Find work in Canada.

548,629 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 9 mins ago
B
Senior Product Manager
Blazesoft
Concord, ON
- Full-time
We're looking for a Senior Product Manager from the casino, iGaming, or sweepstakes industry who has been around the block, someone who does not need hand-holding to navigate a complex,…
Added 40 mins ago
SH
Maintenance II
Shared Health-Soins Communs
Dauphin, MB
- Full-time
Ensures driveways, parking areas and building exits are clear of snow, ice and other debris at all times.
Added 1 hour ago
Maintenance II
Winnipeg Regional Health Authority
Dauphin, MB
Ensures driveways, parking areas and building exits are clear of snow, ice and other debris at all times.
Added 1 hour ago
R|
Clinical Research Manager
RI-MUHC | Research Institute of the MUHC | #rimuhc
Montreal, QC
- Full-time
…governmental guidelines and regulations, the Clinical Trial Project Manager is responsible for the operational management of multicentre clinical research studies. The Project Manager…
Added 1 hour ago
R|
Project Manager
RI-MUHC | Research Institute of the MUHC | #rimuhc
Montreal, QC
- Contract
The Centre for Precision Psychiatry – Quebec (CPPQ) is seeking a project manager for our large-scale longitudinal mental health research project across three clinical research sites,…
Added 1 hour ago
R|
MRI Technologist
RI-MUHC | Research Institute of the MUHC | #rimuhc
Montreal, QC
- Full-time
Work under the supervision of the CMR supervisor and Project manager.
Added 1 hour ago
R|
Clinical Research Coordinator – Nurse - CIM - Phase 1 Oncology
RI-MUHC | Research Institute of the MUHC | #rimuhc
Montreal, QC
- Full-time
Under the supervision of the Manager of Oncology Research, Centre for Innovative Medicine (CIM), the Clinical Research Coordinator - Nurse is responsible for supporting the successful…
Added 1 hour ago
R|
Clinical Research Coordinator - Regulatory Affairs (CIM)
RI-MUHC | Research Institute of the MUHC | #rimuhc
Montreal, QC
- Full-time
Under the supervision of the Manager, Clinical Research Administration Centre for Innovative Medicine (CIM), the incumbent is responsible for supporting the submission of clinical research…
Added 1 hour ago
R|
Licensed Practical Nurse (LPN) or Research Nurse
RI-MUHC | Research Institute of the MUHC | #rimuhc
Montreal, QC
- Full-time
…the team by completing additional tasks as directed by the…
Added 1 hour ago
R|
Clinical Research Coordinator - Nurse (CIM)
RI-MUHC | Research Institute of the MUHC | #rimuhc
Montreal, QC
- Contract
Under the supervision of the Manager, Pediatric and Adult Research, Centre for Innovative Medicine (CIM), the Clinical Research Coordinator - Nurse is responsible for supporting the…
Added 1 hour ago
Assistant Resident Manager
Realstar
Cornwall, ON
We are currently seeking an Assistant Resident Manager to live and work at one of our properties in Cornwall. This position would require you to live on-site and work four weekdays each…
Added 1 hour ago
Maintenance Manager
Realstar
Toronto, ON
We are currently seeking a Maintenance Manager to work and live at one of our properties located in Toronto/North York area. The Maintenance Manager provides critical hands-on leadership in…
Added 2 hours ago
TH
Lot Associate : Part Time - MARLBOROUGH
The Home Depot Canada
Calgary, AB
- Part-time
The Lot Associate's primary responsibility is to load orders into customer vehicles and ensuring the parking lot is safe and welcoming for the customer. Customer service and GET behaviours…
Added 2 hours ago
TH
Lot Associate: Part Time - CHINOOK
The Home Depot Canada
Calgary, AB
- Part-time
The Lot Associate's primary responsibility is to load orders into customer vehicles and ensuring the parking lot is safe and welcoming for the customer. Customer service and GET behaviours…
Added 3 hours ago
PC
Physiotherapist, Full Time, Multi Unit (P2/H2)
Providence Care
Kingston, ON
- Full-time
Under the general direction of the Program Manager, the Physiotherapist provides assessment of assigned clients, and develops and implements individual and group physiotherapy treatment…
Added 3 hours ago
BC
Registered Practical Nurse - Operating Room
Brant Community Healthcare System
Brantford, ON
- Full-time
Discounted onsite parking (no shuttles or waiting lists)
Added 3 hours ago
BC
Registered Practical Nurse - Operating Room
Brant Community Healthcare System
Brantford, ON
- Full-time
Discounted onsite parking (no shuttles or waiting lists)
Added 3 hours ago
BC
Registered Nurse - Operating Room
Brant Community Healthcare System
Brantford, ON
- Full-time
Discounted onsite parking (no shuttles or waiting lists)
Added 3 hours ago
BC
Medical Radiation Technologist
Brant Community Healthcare System
Brantford, ON
- Full-time
Discounted onsite parking (no shuttles or waiting lists)
Added 5 hours ago
RO
Farm Operations Manager – Harvest & Crop Handling
Rubicon Organics™
Delta, BC
- $90,000 to $92,000 CAD / year
- Full-time
The Farm Operations Manager – Harvest & Crop Handling leads and oversees agricultural operations associated with greenhouse crop harvesting, crop handling, and preparation for subsequent…
Added 5 hours ago
G
Gestionnaire marketing produit / Product Marketing Manager
Genetec
Montreal, QC
- Full-time
Added 5 hours ago
NR
hotel general manager
Nomi Resort
Harcourt, ON
- Full-time
Food service, waiter/waitress and dining room management/manager
Added 6 hours ago
SL
Engineering Manager
Strescon Limited
Saint John, NB
- Full-time
…concrete products including bridge girders, wall panels, complete parking garages, hollowcore slabs, precast pile, and deck slabs. Strescon presently has two facilities: 70,000 sq. ft. in…
Added 6 hours ago
YH
Pharmacy Technician II - Pharmacy - Regular Full-Time
Yukon Hospital
Whitehorse, YT
- Full-time
Reporting to the Pharmacy Manager, the incumbent, as part of the Pharmacy team, performs complex duties such as manufacturing various sterile products, intravenous solutions, and…
Added 6 hours ago
YH
Pharmacy Technician II - Pharmacy - Term Full-Time
Yukon Hospital
Whitehorse, YT
- Full-time
Reporting to the Pharmacy Manager, the incumbent, as part of the Pharmacy team, performs complex duties such as manufacturing various sterile products, intravenous solutions, and…

Midwest

Engineer-in-Training (EIT), Calgary

Calgary, AB, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Nov 29, 2026
Experience: 1 to 4 years of progressive engineering, co-op, or internship experience in oil and gas, midstream pipelines, mechanical facilities, or consulting engineering.
Posting language: English
Posted: Oct 30, 2026

Original job description

Come Grow with Us!

Since 1949, Midwest has served Western Canada as a trusted, employee-owned partner in geomatics. We have successfully expanded into a multidisciplinary firm, with a proven track record of delivering specialized midstream engineering projects across the region. We focus on building lasting relationships with clients by providing industry-leading project solutions that are customer-centric and technology-driven. Our success is defined by engaged employees, unbending safe work practices, loyal clients and doing the right thing.

We are looking for an Engineer-in-Training (EIT) to support our Engineering and Major Pipeline Projects team from our Calgary location. The largest city in Alberta, Calgary, is known for its rich culture, amazing food scene and Rocky Mountains which provide ideal spots for skiing, snowboarding and other outdoor recreation. Convenient access to the surreal mountains of Banff or the twisty canyons of the Badlands, Calgary has something for everyone. Click here to learn more about what this Metropolitan Region has to offer!

Summary Of Responsibilities

Working under the direct supervision of the Senior Engineer and Major Pipeline Projects Manager, the Engineer-in-Training (EIT) supports midstream mechanical, pipeline, and facility engineering projects from conceptual design through construction completion. Duties include, but are not limited to, the following:

Assist in the engineering design and preparation of midstream deliverables from conceptual phase through construction support, including isometric plans, site plans, valve assembly plans, demolition drawings, bills of materials (BOMs), hydrostatic test plans and reports, and design basis memorandums (DBMs).
Apply fundamental mechanical and pipeline engineering principles, codes, and standards (CSA Z662, CSA Z245, ASME B31.3, ASME B31.4, and ASME B31.8) under the mentorship and technical direction of a Professional Engineer (P.Eng.).
Perform piping and pipeline stress modeling (AutoPIPE), wall thickness and pressure design checks, hydrotest pressure calculations, and crossing assessments (HDD, bore, and open cut).
Support the design and layout of meter and regulator stations, liquid pipeline and pump stations, launcher/receiver assemblies, pipeline alignment sheets, and site grading packages.
Prepare engineering calculation packages, spreadsheets, equipment data sheets, material take-offs (MTOs), and technical reports for P.Eng. authentication, ensuring client specifications and design inputs are accurately incorporated.
Coordinate with CAD/Civil 3D drafting, GIS, and Geomatics teams to integrate topographic survey data, 3D laser scans, and subsurface utility data into engineering design packages and resolve technical inquiries.
Adhere strictly to Midwest's Quality Management System (QMS), Professional Practice Management Plan (PPMP), and HSE safety requirements.
Assist Project Managers and Senior Engineers with technical proposals, JobBook specification scopes, cost estimates, project track sheet updates, and internal/client project meetings.
Participate in field site visits, facility walkdowns, as-built verifications, and construction support activities to gain practical operational experience.

What You Offer

Bachelor's degree in Mechanical, Civil, or Pipeline Engineering from an accredited university.
Registered, or eligible for immediate registration, as an Engineer-in-Training (EIT) with the Association of Professional Engineers and Geoscientists of Alberta (APEGA) or Engineers and Geoscientists BC (EGBC); or, for Ontario candidates, meeting the academic requirements for professional engineering licensure with Professional Engineers Ontario (PEO) and working toward the P.Eng. designation.
1 to 4 years of progressive engineering, co-op, or internship experience in oil and gas, midstream pipelines, mechanical facilities, or consulting engineering.
Foundational knowledge of Canadian pipeline and piping codes (CSA Z662, CSA Z245, ASME B31.3, ASME B31.4, and ASME B31.8) and midstream deliverables (isometrics, site and valve assembly plans, BOMs, hydrotest plans, and DBMs).
Proficiency with Microsoft Office (Word, Excel, Outlook) and working familiarity with AutoCAD / Civil 3D; exposure to piping stress analysis software (AutoPIPE) is considered a strong asset.
Valid Class 5 Driver's License and willingness to occasionally travel to field sites or client facilities; current oilfield safety certifications (CSTS, H2S Alive, Standard First Aid) are an asset.
Effective verbal and written communication skills for preparing technical reports, calculation notes, and collaborating across multidisciplinary teams.

Key Competencies And Behavioral Attributes

Highly motivated technical team member eager to apply engineering principles to midstream projects while progressing toward P.Eng. licensure.
Keenness to work in a fast-paced, high-volume multidisciplinary team environment alongside Senior Engineers, Project Managers, Land Surveyors, and Drafting staff.
Strong organizational and analytical skills with high attention to detail and accuracy in calculations and design documentation.
Receptive to technical mentorship, peer review, and continuous professional development.
Displays a professional image (appearance and behavior) at all times, with a strong work ethic and strict adherence to company safety and quality policies in both the office and the field.
Understands the ethical responsibilities of Engineers-in-Training and applicable professional legislation, regulations, practice standards, and manuals.

What We Offer

Employer-paid benefits package includes a flexible health spending account, extended health coverage, prescription coverage, emergency travel, life insurance, wellness fund, personal/sick days, and Employee Assistance Program.
Employee Education Assistance Program supports a culture of continuous learning, professional development, and opportunities for career advancement.
Generous vacation policy.
Employee recognition program.
Ample free parking with convenient access to city transportation.
On-site fitness centre.
Compassionate employer who welcomes you to bring your whole self to work.
Outstanding work environment that focuses on teamwork and collaboration.

If you are looking to further your career and think we are the right organization for you, we want to hear from you! For more information about Midwest careers and services, visit our website at www.midwest.ca.

We thank you for your interest, however only those selected for an interview will be contacted. APPLICANT MUST BE LEGALLY AUTHORIZED TO WORK IN CANADA. Validation of eligibility will be required if selected for an interview.

Apply About employer

More about this job

Responsibilities

Support midstream mechanical, pipeline, and facility engineering projects from conceptual design through construction, preparing design documents, calculations, reports, and technical deliverables. Coordinate with engineering, drafting, GIS, and geomatics teams; assist with project management activities; and participate in field visits and construction support while following quality, professional practice, and safety requirements.

Requirements

A bachelor's degree in Mechanical, Civil, or Pipeline Engineering and registration, or eligibility for immediate registration, as an Engineer-in-Training with the relevant provincial engineering regulator are required. The role seeks 1–4 years of relevant experience, foundational knowledge of Canadian pipeline and piping codes, proficiency with Microsoft Office, familiarity with AutoCAD or Civil 3D, and a valid Class 5 driver's licence.

Skills

Mechanical Engineering
Pipeline Engineering
Midstream Engineering
Pipeline and Piping Codes
Engineering Design
Piping Stress Analysis
AutoPIPE
AutoCAD
Civil 3D
Hydrostatic Testing
Pressure Design Calculations
Technical Reporting
Material Take-Offs
Project Coordination
Microsoft Office
Health, Safety, and Environment Compliance

Benefits

Flexible Health Spending Account
Extended Health Coverage
Prescription Coverage
Emergency Travel Coverage
Life Insurance
Wellness Fund
Personal and Sick Days
Employee Assistance Program
Education Assistance Program
Professional Development
Career Advancement Opportunities
Generous Vacation
Employee Recognition Program
Free Parking
On-Site Fitness Centre

Visa sponsorship

Not detected in the job text

Keywords

Midstream Engineering
Mechanical Engineering
Pipeline Engineering
Facility Engineering
CSA Z662
CSA Z245
ASME B31.3
ASME B31.4
ASME B31.8
AutoPIPE
AutoCAD
Civil 3D
GIS
Geomatics
3D Laser Scans
Piping Stress Modeling
Hydrostatic Testing
Pressure Design Checks
Horizontal Directional Drilling
Pipeline Alignment Sheets
Meter and Regulator Stations
Pump Stations
Bills of Materials
Material Take-Offs
Design Basis Memorandums
Quality Management System
HSE
APEGA
EGBC

Report this job