Find work in Canada.

347,202 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 1 hour ago
Senior High Voltage Design Engineer, Substations
IREN
Vancouver, BC
Reporting to the Vice President of Engineering, the Senior High Voltage Design Engineer acts as Owner's Engineer for the design of the high and medium voltage substations that connect our…
Added 8 hours ago
A
Electrical Engineer
Actalent
Montreal, QC
- $67 to $92 CAD / hour
- Contract
Job Title: Electrical Design Engineer Hydropower
Added 9 hours ago
GF
Electronics Engineer, Diagnostics and Data Acquisition
General Fusion
Vancouver, BC
- Full-time
…that deliver reliable measurements in an electrically noisy, high-voltage, pulsed-power…
Added 12 hours ago
CC
Testing and Commissioning Lead - Traction Power
Colas Canada Inc.
Edmonton, AB
- Contract
Medium Voltage (MV) and Low Voltage (LV) Power Systems
Added 13 hours ago
R
SCADA Transmission Engineer
Raise
Burnaby, BC
- Full-time
The SCADA Transmission Engineer to join our clients team and play a key role in delivering complex, multi-discipline capital projects. In this role, your primary focus will be delivering…
Added 14 hours ago
Director, High Voltage Infrastructure, Pacific Link
Trans Mountain
Calgary, AB
…values driven individual to join our dynamic team as a Director, High Voltage Infrastructure, Pacific Link. In this position, you will play a key role in developing and executing the…
Added 17 hours ago
KG
Transmission Line Engineer
Kosmos Group
Burnaby, BC
- Full-time
…utility infrastructure, including both overhead and underground high-voltage line design. Projects are primarily for utility clients to design, plan, and improve the modern electric…
Added 18 hours ago
W
Lead Electrical Engineer, Power Distribution
Worley
Oakville, ON
- Full-time
The Lead Electrical Engineer is responsible for providing technical leadership and delivering electrical engineering solutions for power distribution, energy storage, and related energy…
Added 18 hours ago
W
Lead Electrical Engineer, Power Distribution
Worley
Markham, ON
- Full-time
The Lead Electrical Engineer is responsible for providing technical leadership and delivering electrical engineering solutions for power distribution, energy storage, and related energy…
Added 18 hours ago
RT
Protection and Control Designer (Mid-Level)
RCM Technologies, Inc.
Mississauga, ON
- Full-time
The successful candidate will prepare protection and control design packages for high voltage substation projects, working independently with minimal guidance under the direction of the…
Added 19 hours ago
AG
Electrical & Controls Project Engineer
Artemis Gold - Blackwater Project
Vancouver, BC
- Other
Reporting to the Engineering Manager - Capital Projects the Electrical and Controls Project Engineer is responsible for design and overseeing the planning, execution, and commissioning of…
Added 19 hours ago
ME
Electrical Engineer
Morson Edge
Burnaby, BC
- $60 to $75 CAD / hour
- Contract
The P&C Engineering SCADA Design Team provides engineering expertise and support to high voltage transmission substations, generating stations and distribution facilities. Our team also…
Added 1 day ago
AN
Senior Airport Electrical Engineer
Avia NG Airport Consultants
Calgary, AB
- $120,000 to $170,000 CAD / year
- Full-time
- On-site
…number. This passion motivates and drives us to deliver timely, high quality and innovative services to our clients and business partners. We like to think this has been the reason we?ve…
Added 1 day ago
PE
Intermediate/Senior Industrial Control Systems Engineer/Technologist - VIC-1070
PBX Engineering
Victoria, BC
- $95,000 to $130,000 CAD / year
- Full-time
Experience with low voltage power distribution systems
Added 1 day ago
SS
Electrical Designer / Drafter
Sunbelt Solomon
AB · Edmonton, AB
- Full-time
…electricity running. Our solutions span low-, medium-, and high-voltage systems, covering the complete electrical lifecycle, from design and engineering to operation, maintenance,…
Added 1 day ago
BC
Industrial Electrical Engineer - Mining and Metals
BBA Consultants
Quebec, QC
- Full-time
…execution, including proposals, analysis studies for industrial power systems, detailed engineering, equipment specifications, site surveys, site monitoring and commissioning of substation…
Added 1 day ago
AC
Senior Programme Manager- Electrification
Accenture Construct
Toronto, ON
- Full-time
At Accenture Construct, that's the job. You'll help deliver the data centers, power grids, rail networks, factories and public infrastructure that keep communities moving - smarter, safer…
Added 1 day ago
AO
Electrical Engineer
AML Oceanographic Ltd.
Saanichton, BC
- $87,500 to $104,000 CAD / year
- Full-time
Low Voltage Power Systems: Experience with low power systems in remote environments.
Added 1 day ago
AO
Electrical Engineer
AML Oceanographic Ltd.
Dartmouth, NS
- $87,500 to $104,000 CAD / year
- Full-time
Low Voltage Power Systems: Experience with low power systems in remote environments.
Added 1 day ago
B&
Staff Transmission Engineer - Transmission & Distribution (Toronto)
Burns & McDonnell
Toronto, ON
- Full-time
The Staff Transmission Engineer will work on project teams to create world class designs for new projects, alterations and redevelopments on a variety of projects including underground and…
Added 1 day ago
BC
Industrial Electrical Engineer - Mining and Metals
BBA Consultants
Mont-Saint-Hilaire, QC · Mont-St-Hilaire, QC
- Full-time
…execution, including proposals, analysis studies for industrial power systems, detailed engineering, equipment specifications, site surveys, site monitoring and commissioning of substation…
Added 1 day ago
BC
Industrial Electrical Engineer - Mining and Metals
BBA Consultants
Montreal, QC
- Full-time
…execution, including proposals, analysis studies for industrial power systems, detailed engineering, equipment specifications, site surveys, site monitoring and commissioning of substation…
Added 1 day ago
NN
Sales Engineer- Montreal (m/f/d)
Nordex North America
Montreal, QC
- Full-time
The role of Sales Engineer directly supports the company’s mission to develop and deliver clean power plants that make 100% renewable energy a reality for the world. As a Sales Engineer,…
Added 1 day ago
OP
Electrical, Plant Engineer/Officer
Ontario Power Generation
Timmins, ON
- Full-time
Ontario Power Generation (OPG) is looking for a dynamic, strategic and results-driven professional to join our team in the role of Electrical, Plant Engineer/Officer.
Added 2 days ago
SS
Field Service Technician
Sécheron SA
Montreal, QC
- Full-time
Rectifiers, power converters, and voltage limiting devices;

Morson Edge

Electrical Engineer

Burnaby, BC, Canada

$60 to $75 CAD / hour · Contract

Apply About employer

Applications open in a new tab.

Job details

Pay: $60 to $75 CAD / hour
Job type: Contract
Apply by: Nov 8, 2026
Posting language: English
Posted: Oct 9, 2026

Original job description

Role: E3 Electrical Engineer – P&C / SCADA Systems Design Team

Location: Burnaby, BC - Edmonds Office, Burnaby or Travel to substations as required

Duration: November 2, 2026 - November 2, 2027

Max T4 Rate: $62.67/

Max INC Rate: $75.80/

General Description

The E3 – Engineer is a fully qualified and accredited engineering professional who applies theoretical and practical knowledge to provide engineering design, estimating, planning, and quality management services for low to medium complexity projects and/or operations safely, with quality, within budget, and on time.

Experience and Role Accountabilities

A minimum four (4) years of in a relevant engineering field or equivalent.

Develop safe engineering solutions by using initiative and judgement to perform activities such as developing designs, analyzing and resolving problems, and interpreting engineering specifications on low to medium complexity assignments for projects and/or operations.

Assist project or operations management to meet safety, cost, quality, and time objectives by performing activities such as proposing changes in plans and estimated costs, recommending payment for work completed by contractors, preparing progress reports, coordinating work schedules and other similar tasks.

Participate in BC Hydro’s engineering practice by conducting independent studies and analysis, exercising judgment in selecting and interpreting information, recommending safe engineering designs, and making typical decisions related to standard methods and designs so that BC Hydro’s engineering standards are maintained.

Perform periodic tasks independently which may include on-site construction quality control and monitoring to ensure design compliance.

Engage with BC Hydro’s senior engineering team where engineering problems are difficult, complex, or unusual to support BC Hydro’s management of engineering risk.

Important Notes

Prior to commencement on assignment, the selected candidate must have their own sole practitioner, or the use of their firm’s, Permit to Practice with EGBC.

BC Registrants provided to BC Hydro through this assignment shall work under BC Hydro’s Professional Practice Management Plan, Quality Management Pillar. The Registrant shall apply their own or their firm’s Permit to Practice Number to work that is Sealed by the Registrant. Retention and preservation of all project documentation produced by the Registrant during their contract with BC Hydro will be retained by BC Hydro to satisfy EGBC Bylaws.

Education and Skills

•University graduate in applied science or engineering

•Registered Professional Engineer (P.Eng.) or Professional Geoscientist (P.Geo.) with Engineers & Geoscientists BC or with another jurisdiction and eligible for registration as such with Engineers & Geoscientists BC

•BC Hydro uses a Digital Sign and Seal Technology. You may be required to subscribe to a digital seal technology service offered by Notarius

•Familiarity with CAD systems and drawing standards

•Ability to use standard industry design/analysis software

Intermediate MS Office skills (Word, Excel, and PowerPoint)

Intermediate English skills for professional environment, written and spoken

Must Haves

P.eng & valid P2P
Class 5 driver's license
Basic First Aid certification

Nice to Haves

Automation and SCADA experience
Any NERC related experience
Previous utility experience

Additional Experience and Role Accountabilities

This role requires experience with the design, configuration, testing and troubleshooting of SCADA systems in electrical utility substations with operating voltages from 12kV to 500kV. Demonstrated experience working with utility SCADA systems design, including the design, configuration, testing, and maintenance of GE RTU products (i.e. GE D400, D20, D200, D25, IBOX), Ethernet networks, DNP3 protocol, Modbus Plus® protocol, and protocol test equipment and software and other similar systems used in electrical utility substations.

The work is focused on SCADA systems used in transmission stations with operating voltages from 12kV to 500kV.

Prepare project documentation and deliverables in accordance with BC Hydro project and Engineering Design Practices (i.e. evaluation reports, specifications, proposals, estimates, design basis', calculations, hazard logs, test plans).

Prepare design work packages including scope, duration, and level of effort estimates.

Prepare signed/sealed engineering deliverables as a Professional of Record (PoR) in accordance with EGBC and BC Hydro Design Practices.

Provide technical assistance and construction support in the field, and undertake field reviews as required by EGBC.

Prepare detailed SCADA design packages, device point assignments, and configurations.

Configuring/program RTUs, gateway devices, user interfaces, network switches/routers, and other IEDs related to the SCADA systems.

Specify and procure materials, panel assemblies and other related equipment.

Test and validate device configurations in a lab environment.

Prepare and execute pre-commissioning test plans for SCADA systems.

Provide technical guidance and support throughout the design process (cross-discipline integration, factory testing, installation, commissioning).

Provide training for end-users and peers on the theory and operational use of the installed or modified equipment/systems.

Duties

The P&C Engineering SCADA Design Team provides engineering expertise and support to high voltage transmission substations, generating stations and distribution facilities. Our team also provides project management, design, maintenance and emergency response services to the company and selected external clients. The successful candidate will be part of the SCADA design team delivering complex, multi-discipline capital projects for BC Hydro.

Duties will primarily be focused on delivering capital work involving integration of remote monitoring and control equipment of the power system. Providing design, development and testing of equipment used in substations, generating stations and the distribution system
Undertakes a variety of engineering assignments and is responsible for a project or part of a project. providing instructions, advice, and technical leadership, including reviewing work and ensuring compliance with standards and procedures; interacting with external service providers and reviewing designs for compliance with BC Hydro standards & practices
Uses initiative and judgment to develop innovative engineering techniques and applies theoretical and practical knowledge in the analysis and resolution of problems. Discusses unusual problems with senior engineers or the supervisor.
Maintain strong constructive relationships with internal and external clients and across the organization also including external service providers, contractors and suppliers as required.
Works under general supervision, with work assigned in terms of specific objectives.
Reviews overall plans and provides guidance for unusual features.
Completed work is normally accepted as technically accurate and is reviewed for feasibility and soundness of judgment.
Checks work and provides guidance to assigned staff.

Apply About employer

More about this job

Responsibilities

Design, configure, test, and troubleshoot SCADA systems and related equipment for substations, generating stations, and distribution facilities. Prepare and seal engineering deliverables, support field reviews and commissioning, coordinate with project stakeholders, and provide technical guidance and training.

Requirements

Requires a university degree in applied science or engineering, at least four years of relevant experience, and registration as a Professional Engineer or eligibility for registration with Engineers and Geoscientists BC. Must have a valid Permit to Practice, a Class 5 driver's license, and Basic First Aid certification; utility SCADA experience with RTUs, networks, and communications protocols is also required.

Skills

SCADA Systems Design
Electrical Utility Substations
GE RTU Configuration
Ethernet Networks
DNP3 Protocol
Modbus Plus Protocol
RTU Programming
Network Switches And Routers
IED Configuration
SCADA Testing And Troubleshooting
Pre-commissioning
Engineering Design
Construction Support
CAD Systems
Technical Leadership
Project Documentation

Visa sponsorship

Not detected in the job text

Keywords

Electrical Engineering
Protection And Control
SCADA
Power Systems
Transmission Substations
Generating Stations
Distribution Facilities
GE D400
GE D20
GE D200
GE D25
GE IBOX
Remote Terminal Units
Ethernet Networks
DNP3
Modbus Plus
Protocol Test Equipment
IEDs
CAD
Engineering Design Practices
Professional Of Record
Permit To Practice
EGBC
Digital Sign And Seal
Factory Testing
Commissioning
Field Reviews
NERC
Project Estimates
Hazard Logs

Report this job