verification, and manufacturing
Added 26 mins ago
IS
Maintenance Technician
InVision Staffing Services Inc.
Brampton, ON
- Full-time
InVision is a Professional Recruitment Firm specializing in Engineering, Industrial/Skilled Trades, Information Technology and Professional Services within Canada and the U.S. We have a…
Added 26 mins ago
GN
Curtain Wall Design Drafter
Gutmann North America
Oakville, ON
- Full-time
Support project teams throughout the full project lifecycle, including design-assist, value engineering, testing, fabrication, and installation.
Added 26 mins ago
T&
President
Torrey & Gray
Ottawa, ON · Greater Ottawa Metropolitan Area
- Full-time
15+ years of leadership experience in engineering or manufacturing, with a proven track record of business growth.
Added 27 mins ago
BG
Senior Procurement Analyst - Property Management
Brandt Group of Companies
Zehner
- Full-time
Bachelor’s degree in business, Finance, Engineering, or Supply Chain Management.
Added 27 mins ago
BG
Heavy Equipment Technician - Shop - Afternoon Shift
Brandt Group of Companies
Ottawa, ON · Carlsbad Springs, ON
- Full-time
Added 27 mins ago
PP
Cosmetic and Personal Care Large Scale Product Batcher
Prime Potions Inc
Burnaby, BC
- Full-time
…the personal care industry as well as a person that enjoys a manufacturing setting that requires them to be on their feet. The ideal candidate fits the profile with a related background in…
Added 27 mins ago
BG
Procurement Analyst
Brandt Group of Companies
Zehner
- Full-time
Post-secondary education in Business Administration, Engineering, Economics or Supply Chain
Added 27 mins ago
D
Field Service Engineer (Calgary)
DiaSorin
Mississauga, ON
- $85,000 to $100,000 CAD / year
Laboratory Technician, AA Electronics, Engineering Technician or equivalent required
Added 27 mins ago
Reliability Coordinator
Domtar Products
Port Mellon, BC
Bachelor of Engineering or Certified Red Seal Trade with 2 or more years’ experience
Added 27 mins ago
LI
Field Service Specialist
LGG Industrial
Oshawa, ON
- Full-time
Added 27 mins ago
A
Estimator, Camp Services
ATCO
Calgary, AB
- Full-time
Post-secondary education in Business, Finance, Accounting, Construction Management, Engineering Technology, Quantity Surveying, Commerce, Hospitality Management, Supply Chain, or a related…
Added 27 mins ago
R
Operations Strategy, Sr Manager/Gestionnaire principal, stratégie des opérations
RTX
Longueuil, QC
- Full-time
Added 42 mins ago
CL
Senior Shop Technician - Electromechanic
Comairco, LLC
Laval, QC
- Full-time
Added 42 mins ago
JA
Senior Technician- Rolls-Royce M250 Engine
JMC Aviation
Dorval, QC
- Full-time
Use OEM manuals, service bulletins, and engineering drawings to guide maintenance procedures.
Added 42 mins ago
BG
Purchasing Manager - Power Systems
Brandt Group of Companies
Zehner
- Full-time
The Purchasing Manager will collaborate with internal stakeholders, engineering teams, and procurement functions to implement effective sourcing strategies, manage supplier performance,…
Added 42 mins ago
AC
Test Engineer
Amaris Consulting | Part of Mantu
ON · Ontario, Canada
- Full-time
Support turnkey Protection & Control projects, collaborating with engineering teams and customers to troubleshoot technical issues and ensure successful project delivery.

MEDA Engineering & Technical Services

Quality Engineering Technician [14450]

Port Hope, ON, Canada

$60,000 to $90,000 CAD / year · Full-time

Apply About employer

Applications open in a new tab.

Job details

Pay: $60,000 to $90,000 CAD / year
Job type: Full-time
Apply by: Nov 26, 2026
Posting language: English
Posted: Oct 27, 2026

Original job description

We are recruiting an experienced Quality Engineering Technician to join our team to support our client in the automotive industry.

NOTE:

12-month contract

RESPONSIBILITIES:

Design and implementation of policies and procedures to ensure that quality standards are met during production
Oversees testing of processes and products
Familiar with a variety of the field's concepts, practices, and procedures
Relies on extensive experience and judgment to plan and accomplish goals
Take strong supplier quality skills and apply them to our supply base
Practices robust product containment for all customer concerns and leads a cross-functional team in RC/CA investigations while contributing to Plant SQDCM (Safety, Quality, Delivery, Cost, Morale) objectives
Coordinates and prepares all New Model documentation and event part data related to customer quality system requirements
Completes, with cooperation from Quality and Production staff, all applicable Quality Standards, flow charts, control plans, and FMEA's necessary for customer approval
Experienced with APQP (advanced product quality planning) procedures and documentation. Updates all documentation as required
Knowledge of all applicable customer portals and applications
Participates in all new program start-ups to determine and communicate required schedules for necessary documentation
Performs planned, periodic audits of all areas of the quality system including design controls for compliance to applicable government regulations and to company policies and procedures
Performs re-audits of deficient matters and corrective actions, as needed and required. Identifies lessons learned and read across
Working in Supplier Quality and has performed supplier audits when necessary
Documents audit results in written audit reports that are distributed and reviewed by appropriate management
Monitors program performance after implementation to prevent reoccurrence of program operating problems and ensure efficiency of operation
Responsible for form control of quality standards, process quality control charts, SPC, control plans, and failure mode effect analysis
Updates all necessary quality documentation, as a result of process changes, design changes, etc.'. on an as-needed basis, and distributes internally and to effected customer
Creates FR and follows through to completion
Trains any/all identified associates on the interpretation of any/all quality documents
Directs sampling inspection, and testing of received parts, components, and materials to determine conformance to standards
Reviews quality problems with engineering personnel and directs action required to correct defects
Supports onsite customer liaison where applicable by providing part information, clean points, corrective actions, etc.
Annual Review of the CSR for warranty (Stellantis = CQI-14 Self Assessment)
Provides compliance expertise to Quality Assurance, Engineering, Product Development, Operations, Finance, Human Resources, and Information Technology
Serves as a team leader, making recommendations and corrective actions, which are required regarding audit results, and compliance to written procedures or applicable government regulations
Maintains files containing audit reports, re-audit reports, and audit responses, and pertinent corrective action follow-up for audits conducted
Provides advice and guidance to less seasoned Quality System Auditors
Maintains abreast of regulatory changes through industry publications, seminars, participation in trade organizations, and government meetings
Ensures proper documentation and communication under IATF 16949
Ensures a customer focus at all times, in compliance with IATF 16949
Knowledgeable of all relevant policies, procedures and processes under IATF 16949

REQUIRED SKILLS & QUALIFICATIONS:

Bachelor’s degree or Diploma in the field of Science in Engineering or related
Minimum of three (3) years’ experience in quality assurance, quality control
Proficient oral and written communication skills
Ability to read and comprehend instructions, regulations and industry standards, correspondence, and memos
Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization
Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry
Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situation
Must be able to use Excel spreadsheet as well as create and maintain charts and data for use in managing quality systems
Ability to use statistical analysis and SPC methods
Must be able to make decisions regarding solutions for quality problems while considering demands of product quality, customer needs, production schedules, and time pressures

COMPENSATION & BENEFITS:

$60, 000 - $80, 000/year (depending on experience)
Paid Benefits after 90 days (individual and family) – extended medical, out-of-country coverage, dental etc.
Pension eligibility, with employer match, after 1 full year of work (open enrollment every October)

MEDA offers an excellent referral bonus. Great candidates know great candidates.

MEDA Limited is an equal opportunity employer and does not discriminate in employment on the basis of any of the protected reasons as described in the Ontario Human Rights Code. We are committed to providing accommodation for persons with disabilities, as described in the Accessibility for Ontarians with Disabilities Act, 2005, reasonable accommodation requests will be reviewed and granted to those that request assistance during our hiring process.

Apply About employer

More about this job

Responsibilities

Oversee quality systems and product/process conformance, including supplier quality, audits, inspections, containment, and corrective-action investigations. Coordinate customer and new-model quality documentation, maintain compliance with IATF 16949 and applicable regulations, and train staff on quality requirements.

Requirements

Requires a bachelor’s degree or diploma in engineering science or a related field and at least three years of quality assurance or quality control experience. Candidates must have strong communication and problem-solving abilities, proficiency with Excel and statistical process control, and the ability to make quality decisions while balancing customer needs and production demands.

Skills

Quality Assurance
Quality Control
Supplier Quality
Supplier Audits
Root Cause And Corrective Action Investigations
APQP
IATF 16949
FMEA
Control Plans
Statistical Process Control
Quality Auditing
Corrective Actions
Excel
Statistical Analysis
Customer Quality Systems
Technical Communication

Benefits

Extended Medical Benefits
Out-Of-Country Coverage
Dental Benefits
Employer-Matched Pension
Referral Bonus

Visa sponsorship

Not detected in the job text

Keywords

Automotive
Quality Assurance
Quality Control
Supplier Quality
Supplier Audits
APQP
IATF 16949
FMEA
Control Plans
Statistical Process Control
SPC
Root Cause Analysis
Corrective Action
Product Containment
Quality Audits
New Model Documentation
Customer Quality Systems
Process Quality Control Charts
Sampling Inspection
Product Testing
Warranty
CQI-14
Excel
Statistical Analysis
Regulatory Compliance
Continuous Improvement
SQDCM
Quality Standards

Report this job