Find work in Canada.

319,810 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 6 hours ago
RR
Hardware Test Engineer
Remote Robotic
Ottawa, ON · Kanata, ON
- $82,000 to $100,000 CAD / year
- Full-time
AirMetal is looking for a Test Engineer, FPV Electronics to develop the systems that validate the performance, reliability, and quality of our FPV and uncrewed-aircraft electronics.
Added 8 hours ago
Manager, CAPA
Velan Inc.
Montreal, QC
Defect Investigation: Lead root cause analysis (RCA) for valve assembly failures, pressure test leaks, and machining non-conformances using 5 Whys, Fishbone, and FMEA.
Added 8 hours ago
Specialist, CAPA
Velan Inc.
Montreal, QC
Defect Investigation: Lead root cause analysis (RCA) for valve assembly failures, pressure test leaks, casting porosities, and machining non-conformances using 5 Whys, Fishbone, and FMEA.
Added 10 hours ago
A
Hardware Engineer
Actalent
Ottawa, ON
- $55 to $65 CAD / hour
- Full-time
Troubleshoot, bring up, and optimize designs based on test results, lab findings, and field feedback.
Added 10 hours ago
A
Power Electronics Design Engineer
Actalent
Ottawa, ON
- $55 to $65 CAD / hour
- Full-time
Troubleshoot, bring up, and optimize designs based on test results, lab findings, and field feedback.
Added 12 hours ago
Mechanical Engineer Co-op
Moment Energy
Surrey, BC
We are seeking a Mechanical Engineering Co-op to join our Engineering team, starting in January. In this role, you will support the design, development, and testing of our battery energy…
Added 13 hours ago
H
Senior Test & Validation Engineer
Humanoid
Burnaby, BC
- Full-time
As a Senior Test and Validation Engineer at Humanoid, you will be responsible for bringing new hardware subsystems into a functional, controllable, measurable, and integration-ready state,…
Added 15 hours ago
MC
Program Chief Engineer – Spacecraft Satellite Systems (35863)
Myticas Consulting
Canada
- Full-time
Program Chief Engineer – Spacecraft / Satellite Systems
Added 15 hours ago
H
Sensor Fusion Engineer
Hexagon
Calgary, AB
- Full-time
Hexagon’s Autonomy & Positioning division is looking for a Sensor Fusion Engineer to join our high-tech engineering and manufacturing company that is committed to customer service…
Added 15 hours ago
MC
Senior Mechanical Engineering Consultant (35428)
Myticas Consulting
Ottawa, ON · Kanata, ON
- Contract
Seeking an experienced Mechanical Engineer to provide onsite engineering support for the development of advanced hardware platforms and optical communication products. The consultant will…
Added 15 hours ago
HA
Sensor Fusion Engineer
Hexagon Autonomous Solutions
Calgary, AB
- Full-time
Hexagon’s Autonomy & Positioning division is looking for a Sensor Fusion Engineer to join our high-tech engineering and manufacturing company that is committed to customer service…
Added 15 hours ago
AM
Manufacturing Development Engineer
Arbutus Medical Inc.
Burnaby, BC
- $115,000 to $125,000 CAD / year
- Full-time
This is a broad, high-impact role for an engineer who enjoys getting deeply involved in how products are designed, built, tested and ultimately manufactured. You will work alongside R&D…
Added 15 hours ago
EI
Mechanical Test Engineer / Test Technician
ExcelGens, Inc.
Mississauga, ON
- Contract
Job Title: Mechanical Test Engineer / Test Technician
Added 15 hours ago
BP
Manufacturing Development Engineer - Arbutus Medical
BLANKSLATE Partners
Remote, Canada
- Full-time
- Remote
This is a broad, high-impact role for an engineer who enjoys getting deeply involved in how products are designed, built, tested and ultimately manufactured. You will work alongside R&D…
Added 16 hours ago
A
Systems Engineer (Open Interest)
Actalent
Ottawa, ON
- $45 to $65 CAD / hour
- Full-time
Coordinating activities across software, hardware, electrical, mechanical, and test teams
Added 17 hours ago
GC
Sr Project Engineer
GDKN Corp.
Mississauga, ON
- Contract
Responsible for the completion of Test Engineering projects.
Added 17 hours ago
TC
Process Engineering Specialist
Toromont Cat
Bradford, ON
- Full-time
Develop, test, and troubleshoot robot programs for automated production tasks. Rapidly prototype tooling and fixturing to support automation, improve safety and turnaround time. Assist with…
Added 17 hours ago
P
Electronic Hardware Engineer
Percucision
Montreal, QC · Greater Montreal Metropolitan Area
- Full-time
Integrate and validate sensors and embedded components, troubleshooting issues across electronics, wiring, firmware, mechanical integration, and test setups.
Added 18 hours ago
H
Senior Test & Validation Engineer
Humanoid
Burnaby, BC
- Full-time
As a Senior Test and Validation Engineer at Humanoid, you will be responsible for bringing new hardware subsystems into a functional, controllable, measurable, and integration-ready state,…
Added 18 hours ago
A
Senior Mechanical Engineer (Onsite)
Alchemy
Waterloo, ON
- $100,000 to $130,000 CAD / year
- Full-time
We're hiring a Senior Mechanical Engineer to take our automotive products from design intent to repeatable production. Our products are precision-fit: each one is engineered to a specific…
Added 20 hours ago
WC
Concepteur électrique / Electrical Designer
Wabtec Corporation
Montreal, QC
- Full-time
Added 21 hours ago
RM
Qualification Test Engineer
Richards Manufacturing Company
Low, QC
- Full-time
Performs the qualification test for Low and Medium Voltage products, ensuring that all products meet the highest standards of quality and performance.
Added 21 hours ago
CM
Propulsion Engineer
Carter Murray
Montreal, QC
- $75,000 to $150,000 CAD / year
- Full-time
Our client is seeking a Propulsion Engineer to support commercial aircraft engine maintenance, repair, and overhaul (MRO) operations, with a primary focus on CFM56 engines. This role is…
Added 22 hours ago
Systems Engineer
L3Harris Technologies
Montreal, QC
Prepare and perform test procedures for procured and designed equipment
Added 23 hours ago
CF
Building Operator II (Office)
Cadillac Fairview
AB · Calgary, AB
- Full-time
…lubrications, minor part replacement and trouble shooting of minor mechanical/electrical in adherence with local electrical fire and safety codes to maintain equipment in good working order…

Percucision

Electronic Hardware Engineer

Greater Montreal Metropolitan Area, QC, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Nov 4, 2026
Experience: Ideally 1–5 years of relevant electronics, PCB, or embedded hardware experience.
Posting language: English
Posted: Oct 5, 2026

Original job description

About Percucision

Percucision is a Montreal-based medical technology company developing a next-generation Class II medical device designed to improve how clinicians acquire and use physiological measurements at the point of care.

We are a small, fast-moving team working across mechanical, electrical, software, biomedical, and clinical development as we move our technology from prototype development toward design verification, regulatory submission, and commercialization.

We are looking for a full-time Hardware Engineer who wants to take meaningful ownership of the electronics and PCB architecture of our medical device. The role is centered on hardware design, board-level integration, sensor interfaces, bring-up, troubleshooting, and verification, with firmware used as a supporting tool for hardware development and validation.

Professional engineering licensure (P.Eng./ing.) or eligibility for membership with the Ordre des ingénieurs du Québec (OIQ) is strongly preferred.

The Role

This is a hands-on electronics and embedded hardware role with significant technical ownership.

You will help lead the design and development of the electronic hardware inside our medical device, from system architecture, schematic capture, component selection, and PCB design through board bring-up, debugging, integration, and verification. Your work will include microcontrollers, power supplies, analog and digital signal chains, sensors, communication interfaces, connectors, and the supporting circuitry required to build a robust and manufacturable product.

A strong ability to read and interpret component and sensor datasheets is essential. You will be expected to translate specifications such as pinouts, timing requirements, electrical characteristics, power needs, communication protocols, calibration requirements, and environmental limits into practical hardware design decisions and validation plans.

You will also work with embedded firmware when needed for board bring-up, sensor configuration, data acquisition, and troubleshooting, but the primary emphasis of this role is hardware and PCB design.

As part of a lean engineering team, you will have visibility across the complete product and contribute to technical decisions that directly influence performance, reliability, manufacturability, verification, and regulatory readiness.

For candidates with professional engineering licensure, the role may also include greater responsibility for engineering review, technical oversight, and professional engineering activities within their area of expertise.

What You’ll Do

Own or contribute directly to electronic system architecture, schematic capture, component selection, PCB design/layout review, and prototype iterations.
Design and validate power regulation, analog and digital circuitry, sensor interfaces, microcontroller connections, communication buses, connectors, protection circuitry, and supporting electronics.
Perform detailed datasheet reviews and translate component requirements into practical circuit design, PCB, integration, and validation decisions.
Bring up and debug prototype PCBs using oscilloscopes, multimeters, logic analyzers, bench power supplies, debuggers, soldering/rework equipment, and other laboratory tools.
Integrate and validate sensors and embedded components, troubleshooting issues across electronics, wiring, firmware, mechanical integration, and test setups.
Use and modify embedded C/C++ firmware and Python tools as needed for board bring-up, sensor configuration, data acquisition, debugging, and automated testing.
Support design verification, engineering reviews, risk management, root-cause investigations, technical documentation, and traceability within a regulated medical-device development process.
Collaborate with mechanical, software, quality, regulatory, clinical, and manufacturing partners to move designs from prototype through verification and commercialization.

What We’re Looking For

Degree in Electrical Engineering, Electronics Engineering, or a closely related engineering discipline.
Ideally 1–5 years of relevant electronics, PCB, or embedded hardware experience. Recent graduates with a Master’s degree in Microelectronics, Embedded Systems, or a closely related field are also strongly encouraged to apply.
Hands-on experience with PCB and circuit design, including schematic capture, component selection, board bring-up, and hardware debugging; experience with Altium, KiCad, or similar tools is an asset.
Strong understanding of analog and digital electronics, power supplies, grounding, signal integrity, sensor interfaces, microcontrollers, and common communication protocols such as I²C, SPI, UART, USB, and BLE.
Excellent datasheet interpretation skills and the ability to turn component specifications into sound hardware design and test decisions.
Comfortable using oscilloscopes, multimeters, logic analyzers, debuggers, soldering/rework tools, and general electronics lab equipment.
Working knowledge of C/C++ and Python for hardware bring-up, sensor communication, testing, and debugging; deep application-software experience is not required.
Strong problem-solving, technical documentation, and multidisciplinary collaboration skills.
P.Eng./ing. and OIQ membership strongly preferred, or eligibility to obtain professional licensure.
Experience with medical devices, regulated products, or formal design-control environments is an asset.

Bonus

Experience in any of the following would be considered an asset:

Mixed-signal, analog front-end, or low-noise sensor circuit design
Low-power embedded hardware and battery-powered device design
PCB layout, design for manufacturability (DFM), design for test (DFT), and production handoff
EMC/EMI, ESD protection, grounding, shielding, and pre-compliance troubleshooting
STM32, nRF52, ARM Cortex, or similar microcontroller platforms
Bluetooth / BLE hardware integration and RF considerations
Physiological, biomedical, pressure, optical, or other precision sensor interfaces
Signal processing and sensor validation
Hardware-in-the-loop and automated hardware verification
RTOS-based embedded development or firmware debugging
Medical devices or other safety-critical / regulated products
IEC 60601 electrical safety / EMC concepts
ISO 13485 quality-management systems
ISO 14971 medical-device risk management
FDA 510(k) or Health Canada medical-device development environments
Previous responsibility for engineering design reviews or technical approval in a regulated environment

Why Percucision?

Build electronic hardware intended for clinical use in healthcare.
Take real ownership of PCB architecture, circuit design, sensor integration, board bring-up, and hardware verification.
Work across electronics, embedded systems, mechanical integration, testing, manufacturing, quality, and regulatory development.
Influence technical decisions directly within a small, multidisciplinary engineering team.
Contribute to engineering review, technical oversight, verification, and design decisions.
Help bring a medical device from prototype through commercialization.
Montreal-based with in-person collaboration.

We’re looking for someone who enjoys designing circuits, reading datasheets, building and debugging hardware, solving complex technical problems, and taking ownership of challenges from initial concept through validated implementation.

Apply About employer

More about this job

Responsibilities

Design and develop electronic hardware for a medical device, including system architecture, schematics, component selection, PCB design, sensor integration, and prototype bring-up. Debug and verify hardware, use firmware and Python tools as needed, and collaborate across engineering, quality, regulatory, clinical, and manufacturing teams to support commercialization.

Requirements

A degree in Electrical Engineering, Electronics Engineering, or a closely related discipline is sought, along with ideally 1–5 years of relevant experience; recent graduates with a related master’s degree are also encouraged to apply. Candidates should have hands-on PCB and circuit design experience, strong electronics and datasheet skills, familiarity with lab equipment and embedded C/C++ and Python, and preferably P.Eng./ing. licensure or eligibility for OIQ membership.

Skills

PCB Design
Circuit Design
Hardware Bring-Up and Debugging
Analog and Digital Electronics
Sensor Interfaces
Microcontrollers
Power Supplies
Datasheet Interpretation
Embedded C/C++
Python
Hardware Verification
Signal Integrity
Communication Protocols
Design for Manufacturability
Medical Device Development
Technical Documentation

Visa sponsorship

Not detected in the job text

Keywords

Electronic Hardware
PCB Design
Schematic Capture
Component Selection
Altium
KiCad
Analog Electronics
Digital Electronics
Power Regulation
Signal Integrity
Sensor Interfaces
Microcontrollers
I²C
SPI
UART
USB
Bluetooth Low Energy
Embedded C/C++
Python
Oscilloscopes
Logic Analyzers
Board Bring-Up
Design Verification
Design for Manufacturability
EMC/EMI
IEC 60601
ISO 13485
ISO 14971
Medical Devices
OIQ

Report this job