Find work in Canada.

323,948 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 1 min ago
SS
Director of Wellness
Sienna Senior Living
Alliston, ON
- Full-time
Reporting to the General Manager, the Director of Wellness will lead a clinical team to provide care support and services.
Added 1 min ago
ME
General Manager, Vancouver Flagship
Mountain Equipment Company
Vancouver, BC
- $110,000 to $145,000 CAD / year
As General Manager, Vancouver Flagship, you will lead the overall performance, culture, and evolution of this highly visible location. You will set a clear direction for the store, build…
Added 1 min ago
EI
Co-op, Business Strategy and Growth
Enedym Inc
Hamilton, ON
- Up to $21 CAD / hour
Enedym - Business Strategy, Sales & AI Lead Generation Co-op
Added 1 min ago
Associate, Activation
WPP Media
Toronto, ON
Lead Optimistically by Championing Growth and Development to Mobilize the Enterprise.
Added 1 min ago
HT
Senior Director, Marketing and Communications
Holy Trinity School
Richmond Hill, ON
- Full-time
Lead the marketing strategy for the Summer Program in close collaboration with the Camp Director, Summer School Principal and the Executive Director, Enrolment Management and Strategic…
Added 1 min ago
CC
Senior Manager, Salesforce Platform Architecture & Development
Canadian Cancer Society
Toronto, ON · Montreal, QC · Quebec, QC · Prince George, BC · Vancouver, BC · Kelowna, BC · Halifax, NS · St. John's, NL · Calgary, AB
- Full-time
We are seeking a Senior Manager, Solution and Platform Architecture to lead the design, evolution, and operational excellence of our enterprise Salesforce ecosystem. This is a high-impact…
Added 1 min ago
R
Chef d'équipe, chaîne d'approvisionnement / Team Lead, Supply Chain
RTX
Longueuil, QC
- Full-time
Added 1 min ago
TT
Retail Store Coordinator Full time Winners-Parkway Place
The TJX Companies, Inc.
Peterborough, ON
- Full-time
We’re looking for a Retail Store Coordinator to join our team in a welcoming environment. In this role, you’ll lead and inspire to deliver outstanding customer experiences. If you thrive in…
Added 1 min ago
IC
Continuous Improvement Leader
IMT CORPORATION
ON
- $98,400 to $147,600 CAD / year
- Full-time
Reporting directly to the Vice President of Operations, this position will lead the facility’s Continuous Improvement and Operational Excellence strategy, develop and sustain effective…
Added 1 min ago
CC
Senior Risk Analyst
Canadian Commercial Corporation
Ottawa, ON
- $100,589 to $115,428 CAD / year
- Full-time
Lead or participate on projects and working groups, provide input and advice, and undertake research and information gathering to inform decisions
Added 1 min ago
Y
Early Childhood Educator
YBC
Vancouver, BC
- Up to $31.56 CAD / hour
- Full-time
- Contract
…adhering to the YMCA Playing to Learn curriculum, they design, and lead activities tailored to the interests and developmental stages of the children in their care. These educators also…
Added 1 min ago
Y
School Age Leader, Float
YBC
Burnaby, BC · Vancouver, BC
- Up to $23.14 CAD / hour
- Part-time
- Contract
Design and lead engaging indoor and outdoor activities that promote learning, wellness, and inclusion
Added 1 min ago
Y
School Age Leader
YBC
Surrey, BC
- Up to $23.14 CAD / hour
- Part-time
- Contract
Design and lead engaging indoor and outdoor activities that promote learning, wellness, and inclusion
Added 1 min ago
Y
School Age Leader, Support & Inclusion
YBC
Vancouver, BC
- Up to $23.14 CAD / hour
- Part-time
Design and lead indoor and outdoor activities that engage children of all abilities and backgrounds.
Added 1 min ago
Y
School Age Leader
YBC
Vancouver, British Columbia
- Up to $23.14 CAD / hour
- Part-time
Design and lead engaging indoor and outdoor activities that promote learning, wellness, and inclusion
Added 1 min ago
Y
School Age Leader, Support & Inclusion
YBC
Richmond, BC
- Up to $23.14 CAD / hour
- Part-time
Design and lead indoor and outdoor activities that engage children of all abilities and backgrounds.
Added 1 min ago
Y
School Age Leader, Support & Inclusion
YBC
Richmond, BC
- Up to $23.14 CAD / hour
- Part-time
- Contract
Design and lead indoor and outdoor activities that engage children of all abilities and backgrounds.
Added 1 min ago
Y
School Age Leader, Support & Inclusion
YBC
Surrey, BC
- Up to $23.14 CAD / hour
- Part-time
Design and lead indoor and outdoor activities that engage children of all abilities and backgrounds.
Added 1 min ago
HF
Mental Health Worker
Hollyburn Family Services Ltd.
Burnaby, BC
- $28.3 to $29 CAD / hour
- Full-time
At Hollyburn Family Services, we serve, nurture, honor, and lead by providing compassionate, evidence-based care to children, youth, and families across British Columbia. As a Great Place…
Added 1 min ago
BB
Director of Engineering & Technical
Britespan Building Systems Inc
Kitchener, ON
- $140,000 to $160,000 CAD / year
- Full-time
At Britespan Building Systems, we’re growing, and we’re looking for a Director of Engineering & Technical Services to help lead that growth.
Added 1 min ago
TS
Facility Partnerships Representative
Texas Sports Academy Main
Remote, Canada
- Contract
- Remote
Follow-Up: Run a consistent follow-up cadence by email and phone so no lead goes cold.
Added 1 min ago
VC
Program Coordinator, Hospice Services - Full-time
VON Canada (Ontario)
Whitby, ON
- $24.18 to $25.69 CAD / hour
- Full-time
Manages volunteers and staff within the program, taking the lead in orientation of program resources, training and in-services within the framework of VON Quality Management standards.
Added 1 min ago
M
Sales Executive
MediaRadar
Remote, Canada
- Remote
Added 1 min ago
FG
Key Account Manager (GTA) - Walmart
Freudenberg Group
Canada
- Full-time
Lead pricing, promotion, merchandising, distribution, and trade investment negotiations to support profitable growth and customer alignment.
Added 1 min ago
FB
Senior Manager, Financial Reporting
Fairstone Bank
Montreal, QC
- Full-time
Lead and oversee the monthly, quarterly, and annual financial close process, including the review and approval of journal entries and key accounting adjustments.

Closed listing

Percucision

Electronic Hardware Engineer

Greater Montreal Metropolitan Area, QC, Canada

Full-time

This opening has closed.

The original listing is kept below for reference.

Find open jobs More jobs with this employer

About employer

Job details

Job type: Full-time
Closing date: Nov 4, 2026
Experience: Ideally 1–5 years of relevant electronics, PCB, or embedded hardware experience.
Posting language: English
Posted: Oct 5, 2026

Similar jobs hiring now

Added 22 hours ago
Senior/Expert Hardware Design Engineer - FPGA
CS GROUP - Canada · Montreal, QC, Canada
Added 2 days ago
Senior Technical Lead
Scalian · Montreal, QC, Canada
Added 5 days ago
Electronics Engineering Contractor
MistyWest · Remote, Canada
Added 5 days ago
Développeur.se principal.e de l’infrastructure / Lead Infrastructure Developer
Electronic Arts · Montreal, QC, Canada

Search current openings

Original job description

Archived listing. The details below describe a past opening.

About Percucision

Percucision is a Montreal-based medical technology company developing a next-generation Class II medical device designed to improve how clinicians acquire and use physiological measurements at the point of care.

We are a small, fast-moving team working across mechanical, electrical, software, biomedical, and clinical development as we move our technology from prototype development toward design verification, regulatory submission, and commercialization.

We are looking for a full-time Hardware Engineer who wants to take meaningful ownership of the electronics and PCB architecture of our medical device. The role is centered on hardware design, board-level integration, sensor interfaces, bring-up, troubleshooting, and verification, with firmware used as a supporting tool for hardware development and validation.

Professional engineering licensure (P.Eng./ing.) or eligibility for membership with the Ordre des ingénieurs du Québec (OIQ) is strongly preferred.

The Role

This is a hands-on electronics and embedded hardware role with significant technical ownership.

You will help lead the design and development of the electronic hardware inside our medical device, from system architecture, schematic capture, component selection, and PCB design through board bring-up, debugging, integration, and verification. Your work will include microcontrollers, power supplies, analog and digital signal chains, sensors, communication interfaces, connectors, and the supporting circuitry required to build a robust and manufacturable product.

A strong ability to read and interpret component and sensor datasheets is essential. You will be expected to translate specifications such as pinouts, timing requirements, electrical characteristics, power needs, communication protocols, calibration requirements, and environmental limits into practical hardware design decisions and validation plans.

You will also work with embedded firmware when needed for board bring-up, sensor configuration, data acquisition, and troubleshooting, but the primary emphasis of this role is hardware and PCB design.

As part of a lean engineering team, you will have visibility across the complete product and contribute to technical decisions that directly influence performance, reliability, manufacturability, verification, and regulatory readiness.

For candidates with professional engineering licensure, the role may also include greater responsibility for engineering review, technical oversight, and professional engineering activities within their area of expertise.

What You’ll Do

Own or contribute directly to electronic system architecture, schematic capture, component selection, PCB design/layout review, and prototype iterations.
Design and validate power regulation, analog and digital circuitry, sensor interfaces, microcontroller connections, communication buses, connectors, protection circuitry, and supporting electronics.
Perform detailed datasheet reviews and translate component requirements into practical circuit design, PCB, integration, and validation decisions.
Bring up and debug prototype PCBs using oscilloscopes, multimeters, logic analyzers, bench power supplies, debuggers, soldering/rework equipment, and other laboratory tools.
Integrate and validate sensors and embedded components, troubleshooting issues across electronics, wiring, firmware, mechanical integration, and test setups.
Use and modify embedded C/C++ firmware and Python tools as needed for board bring-up, sensor configuration, data acquisition, debugging, and automated testing.
Support design verification, engineering reviews, risk management, root-cause investigations, technical documentation, and traceability within a regulated medical-device development process.
Collaborate with mechanical, software, quality, regulatory, clinical, and manufacturing partners to move designs from prototype through verification and commercialization.

What We’re Looking For

Degree in Electrical Engineering, Electronics Engineering, or a closely related engineering discipline.
Ideally 1–5 years of relevant electronics, PCB, or embedded hardware experience. Recent graduates with a Master’s degree in Microelectronics, Embedded Systems, or a closely related field are also strongly encouraged to apply.
Hands-on experience with PCB and circuit design, including schematic capture, component selection, board bring-up, and hardware debugging; experience with Altium, KiCad, or similar tools is an asset.
Strong understanding of analog and digital electronics, power supplies, grounding, signal integrity, sensor interfaces, microcontrollers, and common communication protocols such as I²C, SPI, UART, USB, and BLE.
Excellent datasheet interpretation skills and the ability to turn component specifications into sound hardware design and test decisions.
Comfortable using oscilloscopes, multimeters, logic analyzers, debuggers, soldering/rework tools, and general electronics lab equipment.
Working knowledge of C/C++ and Python for hardware bring-up, sensor communication, testing, and debugging; deep application-software experience is not required.
Strong problem-solving, technical documentation, and multidisciplinary collaboration skills.
P.Eng./ing. and OIQ membership strongly preferred, or eligibility to obtain professional licensure.
Experience with medical devices, regulated products, or formal design-control environments is an asset.

Bonus

Experience in any of the following would be considered an asset:

Mixed-signal, analog front-end, or low-noise sensor circuit design
Low-power embedded hardware and battery-powered device design
PCB layout, design for manufacturability (DFM), design for test (DFT), and production handoff
EMC/EMI, ESD protection, grounding, shielding, and pre-compliance troubleshooting
STM32, nRF52, ARM Cortex, or similar microcontroller platforms
Bluetooth / BLE hardware integration and RF considerations
Physiological, biomedical, pressure, optical, or other precision sensor interfaces
Signal processing and sensor validation
Hardware-in-the-loop and automated hardware verification
RTOS-based embedded development or firmware debugging
Medical devices or other safety-critical / regulated products
IEC 60601 electrical safety / EMC concepts
ISO 13485 quality-management systems
ISO 14971 medical-device risk management
FDA 510(k) or Health Canada medical-device development environments
Previous responsibility for engineering design reviews or technical approval in a regulated environment

Why Percucision?

Build electronic hardware intended for clinical use in healthcare.
Take real ownership of PCB architecture, circuit design, sensor integration, board bring-up, and hardware verification.
Work across electronics, embedded systems, mechanical integration, testing, manufacturing, quality, and regulatory development.
Influence technical decisions directly within a small, multidisciplinary engineering team.
Contribute to engineering review, technical oversight, verification, and design decisions.
Help bring a medical device from prototype through commercialization.
Montreal-based with in-person collaboration.

We’re looking for someone who enjoys designing circuits, reading datasheets, building and debugging hardware, solving complex technical problems, and taking ownership of challenges from initial concept through validated implementation.

About employer

More about this job

Responsibilities

Design and develop electronic hardware for a medical device, including system architecture, schematics, component selection, PCB design, sensor integration, and prototype bring-up. Debug and verify hardware, use firmware and Python tools as needed, and collaborate across engineering, quality, regulatory, clinical, and manufacturing teams to support commercialization.

Requirements

A degree in Electrical Engineering, Electronics Engineering, or a closely related discipline is sought, along with ideally 1–5 years of relevant experience; recent graduates with a related master’s degree are also encouraged to apply. Candidates should have hands-on PCB and circuit design experience, strong electronics and datasheet skills, familiarity with lab equipment and embedded C/C++ and Python, and preferably P.Eng./ing. licensure or eligibility for OIQ membership.

Skills

PCB Design
Circuit Design
Hardware Bring-Up and Debugging
Analog and Digital Electronics
Sensor Interfaces
Microcontrollers
Power Supplies
Datasheet Interpretation
Embedded C/C++
Python
Hardware Verification
Signal Integrity
Communication Protocols
Design for Manufacturability
Medical Device Development
Technical Documentation

Visa sponsorship

Not detected in the job text

Keywords

Electronic Hardware
PCB Design
Schematic Capture
Component Selection
Altium
KiCad
Analog Electronics
Digital Electronics
Power Regulation
Signal Integrity
Sensor Interfaces
Microcontrollers
I²C
SPI
UART
USB
Bluetooth Low Energy
Embedded C/C++
Python
Oscilloscopes
Logic Analyzers
Board Bring-Up
Design Verification
Design for Manufacturability
EMC/EMI
IEC 60601
ISO 13485
ISO 14971
Medical Devices
OIQ

Report this job