Find work in Canada.

322,205 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 10 mins ago
H
Senior Test & Validation Engineer
Humanoid
Burnaby, BC
- Full-time
As a Senior Test and Validation Engineer at Humanoid, you will be responsible for bringing new hardware subsystems into a functional, controllable, measurable, and integration-ready state,…
Added 40 mins ago
VT
Warranty Engineer
Veridian Tech Solutions, Inc.
Markham, ON
- Other
The Warranty Engineer is responsible for overseeing the day-to-day warranty tickets, preparing reports, driving parts and cost related analysis.
Added 41 mins ago
Systems Engineer, Data Center Debug
Tenstorrent
Toronto, ON
Hands-on engineer who excels at diagnosing complex hardware, firmware, and software issues through root-cause analysis.
Added 1 hour ago
VT
Warranty Engineer
Veridian Tech Solutions, Inc.
Markham, ON
- Contract
The Warranty Engineer is responsible for overseeing the day-to-day warranty tickets, preparing reports, driving parts and cost related analysis.
Added 1 hour ago
PT
Warranty Engineer
Pentangle Tech Services | P5 Group
Markham, ON
- Contract
The Warranty Engineer is responsible for overseeing the day-to-day warranty tickets, preparing reports, driving parts and cost related analysis.
Added 1 hour ago
PT
Warranty Engineer
Pentangle Tech Services | P5 Group
Markham, ON
- Contract
The Warranty Engineer is responsible for overseeing the day-to-day warranty tickets, preparing reports, driving parts and cost related analysis.
Added 1 hour ago
AS
Intermediate Technical Support Engineer
Ardent SoftSol Inc.
Toronto, ON
- Contract
Position: Intermediate Technical Support Engineer
Added 1 hour ago
RE
Engineer (Physical AI)
Renesas Electronics
Ottawa, ON
- Full-time
We are seeking an entry level Engineer (Physical AI) to join the Pathfinding Studio within the Engineering Innovation Office. In this role, you will research and develop next generation…
Added 2 hours ago
MC
Principal Embedded Software Firmware Engineer (35837)
Myticas Consulting
Ottawa, ON
- Contract
Principal Embedded Software/Firmware Engineer
Added 2 hours ago
MC
FPGA Design & Validation Engineer – 4G 5G Radio (35952)
Myticas Consulting
Ottawa, ON
- Contract
FPGA Design & Validation Engineer – 4G/5G Radio Units
Added 2 hours ago
MC
Senior Mechanical Engineering Consultant (35428)
Myticas Consulting
Ottawa, ON · Kanata, ON
- Contract
Seeking an experienced Mechanical Engineer to provide onsite engineering support for the development of advanced hardware platforms and optical communication products. The consultant will…
Added 2 hours ago
MC
Network Engineer (35135)
Myticas Consulting
Ottawa, ON
- Full-time
We are looking for an experienced Network Service Engineer with strong expertise in customer network service configuration to support the design, implementation, and optimization of network…
Added 2 hours ago
MC
Senior ASIC Verification Engineer (35885)
Myticas Consulting
Ottawa, ON · Kanata, ON
- Full-time
…cross-functional engineering teams to deliver high-quality silicon and hardware…
Added 2 hours ago
MC
Coherent Optical Systems Engineer (35886)
Myticas Consulting
Ottawa, ON · Kanata, ON
- Full-time
We are seeking a Coherent Optical Systems Engineer to contribute to the design, development, characterization, and optimization of advanced coherent optical transceivers based on…
Added 2 hours ago
KC
Senior Embedded Software Designer
Kepler Communications Inc.
Toronto, ON
- Full-time
We're on the hunt for a top-tier Senior Embedded Software Engineer. Your focus will be on software development and maintenance required for both space and ground-based assets for a growing…
Added 2 hours ago
A
Senior Software Engineer - GPU Profiling Tools
AMD
Markham, ON
- $132,000 to $198,000 USD / year
- Full-time
AMD is looking for a Senior Software Engineer - GPU Profiling Tools for the Developer Tools team, where you will contribute to the development and optimization of GPU profiling tools for…
Added 2 hours ago
TT
Warranty Engineer
Tata Technologies
Markham, ON
- Full-time
The Warranty Engineer is responsible for overseeing the day-to-day warranty tickets, preparing reports, driving parts and cost related analysis.
Added 2 hours ago
EI
Mechanical Test Engineer / Test Technician
ExcelGens, Inc.
Mississauga, ON
- Contract
We are seeking a Mechanical Test Engineer / Test Technician with a Mechanical Engineering or Mechatronics background to support testing and validation of mobile computing products and…
Added 2 hours ago
T
Software Engineer III
TD
Toronto, ON
- Full-time
Added 2 hours ago
MI
Mould Maker
Magna International
Tecumseh, ON
- Full-time
…systems. Our solution includes seating structures, mechanisms and hardware, as well as foam and trim products for global automotive, heavy truck and bus industries. Our capabilities include…
Added 3 hours ago
A
Software Development Engineer In Test
Actalent
Waterloo, ON
- $40 to $50 CAD / hour
- Contract
This Software Development Engineer in Test (SDET) role focuses on designing, developing, and maintaining automated test scripts and tools in Python to validate new features for advanced…
Added 3 hours ago
A
Hardware Design Engineer (Open Interest)
Actalent
Ottawa, ON
- $45 to $65 CAD / hour
- Full-time
Hardware Design Engineer (Analog & Digital) Talent Network (Open Interest)
Added 3 hours ago
A
Design Verification Engineer
Actalent
Ottawa, ON
- $110,000 to $152,000 CAD / year
- Full-time
We are seeking a Design Verification Engineer to join an experienced R&D organization focused on developing networking switch and network controller IP cores that support advanced Time…
Added 3 hours ago
A
C++ Software Developer/Engineer Open Interest
Actalent
Ottawa, ON
- $45 to $65 CAD / hour
- Full-time
C++ Software Developer/Engineer Talent Network (Open Interest)
Added 3 hours ago
A
Systems Engineer (Open Interest)
Actalent
Ottawa, ON
- $45 to $65 CAD / hour
- Full-time
Are you a Systems Engineer interested in exploring new opportunities?

Percucision

Electronic Hardware Engineer

Greater Montreal Metropolitan Area, QC, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Nov 4, 2026
Experience: Ideally 1–5 years of relevant electronics, PCB, or embedded hardware experience.
Posting language: English
Posted: Oct 5, 2026

Original job description

About Percucision

Percucision is a Montreal-based medical technology company developing a next-generation Class II medical device designed to improve how clinicians acquire and use physiological measurements at the point of care.

We are a small, fast-moving team working across mechanical, electrical, software, biomedical, and clinical development as we move our technology from prototype development toward design verification, regulatory submission, and commercialization.

We are looking for a full-time Hardware Engineer who wants to take meaningful ownership of the electronics and PCB architecture of our medical device. The role is centered on hardware design, board-level integration, sensor interfaces, bring-up, troubleshooting, and verification, with firmware used as a supporting tool for hardware development and validation.

Professional engineering licensure (P.Eng./ing.) or eligibility for membership with the Ordre des ingénieurs du Québec (OIQ) is strongly preferred.

The Role

This is a hands-on electronics and embedded hardware role with significant technical ownership.

You will help lead the design and development of the electronic hardware inside our medical device, from system architecture, schematic capture, component selection, and PCB design through board bring-up, debugging, integration, and verification. Your work will include microcontrollers, power supplies, analog and digital signal chains, sensors, communication interfaces, connectors, and the supporting circuitry required to build a robust and manufacturable product.

A strong ability to read and interpret component and sensor datasheets is essential. You will be expected to translate specifications such as pinouts, timing requirements, electrical characteristics, power needs, communication protocols, calibration requirements, and environmental limits into practical hardware design decisions and validation plans.

You will also work with embedded firmware when needed for board bring-up, sensor configuration, data acquisition, and troubleshooting, but the primary emphasis of this role is hardware and PCB design.

As part of a lean engineering team, you will have visibility across the complete product and contribute to technical decisions that directly influence performance, reliability, manufacturability, verification, and regulatory readiness.

For candidates with professional engineering licensure, the role may also include greater responsibility for engineering review, technical oversight, and professional engineering activities within their area of expertise.

What You’ll Do

Own or contribute directly to electronic system architecture, schematic capture, component selection, PCB design/layout review, and prototype iterations.
Design and validate power regulation, analog and digital circuitry, sensor interfaces, microcontroller connections, communication buses, connectors, protection circuitry, and supporting electronics.
Perform detailed datasheet reviews and translate component requirements into practical circuit design, PCB, integration, and validation decisions.
Bring up and debug prototype PCBs using oscilloscopes, multimeters, logic analyzers, bench power supplies, debuggers, soldering/rework equipment, and other laboratory tools.
Integrate and validate sensors and embedded components, troubleshooting issues across electronics, wiring, firmware, mechanical integration, and test setups.
Use and modify embedded C/C++ firmware and Python tools as needed for board bring-up, sensor configuration, data acquisition, debugging, and automated testing.
Support design verification, engineering reviews, risk management, root-cause investigations, technical documentation, and traceability within a regulated medical-device development process.
Collaborate with mechanical, software, quality, regulatory, clinical, and manufacturing partners to move designs from prototype through verification and commercialization.

What We’re Looking For

Degree in Electrical Engineering, Electronics Engineering, or a closely related engineering discipline.
Ideally 1–5 years of relevant electronics, PCB, or embedded hardware experience. Recent graduates with a Master’s degree in Microelectronics, Embedded Systems, or a closely related field are also strongly encouraged to apply.
Hands-on experience with PCB and circuit design, including schematic capture, component selection, board bring-up, and hardware debugging; experience with Altium, KiCad, or similar tools is an asset.
Strong understanding of analog and digital electronics, power supplies, grounding, signal integrity, sensor interfaces, microcontrollers, and common communication protocols such as I²C, SPI, UART, USB, and BLE.
Excellent datasheet interpretation skills and the ability to turn component specifications into sound hardware design and test decisions.
Comfortable using oscilloscopes, multimeters, logic analyzers, debuggers, soldering/rework tools, and general electronics lab equipment.
Working knowledge of C/C++ and Python for hardware bring-up, sensor communication, testing, and debugging; deep application-software experience is not required.
Strong problem-solving, technical documentation, and multidisciplinary collaboration skills.
P.Eng./ing. and OIQ membership strongly preferred, or eligibility to obtain professional licensure.
Experience with medical devices, regulated products, or formal design-control environments is an asset.

Bonus

Experience in any of the following would be considered an asset:

Mixed-signal, analog front-end, or low-noise sensor circuit design
Low-power embedded hardware and battery-powered device design
PCB layout, design for manufacturability (DFM), design for test (DFT), and production handoff
EMC/EMI, ESD protection, grounding, shielding, and pre-compliance troubleshooting
STM32, nRF52, ARM Cortex, or similar microcontroller platforms
Bluetooth / BLE hardware integration and RF considerations
Physiological, biomedical, pressure, optical, or other precision sensor interfaces
Signal processing and sensor validation
Hardware-in-the-loop and automated hardware verification
RTOS-based embedded development or firmware debugging
Medical devices or other safety-critical / regulated products
IEC 60601 electrical safety / EMC concepts
ISO 13485 quality-management systems
ISO 14971 medical-device risk management
FDA 510(k) or Health Canada medical-device development environments
Previous responsibility for engineering design reviews or technical approval in a regulated environment

Why Percucision?

Build electronic hardware intended for clinical use in healthcare.
Take real ownership of PCB architecture, circuit design, sensor integration, board bring-up, and hardware verification.
Work across electronics, embedded systems, mechanical integration, testing, manufacturing, quality, and regulatory development.
Influence technical decisions directly within a small, multidisciplinary engineering team.
Contribute to engineering review, technical oversight, verification, and design decisions.
Help bring a medical device from prototype through commercialization.
Montreal-based with in-person collaboration.

We’re looking for someone who enjoys designing circuits, reading datasheets, building and debugging hardware, solving complex technical problems, and taking ownership of challenges from initial concept through validated implementation.

Apply About employer

More about this job

Responsibilities

Design and develop electronic hardware for a medical device, including system architecture, schematics, component selection, PCB design, sensor integration, and prototype bring-up. Debug and verify hardware, use firmware and Python tools as needed, and collaborate across engineering, quality, regulatory, clinical, and manufacturing teams to support commercialization.

Requirements

A degree in Electrical Engineering, Electronics Engineering, or a closely related discipline is sought, along with ideally 1–5 years of relevant experience; recent graduates with a related master’s degree are also encouraged to apply. Candidates should have hands-on PCB and circuit design experience, strong electronics and datasheet skills, familiarity with lab equipment and embedded C/C++ and Python, and preferably P.Eng./ing. licensure or eligibility for OIQ membership.

Skills

PCB Design
Circuit Design
Hardware Bring-Up and Debugging
Analog and Digital Electronics
Sensor Interfaces
Microcontrollers
Power Supplies
Datasheet Interpretation
Embedded C/C++
Python
Hardware Verification
Signal Integrity
Communication Protocols
Design for Manufacturability
Medical Device Development
Technical Documentation

Visa sponsorship

Not detected in the job text

Keywords

Electronic Hardware
PCB Design
Schematic Capture
Component Selection
Altium
KiCad
Analog Electronics
Digital Electronics
Power Regulation
Signal Integrity
Sensor Interfaces
Microcontrollers
I²C
SPI
UART
USB
Bluetooth Low Energy
Embedded C/C++
Python
Oscilloscopes
Logic Analyzers
Board Bring-Up
Design Verification
Design for Manufacturability
EMC/EMI
IEC 60601
ISO 13485
ISO 14971
Medical Devices
OIQ

Report this job