Find work in Canada.

347,575 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 18 mins ago
N
Lead QA Test Engineer
Nasdaq
Toronto, ON
- Full-time
As a Lead QA Test Engineer, you'll play a critical role in ensuring the quality, reliability, and performance of Nasdaq's North American equities market systems - some of the most complex…
Added 40 mins ago
C
Electromechanical engineer
Constant
LaSalle, QC
- $80,000 to $80,001 CAD / year
- Full-time
- On-site
Set up and operate specialized and standard test equipment to diagnose, test and analyze the performance of electrical and electronic components, assemblies and systems
Added 1 hour ago
N
Co-op, Mechanical Engineer
Nutrien
Redwater, AB
- Internship
…background check, and may be required to undergo a substance test. While we appreciate all applications we receive, only candidates under consideration will be contacted. Applicants must…
Added 2 hours ago
A
Mechanical Test Engineer
Actalent
Vancouver, BC
- $48 to $57 CAD / hour
- Contract
The Mechanical Test Engineer is responsible for supporting new product development programs by delivering product design verification. This role requires close interaction with…
Added 2 hours ago
A
Hardware Engineer
Actalent
Maple Ridge, BC
- $38 to $48 CAD / hour
- Contract
We are seeking a Hardware Engineer to support an established portfolio of electronic products used in demanding industrial applications. The position is primarily focused on sustaining…
Added 2 hours ago
A
Senior Flight Software Engineer
Actalent
Brampton, ON
- $48 to $72 CAD / hour
- Contract
Design, implement, maintain, and test safety-critical, real-time flight software solutions that are modular, extendable, testable, and efficient. Lead complex subsystem designs and…
Added 3 hours ago
I
Network Engineer
Imani-Health
Field, BC
- Contract
Imani Health is looking for a skilled Network Engineer to support the deployment of our offline hospital system across partner hospitals and clinics.
Added 3 hours ago
NS
Group Services Labourer - Skilled Labourer (Hands-On Training Provided)
Northern Strands
Saskatoon, SK
- Full-time
Successful completion of a pre-employment drug test will be required as a condition of employment.
Added 3 hours ago
AM
IOHUB Design Verification Engineer
Advanced Micro Devices, Inc
Markham, ON
- Full-time
Develop the IOHUB test plan, implement DRVR, and drive verification closure.
Added 3 hours ago
AM
RTL Design Engineer
Advanced Micro Devices, Inc
Markham, ON
- Full-time
We are seeking a highly motivated RTL IP Design Engineer to join AMD's Security IP (SECIP) Design team. The team is responsible for the architecture, design, and verification of a broad…
Added 3 hours ago
AM
RTL Design Engineer
Advanced Micro Devices, Inc
Markham, ON
- Full-time
A talented hardware RTL design engineer with strong records of technical ownership and execution to drive block level IP and/or MP subsystems design and associated verification assignments…
Added 4 hours ago
DI
Jr. Mechanical Engineer
Draganfly Inc.
Burnaby, BC
- $65,000 to $85,000 CAD / year
- Full-time
The Jr. Mechanical Engineer will support the design, prototyping, testing, and documentation of mechanical parts and systems. Working under the direction of senior engineers, this role…
Added 4 hours ago
V
Lead Software Engineer
Virtusa
Toronto, ON
- Full-time
Testing & UAT: Formulate test scenarios, support user acceptance testing, and manage defect resolution
Added 4 hours ago
V
Lead Software Engineer
Virtusa
Toronto, ON
- Full-time
Document test cases, test results, and defects in a clear and concise manner.
Added 5 hours ago
HT
Designer, Development (Service)
Husky Technologies
Bolton, ON
- Full-time
The service team is currently seeking a Mechanical engineer/designer to specialize in resolving service issues.
Added 5 hours ago
HT
Product Development Engineer
Husky Technologies
Bolton, ON
- Full-time
Our Development Engineering team is looking to hire an experienced Product Development Engineer. The successful candidate will lead the technical development of packaging products working…
Added 6 hours ago
V
Java Developer
Virtusa
Mississauga, ON
- Full-time
We are seeking a highly skilled Senior Java Engineer to design, develop, and maintain
Added 7 hours ago
V
Lead Software Engineer
Virtusa
Mississauga, ON
- Full-time
Experience: 8+ years of hands-on experience in software quality assurance, with a significant focus on test automation and SDET roles.
Added 7 hours ago
FM
Industrial Mechanic/Millwright Journeyperson (Site Based)
Fortis Mining Engineering & Manufacturing
Saskatoon, SK
- Full-time
Successful completion of a pre-employment drug test will be required as a condition of employment.
Added 7 hours ago
V
Senior Software Engineer
Virtusa
Toronto, ON
- Full-time
Develop and execute test scripts using Python, Java, or JavaScript, while writing comprehensive test plans and defining the scope for complex projects.
Added 7 hours ago
V
Lead Software Engineer
Virtusa
Toronto, ON
- Full-time
Job Summary: We are seeking a highly skilled QA Automation Engineer with 7-10 years of experience to join our dynamic team in Toronto. The ideal candidate will play a crucial role in…
Added 7 hours ago
V
Lead Software Engineer
Virtusa
Toronto, ON
- Full-time
Job Summary: We are seeking a highly skilled QA Automation Engineer with 7-10 years of experience to join our dynamic team in Toronto. The ideal candidate will play a crucial role in…
Added 7 hours ago
FM
Ironworker (Site-Based)
Fortis Mining Engineering & Manufacturing
Saskatoon, SK
- Full-time
Successful completion of a pre-employment drug test will be required as a condition of employment.
Added 7 hours ago
FM
Welder Lead Hand
Fortis Mining Engineering & Manufacturing
Saskatoon, SK
- Full-time
Successful completion of a pre-employment drug test will be required as a condition of employment.
Added 7 hours ago
AI
Applications Engineering Manager, Nuclear
ATS Industrial Automation
Cambridge, ON
- Full-time
…design, build and service mission-critical automated assembly and test solutions for mobility, nuclear and specialty automation. Our customers are leaders in their industries and rely on us…

Morson Edge

Electrical Engineer

Burnaby, BC, Canada

$60 to $75 CAD / hour · Contract

Apply About employer

Applications open in a new tab.

Job details

Pay: $60 to $75 CAD / hour
Job type: Contract
Apply by: Nov 8, 2026
Posting language: English
Posted: Oct 9, 2026

Original job description

Role: E3 Electrical Engineer – P&C / SCADA Systems Design Team

Location: Burnaby, BC - Edmonds Office, Burnaby or Travel to substations as required

Duration: November 2, 2026 - November 2, 2027

Max T4 Rate: $62.67/

Max INC Rate: $75.80/

General Description

The E3 – Engineer is a fully qualified and accredited engineering professional who applies theoretical and practical knowledge to provide engineering design, estimating, planning, and quality management services for low to medium complexity projects and/or operations safely, with quality, within budget, and on time.

Experience and Role Accountabilities

A minimum four (4) years of in a relevant engineering field or equivalent.

Develop safe engineering solutions by using initiative and judgement to perform activities such as developing designs, analyzing and resolving problems, and interpreting engineering specifications on low to medium complexity assignments for projects and/or operations.

Assist project or operations management to meet safety, cost, quality, and time objectives by performing activities such as proposing changes in plans and estimated costs, recommending payment for work completed by contractors, preparing progress reports, coordinating work schedules and other similar tasks.

Participate in BC Hydro’s engineering practice by conducting independent studies and analysis, exercising judgment in selecting and interpreting information, recommending safe engineering designs, and making typical decisions related to standard methods and designs so that BC Hydro’s engineering standards are maintained.

Perform periodic tasks independently which may include on-site construction quality control and monitoring to ensure design compliance.

Engage with BC Hydro’s senior engineering team where engineering problems are difficult, complex, or unusual to support BC Hydro’s management of engineering risk.

Important Notes

Prior to commencement on assignment, the selected candidate must have their own sole practitioner, or the use of their firm’s, Permit to Practice with EGBC.

BC Registrants provided to BC Hydro through this assignment shall work under BC Hydro’s Professional Practice Management Plan, Quality Management Pillar. The Registrant shall apply their own or their firm’s Permit to Practice Number to work that is Sealed by the Registrant. Retention and preservation of all project documentation produced by the Registrant during their contract with BC Hydro will be retained by BC Hydro to satisfy EGBC Bylaws.

Education and Skills

•University graduate in applied science or engineering

•Registered Professional Engineer (P.Eng.) or Professional Geoscientist (P.Geo.) with Engineers & Geoscientists BC or with another jurisdiction and eligible for registration as such with Engineers & Geoscientists BC

•BC Hydro uses a Digital Sign and Seal Technology. You may be required to subscribe to a digital seal technology service offered by Notarius

•Familiarity with CAD systems and drawing standards

•Ability to use standard industry design/analysis software

Intermediate MS Office skills (Word, Excel, and PowerPoint)

Intermediate English skills for professional environment, written and spoken

Must Haves

P.eng & valid P2P
Class 5 driver's license
Basic First Aid certification

Nice to Haves

Automation and SCADA experience
Any NERC related experience
Previous utility experience

Additional Experience and Role Accountabilities

This role requires experience with the design, configuration, testing and troubleshooting of SCADA systems in electrical utility substations with operating voltages from 12kV to 500kV. Demonstrated experience working with utility SCADA systems design, including the design, configuration, testing, and maintenance of GE RTU products (i.e. GE D400, D20, D200, D25, IBOX), Ethernet networks, DNP3 protocol, Modbus Plus® protocol, and protocol test equipment and software and other similar systems used in electrical utility substations.

The work is focused on SCADA systems used in transmission stations with operating voltages from 12kV to 500kV.

Prepare project documentation and deliverables in accordance with BC Hydro project and Engineering Design Practices (i.e. evaluation reports, specifications, proposals, estimates, design basis', calculations, hazard logs, test plans).

Prepare design work packages including scope, duration, and level of effort estimates.

Prepare signed/sealed engineering deliverables as a Professional of Record (PoR) in accordance with EGBC and BC Hydro Design Practices.

Provide technical assistance and construction support in the field, and undertake field reviews as required by EGBC.

Prepare detailed SCADA design packages, device point assignments, and configurations.

Configuring/program RTUs, gateway devices, user interfaces, network switches/routers, and other IEDs related to the SCADA systems.

Specify and procure materials, panel assemblies and other related equipment.

Test and validate device configurations in a lab environment.

Prepare and execute pre-commissioning test plans for SCADA systems.

Provide technical guidance and support throughout the design process (cross-discipline integration, factory testing, installation, commissioning).

Provide training for end-users and peers on the theory and operational use of the installed or modified equipment/systems.

Duties

The P&C Engineering SCADA Design Team provides engineering expertise and support to high voltage transmission substations, generating stations and distribution facilities. Our team also provides project management, design, maintenance and emergency response services to the company and selected external clients. The successful candidate will be part of the SCADA design team delivering complex, multi-discipline capital projects for BC Hydro.

Duties will primarily be focused on delivering capital work involving integration of remote monitoring and control equipment of the power system. Providing design, development and testing of equipment used in substations, generating stations and the distribution system
Undertakes a variety of engineering assignments and is responsible for a project or part of a project. providing instructions, advice, and technical leadership, including reviewing work and ensuring compliance with standards and procedures; interacting with external service providers and reviewing designs for compliance with BC Hydro standards & practices
Uses initiative and judgment to develop innovative engineering techniques and applies theoretical and practical knowledge in the analysis and resolution of problems. Discusses unusual problems with senior engineers or the supervisor.
Maintain strong constructive relationships with internal and external clients and across the organization also including external service providers, contractors and suppliers as required.
Works under general supervision, with work assigned in terms of specific objectives.
Reviews overall plans and provides guidance for unusual features.
Completed work is normally accepted as technically accurate and is reviewed for feasibility and soundness of judgment.
Checks work and provides guidance to assigned staff.

Apply About employer

More about this job

Responsibilities

Design, configure, test, and troubleshoot SCADA systems and related equipment for substations, generating stations, and distribution facilities. Prepare and seal engineering deliverables, support field reviews and commissioning, coordinate with project stakeholders, and provide technical guidance and training.

Requirements

Requires a university degree in applied science or engineering, at least four years of relevant experience, and registration as a Professional Engineer or eligibility for registration with Engineers and Geoscientists BC. Must have a valid Permit to Practice, a Class 5 driver's license, and Basic First Aid certification; utility SCADA experience with RTUs, networks, and communications protocols is also required.

Skills

SCADA Systems Design
Electrical Utility Substations
GE RTU Configuration
Ethernet Networks
DNP3 Protocol
Modbus Plus Protocol
RTU Programming
Network Switches And Routers
IED Configuration
SCADA Testing And Troubleshooting
Pre-commissioning
Engineering Design
Construction Support
CAD Systems
Technical Leadership
Project Documentation

Visa sponsorship

Not detected in the job text

Keywords

Electrical Engineering
Protection And Control
SCADA
Power Systems
Transmission Substations
Generating Stations
Distribution Facilities
GE D400
GE D20
GE D200
GE D25
GE IBOX
Remote Terminal Units
Ethernet Networks
DNP3
Modbus Plus
Protocol Test Equipment
IEDs
CAD
Engineering Design Practices
Professional Of Record
Permit To Practice
EGBC
Digital Sign And Seal
Factory Testing
Commissioning
Field Reviews
NERC
Project Estimates
Hazard Logs

Report this job