Find work in Canada.

322,205 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 25 mins ago
A
Senior Project Engineer
ABB
Calgary, AB
- Full-time
ABB is seeking a Senior Lead Project Engineer to join our team. In this role, you will provide technical leadership and oversee the successful execution of multidisciplinary electrical…
Added 25 mins ago
H
Senior Test & Validation Engineer
Humanoid
Burnaby, BC
- Full-time
As a Senior Test and Validation Engineer at Humanoid, you will be responsible for bringing new hardware subsystems into a functional, controllable, measurable, and integration-ready state,…
Added 56 mins ago
KG
IAM Automation Engineer (Python & PingDS Focus)
K&K Global Talent Solutions INC.
Quebec, QC
- Full-time
Position: IAM Automation Engineer (Python & PingDS Focus)
Added 57 mins ago
H
CONOPS & Mission Analysis Systems Engineer | Remote Opportunity | Fastwater Staffing
HIKINEX
Remote, Canada
- Full-time
- Remote
We are seeking an experienced CONOPS & Mission Analysis Systems Engineer to lead mission planning, systems engineering, and operational analysis for advanced LEO and MEO satellite programs.…
Added 57 mins ago
Senior Instrumentation & Controls Engineer - Industrial Sector
Kiewit
Calgary, AB
Review OEM vendor packages for technical compliance and integration requirements.
Added 1 hour ago
S
Android Software Engineer
Semperis
Remote, Canada
- Full-time
- Remote
We're looking for an Android Software Engineer to join our team. As part of our growing team, you'll play a key role in protecting enterprises from cyber threats, while working with some of…
Added 1 hour ago
D
Principal Product Manager, Sandboxes
Docker
Remote, Canada
- Full-time
- Remote
…developer infrastructure, and prior experience as a software engineer. You will need to understand containers, sandboxes/microVMs, virtualization technologies, hypervisors, the software…
Added 1 hour ago
DT
Senior Power Electronics Engineer
Delta-Q Technologies
Vancouver, BC
- Full-time
We have an exciting opportunity for a Senior Power Electronics Engineer with deep expertise in switched-mode power conversion, feedback control systems, and battery charging applications.
Added 1 hour ago
AI
JAMS Platform Engineer
Apptoza Inc.
Toronto, ON
- Contract
Seeking a hands-on engineer to drive the reliability| automation and modernization of the enterprise JAMS workload automation platform. The role combines JAMS platform expertise with…
Added 1 hour ago
Senior Platform Engineer, AI & Fabrics
BMO
Toronto, ON · FCP
You are a hands-on engineer with a strong production track record who takes ownership of your components, cares about operability and correctness, and collaborates well within your team.…
Added 1 hour ago
B
Senior Manager, Data & AI
BDO
Vancouver, BC
- Full-time
…including architecture reviews, solution design, data modelling, integration patterns, governance approaches, and complex delivery issue…
Added 1 hour ago
A
Americas Signaling Leader
Arup
Toronto, ON
- Full-time
…planning, design, delivery, construction phase support, systems integration, assurance, safety and security assessments, performance modelling, and optimization of railway operations and…
Added 1 hour ago
Senior Electrical Engineer
Cyclic Materials Inc.
Toronto, ON
We are seeking an experienced Senior Electrical Engineer to lead and support electrical engineering efforts for our recycling operations. Reporting to the SME Electrical Engineering, you…
Added 2 hours ago
MC
Program Chief Engineer – Spacecraft Satellite Systems (35863)
Myticas Consulting
Canada
- Full-time
Program Chief Engineer – Spacecraft / Satellite Systems
Added 2 hours ago
CM
Senior Electrical Engineer
Cyclic Materials
Toronto, ON
- Full-time
We are seeking an experienced Senior Electrical Engineer to lead and support electrical engineering efforts for our recycling operations. Reporting to the SME Electrical Engineering, you…
Added 2 hours ago
MC
AI Platform Engineer (35577)
Myticas Consulting
Toronto, ON
- Contract
Strong API integration and development experience.
Added 2 hours ago
TT
HVAC engineer
Trane Technologies
Montreal, QC
- Full-time
…truly autonomous buildings. We’re looking for a Mechanical Engineer who brings deep knowledge of HVAC system design, commissioning, and field implementation - someone who understands how…
Added 2 hours ago
MC
Technical Consultant III (35732)
Myticas Consulting
Toronto, ON
- Full-time
Technical Consultant III (Software Engineer, Senior/Lead)
Added 2 hours ago
MC
Senior Data Engineer Azure Data Factory Developer (35968)
Myticas Consulting
Toronto, ON
- Contract
Our client is seeking two Senior Data professionals to support a data engineering and integration initiative: one Data Engineer specializing in Databricks and Apache Spark, and one Azure…
Added 2 hours ago
ES
Tosca QE
Epsilon Solutions Ltd.
Toronto, ON
- Contract
As a Quality Engineer you will plan and conduct a wide range of software quality tests and analyzes to ensure all application products and services meet organizational standards aligned to…
Added 2 hours ago
BC
Senior Manager, Data & AI
BDO Canada
Vancouver, BC
- Full-time
…including architecture reviews, solution design, data modelling, integration patterns, governance approaches, and complex delivery issue…
Added 2 hours ago
K
Senior AI Software Engineer, Agentic Systems & Data Fabric
Kinaxis
Ottawa, ON
- Full-time
…reason about and act on enterprise data. As a Senior AI Software Engineer on the Data Fabric team, you will design and implement execution patterns, tool-calling infrastructure, and runtime…
Added 2 hours ago
TH
Frontend Software Engineer (senior)
Teumo Health Technologies Inc.
Vancouver, BC
- Full-time
Role Description The Senior Frontend Software Engineer will design, develop, and maintain user-facing features for Teumo Health’s digital health platforms, ensuring responsive, accessible,…
Added 2 hours ago
B
Senior Platform Engineer, AI & Fabrics
BMO
Toronto, ON
- Part-time
You are a hands-on engineer with a strong production track record who takes ownership of your components, cares about operability and correctness, and collaborates well within your team.…
Added 2 hours ago
MI
Hemming Engineer
Magna International
Brampton, ON
- Full-time
· Work with and support dimensional, robot and shop floor departments with hem tool build, integration and commissioning.

Percucision

Electronic Hardware Engineer

Greater Montreal Metropolitan Area, QC, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Nov 4, 2026
Experience: Ideally 1–5 years of relevant electronics, PCB, or embedded hardware experience.
Posting language: English
Posted: Oct 5, 2026

Original job description

About Percucision

Percucision is a Montreal-based medical technology company developing a next-generation Class II medical device designed to improve how clinicians acquire and use physiological measurements at the point of care.

We are a small, fast-moving team working across mechanical, electrical, software, biomedical, and clinical development as we move our technology from prototype development toward design verification, regulatory submission, and commercialization.

We are looking for a full-time Hardware Engineer who wants to take meaningful ownership of the electronics and PCB architecture of our medical device. The role is centered on hardware design, board-level integration, sensor interfaces, bring-up, troubleshooting, and verification, with firmware used as a supporting tool for hardware development and validation.

Professional engineering licensure (P.Eng./ing.) or eligibility for membership with the Ordre des ingénieurs du Québec (OIQ) is strongly preferred.

The Role

This is a hands-on electronics and embedded hardware role with significant technical ownership.

You will help lead the design and development of the electronic hardware inside our medical device, from system architecture, schematic capture, component selection, and PCB design through board bring-up, debugging, integration, and verification. Your work will include microcontrollers, power supplies, analog and digital signal chains, sensors, communication interfaces, connectors, and the supporting circuitry required to build a robust and manufacturable product.

A strong ability to read and interpret component and sensor datasheets is essential. You will be expected to translate specifications such as pinouts, timing requirements, electrical characteristics, power needs, communication protocols, calibration requirements, and environmental limits into practical hardware design decisions and validation plans.

You will also work with embedded firmware when needed for board bring-up, sensor configuration, data acquisition, and troubleshooting, but the primary emphasis of this role is hardware and PCB design.

As part of a lean engineering team, you will have visibility across the complete product and contribute to technical decisions that directly influence performance, reliability, manufacturability, verification, and regulatory readiness.

For candidates with professional engineering licensure, the role may also include greater responsibility for engineering review, technical oversight, and professional engineering activities within their area of expertise.

What You’ll Do

Own or contribute directly to electronic system architecture, schematic capture, component selection, PCB design/layout review, and prototype iterations.
Design and validate power regulation, analog and digital circuitry, sensor interfaces, microcontroller connections, communication buses, connectors, protection circuitry, and supporting electronics.
Perform detailed datasheet reviews and translate component requirements into practical circuit design, PCB, integration, and validation decisions.
Bring up and debug prototype PCBs using oscilloscopes, multimeters, logic analyzers, bench power supplies, debuggers, soldering/rework equipment, and other laboratory tools.
Integrate and validate sensors and embedded components, troubleshooting issues across electronics, wiring, firmware, mechanical integration, and test setups.
Use and modify embedded C/C++ firmware and Python tools as needed for board bring-up, sensor configuration, data acquisition, debugging, and automated testing.
Support design verification, engineering reviews, risk management, root-cause investigations, technical documentation, and traceability within a regulated medical-device development process.
Collaborate with mechanical, software, quality, regulatory, clinical, and manufacturing partners to move designs from prototype through verification and commercialization.

What We’re Looking For

Degree in Electrical Engineering, Electronics Engineering, or a closely related engineering discipline.
Ideally 1–5 years of relevant electronics, PCB, or embedded hardware experience. Recent graduates with a Master’s degree in Microelectronics, Embedded Systems, or a closely related field are also strongly encouraged to apply.
Hands-on experience with PCB and circuit design, including schematic capture, component selection, board bring-up, and hardware debugging; experience with Altium, KiCad, or similar tools is an asset.
Strong understanding of analog and digital electronics, power supplies, grounding, signal integrity, sensor interfaces, microcontrollers, and common communication protocols such as I²C, SPI, UART, USB, and BLE.
Excellent datasheet interpretation skills and the ability to turn component specifications into sound hardware design and test decisions.
Comfortable using oscilloscopes, multimeters, logic analyzers, debuggers, soldering/rework tools, and general electronics lab equipment.
Working knowledge of C/C++ and Python for hardware bring-up, sensor communication, testing, and debugging; deep application-software experience is not required.
Strong problem-solving, technical documentation, and multidisciplinary collaboration skills.
P.Eng./ing. and OIQ membership strongly preferred, or eligibility to obtain professional licensure.
Experience with medical devices, regulated products, or formal design-control environments is an asset.

Bonus

Experience in any of the following would be considered an asset:

Mixed-signal, analog front-end, or low-noise sensor circuit design
Low-power embedded hardware and battery-powered device design
PCB layout, design for manufacturability (DFM), design for test (DFT), and production handoff
EMC/EMI, ESD protection, grounding, shielding, and pre-compliance troubleshooting
STM32, nRF52, ARM Cortex, or similar microcontroller platforms
Bluetooth / BLE hardware integration and RF considerations
Physiological, biomedical, pressure, optical, or other precision sensor interfaces
Signal processing and sensor validation
Hardware-in-the-loop and automated hardware verification
RTOS-based embedded development or firmware debugging
Medical devices or other safety-critical / regulated products
IEC 60601 electrical safety / EMC concepts
ISO 13485 quality-management systems
ISO 14971 medical-device risk management
FDA 510(k) or Health Canada medical-device development environments
Previous responsibility for engineering design reviews or technical approval in a regulated environment

Why Percucision?

Build electronic hardware intended for clinical use in healthcare.
Take real ownership of PCB architecture, circuit design, sensor integration, board bring-up, and hardware verification.
Work across electronics, embedded systems, mechanical integration, testing, manufacturing, quality, and regulatory development.
Influence technical decisions directly within a small, multidisciplinary engineering team.
Contribute to engineering review, technical oversight, verification, and design decisions.
Help bring a medical device from prototype through commercialization.
Montreal-based with in-person collaboration.

We’re looking for someone who enjoys designing circuits, reading datasheets, building and debugging hardware, solving complex technical problems, and taking ownership of challenges from initial concept through validated implementation.

Apply About employer

More about this job

Responsibilities

Design and develop electronic hardware for a medical device, including system architecture, schematics, component selection, PCB design, sensor integration, and prototype bring-up. Debug and verify hardware, use firmware and Python tools as needed, and collaborate across engineering, quality, regulatory, clinical, and manufacturing teams to support commercialization.

Requirements

A degree in Electrical Engineering, Electronics Engineering, or a closely related discipline is sought, along with ideally 1–5 years of relevant experience; recent graduates with a related master’s degree are also encouraged to apply. Candidates should have hands-on PCB and circuit design experience, strong electronics and datasheet skills, familiarity with lab equipment and embedded C/C++ and Python, and preferably P.Eng./ing. licensure or eligibility for OIQ membership.

Skills

PCB Design
Circuit Design
Hardware Bring-Up and Debugging
Analog and Digital Electronics
Sensor Interfaces
Microcontrollers
Power Supplies
Datasheet Interpretation
Embedded C/C++
Python
Hardware Verification
Signal Integrity
Communication Protocols
Design for Manufacturability
Medical Device Development
Technical Documentation

Visa sponsorship

Not detected in the job text

Keywords

Electronic Hardware
PCB Design
Schematic Capture
Component Selection
Altium
KiCad
Analog Electronics
Digital Electronics
Power Regulation
Signal Integrity
Sensor Interfaces
Microcontrollers
I²C
SPI
UART
USB
Bluetooth Low Energy
Embedded C/C++
Python
Oscilloscopes
Logic Analyzers
Board Bring-Up
Design Verification
Design for Manufacturability
EMC/EMI
IEC 60601
ISO 13485
ISO 14971
Medical Devices
OIQ

Report this job